bottle filling machines used for sale

max. wheel diameter: 600 mm gear width: 500 mm max. module: 15 min. module: 1 total power requirement: 2 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles av ...

max. workpiece diameter: 100 mm min. workpiece diameter: 10 mm workpiece length: 1000 mm total power requirement: 16 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 0 m The guides have been outdated 10 years ago The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Junker Cylindrical Grinding Machine Type EJ 10 Year of manufacture 2005 Control Siemens Center width 150mm Axis height of the centering point 100mm Workpiece mass max. 5kg Grinding wheel diameter max. 400mm Grinding wheel width max. 63mm Bore of the grinding wheel JUNKER spindle collar 27mm The offer is aimed exclusively at tradespeople within the meaning of §14 BGB

For sale is a Kurtz automatic molding machine of the type A-Line, built in 2010, The machine is equipped with a tool for EPS plates and a manipulator. The condition is very good and can be visited under power by prior appointment.

For sale is a molding machine, manufacturer Erlenbach, type EHV-C 120/670.The machine is in good condition and can be viewed under power by appointment

MAHO MH 800 P - Tool Milling Machine - Recording: ISO40 - X/Y/Z: 700 / 450 / 500 mm - Occasionally problems with the measuring system due to contamination - Occasional failures during rapid traverse - in this case the machine must be switched off and on - Year of construction 1980 Technical data Main Gear: - Sliding gear geometrically stepped: 1.25 - Number of gears: 18 Horizontal & vertical milling spindle: - Speed range: 40 - 2000 rpm - Tool holder: ISO 40 - Tool clamping: hydromechanical - Quill stroke vertical/horizontal: 100 mm Quill feed gear (vertical): - Autom. Quill feeds: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Workspace (manual & automatic): - Longitudinal adjustment (X-axis): 700 mm - Vertical adjustment (Y-axis): 450 mm - Headstock (Z-axis): 500 mm Feeds: - Infinitely variable in X/Z: 10 - 500 mm/min - Infinitely variable in Y: 5 - 250 mm/m ...

Manufacturer: EMAG Model: VSC 250 Year: 2003 Condition: Used Stock number: 9420 Control system: SIEMENS Max. workpiece diameter: 250 mm Max. length of the workpiece: 175 mm Lathe chuck diameter: 315 mm Weight: 6500 kg

BOEHRINGER / VDF NV 250 T is a CNC Vertikaldrehmaschine, ausgelegt für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Achsen gesamt 4; Spindelbohrung 65 mm; Verfahrwege Z 260 mm, X 760 mm, Y ±50 mm; Eilgang X 120 m/min, Z 40 m/min; Revolver 12 Positionen VDI 40/DIN 69880. Spindelkopf A6; stufenlos bis 4500 t/min; Spindelleistung 31 kW; Anschluss 50 Hz 3x 400 V; Gewicht ca. 8500 kg. Zubehör: 3-Backenfutter Ø250 mm mit automatischem Zentrieren, Lampe, Kühlmitteleinrichtung, Ölnebelabsaugung, automatische Be-/Entladeeinrichtung. Erreicht enge Toleranzen; typisch für Automotive, Luftfahrt, Medizintechnik, Maschinenbau Technische Daten ohne Gewähr

Manufacturer: SPINNER Model No.: PD-CNC Year: 2006 Condition: Used Stock number: 9421 Control system: SIEMENS Sinumerik Maximum turning diameter: 120 mm Maximum length of travel in the X-axis: 400 mm Maximum feed rate in the Z-axis: 400 mm Max. rod diameter: 32 mm Spindle speed: 8000 1/min Length: 2300 mm Width: 1200 mm Height: 1700 mm Weight: 2300 kg

Monzesi Rossi Monza 400 centerless grinding Grinding wheel 200 400, Special price, The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap., Grinding wheel width: 200

Manufacturer: INDEX Model: G 200 C Year: 2001 Condition: Used Stock number: 9423 Control system: SIEMENS Maximum spindle speed: 7500 1/min Maximum length of travel in the X-axis: 155 mm Maximum length of travel in the Y-axis: 120 mm Maximum feed in the Z-axis: 590 mm Length: 1910 mm Width: 3580 mm Height: 2050 mm Weight: 4000 kg

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Electric retrofit with inverter (regulating wheel) The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding ...

