bottle filling machines used for sale

Polar 92 CE, running daily, good condition with 3 extra knifes, one has been newly sharpened. Availble immediately.

Key data: 3500 kN, 70 mm

Netstal EVOS 3500/2900 - 350T Year: 2010 Model: EVOS 3500/2900 Tonnage: 350T Operating hours: 60,000 h Screw diameter: 70 mm L/D ratio: 27 Injection pressure : 2400 bar Injection volume (max.): 1078 cm³ Mold thickness (min./max.): 700 – 1150 mm Distance between tiebar (H x V): 730 x 730 mm Platen dimensions: 922 x 1086 mm Weight: 25,000 kg

Sewing machine MÜLLER MARTINI FKIV

Code: 0475 Brand: STRIEBIG - SWITZERLAND Model: AUTOMAT TRK 6220 AV Automatic vertical panel saw with scoring unit for precise cutting of wood panels, custom furniture, kitchens, bathroom furniture, doors, window frames, plastics, composite materials and various Technical data: Cutting length mm 5300 Cutting height mm 2200 Cutting depth mm 80 Blade diameter mm 300 F30 Speed rpm 4750 Motor power Kw 5,5 Scoring unit Support rollers on the table to facilitate panel handling Automatic vertical movement with speed regulator Automatic horizontal movement with speed regulator Intermediate support for small panels Suction mouth diameter mm 100 Overall dimensions of mounted machine : mm 6760 x 1800 x 3015 h Weight kg 1050 Overall dimensions for transport : Machine mm 6760 x 1800 x 2650 h - kg 450 - Beam mm 3000 x 1000 x 1000 h - kg 600

Key data: 40 mm

Column drilling machine Drilling capacity in ST 60 Ø40 mm Drilling spindle holder MK-4 Drilling depth 160 mm Drilling table surface 590 x 450 mm Min. spindle speed 700 1/min Maximum spindle speed: 1,400 1/min Length: 1096 mm Width 637 mm Height 2120 mm Weight 470 kg If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Calibration and fine sanding machine, wide-belt sanding machine with electronic segment sanding shoe and paint sanding A video of the running machine can be sent on request. Ideal automatic sanding machine for interior finishing companies, also suitable for intermediate paint sanding. Binding machine with combination unit and electronic link pressure bar, edge segments can be switched on and off Segment width of pressure beam 35mm Contact roller can be inserted pneumatically, low wear due to ribbed steel roller Grain size compensation Drive motor 7.5kW with automatic motor brake, infinitely variable belt speed frequency-controlled from 2 - 18 m/s Webbing feed infinitely variable via frequency converter from 2.5 - 13m/min Pneumatic Workpiece-Controlled Belt Blowout Device Cleaning brush on the spout Constant working height 900mm by adjusting the upper part of the machine, t ...

Heidenhain iTNC530Indramat10,000 mm1,500 mm2,500 mm0.001 mm20,000 NX 20,000 mm/min, Y 20,000 mm/min, Z 20,000 mm/min (16,000 mm/min at 2,500 mm Z stroke)20 micrometres (X over 2,000 mm; Y; Z)10 micrometres (X over 2,000 mm; Y; Z)CES rotary table 2,000 x 2,500 mm, max. load 20,000 kgISO 50 (CSN 22 0433 / DIN 2079-CC)20 - 4,000 rpm, continuous30 / 37 kW1,000 NmVK 4000 universal, VA2 4000 straight, VP2 4000 angular - all after overhaulChain type (Q) - R 40, 40 toolsDia. 130 mm adjacent / 250 mm with one free position; weight 25 kg; length 340 (unit given as kg in the offer, apparently mm)CTC max 80 s / CTC min 30 s50 kVA3 x 400 V, 50 Hz6 barLpA 80 dB, LWA 99 dBChain type chip conveyors with one chip containerCooling unit for thermal stabilization of the spindle head driveProtective fence with electric locking, protective cover of working area, stable operator platformNew wiring; new bearing ...

