bottle filling machines used for sale

 Stirring machine - Stirring machine Rego SM 3  Manufacturer : Rego Type : Rego SM 3 with stirring and beating whisk with 20 liter stainless steel kettle with automatic timer Tested and cleaned See picture Shipping costs please ask for

Machine Type: Profile Bending Machine Make: COMAC Type: 308 Year of manufacture 2004

Inv. Num. : 9019 Type: W 100 A Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm

Inv. Num. : 9022 Type: CRYSTA APEX C9206 Producer: Mitutoyo Created: 2006 Parameters: Axis X: 2000 mm Axis Y: 900 mm Axis Z: 600 mm Max. workpiece weight: 400 kg

Year of construction/ retrofit 1995/2025 Bag in Box packaging machine (cartoner) Bosch, type CBK 409.1 BL / SCK 2500, year of construction 1995 (retrofit 2015) Folding carton formats (LxWxH): 143 x 60 x 218.5 mm 143 x 51 x 220 mm 143 x 46.9 x 219 mm 138.4 x 49.9 x 173 mm Condition: fully functional, well maintained Machine weight: 5600 kg Current formats: see documents Instruction manual: see documents

Inv. Num. : 8949 Type: BUAJ 9 NC Producer: JUNKER Created: 2005 Parameters: Maximum sanding length: 320 mm Grinding diameter: 160 mm Tip stroke: 85 mm Drive power of the grinding wheel spindle: 2.2 kW Maximum speed of the grinding wheel spindle: 3600 1/min Machine height: 1700 mm Machine length: 2300 mm Machine width: 1800 mm Machine weight: 1400 kg

DEMAG Sumitomo SYSTEC 210-840 Clamping Force: 210 T / 2100 kN Year: 2009 Screw Diameter: 50 mm Injection Volume: 442 cm³ Polystyrene Mold Weight: 402 g L/D Ratio: 20 Injection Pressure: 1946 bar Distance Between Tie bar: 580 x 580 mm Platen Dimensions: 860 x 860 mm Mold Thickness Min / Max: 340 / 690 mm Opening Stroke: 575 mm Weight: 9.6 T Dimensions: 6.0 x 1.70 x 2.0 m

SANDRETTO serie 7 160/40 Force de fermeture : 40 T / 400 KN Diamètre vis : 28 mm Volume injectable : 80 cm3 Poids de la moulée en PS : 77 gr Rapoirt L/D : 23 Pression d’injection : 1970 bars Distance entre colonnes : 266 x 266 mm Epaisseur moule Min / max : 100 / 350 mm Course d'ouverture : 270 mm Poids : 2300 KG

band width: 150 mm band length: 3500 mm band speed: 30 m/sec Scheiben-Ø: 400 mm grinding feed: 0 - 5 m/min work piece revolutions: 0 - 140 U/min power capacity - workpiece power: 2,2 kW grinding diameter: 100 - 600 mm clamping length: 6000 mm bed length: ca. 8000 mm voltage: 380 V / 50 Hz motor speeds:: 1450 U/min power capacity: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 8,6 x 2,6 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993

tube diameter: 6 - 42 mm wall strength: 3 mm bending radius min.: 180 mm bending radius max.: 5 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Equipment: Saw unit Notching unit Deburring unit for internal and external edges Flaring unit / flaring function (necking / expanding) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a Keyence IM-8030 digital measurement projector with IM-8000 control unit. Year of construction is 2023. Prior sale and errors excepted.

- Touch Screen Monitor - air table - side air table, left/right - air corners - Autotrim - Baumann Multistapler BA N - Spare knife

VOUMARD Model: CNC 300 Condition: Excellent Year: 2007 Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Travels Display .0001degrees or .0001mm A - 360 degrees - 34 t/min B - -20/+1 degrees - 240 degree/min C- 360 degrees - 500 t/min U- 300mm - 20 m/min X - 300mm - 20 m/min Z travel - 1000mm - 20 m/min 4 position turret Workhead Through Bore - 50mm Rotation Speed - 850 Max workpiece weight - 200 daN at 100 mm from flange Taper - metric 70 Weight - 8000kg

Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg

The machine is in good technical condition, testing is possible by prior arrangement.