Two Juki button sewing machines and one Herbert Meyer fusing machine are available. 1) 2x Juki MB-373 button sewing machines, stitch type: single-thread chainstitch, max. sewing speed: 1500stitches/min, number of stitches: 8/16/32, crosswise feed: 2.5mm-6.5mm, lengthwise feed: 0mm/2.5mm-6.5mm, button size range: 10mm-28mm, needle bar stroke: 48.6mm. 2) Herbert Meyer RPS-L 600 fusing machine, year of manufacture: 1999, fusing width: 600mm, max. belt speed range: 9m/min, max. pressing pressure: 3.5bar. Oil level and needles should be checked. On-site inspection is possible.

grinding diameter: 360 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 500 x203,2 x 50-100 mm total power requirement: 12 KvA weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,3 x2,0 x 1,8 m - Includes belt filters - Includes grinding wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 910 mm Number of sanding units: 1 st. Workpiece thickness max.: 3 - 160 mm sanding belt measurements: 2.200 x 1.010 mm Feed motor: 0,55/0,75 kW Feed speed: 4,5 / 9 m/min. Weight: 1.210 kg : 18,5 m/sec output: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 /8 mm Workingpiece thickness from to: 10 - 60 mm Feed speed: 8 / 12 m/min. : Ja Flush/radius/chamfer milling units: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 / 10 mm Workingpiece thickness from to: 10 - 60 mm Total length: ca. 5.100 mm mm Feed speed: 18 m/min. total power requirement: 13 kw Weight: ca. 2.000 kg Premilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Spraying device: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 mm Workingpiece thickness from to: 8-45 mm Feed speed: 9 m/min. total power requirement: 14,5 kw workpiece length - min.: 140 mm Premilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : ca. 75.400 : ca. 59.300 m length in total: ca. 4.700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Labeler Manufacturer: PAGO Type System 214 Suitable for self-adhesive labels Carton labellers (folding cartons) Output max. 300 pieces/min. Operating instructions available

Labeler Manufacturer: PAGO Type System 580 Suitable for self-adhesive labels Carton labellers (folding cartons), 3-sided labellers Output 75- max. 200 pieces/min. Operating instructions available

Ulma FM 300 C X (WASH DOWN VERSION) The ULMA FM 300 C X was developed to package fresh food with barrier film (BDF) in a modified atmosphere (MAP). This machine produces hermetically sealed "pillow packs" that are then shrunk in the hot air tunnel. Technical Specifications Model: FM 300 C X Condition: New Year of Make: 2025 Capacity: Up to 70 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Barrier Shrink Tubular Bag Machine equipment Length of infeed belt: Free insertion distance 2490 mm Features ✅ Machine in wash down version ✅ Motorized film roll holder (max. film width 900mm) ✅ Foil Limit Switches ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Machine suitable for barrier shrink film and laminated film ✅ Cross-sealing bar with double tooth for mono films ✅ Independent eje ...

Labeler Manufacturer: NERI Type BL 400 VTEXL Series No. N 3110017 Labeller for boxes max. 400 pieces/min. Box dimensions length 20-180 mm x height 15-120 mm x width 70-200 mm 2 Sides Labeling Tamper Evident Labels Horizontal 1 vertical labeller for vignettes Label roll min. 40 mm max. 400 mm. Serialization make Systech (product tracking) Printer make Wolke M 600 Incorrect cardboard ejection

Labeler Manufacturer: NERI Type BL 400 VTEXL Series No. N 3110018 Labeller for boxes max. 400 pieces/min. Box dimensions length 20-180 mm x height 15-120 mm x width 70-200 mm 2 Sides Labeling Tamper Evident Labels Horizontal 1 vertical labeller for vignettes Label roll min. 40 mm max. 400 mm. Serialization Make Mettler Toledo YOC 2019 Printer make Wolke M 610 Incorrect cardboard ejection Documents available

