bottle filling machines used for sale

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50290 € : 950.48 € : 610 mm : 600 mm : 610 x 305 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 1.100 mm/min : 1 - 12 mm : 370 mm : 1.5 kW : 0.004 kW : 0.19 kW : 7,4 kW : 2670 mm : 1810 mm : 2050 mm : 2100 kg : 355 x 50 x 127 mm : 1.450 U/min : 3,7 kW : 4 mm : 0,02 mm : 0,2 mm : 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator manual extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 € : 216.96 € : 5 kW : 265 kg : 10-114 mm : 2 : 3-22 m/s : (2x) 50 x 940 mm to grind and polish for round and oval tubes opening of sanding belts by footpedal machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 5434 : prompt, Zwischenverkauf v : China : 2200 € : 1 : 1580 € : 2.000 x 50 mm : 250 x 50 mm : 400 - 2800 1/min : 35 mm : 2.2 kW : 1160 mm : 700 mm : 1850 mm : 150 kg belt grinding- and polishing machine in one device continuous variable revs by frequency converter 2 clamping mandrels quick action clamping chuck incl. underframe users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : 162560 € : 3072.38 € : 1200 mm : 730 mm : 1200 x 600 mm : 1200 x 600 mm : 1300 mm : 5 - 30 m/min : 0-2250 mm/min : 0,001-32 mm : 685 mm : 560 mm : 0-675 mm/min : 500-2200 1/min : 11 kW : 5.5 kW : 3.1 kW : 3.1 kW : 4790 mm : 3207 mm : 2305 mm : 8100 kg : 1150 kg : 1600 kg : 405 x 75 x 127 mm : 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis &, alarm display Max. table speed (X axis) 30 m/min Integrated ma ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 119920 € : 2266.49 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 0 - 20 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 3160 mm : 2450 mm : 2080 mm : 3400 x 2200 x 2530 mm : 4000 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 3.9 kW : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 109520 € : 2069.93 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 4020 mm : 2450 mm : 2080 mm : 3400 x 2220 x 2530 mm : 3700 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 0,005 mm : 0,005 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 171210 € : 3235.87 € : 610 mm : 590 mm : 600 x 300 mm : 600 x 300 mm : 0 - 25 m/min : 0 - 4000 mm/min : 0,001 mm : 350 mm : 450 mm : 0 - 3800 mm/min : 0.001 mm : 600 - 3600 1/min : 11 kW : 3103 mm : 3933 mm : 2480 mm : 5800 kg : 810 mm : 314 kg : 420 kg : 405 x 50 x 127 mm : 2,4 / 3,9 kW : 3.9 kW : 0,005 mm : 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15", touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes wit ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11500 € : 220.8 € : 1 : 55 to : 500 mm : 40 x 10 mm : 37 1/min : 5 kW : 1550 mm : 1200 mm : 1950 mm : 1150 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48000 € : 916.8 € : 6 mm : 4 mm : 70 mm : 4000 mm : 550 mm : 8.75 kW : 4250 mm : 720 mm : 2000 mm : 2015 kg Easy operation with mobile control panel with push buttons Built according to EC Safety Directives and has CE Mark One set of flanging rolls included. Radius can be selected. One set of cutting blades included Min. cutting diameter: 600 mm (with adapter for small diameter 400 mm) Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm) Rotating speed 70 rpm with adjustable max. torque Top and bottom flanging rolls powered in rotation with planetary reducers Hydraulically adjustable bottom head for both, flat and crowned dish flanging Both cutting and flanging operation on the same head Users Manual Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diamet ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14700 € : 282.24 € : 1550 mm : 4 mm : 140 mm : 3,5 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 € : 481.32 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9740 : prompt, Zwischenverkauf v : Türkei : 6500 € : 125.45 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 17100 € : 328.32 € : 200 mm : 4 - 6 mm : 2 - 3 mm : 30 1/min : 30 - 140 ° : 4 kW : 900 mm : 1150 mm : 1240 mm : 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Max. thickness (420 N/mm²) : 6 mm (at 60°), 4 mm (at 140°) Max. thickness (600 N/mm²) : 3 mm (at 60°), 3 mm (at 140°) Automatic adjustment of blade gap 4 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to ",CE", regulations User manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4.5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 22 mm : 22 mm : 16 mm : 19 mm : 17 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 14 mm : 14 mm : 8.4 mm : 10 mm : 9 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 € : 620.37 € : 1550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened roll ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21400 € : 410.88 € : 5 mm : 2000 mm : 250 mm : 3000 mm : 750 mm : 1400 mm : 1350 kg Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system Throat depth: 1200 mm According to EC safety regulations Operating manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): 1 spare blade set Flanging attachment with 1 set rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21800 € : 418.56 € : 1270 mm : 5 mm : 5 mm : 4 mm : 5 mm : 4 mm : 4 mm : 3 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3020 mm : 1150 mm : 1110 mm : 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 20960 € : 402.43 € : 40 to : 250 mm : 200 x 20 mm : 1100 x 620 mm : 55 mm : 4,7 - 9,1 mm/s : 45 mm/s : 45 l : 3 kW : 950 mm : 1250 mm : 900 mm : 1000 mm : 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 € : 2107.35 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

