bottle rinser machine used for sale

Bottle washing machine Klinger Capacity: approx. 3.000 bph Year of manufacturing: 2020 Bottles: up to 1,0 ltr. wide mouth bottles The machine will be heated by steam incl. label removal system Machine condition: like new

A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet., Additional title: single-ended machine for cleaning glass bottles, Operating hours: 5259, Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h, Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs., Processing time: 14,14 min, Heating / Cooling: 1.352.712 kJ/h, Water: 7,92 m³/h, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position:  ...

For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Technical data: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Univar 10 automatic moulding machine for profiling and milling windows and doors, individual components and similar items with circumferential profiles, including a mechanism for single-person operation Units: Technical data: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bottle formats: diameter approx. 20–40 mm, height approx. 45–70 mm, depending on the format set Capacity approx. 6000 bottles/h With format set for round bottle Ø 24 mm x length 52 mm Feeding hopper with lifting device Alignment for the correct positioning of the bottle on the conveyor belt (e.g. filling machine) 240V/50 Hz

automatic two-side (front&back) labelling machine, PMR operation system OP3000, newer used, new 2022

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

Machine base soil tillage machine, floor cleaning machine, floor curing machine -Manufacturer: Minuteman, Multi-Clean machine base tillage machine -Type: 670691 UV-8 Power Supply -Voltage: 230V -Dimension: 600/440/H370 mm -Weight: 29 kg

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...

Rubber balls as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 30mm Material: EPDM, NR/SBR, silicone, PUR, silicone (detectable), polyurtehane (detectable) Quantity: 1 pack (100pcs) possibly small quantities Price: On request (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly with minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 996 7 1496 7 1996 Material: NBR/SBR 408 RED and NBR 60 HELL Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Struts Tumble screening machine as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 25 by 6mm Material: NBR (FDA) Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Hoses and clamps as wear material for your screening machines, vibrating screening machines, tumble screening machines: Hose: Size: Length 425mm Material: NR/NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Struts / rubber spring tumble screening machine as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: Length 425mm Material: NR/NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Dampers / damping elements as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 50x50 / 60x60 with M10 Material: NBR 45 +/- 5 Shore Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

U-profile seal IL (internal) as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 600 / 800 / 1000 / 1200 / 1400 / 1600 / 2000 / 2600 / or on request by the meter Material: NBR/NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

U-profile seal IL (internal) as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 600 / 800 / 1000 / 1200 / 1400 / 1600 / 2000 / 2600 / or on request by the meter Material: NBR/NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Storage system in custom-made design for your sieve bread and screen frames: Size: 600 / 800 / 1000 / 1200 / 1400 / 1600 / 2000 / 2600 Material: Steel + powder coating also Customized Price: On request

Forming and/or portioning machine for a wide variety of malleable masses This machine can be used to produce products in an infinite number of individual shapes with a flat bottom. We used the machine to portion our date chocolates. - Tabletop device – compact and space-saving - For small to medium production capacities - Fully automatic operation - Easy tool change and quick cleaning - Cost-effective forming rollers can be ordered TECHNICAL DATA: - Year of construction: 2021 - Condition: very good (Nov. 2025 fully serviced) - Dimensions (L×W×H): 750 mm × 550 mm × 940 mm - Weight: approx. 81 kg - 85 kg - Working width: 95 mm - Voltage: 230 V / 50–60 Hz / 16 A - Drive power: 0.5 kW - Control voltage: 24 V/DC PERFORMANCE (calculated with marzipan mass) – Volume (m³/h): 0.113 – Mass (kg/h): 128 – Number of units (pcs/h): 7,066 (bar: 80/20/1 ...

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

New/Unused Auction-ID: A3-46126-12293

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

Antike Falzmaschine - Antique Machine folding machine Brehmer 1/504 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test