Labeler Manufacturer: NERI Type BL 400 VTE Serial No. M.BAA 137.01 Labeller for boxes max. 400 pieces/min. Box dimensions length 20-180 mm x height 15-120 mm x width 70-200 mm 2 Sides Labeling Tamper Evident Labels Horizontal Label roll min. 40 mm max. 400 mm. Incorrect cardboard ejection Documents available

Ulma TFS 200 S This packaging machine uses two rolls of film to produce skin packaging automatically. Workflow: • Heating of the bottom film (inside the forming station) • Shapes of the pack • Placing the product in the package • Heating the skin top film (for skin application) • Performing skin vacuum and package sealing • Cutting the package crosswise and longitudinally • Package application • Residual film winding Technical Specifications Model: TFS 200 S Condition: Exhibition machine (fully functional) Year of Make: 2025 Capacity: Up to 18 packs/minute Packaging Type: Skin Packaging Machine equipment Free insertion distance 760 mm Features ✅ Format 420 x 230mm 3.1 ✅ Maximum product height 55mm (25mm overhang) ✅ Adapter for foil mandrels to 6" ❌ Label dispenser ❌ Printers ✅ Busch vacuum pump 160 m3/h integrated ❌ Do ...

Labeler Manufacturer: NERI Type BL 400 VTE Serial No. M.BAA 138.01 Labeller for boxes max. 400 pieces/min. Box dimensions length 20-180 mm x height 15-120 mm x width 70-200 mm 2 Sides Labeling Tamper Evident Labels Horizontal Label roll min. 40 mm max. 400 mm. Serialization make Systech (product tracking) Printer make Wolke (XMV Garvens Wolke Druckstation) Incorrect cardboard ejection Documents available

Ulma TSA 680 S Automatic machine for closing pre-formed trays of different materials (polypropylene, polyethylene, PVC, polystyrene, PET, CPET, etc.) using thermally sealable films. These are compatible with the trays and produce packaging with or without a protective atmosphere – depending on the customer's requirements. Technical Specifications Model: TSA 680 S Condition: Exhibition Machine Year of Make: 2025 Capacity: Up to 54 packs/minute (depending on film and product properties) with MAP. Packaging type: Tray sealer Machine equipment Length of infeed belt: Free insertion distance 3000 mm Features ✅ 3 meter belt feeder ✅ RFID Access Cards ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ MAP Cut Inside Tool for Trays 227 x 175 or 190 x 144 ❌ Double film roll holder ✅ Vacuum / Gas System (O2 >21% possible) ✅ Vacuum pump Busch  ...

SALE ONLY WITHIN GERMANY AND AUSTRIA The ULMA FM 300 automatic flow wrapper has been specially developed to package fresh products with multi-layer films in a modified atmosphere (MAP). This machine produces hermetically sealed pillow-pack tubular bags in pillow format. Ulma FM 30 The ULMA FM 300 automatic flow wrapper has been specially developed to package fresh products with multi-layer films in a modified atmosphere (MAP). This machine produces hermetically sealed pillow-pack tubular bags in pillow format. Technical Specifications Model: FM 300 Condition: Refurbished 2026 (fully functional) Year of Make: 2020 Capacity: Up to 80 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 2135 mm Features ✅ Wash Down Feed Belt in Hygiene Design ✅ Motorized fi ...

Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfe ...

Kammeröfen Herdwagenöfen Gasbeheizte Ofenanlagen Schutzgashärten, Semi-Vakuumhärten, Aufkohlen Salzbadöfen Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen Herdwagenöfen Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermisches Reinigen Vakuumtechnik Pyrolyse Löten Öfen INDUSTRIEOFENBAU Kammeröfen Rollenherd Hubbalken Drehherd Stoß Hubherd und Herdwagenöfen in allen Beheizungsarten sowie sämtliche V ergüteanlagen in allen Beheizungsarten. Kammeröfen Herdwagenöfen Herd wagenöfen Glühen, Anlassen, Entspannen Afkohlen, Nitrieren Auslagern Härten Abschrecken Schmie ...