x-travel: 350 mm y-travel: 250 mm z-travel: 300 mm Control: SINUMERIK 828 D distance spindle nose and table: 120 -420 mm surface area: 520 X 300 mm table weight: 100 Kg T-slots: 5 T - slots distance: 45 mm T - slots - width: 12 mm turning speed range - milling: 0 - 10.000 U/min Torque: 33/41 0 spindle drive: 7/8,5 kW Tool taper: SK - 30 : 20 fach total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BORCHE BS 200 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of technical components and everyday products made from plastics of various shapes and for various purposes. A clamping force of 200 tonnes, combined with reliable components, ensures high efficiency even during intensive mass production. The parts are made by injection moulding, a process which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This method enables the rapid production of parts with complex geometries whilst maintaining high repeatability and a high-quality finished product. The BORCHE BS200-III Plus injection moulding machine can be further equipped with production automation systems that increase the efficiency of the entire  ...

Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Technical data: Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Pneumatic workpiece clamping Suction inlet diameter 60 mm Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440

ENGEL ES 1350/275 HL ST injection moulding machine was manufactured in 1999 in Austria by ENGEL Austria GmbH. The machine is designed for the economical production of plastic parts in various shapes, colours and for various purposes. This process utilises the injection moulding method, which involves injecting plastified plastic into a closed mould, where the material cools and takes on the mould’s shape. The combination of a high clamping force of 275 tonnes with proven components ensures high efficiency even during demanding series production. The ENGEL ES 1350/275 HL ST is fitted with a 60 mm diameter screw, which is responsible for plasticising the material and precisely feeding it into the injection mould. The ability to operate at increased injection pressure enables the processing of more demanding plastics and the precise filling of moulds with complex geometries. To increas ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16600 € : 318.72 € : 2050 mm : 4 mm : 140 mm : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic drilling and press-fit machine Hettich Blue Max mini Type 2/6 Drill in compact design with hand lever. Drilling gearbox with 6 drilling spindles, stop ruler with work table. 1 piece drill set. 2 pendulum stops. 0.8 kW, 230 V Areas of application & details: Multi-spindle drilling machine for furniture making and joinery, 6-spindle row drill for rows of holes, carcase drill for cabinet construction, automatic drilling and press-fitting machine for hardware assembly, industrial drilling machine for wood processing, row drilling rig for dowel holes, drilling station for mounting plates and hinges, precise multi-spindle technology for series production, workshop drilling machine for furniture parts, ideal for carcase production, kitchen construction, interior design, shop fitting, workshop production, small series, Repair shops and professional wood processing.

Eillert flume washer,, More information soon., Have a look at the photos and videos

Kronen GEWA5000 V, Washing machine GEWA 5000V PLUS with vibration outfeed (product outfeed over vibration screen) for bigger capacities, for example approx. 600-2500 kg per hour, depending on the product., Efficient and gentle washing of lettuces, vegetables and fruit by means of adjustable water rotation.

Newtec CELOX optical sorting line, Machine has been upgraded to the newer type CELOX in 2016, The order is based on the following specifications, Ambient temperature ± 5 – 25 ºC., Product Clean, washed carrots, Capacity: 8 to 10 tons per hour, depending on the batch, (quality and sorting), Product foreign materials The Celox cannot detect foreign materials such as glass,, wood, stones etc., Functionality:, Length: +/- 3mm (less than 1% errors), Diameter: +/- 1mm (less than 1% errors), broken: 60-65% is removed (on normal broken carrots) there will be 5-6% good, carrots among the errors, C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors, Volume: +/- 5%, -Incl. conversion of complete camera unit to new version, -9 Cameras with 8 megapixel resolution (current 2 magapixel), Cameras look at the carrots from above and below at an angle, -Better detection of roo ...

NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts an ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 16 mm : 16 mm : 10 mm : 13 mm : 11 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 7 mm : 7 mm : 4 mm : 5 mm : 5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...

