138,061 used machines on RESALE, but how to find them? Machine Search
Specifications Manufacturer Benhil Model 8311 Junior Condition Used Type of Machine Butter Packaging Machine Capacity ± 600 Kg/h Capacity (Units) up to 40 packages per minute Packaging Weight 250 gram Packaging Size 100 x 75 x 35 mm (German standard) Packaging type Bottom folding Motor power 1,5 kW Weight ± 840 kg Description Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor.
Specifications Manufacturer Benhil Model 8312 Junior Year 1977 Condition Used Serial Number 312/57 Type of Machine Butter Packaging Machine Capacity ± 750 Kg/h Capacity (Units) up to 50 packages per minute Packaging Weight 250 gram Packaging Size 100 x 75 x 35 mm (German standard) Packaging type Bottom folding Motor power 2,2 kW Dimensions 300 x 170 x 200 cm Weight ± 1.275 kg Description Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. T ...
x-travel: 450 mm y-travel: 300 mm z-travel: 350 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Copy cutter Helma Type: CF 40 Machine No. 7825 Table dimensions 700 x 1120 mm Diameter of the 2 working spindles 30 mm Working spindle speed 10500 rpm max. milling height 100 mm Vertical adjustment of the cutter heads or milling cutters for profile correction 10 mm max. distance between the spindles from center to center 450 mm Distance between feed shafts from center to center 235 mm Spindle motors 2 x 5.5 kW Feed motor 0.37 kW Feed speeds 1.8 – 10 m/min. infinitely variable Air consumption max. 20 l/min. Net weight of the machine 900 kg
BERNARDO Variomill FU 2000E Servo universal milling machine was built in 2020 in Austria by PWA Handelsgesellschaft m.b.H. The machine, distinguished by its stable design made of grey cast iron and the use of modern technologies, is the perfect choice for machining heavy, oversized workpieces. All linear axes are driven by high-performance servo motors, which guarantee appropriate accelerations and feed rates in each direction. What’s more, the X axis has been coated with a special Turcite B coating to reduce the effect of slippage. All of this, combined with extensive equipment, maximises the precision and repeatability of the produced parts, even during the most intense challenges. The Variomill FU 2000E Servo vertical milling machine weighs 4500 kg. Technical specifications of the BERNARDO Variomill FU 2000E Servo milling machine - feed in the X/Y/Z axis: 1400/700/500 mm - rapi ...
Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10
Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...
Machine in standard version for automatic sharpening of straight knives in the planing head - Planer head diameter min. 85 mm to max. 225 mm - Tool length max. 330 mm (table stroke 440 mm) - Number of cutting edges arbitrary - Free angle infinitely adjustable 15° - 35° - Grinding spindle speed n=4,000 rpm. - Grinding wheel D=125 mm, bore d=20 mm - Grinding motor 1.1 KW, n=2,850 rpm. - Feed motor 0.053 KW, n=1,300 rpm - Grinding speed 650 mm/min. - Partial motor 0.033 KW, n=1,300 rpm. - Freely selectable grinding circuits per tool 1 - 5 - Coolant pump motor 0.065 KW, n=2,900 rpm. - Coolant / tank capacity approx. 115 litres - Mandrel (NEW) D=50 x 330 mm - Machine complete with accessories Machine dimensions: H=1200 mm, W=1,150 mm + D=820 mm / Weight approx. 450 KG Condition: Refurbished by qualified personnel, everything renewed and straightened, function tested, ...
Key data: 4000 mm, 1560 mm, 32
CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...
Vertical Flow Wrapper VPX250 + Servo Screw Dosing SDX Rovema VPX 250/400 flow-wrapping machine, overhauled, incl. repainting RAL 9007, Siemens S7 machine control and operation Condition: very good Hours: 150 Availability: immediately Refurbished: 2021 Vertical Flow Wrapper VPX250 Machine equipped with sealing system for heat-sealable packaging materials (e.g. paper/bonding films 60-100μ), with e.g.: - Cross sealing jaws 270 mm - Corrugation cross sealing jaws horizontal 12.0 2.0 mm / to be determined by foil sample - Longitudinal seam sealing jaw 420 mm - Temperature controls via machine operation, incl. monitoring - Sealing temperatures are set via Siemens program and stored per program - New foil cutting blade, pneumatically controlled Capacity: flat tubular bags: up to a maximum of 80/min. Log bottom bags: up to a maximum of 55/min. Depending on bag format ...