drill diameter: 50 mm total power requirement: 2,2 kW weight of the machine ca.: 0,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 650 mm coil weight: 15 t material thickness: 16 mm The year of construction is estimated, the system is as good as new The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube: 6000 mm tube diameter: 42 x 3,0 mm wall strength: 3,0 mm bending radius min.: 150 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 7500 x 1.400 x 1.300 m Round steel tube: up to Ø 42 × 3.0 mm Round stainless steel tube: up to Ø 42 × 2.0 mm Square tube: 25 × 2.5 mm Max. section modulus: 4.1 cm³ Bending angle: up to 180° + 10° overbending Bending time at 90°: 2.7 sec. (forward stroke) Longitudinal feed speed: 450 mm / 1.5 sec. Rotary positioning speed at 90°: 1.0 sec. Repeatability of bending axis: ± 0.2° Controlled length tolerance: ± 0.3 mm Controlled rotation tolerance: ± 0.2° Tube loading length / usable length for mandrel bending: 4,100 mm Max. radius range: 150 mm Bending height: 850 mm Free-standing bending head: 850 mm long Bending axis drive: electro-hydraulic Rotation and length positioning: automatic via gear ...

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008

Schlebach Roll Forming Machine SPA Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Sheet width 300 - 880 mm Sheet thickness steel 0.7 mm Sheet thickness aluminium 0.8 mm Machine weight 500 kg Dimensions 1510 x 1475 x 1200 mm Total power requirement 400 V Colour blue/grey Profile height 25 mm Belt width up to 800 mm Inlet width up to 870 mm Roll forming speed 11 m/min Width adjustment 300 - 880 mm Machine number 95020141

Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009

Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006

Injection Molding Machine Ferromatik 110s-2F BJ 1999

Injection moulding machine Ferromatik K 125s/2f BJ 1995

Injection moulding machine Ferromatik K 200s /2F-493 BJ 1999

Milling machine Macmon 100E BJ 1990

Lathe Colchester Bantam VS 3500

used Schlebach roll forming machine, with hydraulic separation device in the outlet, Length measurement, unwinding device, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Sheet width 250 - 870 mm Sheet thickness steel 0.7 mm Sheet thickness aluminium 0.8 mm Sheet thickness stainless steel 0.5 mm Machine weight 420 kg Dimensions 1250 x 1470 x 1100 mm Total power requirement 400 V Color: Green Profile height 25 mm Belt width 290 - 880 mm Infeed width 290 - 880 mm Roll forming speed 11 m/min 50 Machine number 0392943

Manufacturer: RSA Model: Rasaplan NN-C Condition: Used Stock No: 9403 Maximum pipe diameter: 12-55 mm Square and rectangular tubes: 12x12-40x40/12x10-40x30 mm Workpiece length: 100-2000 mm Maximum pipe wall thickness: 4 mm

Vertical packaging machineAudion Elektro AVM 190I-2. Was in our company as a replacement machine. The machine is currently running on PE flat film 420mm wide.

Manufacturer: Z-Mat Model: F 1060 Condition: Used Stock number: 9404 Control system: FANUC Operating hours: 150 h Work table length: 1200 mm Work table width: 600 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Travel Z axis: 500 mm Number of all tools: 24 pieces Spindle: BT-40 Machine height: 2400 mm Machine length: 2700 mm Machine width: 2150 mm Machine weight: 6300 kg