3 Erka kneading machines with 6 tank cars are offered on order. The machines are located in the Frankfurt area.

Type 9C3, 380-440 V, 50/60 Hz, 13 A 4000 - 5400 W, 600 l/min air, 2mbar Remaining stock 2 pieces

Max. bending capacity: 220 kN (22t) Tool height: 120 mm Weight: approx. 500 kg

B&A REF: 9343 TON: 110 SCREW DIAMETER: 35MM SHOT WEIGHT: 162 STROKE VOLUME: 178CM3 INJECTION PRESSURE: 1955AR PLATEN SIZES: 770 X 730MM DBTB: 480 X 440 MM MIN MOULD HEIGHT: 80MM MAX MOULD HEIGHT: 350MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 850MM EJECTOR STROKE: 125MM CONTROLS: TACTUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 15 SERVO HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE MOTOR: HYDRAULIC

B&A REF: 9341 TON: 550 SCREW DIAMETER: 90MM SHOT WEIGHT: 2365 STROKE VOLUME: 2600CM3 INJECTION PRESSURE: 1630AR PLATEN SIZES: 1310 X 1260MM DBTB: 900 X 800MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 300MM CONTROLS: COLUMBIA CORE PULLING: 2 AIR VALVES: 2 MOTOR: 55 HEATING CAPACITY: 34KW ROBOT: STYRAMA SERVO SCREW DRIVE: HYDRAULIC

B&A REF: 9340 TON: 130 SCREW DIAMETER: 40MM SHOT WEIGHT: 2015 STROKE VOLUME: 232CM3 INJECTION PRESSURE: 1710AR PLATEN SIZES: 620 X 665MM DBTB: 410 X 460MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 420MM MAX DAYLIGHT: 920MM EJECTOR STROKE: 150MM CONTROLS: COLUMBIA CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9KW ROBOT INTERFACE: EUROMAP 67 ROBOT: WITTMANN BRIMUS 16 SCREW DRIVE: HYDRAULIC

B&A REF: WITTMANN BATTENFELD SmartPower TON: 300 SCREW DIAMETER: 65MM SHOT WEIGHT: 991 STROKE VOLUME: 1078CM3 INJECTION PRESSURE: 2070AR PLATEN SIZES: 1130 X 1155MM DBTB: 800 X 720MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 850MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 300MM CONTROLS: UNILOG B8 CORE PULLING: 2 AIR VALVES: 6 MOTOR: SERVO HYDRAULIC HEATING CAPACITY: 24.5KW ROBOT: WITTMANN WX 152 SERVO SCREW DRIVE: HYDRAULIC HOT RUNNER: 8 ZONE

B&A REF: 9330 TON: 1600 SCREW DIAMETER: 175MM SHOT WEIGHT: 16042 STROKE VOLUME: 17438CM3 INJECTION PRESSURE: 1843AR PLATEN SIZES: 2250 X 2100MM DBTB: 1850 X 1400MM MIN MOULD HEIGHT: 700MM MAX MOULD HEIGHT: 1600MM MOULD OPENING STROKE: 2700MM MAX DAYLIGHT: 3400MM EJECTOR STROKE: 350MM CONTROLS: MC5 CORE PULLING: 4 AIR VALVES: 2 MOTOR: 200 HEATING CAPACITY: 191KW ROBOT: KRAUSS BEAM SERVO SCREW DRIVE: ELECTRIC

Automatic intermittent-motion stretch-banding machine for grouping and banding folding cartons with linear infeed. Machine incl. grouping unit. Output up to 40 cycles/min.

Manufacturer and model: iDEAL BAS 050-11 Rated power (ED 50%): 4.5 kVA Secondary voltage: 2.6 – 4.4 V (6 stages) Clamping force: 10 kN (hydraulic) Maximum compression force: 2.2 kN Iisc Hq E Rrszqdkxjvef Machine weight: approx. 180 kg Hydraulic tensioning, operated via foot switch Pyrometer (GTR): yes (temperature display on the touch panel) Connection voltage: 380 – 419 V Bi-metal/carbide saw blades: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Blade dimensions: 6×0.4 – 30×0.6 mm Blade steel S235JR: max. cross-section 75 mm² Blade steel X5CrNi18-10: max. cross-section 40 mm² Pyrometer / GTR: The integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. The target temperature is pre-defined in a recipe and displayed on the panel – the annealing cycle en ...

