bottle filling machines used for sale

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Down 7.5kw 7.5kw rights Left Mount 7.5kw 11kw pit Universal 5.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pull roller clamps Electric pressure beam adjustment Input table length 1970mm Table top lubrication system Year of manufacture 1999 Machine dimensions 420x180x189cmH Machine Weight: 3200kg

Chopper Untha – Four-Wave Hacker Type: RS 30-4-S Year of manufacture: 8/2007 CE 4 waves of hackers 2 motors of 11 kW each Perforated mesh diameter 20 mm Cutterbar opening 450 x 560 mm Filling opening L1000 mm x W 1280 mm Hopper height 1040 mm Main shaft speed approx. 23 rpm. Speed secondary shaft approx. 34 rpm. Operating hours 2681 h Workplace-related sound pressure level approx. 84 dB (A) Sound power level approx. 97 dB (A) The material to be shredded is pulled in by the cutting unit and pre- and post-shredded in a single operation by the main and secondary cutting unit. Dimensions: L 1340 mm x W 1090 mm x H 1920 mm Weight: 1240 mm

Key data: 2700 kN, 29 g/PS

We offer this DESMA D 969.250 Z (S3) rubber processing machine in mint condition, built in 2021. Clamping force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive capacity: 72/39 l/min Pump drive current consumption: 32.0 A Pump drive power: 22 kW Nozzle application force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Hydraulic motor hours: 730 hours, Hydraulic pump (clamping force): 65 Hours, Operating System: active 3,360 hours Ideal for the production of: - Technical moulded rubber parts - Seals and O-rings - Automotive and industrial components Condition & Avai ...

Model MX5115 Table size 640 × 580 mm Table tilt 0-45° Vertical table stroke 100-120 mm Maximum working thickness 50-120 mm Engine power 2.2 kW / 3.0 kW Power supply 220 V / 380 V, 50Hz Spindle speed 15,000/18,000 rpm Tool shank diameter 6.35 mm - 12.7 mm Transport dimensions 780 × 710 × 900 mm Weight 150/180 kg Price 760 Eur (EXW Jonava, Lithuania)

Table size: 400 x 800 mm Table travel x/y/z: 600/400/400 mm Swivelling vertical milling head, spindle mount: SK 50 Quill stroke: 100 mm Speed range: 63 - 3150 rpm Feed speed x and y/z: 16 - 800 mm/min/8 - 400 mm /min Rapid traverse x and y/z: 2000/1000 mm/min electr. Connection: 380 V, 5.3 kW Space requirement: 2200 x 2150 x 1910 mm Weight: 2200 kg

Ulma VTI 640 Technical Specifications Model: VTI 640 Condition: Mint (fully functional) Year of Make: 2025 Capacity: Up to 20 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for laminated film ✅ Machine prepared for MAP ✅ Format tube for bag width 300mm ❌ Label dispenser ✅Videojet 6330 Printer ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Automatic foil centering ✅ Quick-change system for film with vacuum gluing table and knife ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt increasing ✅ Volume pneumatic filler with tank 200 – 300 litres Documentation & Operation Language (documentation & HMI): German (other languages on request)  ...

Year: 2003 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - variable milling angles - turret stop for milling depth adjustment - cooling system - quick cutter change system

Heckler & Koch horizontal milling machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Manufacturer: DOOSAN Model: PUMA 2600 Year: 2012 Condition: Used Stock number: 9439 Control system: FANUC Maximum turning length: 1245 mm Max. turning diameter: 376 mm Maximum spindle speed: 2800 1/min Weight: 5400 kg

Horizontal milling machine Steinel SH1 Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

2x double spindle milling machine Walther Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Horizontal milling machine Steinel Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Hermle horizontal milling machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Labeler MECTEC, Type: PCU IV-ACC-B4 -in very good condition- - Top Label Applicator - With integrated hot stamping printer - Control unit: MECTEC PCU IV (Printer Control Unit) - Integrated ACC board (External Connection Board for PLC/system connection) - Siemens Simatic control panels - Incl. FESTO sealing unit - Max. label height: 120 mm - Conveyor belt width: 300 mm with CH system - Dimensions: approx. 1,700 mm x 1,850 mm x 1,900 mm (L x W x H) - Condition: Very good, hardly used, ready for immediate use Visits and test runs are possible by arrangement.

