138,066 used machines on RESALE, but how to find them? Machine Search
with vacuum pump speed-controlled FU with double coat Panel mobile cart Temperature gauge Manual Spare parts Dimensions LWH: 1000 x 700 x 1300 mm Weight: approx. 150 kg
The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine and the level of modernity ensure many years of operation.
Wampfler GS 21-05/1812/04ML/LT Slip Ring Assembly GS 21 Technical details: • Manufacturer: Wampfler • Type: GS 21-05/1812/04ML/LT • Year of construction: 2003 • Degree of protection: IP54 • Version: 4 × 250 A + PE (660 V), 12 × 25 A (690 V), 4 × 20 mA (10 V) Description & Use: Slip ring assemblies for the safe transmission of energy and signals in rotating applications, including in: •Cranes • Lifting and conveying technology •Wind turbines •Mechanical engineering Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
Weibert FR3 Saw milling Demonstration device Format sliding table 2300mm or 2600mm Cutting height: 103mm Auslegertich kpl. Saw blade: swivel, max.315mm 3KW motors Milling: rigid 90° Milling rpm: Speeds: 1500/3500/6000/8000 rpm. Safety rails milling stop 500mm Right- and left-hand-running milling cutter WJ-400100
AMOB MAH 40/3 CNC 3-roll bending machine was built in 2021 in Portugal by AMOB Group. The machine, designed for bending tubes and profiles, ensures the highest precision and repeatability of the produced parts. The machining process is performed by three hardened rollers, of which the upper roller has hydraulic adjustment. Each of these is driven by a reliable, high-power motor, which is located inside a fully welded body. This solution enables bending of even the most complex shapes both vertically and horizontally. All this is complemented by an advanced CNC control with memory for numerous programmes. The MAH 40/3 CNC tube and profile bending machine weighs 540 kg. Technical specifications of the AMOB MAH 40/3 CNC bending machine - control panel with CNC control - number of rollers: 3 - roller diameter: 148 mm - roller rotational speed: 12 rpm - number of shafts: 2 - shaft di ...
Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...
Butter Forming & Wrapping Machine Manufacturer: Trepko Type: XPG40 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k
SENTE MAKINA HDTF-SI tube forming machine was built in 2022 in Turkey by SENTE MAKINA İNŞ. SAN. VE TIC. LTD. ŞTI. The machine is used in the HVAC industry for the production of precision ventilation ducts, compliant with Eurovent and Smacna standards. Spiro ducts are created from thin sheets of metal with a maximum thickness of 1 mm. The innovative cutting system eliminates the noise and hot sparks typical of traditional saws, guaranteeing smooth edges without the need for additional deburring. The HDTF-SI duct forming machine weighs 2480 kg. The SENTE MAKINA spiral duct machine is fully complete and consists of the following components: – main frame – sheet metal decoiler – forming heads (2 pcs.) – cutting system – stitching roller system for different sheet thicknesses – unloading table (2 pcs.) Technical data of the SENTE MAKINA HDTF-SI spiral tube machine ...
Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK
Technical Specifications - Bridgeport Series I Table Size / Work Surface 9" × 49" (≈ 299 mm × 1245 mm) T-slots 3 pieces, spacing 2.5" (≈ 64 mm), groove width 0.625" (≈ 16 mm) Travel X (Transverse) without Power Feed: 36" (≈ 914 mm) with power feed: 33" (≈ 838 mm) Travel Y (Transverse to Feed) 12" (≈ 306 mm) Quill Stroke (Drilling Spindle Stroke) 5" (≈ 127 mm) Knee Lift (Z-Axis of Table) 16" (≈ 406 mm) Ram Adjustment (Head Stem on Ram Slide) 12" (≈ 306 mm) Min. / Max. distance spindle axis to table nose (spindle/table nose distance) min: 2.5" (≈ 64 mm) Max: 18.25" (≈ 463 mm) Min. / Max. distance spindle to column front (minimum/maximum internal width) min: 6.75" (≈ 171 mm) max: 18.75" (≈ 476 mm) Spindle / Quill Spindle Diameter: 1.875" (≈ 48 mm) Quill Diameter: 3.375" (≈ 86 mm) Spindle holder (standard): R-8 Spindle motor / power 30 minute ...