For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching line for automated processing of strip material directly from the coil. The system is particularly suitable for the cost-effective production of perforated sheets, mounting plates, mounting rails, ventilation components and customer-specific stamped parts in medium and large quantities. Direct processing from the coil significantly reduces material consumption, set-up times and unit costs. LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system works with standardized thick-turret tools and enables highly productive production processes. Technical data Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine Type: CNC Coil Punching Machine/Punching Line Control: CNC, Siemens Simostar 370 Coil Processing Coil inner Ø: 508/610 mm Coil out ...

SCM Sandya Uno Wide Belt Sander Working width 900mm Working height 3-160mm Number of generators 2 Aggregate in rubber shaft Combi unit with boot 11kw main motor Pneumatic Oscillation Sandpaper Dimensions 930×1525 Two feed speeds of 4.5-9m/min Machine Dimensions:1560 x 1280 x 1920mm Weight about 1100kg Net price

The machine is in good technical condition; it can be tested by prior arrangement.

Manufacturer: DOOSAN Model: PUMA GT 3100 M Year: 2023 Condition: Used Stock number: 9431 Control system: FANUC i-Series Maximum turning length: 725 mm Maximum turning diameter: 376 mm Maximum turning diameter over bed: 720 mm Maximum turning diameter over support: 590 mm X-axis travel: 260 mm Z-axis travel: 830 mm C-axis travel: 360 Maximum spindle speed: 2800 1/min Maximum workpiece weight: 1000 kg Number of all tools: 12 pieces Number of driven tools in the turret: 12 pieces Number of axes: 3 pieces Max. rod diameter: 102 mm Weight: 5650 kg Equipment: Powered tools Baking (2 pieces) Suction

malfunctioning control unit

3-D coordinate measuring machine Measuring range X/Y/Z: 440 x 500 x 410 mm Measurement uncertainty X/Y/Z: 2.5 + 3.9L/1000 μm Max. table load: 227 kg Total weight 293 kg

Impressions=0 m, Condition= Very Good , Availability= 2026-08-20, Max. Die-cutting Speed 4000 sheets/h Die-cutting Precision ±0.25mm Max. Die-cutting Pressure 250T? Max. Paper Size 1500×1100mm Min. Paper Size 550×450mm Max. Die-cutting Size 1490×1090mm Paper Processed Cardboard 200-2000g/? Corrugated paper =8mm (max. thickness) Total Power 13.5KW/18KW? Weight 16T/18T Dimensions 4500×2300×2400mm 6600×2300×2400mm Very good condition Immediately available

Impressions=0 m, Condition= Very Good , Availability= 2026-08-20, 2026 Revision Max Speed Rating (Sheets / Hr) 9,000 / hour Substrate types (Paper / Board / Corrugate) Paper / Board Quick Action Plate Clamps Centre Line System Yes Stripping Station: Yes Blanking Station: No Oil heater with timer Yes Quick-lock Yes Pre-Make-Ready devices Chase changer Very good condition Immediately available

Impressions=0 m, Condition= New , Availability= 2026-08-20, ? HT760E used for hang tag, label, carton box, hand bag die cutting?creasing and cold embossing. ? Machine is equipped with vice feeding unit, pneumatic sampling, auto timing lubrication system, main dive gear chiller, etc. exerting the machine to work its full potential. ? Electrical components are all of international famous brands to ensure running performance. ? Electric control system monitors in real time the running state of the whole machine by PLC, electronic cam and photoelectric switch, which is convenient for fault diagnosis. ? Becker Vacuum pressure pump and Siemens Main motor; ? CNC ensures the parts’ accuracy; ? Equipped high capacity man-machine interface designs LCD. ? It shows solution for trouble shooting, routine maintenance etc; ? Full color Man-machine interface is more user friendly and easy  ...