Deckel Maho 4-axis CNC milling machine DMC 64 V linear Working Range: - X-axis: 640 mm - Y-axis: 600 mm - Z-axis: 500 mm - With 520 Heidenhain control - With coolant system + paper filter - Probe preparation, but probe is missing - Few operating hours - Machine is first owned - from the production of individual parts of precision parts - All 4 axes can be moved, only the transmitter of the main spindle is defective Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or ...

turning diameter: 310 mm turning length: 450 mm control: Fanuc O-TC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Fanuc O-TC 12-fold revolver (VDI30) 3-jaw chuck main spindle 3-jaw chuck sub spindle chip conveyor tool measuring device coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 500 mm Umlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mm max. Drehdurchmesser / max. turning diameter 310 mm max. Drehlänge / max. turning lenght 450 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 450 mm Drehzahl / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Stangendurchlass Hauptspindel / bar diameter main spindle 50 mm Eilgang X / rapid feed X 24 m/min Eilgang Z / rapid feed Z 30 m/min. Antriebsleistung Hauptspindel / d ...

max. wheel diameter: 180 mm gear width: ca. 220 mm max. module: 3 / 5 mm Control: Siemens 840D sl max. radial velocity: 5000 mm/min max. workpiece diameter: 180 mm table rotation speed: 800 U/min table diameter: 145 mm axial travel: 250 mm mm back rest:: axial travel: 300 mm clamping force max.: 13 kN milling head:: swivelable +/-: 45 ° drive capacity: 23 kW turning speeds: 6000 U/min diameter of tools max.: 90 mm tool clamping length max.: 211 mm module hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/min weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1020 mm, 1 mm

in good condition, wire inserts, rebate groove Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.0 mm Farbe/Colour grün Weight/Weight 250 kg Dimensions 1700 x 500 x 1160 mm Number of round rollers 3 pieces Roller diameter 65 mm

Key data: 1030 mm

with wire inserts, conical rounds, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1030 mm Sheet thickness max. steel 0.6 mm Farbe/Colour grün Weight/Weight 220 kg Dimensions 1290 x 600 x 1050 mm Lower roller diameter 40 mm Top roller diameter 40 mm Number of round rollers 3 pieces Machine number 169

Key data: 2020 mm, 1 mm

used Teko manual bending machine Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2020 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.70 mm Colour: green Dimensions: 630 x 660 x 1155 mm Machine weight: 220 kg Upper beam stroke: 140 mm without roller scissors Bending angle (max.): 120 degrees Machine number: 163/141

- TouchScreen - Air table - Side table with air right / left - RA2 jogger with air and smooth out roller - Baumann Lift - spare knife

- Color display - Program - Air table - Resopal side table left+right - Jogging table with air - Spare knife

Table 600 x 300 mm Travel distances X / Y / Z: 400 / 300 / 350 mm Spindle holder SK 40 Spindle speeds: 50 - 2500 rpm Drive power 2.2 kW Accessories: Vise, dividing head, rotatable vertical milling head, Weight 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Instruction manual in German

STUDER S 20 FAVORIT ist eine Rundschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Spitzenhöhe 100 mm, Spitzenweite 400 mm, Längsweg 420 mm; Scheibe Ø350×50 mm (Bohrung127), Breite 30 mm; Werkstück 20 kg. Techn.: Umfang 30 m/s; Spindel 30–1200 t/min st.; Tisch 100–3500 mm/min st.; Motoren 3 kW/0,5 kW; 3×380 V; 10 kVA; Gewicht ~1600 kg; Abm.2350×1480×1400 mm. Zubehör: Reitstock, Innen-Schleifeinrichtung, Abrichtgerät, 3-Backenfutter Ø100/160, 2×CBN, Spannzangen W20. Erreicht enge Toleranzen; Einsatz: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhren. Technische Daten ohne Gewähr

Key data: 1020 mm, 1 mm

used RAS 3-roll round bending machine, with wire inserts, seam groove, transmission gear, Adjustment of the rear roller from the front with scale, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.25 mm Farbe/Colour grün Weight/Weight 150 kg Dimensions 1300 x 600 x 1100 mm Number of round rollers 3 pieces Roller diameter 56 mm Machine number: 316/10

Wilco WILCOMAT W07 MC/LFC semi-automatic laboratory testing device for leak testing (CCIT) of parenterals, 1 test station, detection limit 10 microns, measurement principle based on the LFC test method (leak testing using the differential pressure method – non-destructive testing method for 100 per cent inspection), including format parts (test chambers) for 20 ml and 100 ml vials, B&R CP0291 PLC control, 12-inch touchscreen, Sogevac SV 25 B electric vacuum pump, Brother printer, electrical connection 230 V/50 Hz, power requirement 2.9 kVA/13 A, compressed air 5–10 bar, machine dimensions approx. 800 x 600 mm (L x W), machine height approx. 1,690 mm, machine net weight approx. 400 kg