Code: 0345 Brand: STROMAB Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Injection moulding machine Arburg 270s 500-60 and Boy 12 M 1998

One used complete mesh ( standard, special and engineered mesh ) for sale, exesting of: One used JAGER SCHLATTER Superflex mesh welding line: The Superflex system processes all materials used in the reinforcing mesh industry and offers maximum design freedom with the programmable mesh linear extension. The system is equipped with motorized, infinitely adjustable compact welding groups that automatically adapt to the geometry of the next mesh. This feature enables seamless transitions and quick adaptation to changing production requirements. Variable cross wire spacings can be precisely implemented, making the system ideal for the production of list and special mesh. This versatility gives companies a clear advantage in the reinforcing mesh market and enables economical production with a high degree of flexibility. One used Progress MSR2 straightening/cutting machine is a high- ...

max. bar Ø: 42 mm Max. speed: 4,500 1/min 8-station turret of which 4 are powered Travel X= 110, Y= 50 mm 2. 8-station turret of which 4 are powered Speed driven tools: 6,000 1/min 1 longitudinal carriage 1 vertical slide Pick-up spindle Chip conveyor IEMCA BOSS 545 Bar Feeder Weight 4100 kg

turning diameter: 320 mm turning length: 600 mm control: Fanuc Oi-TD spindle bore diameter: 74 mm number of controlled axis: 2 turning speed range: 3000 U/min rapid speed: 20 m/min number of tapers in turret head: 12 direkt tail stock: Ja power requirement: 15 kW weight: 5,0 t dimensions: 3,7 x 1,6 x 2,0 m Used CNC- Lahte 2 axis - 3 jaw chuck Ø 250 mm - chip conveyor - oil dust collector - Tool presetter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm table-size: 900 x 530 mm control: Heidenhain TNC 355 tool adaptor: ISO 40 | | turning speed range: 40- 4000 U/min rapid speed: 5 / 6 m/min feed speeds: 2 - 3000 | mm/min | power requirement: 6 kW table load: 350 kg dimensions: 2,6 x 1,8 x 2,2 m weight: 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Homogenizer APV Rannie BLP 63.60 Manufacturer: APV Homogenisers AS Model: Rannie BLP 63.60 Machine Type: Homogenizer Serial number: 1.97.187 Year of Make: 1997 Max. pressure: 70 bar

DIGI AW-4600e Packing Machine from closed real market YOC 2014 has been plugged in, weighs and prints, but the shell does not automatically enter the machine, possibly just a matter of adjustment. It is not known if the machine is complete and works completely therefore at a special price

Sell a notching machine from FIM in good condition!

For sale is a labeling machine from the manufacturer Gernep. The machine was completely overhauled in 2021 and was only rarely used afterwards. Currently, the machine does not have the unit for back labeling installed, but it would be available if required. Technical data: Manufacturer: Gernep Model: Labetta 4/3/8 Year: 2001 Capacity: 8,000 bph Bottle type: Euro bottle - Control: Siemens S7, machine is frequency controlled via a FU - Inlet/outlet: left/right Please inquire for further data.

For sale is a labeling machine from the manufacturer Gernep. The machine was completely overhauled in 2021 and was only rarely used afterwards. Currently, the machine does not have the unit for back labeling installed, but it would be available if required. Technical data: Manufacturer: Gernep Model: Labetta 4/3/8 Year: 2001 Capacity: 8,000 bph Bottle type: Euro bottle - Control: Siemens S7, machine is frequency controlled via a FU - Inlet/outlet: left/right Please inquire for further data.

This machine is designed for cutting stacks of paper to a specific size. Cutting length: 475 mm Insertion depth: 458 mm Width x Depth x Height: 762 x 1053x1296 mm Good condition

Manufacturer NICOLAS CORREA Model FP 35 UAGA Year 2006 CNC HEIDENHAIN iTNC-530 Table surface 4,500 x 1,500 mm Allowable weight on table 15,000 kg. Travel (X / Y / Z) 3,500 / 2,600 / 1,000 mm Pitch between uprights 2,300 mm Fast Forward Axles (X) 15,000 mm/min Fast Forward Axles (Y, Z) 12,000 mm/min Maximum Working Advance 5,000 mm/min UAGA Orthogonal Automatic Head INCLUDED Head with Automatic Rotation 2, 5º /2.5º Speed of the UAGA Orthogonal Head 3,000 r.p.m. ISO-50 Head Cone Main Motor Power 22 kW No. of Speed Ranges 2 Direct Output Head INCLUDED Head Speed Direct Output 5,000 r.p.m. Automatic Retractable Support l on the Right side for Orthogonal UAGA INCLUDED Automatic Retractable Support l on the Left for Direct Exit Head Cover. INCLUDED Automatic head pickup INCLUDED Automatic tool loader INCLUDED Loader positions 30 HEIDENHAIN HR 410 Portable Button Pad  ...

