136,402 used machines on RESALE, but how to find them? Machine Search
Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.
TWO SPINDLE BORING MACHINE Sr. No.: 71179 Equipment / Additional information: Tools
Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg
Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm
NEW column boring machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via central knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting power (depending on the slope): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Extension (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack - Spindle speeds infinitely variable (1/min): 20 - 2000 - Dimensions (mm): 430 x 715 x 1800 3-year warranty for single-shift operation Further TECHNICAL DATA can be found in the product sheet! DELIVERY: free house incl. packaging NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR AN OFFER! FLOTT STUE ...
The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw ...
Unclinking machine, little used Notching machine , lessly used Type: VA 200/ 4 Built / yom: 1995 Manufacturer / make: KEMPFLE Table size: 1000 x 800 mm Power:/ capacity: 4 mm / for steel / steel 400 Nm/mm 3 mm for stainless steel 600Nm/mm Length of cutter blades: 205 mm Number of Strokes/ strokes: 60 per minute Cutting head/ cutter head: 30...135° (stepless) Weight / weight: 1.15 tons Connection value/ connected power: 4 kW
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Grinding discs: max. Ø 360 mm x 40 mm -Operating voltage: 380 volts -Dimensions: 760/450/H1080 mm -Weight: 200 kg
Technical data: - bending and rolling by hand, - max working width 1020 mm - max. material thickness St 40 1.25 mm - Bending angle adjustment via end stop 10 - 180 ° - max hub upper cheek approx. 85 mm - max. adjustable bending cheek 20 mm - Shaft diameter 55 mm - Upper shaft can be swivelled - Rear shaft parallel + obliquely adjustable - Space requirement approx. W 1500 x H 1400 x D 750 mm - Weight approx. 400 kg
Technical data: - Threaded drilling capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Tool quick change holder size 2 diameter 31 - various inserts for tool quick-change recording - Table area with 5 T-slots 2050 x 900 mm . Table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chuck 250 mm - Pneumatic connection with pressure reducer - mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg
Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg
Table clamping area: 290 x 1250 mm Table movement x: 800 mm Table movement y: 360 mm Table movement z: 450 mm Milling head pivotable: 90/45 ° Spindle holder: ISA 40 Spindle speeds: 56 - 4500 rpm Pinolene stroke: 125 mm Pinolene feeds: 0.035; 0,14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirement: 2000 x 1900 x 2300 mm Weight: 1700 kg
- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request
CNC Engraving Machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technical0.321020121002 Data: Table size 700 mm x 480 mm Weight: 50 kg Exterior dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories: Computer Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve Spray Mist With this, versch. Collet and cutter - NEW
Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos -Sale: only complete set -Weight: 40 kg
Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 950 E -Power: 2.4 kW -Plate diameter: 790 mm -Transport dimensions: 1190/1000 / H1410 mm -Weight: 87 kg
Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 900 E -Power: 1.5 / 1.8 kW 1400/2850 rpm -Plate diameter: 835 mm -Transport dimensions: 1200/1000 / H1260 mm -Weight: 81 kg
Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg
Merli Clovis 70 heavy lathe. Distance between centers: 8000mm. Swing: 1650mm. Swing in carriage: 1170mm. Bore: 206mm. Bed width: 1000mm. Speeds: 16.(3-300). Maximun weight without steady rest: 15.000Kgs. Maximun weight with 1 steady rest: 20.000Kgs. Equipped with chuck of 1400mm. Equipped with DRO. Equipped with 2 steady rest. Equipped with CE protections and CE certificate for second hand machines.