HAAS Schleifmaschinen MULTIGRIND CA ist eine CNC Werkzeugschleifmaschine mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Sie verfügt über 5 Achsen: X 630 mm, Y 345 mm, Z 430 mm; Schleiflänge 500 mm; Schleifdurchmesser 260 mm; max. Schleifscheibendurchmesser 250 mm; C-Achse (Spindel) Auflösung 0,001°; Schwenkwinkel -225° bis +70°; Auflösung 0,0001 mm. Anschluss 50 Hz, 3x 400 V; Maschinengewicht ca. 8500 kg; Abmessungen L 2650 x B 2400 x H 3200 mm. Ausgestattet mit Lade- und Entlade-Roboter sowie Feuerlöschanlage. Entwickelt für enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Seven Pfaff industrial sewing machines are available. 1) 2 × Pfaff 1183 industrial sewing machines, one with drive and one without drive, stitch type: lockstitch 301, needle system: DBx1/134R, needle size: 60Nm-90Nm, max. stitch length: 4.5mm, max. sewing speed: 5500stitches/min, needle bar stroke: 32mm/36mm, presser foot clearance: 9mm-13mm, working space X/Y: 260mm/125mm, sewing head dimensions X/Y/Z: approx. 550mm/180mm/300mm, sewing head weight: approx. 30kg. 2) Pfaff 563 industrial sewing machine with drive, stitch type: lockstitch 301, max. sewing speed: 5500stitches/min, max. stitch length: 3.5mm/4.5mm, needle system: 134, needle size: 60Nm-100Nm, needle bar stroke: 33mm, balance wheel diameter: 65mm. 3) Pfaff 134 industrial sewing machine without drive, single-needle flatbed version with horizontal rotary hook, needle system: 134, working space X/Y: 295mm/140mm, max. sewing spee ...

x-travel: 10000 mm y-travel: 1500 mm z-travel: 3000 mm Control: Heidenhain TNC 430 tool taper: ISO BT 50 spindle turning speed - stepless: 10 - 3000 U/min feed range: 10000 mm/min rapid traverse: 15 m/min main drive motor: 37 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyor Optional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm - Table load 30 to - Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 180 mm table diameter: 145 mm max. module: 3-5 mm gear width: 250 mm table turning speeds: 800 U/min milling head vertical adjustable: 400 mm Milling axis swiveling range: + / - 45 ° max. milling cutter diameter: 90 mm hob turning speeds: 0 - 6000 U/min cutter length max.: 211 mm control: Siemens 840 D total power requirement: 23 kW weight of the machine ca.: ca. 10 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m The LC series is a machine system for the machining of spur and helical gears and cylindrical gear shafts and helical gears and cylindrical gear shafts, which is characterised by its special performance and versatility. Compared to other gear manufacturing processes, gear hobbing is characterised by its characterised by its high consistency of machining results over the entire tool life. Technical data of the machine: Basic specifications: --> Machining ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15441 € : 296.47 € : 40 mm : MK 4 : 300 mm : 1,5 / 3,0 kW : M30 : 610 mm : 850 mm : 1920 mm : 440 kg : 0 - 300 mm/U : 160 mm : 125 mm : 150 - 700 mm : 590 x 450 mm Display with the following functions: - Selection of operating mode: manual drilling / drilling with feed / tapping - Spindle speed - Feed rate - Zero point setting - Drilling depth - Piece counter - Chip breaking mode - Jump switch mode (for efficient drilling of square tubes) - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode Drilling capacity / normal drilling performance 35/40 (in E335/ST60) Automatic feed Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protecti ...

Centering machine for preparing axes to be machined on lathes such as Schaublin, Emco etc. The centering is automatic according to the diameter of the parts. Satisfactory condition, belt to be changed. Three-phase motor.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 € : 15 mm : B 16 : 214 mm : 40 - 4000 U/min : 0,54 kW : M10 : 355 mm : 485 mm : 1027 mm : 70 kg : 125 - 490 mm : 300 x 250 mm : 82 mm THE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLS PLUS - CONTROL PANEL - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60) Manal feed Tapping device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Head height adjustment via toothed rack LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton The ...

PET strapping green, smooth, 11 x 0.52 mm, 3,350 m/roll, roll diameter: 406/600 mm, tear force: 222 daN Remaining stock of 22 rolls on pallet available, original packaging, original Signode Tenax 1716

Pausch Compact CS 2000 with the following system components: Generator Editor Hfe 501_Baujahr 2010 Tube Siemens RAY-14S_1_Baujahr 2018 Vertical Tripod BS 66 Condition: used • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items ...