DELTA LC 500 - Rotary Table Grinding Machine -CE marking -Year of construction 2011 -Magnetic Plate - Rotary Table 500mm -Max. grinding diameter 500mm -Distance column -Grinding spindle axle 315mm -Grinding height max. magnetic clamping plate - Grinding wheel 215mm -Speed grinding spindle 2840 rpm -Fine adjustment over micron 0.01mm -Rough adjustment (height adjustment) motorized via keyboard -Spindle motor 3 KW -Dimensions of the cup wheel 200x80x78mm -Machine enclosure -Coolant device -Documentation Dimensions: LxWxH 1.3x0.8x1.8 meters / Weight 800Kg

ALZMETALL AB 35S Column Drilling Machine -Drilling capacity steel: 40 mm -Casting drilling capacity: 45 mm - Spindle holder: MK4 -Projection: 300 mm -Quill stroke (drilling stroke): 175 mm -Spindle speed: 65–1,450 rpm (infinitely variable, 2 gear stages) -Automatic feed: 0.10 / 0.20 / 0.30 mm/rev -Table clamping surface: 600x460mm -Table adjustment: 600 mm -Table height-adjustable via hand crank -T-slot clamping table -Column diameter: 180 mm -Distance from spindle center to base plate: 1,165 mm -Base plate: 360 × 360 mm -Motor power: 3.5 kW -Operating voltage: 400 V -Continuously variable variable transmission -Automatic quill feed -Coolant device -Machine lighting -Speed display Dimensions: LxWxH 1.2x0.6x2.1 meters / Weight 1200Kg

ALZMETALL AB 35S Column Drilling Machine -Drilling capacity steel: 40 mm -Casting drilling capacity: 45 mm - Spindle holder: MK4 -Projection: 300 mm -Quill stroke (drilling stroke): 175 mm -Spindle speed: 65–1,450 rpm (infinitely variable, 2 gear stages) -Automatic feed: 0.10 / 0.20 / 0.30 mm/rev -Table clamping surface: 600x460mm -Table adjustment: 600 mm -Table height-adjustable via hand crank -T-slot clamping table -Column diameter: 180 mm -Distance from spindle center to base plate: 1,165 mm -Base plate: 360 × 360 mm -Motor power: 3.5 kW -Operating voltage: 400 V -Continuously variable variable transmission -Automatic quill feed -Coolant device -Machine lighting -Speed display Dimensions: LxWxH 1.2x0.6x2.1 meters / Weight 1200Kg

DELTA LC 400 / Rotary Table - Surface Grinding Machine -Magnetic clamping plate (turntable) 400mm -Max. grinding diameter 400mm -Grinding height (distance table - grinding wheel) approx. 220mm -Grinding wheel dimension / standard / 200x80x78mm -Speed / grinding spindle 2840 rpm -Fine adjustment 0.01mm -Distance / column - Grinding wheel axle 315mm -Spindle motor / 3KW -Side grinding wheel puller -Machine enclosure -Coolant device Dimensions : LxWxH 1.2x0.8x1.8 meters / Weight 700Kg

Key data: 8 mm, 8 mm

For sale is a Brandt edge banding machine bj. 2010 The machine was serviced by the Brandt company only 3 months ago. No defective available. For sale due to new acquisition. Special equipment in the pictures. Loading facilities available Price is net VAT

The machine is in good technical condition; it can be tested by prior arrangement.

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008 Injection Molding Machine Ferromatik Basetec 85-493-520 BJ 2009 Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006 Injection moulding machine Ferromatik K 110s-2F BJ 1999 Injection moulding machine Ferromatik K 125s/2F BJ 1995 Injection moulding machine Ferromatik K 200s-2F -493 BJ 1999 Angel Priam Bito Leo Locative Hot runner regulator Gammaflux G 24 Conveyor belts Temperature control units Accessories Walther Couplings

The machine underwent a complete overhaul in 2023, including the replacement of the control cabinet, MOOG scale, and a complete replacement of the control system with a Siemens one. The extruder is still connected and can be tested on a customer's mold. After the overhaul, the machine has operated for 9,100 operating hours. Possibility to purchase the entire production, including molds for 20, 25, and 30L canisters with caps.

Guild Master CTX 510 Control: Siemens 840 D with Shop - Turn Year of Make: 2004 Travel X / Z: 300 / 1050 mm Revolver: 12-speed Tool holder: VDI 40 Bsbmezmxz Roknrzodf Spindle speed up to: 3,500 rpm Bar passage: 90 mm Quill travel: 150 mm Tailstock Cooling 20 bar Chuck size 315 mm Spindle hours approx: 14,000 Batch sizes from 0 - 5 were produced on the machine Programming was done on the machine