Used grinding machine Vollmer CABG 50U – built in 1995 – Very good condition For sale is a fully automatic gang saw sharpening machine from the quality manufacturer Vollmer. The machine is in very good condition, is fully functional and can be used immediately. Ideal for sawmills or woodworking companies with regular sharpening needs. Specifications: Model: Vollmer CABG 50U Year of Make: 1995 Machine Type: Automatic Gang Saw Blade Sharpener Condition: Very good, regularly serviced Saw blade width: Up to approx. 200 mm Saw blade length: Up to approx. 1650 mm Rake angle adjustment: Approx. -10° to +25° Tooth pitch: Adjustable (depending on the type of saw blade) Abrasives: CBN or diamond grinding wheels Grinding cycle: Fully automatic incl. infeed and return Control: Electronic with program selection Cooling: Integrated coolant supply Connected load: 400 V / 50 Hz ...
3M-Matic 800a-E Type 29600 (5799) Carton sealing machine for lid and bottom closure with adhesive tape, side belt belt drive system, carton format range in mm length 150 - ~, width 115 – 550, height 120 – 625, manual carton size adjustment, maximum carton weight approx. 38 kg, roll discharge with a length of approx. 1200 mm, drive laterally, electrical connection 380V/50Hz/3PH/1.4A, 260W, machine in mobile version on rollers, output up to 40 cartons per minute
Vacuum injector micro blasting machine Specifications: -Applications: - Demoulding beams, electrode production, primer preparation - Structuring rapid – tooling technology, cleaning blasting (soft blasting) - Vacuum cab with viewing window with motorized tilting hood - Tilting hood tilts motorically up to 90 ° - Blasting chamber accessible by hand, with two work gloves - Strahlpistollen - Steel turntable manually rotatable 1000 mm - Blast room interior height 500 / 840 mm - Internal blasting room width + internal blasting room depth 1100 mm - Abrasive drying system can be infinitely adjusted electronically - Microfilter dedusting system – IMF type unit - 2 - Compressed air connection up to 10 bar - Drive 400 V / 2.9 kW - Space requirement approx. W 1400 x H 2300 x D 3100 mm - Weight approx. 900 kg - Separate work platform with st ...
Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120
Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table
Clamping force 1800 kN. Extruder S 120/28D. Accuhead 25 ltr with 100-point programming. Die dia min/max 150/450 mm
Surface grinding machine, Asyst PNC100 CNC [ELB], 600200, wheel 300 mm 40, The machine is in our warehouse in Gussago BS.
CNC CO2 Laser Cutting Machine Bystronic Bystar 3015 Laser source: ByLaser 4400, Laser power: 4400W (4.4kW), Working area X/Y/Z: 3000mm/1500mm/170mm, Max. workpiece weight: 890kg, Positioning accuracy: +/-1mm, Repeatability: +/-0.05mm, Rapid traverse: 50m/min, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, Max. sheet weight: 160kg/m². Control: ByVision CNC, Video on request
Perfect binding line - Back Gluing Machine for Hard Cover Fully rebuilt in 2011 Equipped with : 1 x Wohlenberg Master 7000 – 19 clamps binder Cover feeder Gauzing station Cold glue & PUR gluing unit 2 x Nipping stations Conveyor system 1 x Wohlenberg Sprinter 7010 - 20 stations gatherer Criss/Cross delivery Optigraf sheet control system 1 x Wohlenberg Trim-tec 60i trimmer (2006) 1 x Stacker
Chiller - Euro Cold 09-CF-02960 / New, unused Year of Make: 2014 Location: Lodz, Poland Description: Cooling capacity approx. 45 kW Refrigerant R407C The device has: - 1 compressor - Separate container for medium - Barrel pump -Radiator - Fan x 2 The device has an additional heating function and can be used to control the temperature of tools The device after maintenance, fully functional 3-month operating warranties in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Cooling unit (chiller) - Euroklimat RKO. E-B/ST/AS 201S / Perfect technical condition Year of Make: 2019 Location: Lodz, Poland Description: Cooling capacity approx. 60 kW Refrigerant R290 The device has: -Compressor - Separate container for medium, approx. 200l -Circulating pump -Heat exchanger -Radiator - Fan x 2 Depending on the load, the fans can work at different speeds The device is suitable for outdoor work The unit can work as a heat pump and has heating and cooling functions The device after maintenance, fully functional 3-month operation warranty in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Chiller - Hyfra Chilly 35 Year of Make: 2007 Location: Lodz, Poland Description: Cooling capacity approx. 6 kW The device has: -Compressor - Liquid containers - Circular pump -Heat exchanger -Fan Refrigerant 407C The device after maintenance, fully functional 3-month operating warranties in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 3200 kN, 359 g/PS, 50 mm
1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.