Manufacturer: Krauss Maffei Model No.: PrecisionMolding 160-750 Year: 2022 Condition: Used Stock number: 9405 Clamping force: 160 t Screw diameter: 50 mm Injection capacity: 393 cm³ Distance between uprights (horizontal): 570 mm Distance between uprights (vertical): 520 mm

grinding diameter: 715 mm grinding length: 2000 mm centre height: 360 mm control: Siemens 840 D centre distance: 2000 mm max. workpiece weight between centers: 650 kg Grinding spindle:: Spindlespeed: 450 min/-1 driving power - grinding spindle: 7,5 kW taper: 1:5 tool taper: mm feed speeds: 0,01 - 15.000 mm/min travel -x axis: 500 mm travel -z axis: 2700 mm : 280 ° grinding speed: 15 m/min total power requirement: 75 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: 5 x 2,4 m External cylindrical grinding machine modernised in 2022 -- Siemens 840D / electrical system -- Ball screws on the X and Z axes replaced -- B axis repaired and encoder replaced. -- Hydrostatic system replaced. Equipped with: - Siemens 840D PowerLine CNC control (X, Z, C, B axes) - Marposs measuring system - BalaDyne system - Tailstock - Band filter system The data for this ad was created with Mo ...

Manufacturer: ARBURG Model: ALLROUNDER Centex 470 C 1500 - 400 Year: 2006 Condition: Used Stock number: 9406 Clamping force: 150 t Screw diameter: 40 mm Injection capacity: 201 cc Maximum distance between mounting plates: 750 mm Injection Molding Stroke: 500 mm Distance between uprights (horizontal): 470 mm Distance between uprights (vertical): 470 mm

grinding length: 600 mm grinding width: 300 mm workpiece height: 312 mm table-size: 600 x 300 mm max. workpiece weight: 320 kg dist. center of grinding spindle - table: 490 mm table travel longitudinal: 700 mm table travel cross: 340 mm table feed: 1 - 25 m/min turning speed range - grinding wheel: 1500 U/min power capacity - grinding motor: 2,2 kW grinding wheel size: 355 x 25 x 127 mm magnetic clamping plate: 610 x 305 mm dressing device: Kopfabrichter voltage: 400 V total power requirement: 3,0 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,90 x 1,90 x 1,90 m hydraulic power unit: 0,60 x 0,35 x 0,75 m coolant: 0,70 x 0,40 x 0,80 m - Serial-No.: EB 1507 - automatic vertical feed - dressing device - Band filter unit - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KRAUSS MAFFEI KM 175-1000 C2 injection moulding machine was manufactured in 2002 in Germany by Krauss-Maffei Kunststofftechnik München Germany. The machine is designed for the mass production of plastic components of various shapes, colours and applications. The components are produced using the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This process enables the production of precise and repeatable components of high quality. The KRAUSS MAFFEI KM 175-1000 C2 is equipped, among others, with a 55 mm diameter screw and a precision mould clamping system with a clamping force of 175 tonnes. Thanks to additional core pulls, the machine can work with more advanced moulds for the production of parts with complex geometries. Day-to-day operation of the machine is fa ...

Technical Parameters Category: Used butchering machines Subcategory Refrigeration Type Ice Machines Height 3000 mm Width 1300 mm Length 1800 mm Electrical Supply: 400V 50Hz 3N Main Material Stainless Steel, Acid Resistant Description Ice temperature about -9 C

BORCHE BS 150 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of plastic parts used in both everyday products and in many industrial sectors. These parts are manufactured using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. As a result, precise and repeatable parts of high quality are produced. The offered machine belongs to the Borche BS Plus series, designed for companies seeking lower operating costs whilst maintaining high production efficiency. Compared with the manufacturer’s standard models, it is equipped with an energy-saving servo drive and a more efficient pump. The BORCHE BS 150 Plus also features, among others, a 45 mm diameter screw and a precise mould  ...

BORCHE BS 120 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of technical components and everyday products made from plastics, in a variety of shapes and for various applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The offered machine represents the Borche BS Plus series, designed for companies seeking high efficiency with reduced operating costs. Compared with the manufacturer’s standard models, it features an energy-saving servo drive and a more efficient pump, enabling more economical operation. The BORCHE BS 120 Plus also stands out with its 40 mm diamete ...

ENGEL VC 80/25 TECH injection moulding machine was built in 2004 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components used both in everyday products and in many industrial sectors. These components are produced using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL VC 80/25 TECH is an excellent solution for both single-unit and series production. The machine is equipped, among others, with a 22 mm diameter screw and a precision mould clamping system with a clamping force of 25 tonnes. Day-to-day operation of the injection moulding machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of in ...

ENGEL ES 200/80 HL injection moulding machine was built in 1998 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components of various shapes, colours and applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The ENGEL ES 200/80 HL features, among others, a 22 mm diameter screw and a precision mould clamping system with a clamping force of 80 tonnes. All injection moulding parameters are programmed via the intuitive ENGEL CC100 control system, which simplifies day-to-day operation of the machine. The injection moulding machine can also be equipped with production automation systems to increase the efficiency of the e ...