Wire Bending Machine WAFIOS AG BM 30 – 2017 | Very Good Condition For sale: high-class CNC wire bending machine WAFIOS BM 30, year of manufacture 2017. The machine is in very good technical condition, with low operating hours – ready for operation without additional investment. Key parameters: Wire diameter range: 2.0 – 6.5 mm Working range: 600 N/mm²: 2.0 – 6.5 mm 1,200 N/mm²: 2.0 – 4.5 mm 1,900 N/mm²: 2.0 – 4.0 mm Optional: capability to process wire from 1.5 mm Maximum feed speed: 120 m/min Bending torque: approx. 250 Nm Number of CNC axes: 7 Equipment: Decoiler Safety fencing Drive rollers (3 pairs of feed rollers) Functionality and capabilities: Unlimited rotation angle of mandrel axis and bending shaft Precise bending head operation (vertical and lateral movements) Possibility to extend functionality (e.g. CNC support plate) High pro ...

Year: 2016 - technically efficient, ready to work – after full service - motor: 3 kW/400V - milling diameter: 250 mm - milling width: 305 mm - material stop can be rotated in both directions up to 20° - vertical and horizontal pneumatic profile clamping - compressed air preparation station - cooling and lubrication system

High Speed Bench Drill, Made in Germany -Clamping table: 290 x 225 mm -Travel distance: 150 mm with hand crank -Spindle mount: Drill chuck included -Drilling capacity in steel D 1 - 6 mm -Projection: 180 mm -Speeds: 900 - 10,000 rpm 8 steps -Column: Diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Voltage: 380 V -Dimensions: 640/330/H740 mm -Weight: 92 kg

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

faceplate diameter: 4000 mm swing diameter: 4200 mm turning height: 2000 mm workpiece weight: 50000 kg cross travel of ram-slide: 2300 mm slides vertical travel: 1250 mm swival range +/-: -15/+30 Grad faceplate turning speed range: 0,5 - 55 U/min Control: Fagor 8055i CNC total power requirement: 182 kW weight of the machine ca.: 134 t dimensions of the machine ca.: 5920 x 10200 x 8400 mm Machine overhauled in 2008 - CNC Control FAGOR 8055i - Tool C8 - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 790 mm table load: 500 Kg swivelling range: 0 - 135 Grad turning speeds: max. 2,0 U/min connected load frequency: 400 V weight: 0,95 t Dimensions (LxWxH): 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

90 x 190 x 140 cm

120 x 80 x 190 cm

60 x 120 x 120 cm

60 x 120 x 120 cm

DIVIDER

With one bowl

- 4 spindle drilling machine - Standing model

- Banding Machine - desk model

Inv. Num. : 9040 Type: EasyCut 9001.30 PG Producer: MicroStep Created: 2015 Parameters: Work table length: 9000 mm Work table width: 3000 mm Plasma Source: Formica ForCUT 163WDM

Reference ID PP-57800 Category Flatbed Die Cutter Manufacturer Bobst Model SP 130-E Year Built 1985 Color - Impression - Working Hours - Speed 7000 sheets/h Max. size 130x92 cm Min. size 58x45 cm Condition Good Location Europe Availability Immediately

Universal tool milling machine DECKEL FP 4 MK with 3 axes active digital display Heidenhain TNC 113 Year of Make: 1990 Travel: X 500 Y 400 Z 400 Speed range: 50 – 2500 rpm With the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Hydraulic tool clamping Hydraulic vise GRESSEL 125 mm Various SK 40 milling mandrels Splash guard cabin Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions

Built in 1995 4 drilling spindles with automatic table movement Adjustable drill spindle spacing electr. Footswitch Mobile substructure Delivery date: immediately

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Kündig ENORM PRIMO – TOP CONSTANT TABLE MACHINE / automatic Headhead delivery Wide-belt calibration fine grinding machine Combination unit contact roller and pneum. - Sanding pad unit Enormatic Digital thickness display for workpiece thickness Belt drive motor power approx. 9 kW Contact roller level infinitely variable according to grain scale Infeed table and run-out table with roller support Working width 1100 mm Feed speed 2.5 - 15 m/min Machine is WORKSHOP OVERHAULED from stock Lieboch  

Machine type: Cleaning system aqueous Make: LPW Type: PowerJet 670T4 Year of Make: 2010 due to a move and the lack of use, the cleaning system is sold very cheaply. Original price approx. 450.000,00€ The system has two working chambers and is suitable for demanding cleaning tasks, including the application of corrosion protection on an aqueous basis. The machine ran for the last time in 2023 and requires major maintenance before recommissioning.