bottle labeller used for sale

Moravek CW Carbonator & Bottle Filler. Twin-head machine. Various Prices as we currently have a few in stock. - Please Enquire Product is carbonated immediately product prior to filling. Range of bottle sizes from 0.2 litres to 2 litres capacity. Filling of glass bottles and P.E.T. bottles. Filling still or carbonated product. Suitable for a wide range of beverages including beer, wine, soft drinks, mineral water, cider and champagne. Simple to operate and flexible. Capable of carbonating at ambient temperature. Available with additional chilling, if required. Compact. Occupies minimal floor space. Integral product pump. Simple to change bottles sizes. All stainless steel construction. This is a second hand machine offered in good condition. For more information and more available stock please visit us at - advancedbrewing.co.uk

An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.

Fresh Milk Pasteurisation & Bottling Line General Overview: Complete fresh milk processing and bottling line, designed for small to medium-scale dairy production. The line covers the full process from separation and pasteurisation to homogenisation, filling, and final packaging of 1L PET bottles. All components are industrial-grade and suitable for continuous operation. Process Flow: - Milk separation - Pasteurisation (flash system) - Homogenisation - Buffering / storage - Bottle handling and filling - Sealing, labelling, coding, and packaging Main Components & Technical Specifications: - Milk Cream Separator - Make: Seital - Model: SE13X - Capacity: 2,500 L/h - Year of Make: 1993 - Plate Heat Exchanger – Flash Pasteuriser - Make: KMA - Model: K21-FS/4273 - Capacity: 2,500 L/h (heating from 8°C to 75°C) - Year of Make: 1998 - Homogenizer  ...

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

Top-up labeller from the manufacturer HERMA Item condition: as good as new Availability: immediately Output: Up to 20 pieces per minute (depending on the operator) Tolerances: ± 0.5 mm in the label travel direction ± 0.5 mm perpendicular to the label running direction Description of the labels Distance between labels: min. 2 mm Distance of the labels to the edge of the carrier tape: min. 1 ± 0.3 mm Label thickness: 40 – 100 μm Weight: 30 – 200 g/m² Carrier belt thickness: 23 – 120 μm Label material: Paper Single-layer and multi-layer Suitable for internal deflection with a diameter of 25 mm and External deflection with diameter 45 mm Material carrier strap: Paper or plastic Without punching With as few machine-compatible gluing joints as possible Breaking resistance longitudinally at least 92 N per 15 mm Beam bandwidth according to DIN ISO  ...

Empty Bottle Inspector Heuft InLine reflexx Release 9, Pre-sorting of the Heuft Spectrum SX TB 72 and the associated Gateway II (network connection) (output max. 72,000 bph; Built in 2009). The following types of bottles can currently be checked: • 0.33 l ale / green / KK • 0.33 l Ale / brown / KK • 0.50 l NRW / brown / KK • 0.50 l NRW / clear / SV • 0.50 l Euro / brown / KK • 0.33 l swing-top bottle / brown / embossing • 0.50 l swing-top bottle / brown The following checks are carried out: • Pre-sorting Heuft Spectrum SX TB 72: - Bottle shape - Bottle height • Empty bottle inspector Heuft InLine reflexx Release 9: - Sidewall inspection (inlet and outlet) - Muzzle inspection - Thread inspection - Soil inspection - Residual liquid (IR/HF) - Additional detection in the outlet for any sticking labels in the neck area - Test bottle detection T ...

Component Manufacturer / Model Year Capacity / Notes Condition Depalletiser "KETTNER PRESS UNI ABSCH Komm.Nr. 96/0143/037" — Can depalletising — start of line Good — annual overhaul Rinser (water / ClO₂) MEYER Typ: Hyet 2020 25,000 c/h Good — annual overhaul Filler — Isobaric CO₂ "KHS Inofill CAN DVD 50 (0.5L, 0.33L, Pint)" 2020 "25,000 c/h CO₂ atmosphere, foaming device, buffer tank" Very Good — 2020, annual overhaul Seamer FERRUM F 08 2020 25,000 c/h Very Good — 2020, annual overhaul Full Can Inspector "HEUFT SPECTRUM VX TI 36 Level control" 2020 "25,000 c/h Full level + quality inspection" Very Good — 2020, annual overhaul Tunnel Pasteuriser "NIKO Typ: 095.31.152.100.1 Nr. 41540/96" — Post-fill pasteurisation Good — annual overhaul Can Packer Included in line 2021 Multi-pack formation Good — annual overhaul Palletiser Included in line 2021 End ...

