bottle filling machines used for sale

Friction Stir Welding Machine SW BA312, Year of Build 2022, Machine No. 2320024, with tool holder HSK 63

Cleaning system ROLL RSB 0060-028-0540-03, year of construction 2017, S/N K05385, aqueous cleaning agent, cleaning cell, 2 rinsing cells, drying cell, circulating belt (vacuum pump missing)

plate thickness: 6 mm blade length: 200 mm angle adjustable from - to: fest 90 Grad table surface area: 750 x 500 mm pressure: t total power requirement: 3,0 kW weight of the machine ca.: 0,62 t dimensions: 1,2 x 0,8 x 1,2 m Combination machine: edging and notching - foot switch - Emergency stop switch - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 - Head Wire Stitching Machine

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

Combined hole punching, profile steel shears, notching machine, sheet metal cutting machine Manufacturer: Peddinghaus Type Peddimaster 60/100 Cuts: Round steel 45 mm Square steel 40 mm Angle steel 120 x 13 mm Flat steel 500 x 12 mm Projection 510 mm Cutting area 500 x 12 or 400 x 16 mm Punching diameter 27 in 17 mm Punching diameter 39 in 12 mm Machine weight approx. 2,400kg

There are 3 attachment mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 2. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 3. Manufacturer: Eirich Year of Make: 1984 Volume: 500l 3 first layer mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of production: 1974 Volume: 500l 2. Manufacturer: Eirich Year of production: 1974 Volume: 500l 3. Manufacturer: Eirich Year of production: 1984 Volume: 500l

Automatic labeling machine for top and bottom labeling of cans and jars. The system is designed for precise and efficient labeling in industrial production environments. Output: up to 120 labels/min.

very neat small folding machine. 4 pockets.

little used 1-head drill from Nagel

4 - Head Paper Drilling Machine.

2 head paper drill. Massiv on stand.

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary Die Cutter Equipped with : FFU-4055 flat feeder unit RD-4055 rotary die cutter SPC-4055 separator

Trumpf trulaser 3030

IDEAL 7260 Pile Cutter, Year 2019 electric, cutting length 720 mm, cutting height 80 mm, automatic pressing, programmable back gauge, Light barrier, air table, Made in Germany.

number of needles 1632 The 2014 Terrot S2112-2 is a highly specialized, industrial high-speed single-jersey circular knitting machine manufactured by Terrot, a premier German textile machinery company. Key Features & Capabilities - Machine Type: Single Jersey (Plain & Structured fabrics). - High-System Density: The 112 in the name relates to its ultra-high feeder configuration. It features an impressive 3.7 feeds per inch of diameter. For example, a standard 30-inch diameter version of this machine would pack roughly 110+ yarn feeders, allowing it to knit fabric incredibly fast. - Open-Width Frame: This model is designed to slit and roll the fabric out flat rather than collecting it as a compressed tube. This eliminates center creases entirely, preserving the absolute highest fabric quality. - What Its Best For: It is heavily favored for high-efficiency production of premium elastane- ...

Key data: 298 mm, 572 mm, 4000 1/min

Inv. Num. : 9320 Type: ST 20Y Producer: HAAS Created: 2022 Parameters: Switch-on hours: 1565 h Operating hours: 236 h Max. turning length: 572 mm Maximum turning diameter: 298 mm Grinding diameter: 533 mm Maximum length of travel in the X-axis: 213 mm Maximum length of travel in the Y-axis: 51 mm Maximum feed in the Z-axis: 572 mm Maximum spindle speed: 4000 1/min Maximum main spindle power: 14.9 kW Max. rod diameter: 64 mm Lathe chuck diameter: 210 mm Spindle bore: 88.9 mm Weight: 4754 kg

Used SCM S520 NOVA thickness planer useful working width mm. 520 Standard 4-knife shaft working height min/max mm. 3,5/300 max removal mm. 8 Double rubberized drive roller at the exit nr. 1 toothed drive roller at the inlet Electric Deck Lift 4-speed feed Star/delta starter Shaft rotation speed 4500 rpm Weight kg. 687 CE compliant

workpiece diameter: 5 - 1.000 mm module range: 0,2 - 25 helix angle: < 90 ° Control: Wenzel GearTec faceplate diameter: 750 mm x-axis: 1.200 mm y-axis: 550 mm z-axis: 1.000 mm total power requirement: 6,5 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.

CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of Make: 2008 Internal machine no. 69 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed 530 mm Speed: 4,200 rpm Tool turret 12 places (driven) C-axis 0.001 degrees Equipment: - One touch IGF - Chip conveyors - Touchsetter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Key data: 600 kN, 132 g/PS, 35 mm

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the ha ...

Key data: 1000 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 420C 1000-290U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the h ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorToolchanger with twin-grippertoolchanger with twin-gripperType of magazine ChainNumber of tools 40CabineFull protection cabinPackage Mill / Turn 20,000 rpm, H ...

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 550 x 430 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 35 mm - Screw length L/D: 17.3D - Dosing stroke: 140 mm - Screw speed: 20 – 480 rpm - Moulding volume: 135 cm³ - Injection pressure: 1,065 bar - Increased injection pressure: 1,620 bar - Heating power: 6.8 kW - Number of heating zones (including nozzle): 4 Clamping unit: - Maximum clamping force: 450 kN - Platen dimensions: 550 x 330 mm - Extended clamping plates: 550 x 430 mm - Minimum mould installation height: 180 mm - Maximum plate spacing: 530 mm - Opening stroke: 350 mm - Control system: EC 100 Drive: - Pump drive power: 11 kW - Approx. weight: 3,300 kg - Dimensions: 3,300 x 1,200 x 1,800 mm Current oper ...

clamping force: 4.000 kN injection volume: 2480 cm³ screw diameter: 90 mm platen size: 1.300 x 1.080 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 90 mm - Injection volume: 2,480 cm³ - Maximum shot weight: 2,232 g - Injection pressure: 1,360 bar - Increased injection pressure: 1,600 bar - Heating capacity: 64 kW Clamping unit: - Max. clamping force: 4,000 kN - Clamping plates: 1,300 x 740 mm - Extended clamping plates: 1,300 x 1,080 mm - Minimum mould installation height: 350 mm - Maximum platen spacing: 1,300 mm - Opening stroke: 950 mm - Core pull unit: 2-stage on BAP - Control system: EC 100 Drive: - Pump drive power: 55 kW - Weight (clamping side) approx.: 25,000 kg - Weight on injection side (approx.): 8,000 kg Discharge  ...

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kolbus RB 462 + FM year 1995 back gluing and lining nipping and smashing press in production good condition

TECHNICAL DATA: Machinable dimensions: min. 600 x 600 mm – max. unlimited Machinable height: min. 500 mm – max. 2300 mm Wrapping with stretch film Voltage: 220 V

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis ...

FOR NOW - This TOP NEW LOG CABIN CARPENTRY MACHINE from KRÜSI type. CMI 4 x4.. Year of construction 2018 - High equipment, price incl. all tools, accessories, swivel console, as well as dismantling. This is really a SUPER opportunity. Max. wood cross-section 245 x 250 mm - lengths 13 m. Fully functional, of course. New price approx. 256,000 euros gross. Sale as viewed ex site without warranty and guarantee. More details and your inquiry...

Table size: 3000 x 1000 mm Drive power: 4.0 kW Sanding belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Sanding belt lengths: 9000 mm Space requirement: 4750 x 2300 mm Machine height: approx. 2500 mm Compressed air: 6 bar Features: -Two sanding belts for pre-sanding and finishing sanding -Triangle guide of the straps for a clear view and freedom of movement -Pneumatic abrasive belt clamping with ball guides -Adjustable belt speed -Tilting of the sanding belts up to 90° -Self-centering abrasive belt -Pneumatically opening belt channels -Manual workpiece movement in 3-axis -Each axle with brake or lock -Vacuum tension for the workpieces

Max. diameter of the cut material ... 300mm Control Siemens ... Simatic S7-1200 Machine weight ... 1420kg L x W x H ... 2600x2080x2140mm The machine is in good condition. if possible under power.