Welding rectifier, electrode welding machine, electrode welding rectifier -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A -Welding cable with electrode clamp -ground cable -Dimensions: 860/680/H650 mm -Weight: 164 kg
Notching milling machine -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm
Machine vise, sturdy vise, drill vise -Machine vice: rotatable -clamping jaws 240 x 60 mm -Clamping depth: 285 mm -Dimensions: 630/315 / H200 mm -Weight: 73 kg
Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg
Pasta and automatic machine Fortuna head machine KM 4 used Fortuna head machine KM4, 4-row with flour. Easy cleaning of the parts because easily accessible. Capacity up to max. 4800 pieces/hr weight range of the head machine between 35-80 grams. Divide and act of dough as if by hand. Payment and shipping on request. 4-row Weight range 35-80 grams Hourly capacity max. 4800 pcs. Flour spreader mobile on wheels
Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg
Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg
On-seat scrubbing machine, Ground sweeper Brand: Tennant Type: 7300 Hours of operation read: 1951 h Electric motor Battery: 36V Charger Operating instructions Ready to drive.
TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...
Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across ...
Steel stairs, external stairs, machine stairs, machine ascent, extension stairs -Machine stairs: stable design, as machine access -Material: VA -Step height: approx. 310 mm -Height: upper step approx. 1680 mm -Transportation dimensions.: 1770/535/H190 mm -Weight: 29 kg
Machine vise, heavy duty vise, drill press vise -Machine vise: rotatable -Clamping jaws 200 x 40 mm -Clamping depth: 300 mm -Dimensions: 630/325/H200 mm -Weight: 82 kg
Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 265 x 70 mm -Clamping depth: 285 mm -Dimensions: 620/300/H210 mm -Weight: 81 kg
Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower
Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg
Slicer WABÄMA: knives thickness 9 mm, new knives; power 0.5 kW/380V semi-automatic lubrication; automatic adjustment of the height at the upper plate of bread;
power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.
Diosna SPV 240 AF/T - Spiralkneter mit 2 kessel auf frage moglich mehr kessel - Bottichwandabstreifer mit Temperaturfühler - sterung mit program speichren - sehr leiser Betrieb - Maschine wie neu
Used spiral kneader with extendable tank car BOKU, type: SK 160 -bakery condition - 2 pieces of kneader and 4 pcs. boiler available - for 160 kg dough or 100 kg flour - Kneading arms interchangeable - Condition good, ready for immediate use The company DIOSNA has taken over the area of BOKU. BOKU dough kneaders are still made. THE service and spare parts offer DIOSNA. Sightseeing and test run are possible by arrangement.
Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg
Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Abutment: for milling machines -Dovetail: 220 to 165 mm -Bore: Ø 85 mm -Dimensions: tech. Drawing with the photos -Dimensions: 400/145/H290 mm -Weight: 13.5 kg
TIG welding machine -Nimak electrode unit -Dalex converter -Hose package -ground cable
New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT
Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Tecna, Spot welding machine: Type 4161 -Rated power: 31 kVA -Operation: via foot pedal -Dimensions: 780/250/H1500 mm -Weight: approx. 130 kg
Used spiral kneader KEMPER, type: ST 30 -Completely overhauled- - for 30 kg flour or 48 kg dough - technical condition: very good - completely overhauled - 6 months warranty Confession and test run are possible by arrangement.
machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice drilling machine vice -Clamping jaws: 100 x 45 mm -Clamping depth: 75 mm -Dimensions: 230/140/H60 mm -Weight: 2.7 kg
Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg
Machine vise, heavy duty vise, drill press vise -Handover: in the current condition as seen -Base plate: See photos for damage -Machine vice: rotatable, clamping jaws 160 x 40 mm -Clamping depth: 185 mm -Dimensions: 445/225/H145 mm -Weight: 33 kg
Cutting Machine Fruit & Vegetable Shredder Herb cutter herb cutting machine for e.B. red cabbage, white cabbage, blue cabbage, Used Manufacturer: Gevaar Cutting chamber approx.: 800 mm Rotor/cutting disc approx.: 700 mm Filling flap approx.: 900 x 800 H 300 mm Filling flap adjustable via Pfaff winch Outlet approx.: 800 mm Vector RF60-DV112M-4 Drive Motor 220/380 v, 15.2/8.7 A, 50 Hz Power 4 kW, 275 r/min Total approx.: 2000 x 1200 H 2300 mm Weight: 421 kg Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.
maximum number of results exceeded
please refine your search