Complete PET Bottle Filling Line for Carbonated Soft Drinks Manufacturer: SIPA / PROCOMAC Year of Manufacture: 2009 Location: Germany Availability: Beginning October 2026 The line is currently in operation and can be inspected during production. Technical Details: Capacity: Approx. 12,500 bottles per hour Bottle Sizes: 500 ml, 750 ml, 1,500 ml Neck Finish: PCO 28 / 1881 750 ml additionally with sport cap (PCO 1881) Equipment & Features: 1. Blowing machine SIPA SFR 8 with 8 cavities incl. preform feeding system, incl. chiller but without preform unloading device and without high pressure compressor 2. Air conveyor GEA Procomac 3. Tribloc GEA Procomac 50 / 70 / 12 with 50 rinsing stations, 70 filling valves and 12head plastic screw capper, incl. complete clain room around the machine type ISO 5”, incl. two sorting units, incl. bottle drying station after the filler, incl. ...

On offer is a used counter-pressure bottle filler from the manufacturer Holdefleiss. As you can see in the pictures, the fountain pen is in a well-maintained and well-maintained condition and has been used in a small brewery so far. Technical data: - Manufacturer: Holdefleiss - YOC 1971 - 24 filling stations - Crown cap with 6 stamps - Height of the bottle plate to the centering bell filling device: 30 cm - Format: Euro bottle, NRW The bottle filler comes with extensive spare parts when you buy it. The technical documentation for the filler is also all available. If you have any further questions, please feel free to contact us.

Overview  This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data  Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h

Krones Lavatec Year of Make: 1999 Output: 24,000 bph. Retrofit: 2014

Used juice bottling line. LINE WITH A CAPACITY OF UP TO 12,000 BOTTLES/HOUR – production capacity for 330 ml bottles 1. Round bottle with a capacity of: - 250 ml – line capacity 9,000–12,000 bottles/hour – round bottle - 330 ml – line capacity 9,000–12,000 bottles/hour – round bottle - 750 ml - line capacity 5,000 bottles/hour - round bottle 2. Twist-off cap: - diameter 43 mm - diameter 38 mm 3. Label types: - cold glue (two-piece) Line configuration: 1. DNB-15 semi-automatic bottle depalletizer. 2. PBSz – 01 - 40 bottle rinser. 3. STORK VS 32 bottling monoblock. 4. AUTOMATIC TWIST-OFF CAPSULATOR with steam injection function, automatic, in-line capping machine (capsulator) model GG100. 5. KRONES BONOMATIC rotary labeler for cylindrical products. 6. VENUS APB-15 automatic bottle packing machine. 7. Videojet CIJ printer – model VJ 1620 8. LOB- ...

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l 

Klinger bottle washing machine also for swing-top bottles. Machine can be planned and set up by us. We can also supply additional conveyor technology

Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.

Krones bottle washer built in 2001 676-039 6000 bottles/h 0.2l-1.0l bottles Machine will be available in December 2026

Bottle washing machine MAG Type Sirio 8 with 10 bottles per row capacity: 3.000 – 11.000 bph Year of manufacturing: 1990 suitable for 0,2 ltr. – 1,0 ltr. bottles The machine is available from December 2026.

Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and  ...