Make Benhil Model: 8311 Junior Usage: Butter filling & wrapping Capacity: Up to 40 packages/min Product weight: 250 g Hopper with 2x screw augers Aluminium hopper and augers & Stainless Steel Hopper Condition : Good
[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears
Machine: Benhil Multipack 8304 mini portion Capacity: up to 110 packets/min Pack size: 7,5, 10, 12,5 gram Dimensions: 30 x 40 x height adjustable max 20 mm Product: Butter / Margarine Wrap material: Aluminium foil Dimensions: Approx. 200 x 150 x 200 mm (l x w x h) Weight: 1.400 kg (gross) Electricity: 1.1 kW
Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!
Technical data Information on the technical equipment of the machine Length: 10509 mm Height: 2806 mm Total weight: 9500 kg Max. Printing speed: 11,000Dr/h Printing material width: min. 130 mm, max. 265 mm Print width with print mark: max. 254 mm Format length: max. 254 mm (10") Unwinding roll diameter: max. 1040 mm Unwinding spindle: 3" (max. 300 kg) Rewinder Spindle: 3" Grid Winding Spindle: 3" Reel diameter: max. 300 mm Grating trigger Roller diameter: max. 800 mm Components of the machine - Unwinder -Web trimming / edge trimming - Web edge control -Ionization device - Touch screen control panel - 2x Letterpress Printing Unit - 1x painting unit (Flexo) -Loop box - -Rotary die cutter with the following magnetic cylinders (Z72, Z74, Z76, Z78, Z80, Z84, Z88, Z92, Z96, Z100, Z104, Z108, Z112, Z116, Z120, Z124) - Wire mesh winding unit - Outlet part - C ...
McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.
Machine name: Injection moulding machine used Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year of Make: 1991 Operating hours: 2000 h Drive motor:15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Curb weight: 3400 kg Tech. Documentation: Yes Remark: General data: Dry running rate: 40 min, Pump drive: 15 KW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Stroke: 116 cm3, Screw stroke: 120 mm, Moulded part weight max.: 99 g, Injection flow max.: 505 g/s, Injection capacity calcane: 15 KW, Plasticising flow: 29 g/s, Screw length: 22 LID, Screw speed max.: 430 min, Screw torque max.: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle press force: 65 kN Clamping unit: Clamping force: 500 kN, Tool opening distance: 350 mm, Tool installation height min.: 200 mm, Plate spa ...
Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg
CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With path control MILL PLUS iT Year of Make: 2006 Travel: X 800 Y 800 Z800 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine positions as a double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting IKZ – 40 bar Conveyor Rotoclear Tool Measurement BLUM Laser 3 D Probe Heidenhain TS 641 Operating mode 3 + 4 Electronic handwheel 3-Piece Height Adjustable Machine Shoes Transport device Operating instructions
Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg
1 of used film-only multi-packer, make KHS, type Innopack Kisters SP 050 B2, new 2013. Operating side: links. Used for PET bottles 250/500 ml as 3x2=6-packs (dual lane) and 6x2=12-packs as well as 6x4=24-packs (single lane) in clear or print-registered film. Quick change-over via servos and spindles. Capacity upto 50 cycles per minute. Siemens S7 controls.
NOVICK AF1300 die-sinking EDM was built in 2012 in China by Novick Digital Equipment Co., Ltd. The machine is used to produce parts with complex geometries that have applications in, among others, aviation and aerospace industries. The machining process is performed by means of electrical erosion, which minimises or completely eliminates the need for other secondary processes, such as polishing. The combination of a full closed-loop control system and dual feedback compression, in turn, guarantees exceptional machining accuracy in even the most demanding applications. The NOVICK AF 1300 sinker EDM weighs 2300 kg. Technical specifications of the NOVICK AF 1300 die-sinking EDM - feed in the X/Y/Z axis: 520/300/300 mm - work table dimensions (L x W): 600 x 400 mm - generator: NOVICK 560F - power: 10 kVA - power supply: 3x 380 V; 50/60 Hz - weight of the NOVICK AF1300 machine: 2300 ...
Ger RHC1500 Universal Rectifier. Indoor head. Distance between points: 1500mm. Maximum part diameter: 355mm. Point height: 180mm. Tooth diameter: 400mm. Power: 7.5hp. Weight: 4500Kgs.
Parts cleaning system Industrial washing machine degreasing made entirely of stainless steel! Manufacturer Render Type W175 Built: 1994 5 loading trolleys with 5 washing baskets, Basket size 1,125 x 1,125 mm Manual workstation with viewing window on one side with integrated high-pressure cleaner. Machine to be loaded/unloaded from both sides! Machine comes from an operating resolution and was in use until dismantling. Tank capacity approx. 2,000 litres, oil scimmers, filters, high-pressure pumps... Vertical door opening (lifting doors) on two opposite sides. This allows you to load on one side and unload on the other side. Due to the very high inner height, the system offers an optimal possibility to accommodate both very heavy laundry material as well as parts with large dimensions.