EDM Charmilles Roboform 350 - EDM Roboform350 BJ 2006 EDM MV2400 BJ 2021

Knothole drilling machine Bäuerle Three-spindle drilling machine Type AL With 3 drilling jacks Drill bits can be individually Or be connected together by foot lever Stroke 80 mm Column projection 560 mm Two-jaw chuck clamping range 0-16 mm Motor power 0.7 kW Weight with pallet 450 kg Dimensions 880 mm x 750 mm x H 1750 mm Loading dimensions 1200 mm x 800 mm x H 1900 mm

Technical data: Manufacturer: Kunzmann Type: WF4 CNC Year of Make: 1999 Control: Heidenhain TNL 410 Travel: X 400 mm Y 320 mm Z 400 mm Working spindle Speed: 0 – 4,000 rpm Work table Dimensions L/W: 650 x 350 mm Tool/movement Tool holder: SK40 Quill stroke: 60 mm Dimensions and weight Dimensions: approx. 2,500 x 1,800 x 2,000 mm Weight: 1,800 kg Condition Condition: Used Functional: Tested and fully functional

Key data: 24000 kN, 150 mm

machine+robot

Key data: 27000 kN, 190 mm

incl. Viper Robot 90

Excellent production ready condition, no damages, config 4 plus 4 and delivery. Available immediately.

Key data: 520 mm, 250 mm, 5 kW

TECHNICAL DATA: Working width: 520 mm Working height: max. 250 mm 04 Knives Electric height adjustment 2-speed feed Installed power: 5.15 kW

turning diameter: max. 750 mm turning length: 3.500 mm turning length: Standard: 3.071 mm control: Sinumerik 840 D Siemens Working height: 1.300 mm axis stroke:: x-travel: 435 mm z-travel: 3.071 mm max. workpiece weight between centers: 2.000 kg Main spindle:: turning speed range - main spindle: 10 - 3.000 min/-1 power capacity - main spindel: 61,2 / 195 kW max. Torque: 779 Nm spindle head: A 11 DIN 55026 spindle diameter in front bearing: 180 mm Subspindle:: Spindle speed range subspindle: 10 - 3.000 min/-1 power capacity - Sub spindle: 73 / 233 kW max. Torque: 932 Nm spindle head: A 11 DIN 55026 spindle diameter in front bearing: 180 mm Turret 1:: U-axis: min. -5 - max. 430 mm w-axis: min. 276 - max. 3.347 mm tool taper: VDI 50 number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tool stations: max. 3.000 min -1 power capacity - driven to ...

Code: 0015 Brand: FRAVOL - ITALY Model: RAPID RX 700 - CE Standard Automatic electronic edge bander for EVA - PUR - POLYURETHANE glue, with grinding unit for applying Pvc, Abs , melamine , veneer , solid strip and roll edges, for joinery workshops, custom furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Panel thickness min/max mm 10/120 Panel length min mm 140 Panel width min mm 60 Edge thickness mm 0,4 - 16 Variable feed 10-20 mt/min Automatic presser lift Composition: Touch Screen electronic control 10,7" colour Controlled axis infeed guide Group 2 incoming grinders for perfect panel grinding - Motors Kw 2,2 - Rpm 6000 - Diamond tools mm 100 x 120 x 30 Infrared lamp 0-600 degrees - Watt 600 Cooling anti-adhesive spray system Edge height mm 120 Automatic edge loader Universal gluing unit with pre-melting unit for po ...

bore capacity in steel (diameter): 50 mm throat: 400 mm bore stroke: 250 mm taper MK: 4 MK table-size: 705 x 580 mm feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U turning speeds: 60 - 1205 U/min total power requirement: 4,0 KW weight of the machine ca.: 0,85 t dimensions: 1,2 x 0,8 x 2,55 m Column drilling machine with: - Power feed - Left/right rotation - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 3,5 mm distance between columns: 2050 mm daylight opening: 355 mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 3,5 x 1,5 x 1,5 m Bending machine - Bending angle preselection via limit switches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.