Weiler DZ 40, Year of manufacture 2008, Control Siemens 840 D, Travel X/Z 200/350 mm, Turning diameter 180 mm, Bobmkney Ev Iujrzedf Circulation Ø max. 560 mm, Y axis +/- 25 mm, Q axle / programmable tailstock, Q axis travel 360 mm, Q axis measuring system rotative, Tailstock MK 4, Main spindle max. rod passage 42 mm, Spindle bore 52 mm, Rapid traverse X/Z/Q 30/30/20 m/min, Turret 16 speed - all stations driven, VDI 25, Shaft diameter 25 mm, Requested. Tools up to 4,500 rpm, Parts tray, accessories, Requested. Tool holders, rigid holders,

Number of spindles: 6 St. Working width: 15 - 250 mm Working height: 10-200 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ------------------------------------ - Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9 Touchscreen Manufacturers Description (Summary): ------------------------------------ 1st Spindle: HORIZONTAL BOTTOM ------------------------------------ Siemens IE3 motor with inverter brake: 7.5 kW D ...

Drilling and dowel insertion machine Gannomat model 280/284 with good equipment from first ownership: – Drill beam with 23 spindles, pitch 32 mm – 6 dowel insertion stations for Ø 8 mm, dowel length 25-50 mm – 1 pair of side stops – Stainless steel container for 5 kg of glue – Stainless steel container for 5 liters of water for rinsing – Fully automatic electronic control via foot valve with program selector switch – 5-stage glue quantity selector switch by means of time preselection by electronic control – Closed glue system with 6 bar glue pressure – Glue/water selector switch for flushing the glue system – Glue residue indicator indicator for glue container – Suction funnel Ø 100 mm – High pressure pump adjustable for glue pressure 6-24 bar – Mirror program electrically controlled – Special control 280-S2E for cycle time reduction � ...

Key data: 400 mm, 150 mm, 340 mm

Lid FP 1, Year of construction approx. 1983 / Overhauled by Arnold approx. 2012 3 axis digital display, Travel X/Y/Z 400/150/340 mm, Table size 600 x 210 mm, T-slots: 4 T - groove width: 12 mm Spindle speeds:: 20 - 2000 rpm Speed levels working spindle: 12 Feed stages: 10 Spindle holder: MK 4 Quill stroke vertical: 60 mm Machine weight approx.: 0.8 t

please ask for technical data Machine was not used by us because the production program has been postponed very good condition, can be viewed under power

Technical data: Manufacturer: Keyence Type: XM-C1000 Series 3D Projector Control: Keyence Measuring range: 600 x 300 x 200 mm Smallest display unit: 1 μm Smallest angle: 0.0001° Table load: max. 25 kg individual components 3D Manufacturing Probe: XM-P2000 Coordinate Measuring Machine| XM-C1000 3D Fabrication Measurement System Monitor: XM-M1200 3D Manufacturing Metrology Control Unit PC: XM-1600 Model RO66-55 3D Manufacturing Measurement System Camera and Table: XM-S1200 Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: incl. mobile tool trolley incl. per original packaging box

Bread roll system Inlet 190cm long and 20cm wide Roller mill adjustable 10-50mm height Output up to approx. 3,000 pieces SQUARE or TRIANGULAR Weight range approx. 5 – 2500gr depending on cutting roller and dough sheet thickness completely stainless steel clad with digital control incl. various cutting rollers Application: e.g. rustic rolls, ciabatta, mini baguette, triangular, etc

Key data: 7 , 170 mm, 140 mm

Four-sided planer Weinig Type: U 17 A Year of Make: 1979 Planing width 170 mm Planing height 140 mm Dressing table 1960 mm long 7 Waves: 1. Bottom 4kw 2. Right 3 kW 3. Left 4 kW 4. Right 4 kW 5. Top 5.5kw 6. Bottom 4kw 7. Universal 4 kW Feed speed max. 18.5 m/min. with manual Waxilit pump well-functioning condition

Gannomat Index 230 Trend Type: 470 Year of Make: 2005 CE CNC-controlled automatic drilling and insertion machine For the fully automatic drilling, gluing and insertion of dowels in woodworking. Working length 2300 mm, Workpiece length unlimited because it is open at the sides 4 stations drilling, doweling, glue Height adjustable from 10 – 37 mm with vibrating pot for dowels Single or multi-field operation Operation via screen Machine has been serviced every year and is in a in good working condition.