No 2 circular blades motors HP 3 - 2800 rpm No 5 drilling units motors HP 1 - 2800 rpm No 1 conveyor belt feeding machine HP 0,5 - 1400 rpm Pneumatic movements with hydraulic brake Stacking / Destacking device with pneumatic cylinders Electro-pneumatic machine control with PLC: Overall dimensions: -Length Mm: 2500 (useful for cutting and drilling) -Height Mm: 1400 -Width Mm: 1800
Heavy two-sided planing machine in special design - used (overhauled in 2015), . The machine is designed for demanding suitable for machining slats and beams. SPECIFICATIONS Work dimensions: Working width: up to 220 mm Working thickness: 20 - 80 mm Working length: min. 1,500 mm Table height: 900 mm Feed speed: 20 – (120) m/min. The machine will run at Tilly max. 60m/minute Drive motors Dressing shaft: 22 kW Thickness shaft: 30 kW Feed: 7.5 kW Lifting gear motor: 1.5 kW Tool: Horizontal shaft speed: 5,000 rpm Diameter of the tools: Horizontal shafts: 200 mm Chip removal: The maximum decrease depends on the feed speed of the workpiece width, wood texture, installed drive power and the depends on the desired surface quality. For specific information, please for your inquiry. Dressing shaft: up to 10 mm with full working width approx. 2.0 mm Thickness shaft: up t ...
Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.
Band saw Jespa 340/630 HAP column guided Band saw Jespa Semi-automatic Type 340/630 HAP Column-guided Built in 2009 Saw blade length 5.150mm
Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active
running direction: right - left for 28 mm VacuVent closure with safety housing
Reference ID: PP-53194 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SP 104-ER Year Built: 1996 Color:- Impression:- Working Hours: 64,000 Speed: 8,000 sheets/hour Max. Size: 1039 x 740 mm Min. Size: 399 x 350 mm Condition: Good Location: Europe Availability: - Machine Description Feeder & Infeed Non-stop (manual/automatic): Manual Non-stop infeed bars (mm): 18 Non-stop bars coating (Chrome/Teflon/Standard): Standard Non-stop bars equipped with air pressure (Y/N): No Non-stop bars with lateral shifting (Y/N): Yes Lateral register available (Y/N): No Register type (POWER/ACCU/LATERAL/MECHANICAL): n/a Register mark width (1 mm): n/a Reading from (Top/Bottom/Both): n/a Front margin – standard/light sensor: Yes Mechanical front margin (25, 60, n/a): 25 Upper transport belts on infeed (corrugated): No Detection sheet direct ...
Nilfisk T30S Industrial Vacuum Cleaner - Used, Tested & Ready to Use - Top Condition! For sale is a powerful Nilfisk T30S industrial vacuum cleaner, ideal for workshops, production, construction and industrial applications. Specifications: • Model: T30S • Year of manufacture: 2011 • Voltage: 400 V / 3 phases • Power: 3.0 kW / 400 V, 50 Hz, 2840 rpm, 3 phases, 6.6 A, cos phi 0.90, Iso F, S1, IP55 • Container volume: approx. 100 litres • Vacuum -220 mbar, 130 m³/h Overpressure 278 mbar, 120 m³/h • Filter type: cartridge filter • Weight: approx. 103 kg • Condition: used, fully functional Scope of delivery: • Vacuum cleaner Nilfisk T30S •Hose • Original chassis Condition: The device has been tested – motor runs smoothly and powerfully. Filters and containers were cleaned. Shipping / Pickup: • Pick-up preferred (heavy equipment) ...
Pass width mm: 1300 02 Engines KW: 1 + 1 02 Brushes Brush diameter mm: 300 Vacuum table Control cabinet KW: 8.5
Grinding units Grinding belt length mm: 8000 Grinding width mm: 120 Feed max: 2200 m/min Manipulation unit Max machining range mm: 2100x650x400 Total connection kW: 7.2
Double Z kneader / Sigma kneader Topos Used Double Z Kneader Topos 250 L – Sigma Kneader – - Kettle Kneader – Dough Kneader - Industrial Kneading Machine – Stainless Steel – Overhauled and Function Tested Robust stainless steel construction, powerful drive, ready for immediate use. The Topos double Z-mixer with a usable volume of 250 litres is a robust and powerful industrial machine for highly viscous mixing and kneading processes. Thanks to its solid kneading arms, it ensures even mixing of viscous media and doughs. Industrial materials such as doughs, sealants, paints, adhesives, raw ceramics or chemical mixes. The machine was designed for continuous industrial use and impresses with its stable design, durable design and easy-to-clean stainless steel design. - Make Topos, built around 1965 - Completely overhauled in 2018. Function-tested. - Easy ope ...
Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 3 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 24 SH - 15 KW Blow-off device Vacuum table Scotch Brite x mm 200 Machine Control: Viet "IPC 15" Touch Screen Centering device Weight Kg: 3970
Pass height max mm: 2000 Battery: 24V Chargers: automatic and high-frequency Automatic reading of the charging height: Reflective light barrier Total power: 0.75 KW
Flake Ice Machine / Rotary Evaporator with Silo Manufacturer: MAJA Type: RVH 1500 CO2 The flake ice generators of the MAJA RVH series can be integrated into refrigeration concepts that are designed for environmental compatibility and sustainability. Specifications: Year of Make: 2019 Ice capacity approx. 1500 kg / 24h Dimensions of the entire facility: width 175 cm / depth 130 cm / height 230 cm Weight approx. 450 kg Electrical connection 3AC/50Hz/400V/PE0.28 kW Control: Maja Touch Panel (optional) Refrigerant required: R744 Function checked / machine ready for immediate use! Condition and accessories see original pictures! If you have any questions, email or call.
Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 4 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) 01 Orbital grinding unit "Spinbrush" - KW 4 (INV) 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) Machine Control: Viet "IPC 15" Touch Screen Blow-off device 1 Blow-off device 2 Vacuum table Scotch Brite Weight KG: 7200
used
The SIP Sirius 7 is a high-precision fixed-bridge Coordinate Measuring Machine (CMM) designed for dimensional inspection and quality control in manufacturing environments. Sirius 7 is known for its robust construction and hydrostatic bearing system, ensuring smooth and accurate measurements. Key Specifications • Measuring Range: 1,000 mm × 1,000 mm × 800 mm (X × Y × Z) • Accuracy: ±4 µm (micrometers) • Repeatability: ±2 µm • Guide System: Hydrostatic bearings • Temperature Compensation: Yes • Control Type: Manual (standard), with options for digital or CNC control systems • Probe System: Typically equipped with Renishaw or similar touch-trigger probes • Software Compatibility: Compatible with various metrology software platforms, including PC-DMIS and others
Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee
Sweeping width mm: 880 Number of brushes: 2 Weight: Kg 646 Total connection KW: 3
Reference ID PP-53278 Category Flatbed Die Cutter Manufacturer Wook Model WTNS-2500 SF Year Built 2008 Color- Impression- Working Hours - Speed 1600 sheets/h Max. size 2500 x 1500 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description Maximum die-cutting pressure: 600 tons Power supply: 400V, 50Hz Prefeeder, fully automatic Brand: HF technology Model: MFS 2500 HBL, Model 2516 Maximum sheet size: 2500 x 1650 mm Minimum sheet size: 600 x 450 mm Maximum speed: 13,200 sheets/hour Maximum stack height: 2400 mm (minimum 500 mm) Maximum stack weight: 2000 kg Power supply: 400V, 50Hz Year of manufacture: 2011
used vertical hydraulic internal clearing machine with 3 clearing points in very good condition Pulling power:8.000 KG Clearance length: 1000mm Bgno2qtoyx Clearing: 3 pieces (4 pieces) Distance between clearing points:100mm Mounting diameter of the drawing heads3 x x 85mm Workpiece diameter: max. 1x 460mm / 2x 198mm / 3x 98mm Cutting speed: hydraulically infinitely adjustable from 1m/min up to max. 7m/min Return speed: hydraulically infinitely adjustable from 5 to max. 25m/min Space requirement of the machine (b x t x h) approx.:1400 x 2000x 3600mm (without service & operator environment) Power supply / connection value: 380Volt 50 HZ / 6.5 KW Accessories / Optional equipment: -manual and automatic clearing operation - Drawbridge for 3 clearing points - Workpiece table for 4 clearing points (only usable with special pullheads) - automatic tool feeder - tension dis ...
used
Impressions=0 m, Condition= Good , Availability= 2025-11-03, Size Max 76 x 106 Size Min 450 x 450 mm cardboard thickness 250-2000 gr/m2 Max corrugated thickness 5 mm Speed 6000 sh/h Pressure 300 tonn
maximum number of results exceeded
please refine your search