A complete Groninger bottle filling line is available. 1) Bottle unscrambler Groninger ZSB 2000, year of manufacture: 1995. 2) Filling machine Groninger DFV 1000Q, year of manufacture: 2013, filling stations: 10, additional function: transverse transfer system, output: approx. 9000/h, dosing range: 5ml-1000ml, container height range: 30mm-250mm, transport cup dimensions X/Y: 108mm/80mm, operating hours: approx. 24100h. 3) Cap sorter Groninger ZSK 1500, year of manufacture: 1995, sorting disc speed: 25rpm. 4) Capping machine Groninger KVK 106, year of manufacture: 1995, max. capping output: 9000/min, max. container diameter: 100mm, max. container height: 200mm, machine dimensions X/Y/Z: approx. 3400mm/1450mm/2550mm, weight: approx. 1500kg. 5) Discharge conveyor Groninger, year of manufacture: 1995. Documentation available. An on-site inspection is possible.

Cleaning machine, Fabr. GM Gera, Type: Arcade, for 24,000 bph, control range 7,600 - 26,400 bph, 25 bph, cage pitch 95mm, chain pitch 140mm, with Siemens S7 control

Cleaning machine, Fabr. GM Gera, type: Arcade GEK2.1RV1, for 4,000 bph, 9 b/row, with 0.5 lt NRW bottle, cell pitch 95mm, with pre-soak, caustic bath 1+2, hot water bath 1+2, cold water and fresh water spraying, year 2007

Cleaning machine Fabr. Krones, Lavatec type: KES-2-2-212/22-80, built in 1999 for 0.33 lt Vichy, 0.35 lt. AFN bottle, 0.5 lt NRW and EURO bottle with Siemens Simatic Touch Panel

Cleaning machine, Fabr. PAC, type: CB 16-1 R-7,5 LII, for 6,000 bph, up to 1 lt. bottles, 16 b/row, year 1994, L: 7350mm x W: 2800mm x H: 2800mm Weight approx. 8 to, disassembled, for sale.

Cleaning machine, Fabr. PAC, for 3,000 bph, 6 bph, for bottles with Ø 90mm + height 262mm, with 2 lye baths, hot and cold water and fresh water bath, built in 1995, for sale.

Bottle transport trolley for 2 gas bottles, burner set

Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machin ...

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty cont ...

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)

Overview  This complete bottling line was last used for bottling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeler and a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and processes 700 ml and 1,000 ml bottles. Technical details  Output: 1,500 bottles/hour Formats included: 700 ml, 1,000 ml Last used for: Spirits Scope of delivery Feeding table Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 Conveyor belt (single-track) | Krones Labeler | Enos | T3 | 2017 Inkjet printer | Makroprint | X1 Jet | - Inkjet system | Linx | 5900 | -

Glass Bottle Filling Line 1000 bph With Isobaric CICE Careddu Filling Block This CICE Careddu GOLD DPS 6/6/1C is a compact rotary triblock bottling machine integrating 6 rinsing stations, 6 isobaric filling valves, and 1 crown capping head for hygienic packaging of beer in glass bottles. The system ensures controlled counterpressure filling to with air pre-evacuation with CO2 maintaining carbonation and minimizing oxidation during the bottling process. Filling block has Siemens S7 PLC control system. Filling bloc has CIP system for sterilizing equipment inside and outside with 85C hot water. The line contains also rotating infeed table where empty bottles are manually places, CICE Careddu Compatta labelling station for self-adhesive labels. It has a one roll fed label station and it is intended for the application of one label per product, typically used for front labelling, iden ...

Inspection machine for detecting damage and contamination in glass bottles, as well as for identifying foreign bottles., Nominal capacity of filler: 60000 b/h, Power: 10,7 kW, Water: max. 4 bar, consumption: 1,3 l/min, Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h, Length: approx. 2.995 mm, Width: approx. 2.370 mm, Height: approx. 2.600 mm, Weight: 5200 kg, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm, Machine partitioning: 94 mm, Operation / Control: Siemens S5, Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletiser with lifting frame, Capacity: 140 layer/h, Power: 8,75 kW, Voltage: 230/400 Volt, Frequency: 50 Hz, Compressed air: 5,0 bar; 8,0 Nm³/h, Length: 4020 mm, Width: 3400 mm, Height: 5425 mm, Weight: 3800 kg, Formats: europalett (1200 x 800 x 140 mm), Operation / Control: control box / Siemens S7, Material: Painted mild steel, Position: free standing ...