Automatic sawing, drilling and feeding machine Koch Type: SBD-B Year of Make: 1989 double-sided Working width 280 mm – 2500 mm for dowel diameters 8 and 10 mm right and left respectively: Saw, drill head with 3 drill bits spacing 20 / 25 mm, Dowel insertion for 3 dowels each also 3 drilling units from above and rear 2 drilling units from above with 3 vibrating pots for dowels Fault detection display Schleicher Elektronik Width adjustment via rotary switch Center crossbeam available for long parts Material transport by webbing Return conveyor belt at the bottom Dowels 10 mm in diameter, 40 mm long well-functioning condition

Henkovac TPS Compact XL tray sealing machine with automatic film rewinding technology Due to business closure, the a high quality Henkovac TPS Compact XL tray sealing machine for professional packaging of food under vacuum and modified atmosphere (MAP) for sale. The machine is in good, fully functional condition and is equipped with automatic film rewinding technology, which facilitates and speeds up the packaging process. Technical data: • Manufacturer: Henkovac • Model: TPS Compact XL • Operating voltage: 400 V / 3 phases / 50 Hz • Power: approx. 1.5 kW • Vacuum pump: 20–21 m³/h • Machine dimensions: approx. 580 × 730 × 1,300 mm • Weight: approx. 150 kg • Tool 1: (1x 1/2 GN) • Tool 2: (1x 1/8 GN) • Automatic film rewinding technology • Easy and fast tool change • Easy to clean • Suitable for vacuum and MAP (modified gas) packaging • Rea ...

Key data: 3100 mm, 2 mm

Cidan CNC swivel bending machine in top condition (please note, the matching scissors are also available) with rotatable upper beam 3m x2mm – top condition with CNC control and depth stop, The folding machine is in very good technical and optical condition, all bearings are flawless. The machine comes from a small business/first owner and is accordingly well maintained and maintained. The swivel upper beam has a goat's foot rail with segmented inserts and a sheep rail.

Key data: 3100 mm, 2 mm

Schechtl MAN 310 CNC folding machine with touchscreen. You will receive a proper invoice with VAT.

Capacity: max. 1800 kg/hr, Water inlet: 2 3/4, Water outlet: 2 x 2, Infeed height: 1360 mm, Outfeed height: 1060 mm, Power: 3 x 400V, 50Hz, 5.9kW, Dimensions: 3800 x 1000 x 2000 mm, Weight: 583 kg

NEGRI BOSSI V 160 - 610 CANBIO ?Année : 2001 Force de fermeture : 160T Volume injectable : 360 cm3? Capacité d’injection : 330 gr de PS? Diamètre de vis : 45 mm? Pression d’injection : 1700 bars ?Épaisseur moule mini/max  : 170 - 550 mm ?Course d’ouverture : 460 mm? Entre colonnes H-V :  510 × 450 mm Dimensions des plateaux : 780 x 730 mm? Commande : DIMI EL 2 Interface colorateur? Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 5,72 x 1,47 x 2,15 m Poids : 6150 kg

drill diameter: 2 - 25 mm drilling length: - mm lip angle: - ° total power requirement: 2 kW weight of the machine ca.: 0,25 t dimensions of the machine ca.: 0,8 x 0,8 x 1,5 m No. 5414 Drill grinding machine REMA S 2 - 25 Ø 2 - 25 mm Good condition from vocational school Incl. coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26901 Technical data: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 2.2 / 3.0 kW - Brush depth adjustment - Height-adjustable support table - Working height 900 mm - Space requirement approx. W 720 x H 1150 x D 450 mm - Weight approx. 180 kg

Offer 25440 Technical data: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 1.0 / 1.4 kW - Working height 900 mm - Space requirement approx. W 650 x H 1150 x D 450 mm - Weight approx. 100 kg

Single-station machine for containers up to 2 ltr. Extruder S 633/24D. Original condition, built around 1995

Single-station machine for containers up to 2 ltr. Extruder S 633/24D. Partial retrofit in 2019. Control system, control cabinet, cabling, frequency converter renewed. Very good condition

Single-station machine for containers up to 2 ltr. Extruder S 531/24D. Modernized and equipped with new Beckhoff control system. Good condition