Vision Wide VF4000 portal milling machine for sale. 2-axis milling head (1 degree C-axis and 1 degree B-axis) with position determination Encoder SK50 VTEC VF4000 Dimensions X-axis 4200 Y-axis 2300 Z-Axis 1020 Tool magazine 40WZ Control Siemens 840D SL

3-spindle copy milling machine with stops for aluminium and plastic profiles Maximum spindle speed: 12,000 rpm Stop arms right and left Good condition

AB25V: Designation: Arburg 275 V 250-70 Year of Make: 2007 Clamping force: 250kN Screw diameter: 18mm Tiebar spacing: 275 x 275 FROM 50V: Designation: Arburg 375 V 500-100 Year of Make: 2008 Clamping force: 500kN Screw diameter: 15mm Tiebar spacing: 375 x 375

GBK-420Automatic bread packing machine for whole loaves of bread

Key data: 1160 mm

Powerful vertical CNC lathe from HYUNDAI WIA Year of construction 2013 FANUC 32i Manual Guide Max. turning diameter 1,160 mm Max. swing diameter 1,355 mm Main spindle power up to 60 kW Max. torque 6,490 Nm C-axis with 0.001° resolution 12-speed BMT85P tool turret 12 powered tool stations Renishaw Q-Setter Hyundai WIA Tool Breakage Monitoring 20-bar coolant system Hinged belt chip conveyor 800 mm 3-jaw chuck Seoam CAS 32

Key data: 380 mm, 1019 mm

X-axis 234 mm Y-axis 100 mm Z-axis 1090 mm Tailstock 1075 mm C-axis 360° Drive power 26 kW Max. bar passage 80 mm Max. speed 4000 rpm Number of tool positions 12 Drive power milling drive 5.5 kW Max. spindle speed 5000 rpm Powered tool stations 12

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Good condition Weight: 400 kg

Key data: 380 mm, 1000 mm

Main spindle Drive power 26 kW Max. spindle speed 4000 rpm Max. bar passage 77 mm Spindle nose A2-8 Revovler Drive power milling drive 5.5 kW Max. speed driven tools 4500 rpm Tool stations 12 Mazatrol Matrix Control Main spindle with full C-axis Tooleye Tool Measurement Chip Conveyor, Right Discharge Coolant pump 15 bar Interface for bar feeder Parts catcher Tailstock 3-jaw chuck B-210 Tool holder package: 7 fixed + 3 driven tool holders CE mark Documentation

Key data: 1640 mm, 3 mm

Max. bending length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via switches Manual backgauge with spring fingers Weight: approx. 1600 kg

Hartmann Automatic Slicer SL-25 - working condition very good,

Mitutoyo Length Measurement Mod. KA 12 (for longitudinal and transverse movement) Retrofitting with a CNC control system for the puller, including the air conditioning unit, Tip width: 630 mm, the machine has no tailstock and was specially used for forage work, max. grinding diameter: 280 mm, max. grinding wheel size: 400 x 40 x 127 mm, (none included), Speed of grinding spindle 2040 min-1, 6 speed levels of the tool spindle: 22.4 to 280 min-1, Drive motor 4 kW, Accuracy / Smallest part value: 0.001 mm, Taper in Riding and Tool Spindle Morse 4 Largest table length movement: 760 mm, Mass between tips 120 kg, Total power: approx. 9.3 kW, Machine weight: approx. 2600 kg, Machine Dimensions: L 3075 x W 1650 x H 1500 mm Year of manufacture: correspond to production no.: 1989 - 1991 Swivelling headstock (± 90°) and grinding head (± 45°), Hydraulic table movement and autom ...

: 0.4-5 mm Workingpiece thickness from to: 10-50 mm Total length: 2730 mm Feed speed: m/min. total power requirement: kw Weight: 720 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-5 mm Workingpiece thickness from to: 6-45 mm Total length: 4130 mm Feed speed: 11 m/min. total power requirement: kw Weight: 1250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mm turning speeds: 1000 - 6100 U/min bore slide stroke: 850 mm bore depth: 550 mm spindle distance: 240 mm dimensions: ca. 6 5 2,3 m Shipping weight: ca. 6000 kg Packing: ca. 10 Lademeter m : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 420 mm gear width: 120 mm max. module: 7 mm min. module: 0,5 gear hobbing diameter - external: 420 mm gear hobbing diameter - internal: 370 mm table diameter: 400 mm boring diameter: 125 mm spindle stroke: 120 mm stroke position adjustment: 230 mm strokes - infinitely variable: 30 / 800 Hub/min depth feed stepless: 0,016 - 0,063 mm/Hub total power requirement: 35 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.