Single-end bottle washer. Factory overhauled in 2005., Additional title: one end machine, Nominal capacity: 6700 bo/h, Control range: 7370 bo/h, Number of bottle cells: 1620 pcs., Number of bottle cells per row: 10 pcs., Length: 7790 mm, Width: 3450 mm, Height: 2950 mm, Weight: 20000 kg, Machine partitioning: Chain division 150 mm, cell division 110 mm, Operation / Control: Siemens S 5, Material: Stainless steel, Position: Free-standing on spherical feet, Base construction: Housing in one-piece block design, Features: Bottle insertion and removal finger system, chemical dosing stations with dosing pumps, format parts for inlet and outlet

Bottle level control, Current: up to 1,5 kW/power supply, Voltage: 220/110 V, Frequency: 50/60 Hz, Length: 420 mm, Width: 350 mm, Height: 720 mm

Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head, Additional title: Years of manufacture: 1975 - 1990, Capacity: 9000 bottles/h, Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate, Features: De-capper; de-c ...

Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement), Crushing capacity: 6000 b/h, Current: 6,5 A, Voltage: 380 V, Frequency: 50 Hz, Length: 15220 mm, Width: 1300 mm, Height: 22600 mm, Weight: 700 kg, Base construction: on dome feet, Features: Fragment tub, noise protection box, slot for manual disposal of single bottles

This bottle crusher from HEIN Lärmschutztechnik GmbH efficiently crushes bottles by pressing and offers high crushing performance and significant volume reduction. Its compact and robust design ensures low wear, quiet operation (85/87 dB(Ai)), and splinter protection, making it ideal for busy production environments. The system has a manual capacity of 2,400 bottles per hour and operates at 380 V / 50 Hz, 6.5 A. It stands on ball feet and has a fragment container and a noise protection box, while its compact dimensions (1.45 m × 1.20 m × 1.85 m) mean it requires little space. The machine weighs 900 kg and offers stability and durability in daily operation. At a glance: Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement) Our team at VB ...

Krones Prontomatic labelling machine, type 12-6/6-4, For labelling crown-capped bottles in 0.5-litre and 0.33-litre sizes, as well as swing-top bottles in 0.5-litre and 0.58-litre sizes. Disposable crown-capped bottles in 0.33-litre sizes can also be labelled., Capacity: 13500 bph Swing-top label, Voltage: 400 V, Frequency: 50 Hz, Length: 2450 mm, Width: 2000 mm, Height: 2500 mm, Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l, Machine partitioning: 180mm, Running direction: Right - left, Operation / Control: Simatic S7-300

Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner., Additional title: PET bottle ejection system, Capacity: 4000 crates/h, Power: 2,8 kW, Current: 8 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, 1 m³/h, Length: 3000 mm, Width: 1910 mm, Height: 3830 mm, Weight: 2500 kg, Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l, Operation / Control: Simatic S7-300, Material: stainless steel, Position: free standing, Base construction: Stainless steel square tube construction on spherical feet, Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Conveyor belts for PET bottles, with 1-lane hinged belt chain and 6 lanes. Capacity: 24,000 bottles/hour, Additional title: Free bottle conveyors, Capacity: 24000 b/h, Free bottle transport approx.: 30 m, 90° bottle transport curves: 1 piece 1-chain conveyor, 180° bottle transport curve: 1 piece 6-chain conveyor, Formats: PET-bottles in 0,5 l, 1,0 l, 1,5 l, Operation / Control: controlbox / Siemens S7-300, Material: mainly stainless steel, Position: free-standing, Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switchgear, automatic belt lubrication

A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible.

Bottle washing machine O + H Contina type E44C / 302-110 year of manufacturing: 1995 capacity approx. 30.000 bph incl. Siemens S7 PLC control system incl. HMI touch panel incl. fully automatic bottle transport system incl. integrated safety systems and emergency stop incl. electrical control cabinet The machine is made of stainless steel and it is suitabble for returnable glass bottles. The machine is still in production until November 2026 in Germany.