Packaging machine Paal / Bosch ELE 2ALS 1995 (Retrofit 2015) Retrofit (modernization): 2015 Availability: from August 2025 Condition: fully functional Connected loads: 400 V, 3 Ph, 50 Hz
Key data: 762 mm, 3048 mm, 813 mm
Minakuchi CNC Cylindrical Roll Grinder Year of Manufacture: 1990 Control: Fanuc Series O-GC (parameters need reloading) Technical Specifications: • Max. Swing: 32” (813 mm) • Distance Between Centers: 120” (3048 mm) • Max. Grinding Diameter: 30” (762 mm) • Grinding Wheel Size: 24” x 1.968” x 10” • Max. Grinding Wheel Width: 1.968” • Spindle Speeds: 1410 / 1530 RPM • Grinding Wheel Motor Power: 30 HP • Workpiece Weight Capacity: 20,000 lbs (approx. 9,070 kg) • Machine Weight: Approx. 30,000 lbs (13,600 kg) Equipped With: • Fanuc Series O-GC CNC Control • Remote hand wheel • Control Panel with Jog / Auto / Handle Modes • Spindle inching, feed hold, emergency stop, ZRN • Taper and crowning grinding capability • Wheel head motor • Work head & tailstock • Work rest supports • Extra wheel hub • I. ...
Key data: 585 mm, 4064 mm
JARBE Universal Cylindrical Grinder Year: 1981 Technical Specifications & Features: • Swing Over Table: 23″ Distance between centers 160” • Hydraulic Table Traverse • Swiveling Table for Taper Grinding • Universal Workhead • Universal Wheelhead • Grinding Wheel Capacity: 20″ • Includes 2 Workrests • Equipped with Coolant System • Electrics: 440 Volt
Measuring arm from Hexagon, demonstration device, in-house since August 2024 but not in use
Key data: 3000 kN, 900 g/PS, 60 mm
Injection molding machine Krauss Maffei Km 300 1400 C1 BJ 1998
Injection moulding machine Krauss Maffei KM 125-390 C2 BJ 2004
OptiGrind GU18 Double Grinder 0.45kW 230V 50Hz Grinding wheel 175mm x25mm Speed 2850 rpm G&STÜ-3101510
Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.
Zeiss Pro T advance 16/21 measuring machine
Injection moulding machine Arburg 470s 1100/290 YOC 2017 2 K
2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003
Injection moulding machine Arburg 570C 2000/150 60 2 K BJ 2007
Injection moulding machine Netstal synergy 600/110 BJ 2001
Vertical injection moulding machine Arburg 900 T 800/150 BJ 2001
Injection moulding machine Arburg 320C 600/250 BJ 2002
Injection moulding machine Arburg 470C 1600/625 Bj 1995
Measuring machine Zeiss Prismo 7 BJ 1997 generallueb. 2024
CNC lathe Padovani BJ 1996 including the stainless steel tub
OFFER - KRÜSIMATIC from Krüsi G1 4 axis system 1 used carpentry machine from KRUeSI type Kruesimatic G1 Year of manufacture 2005 Can be operated with all carpentry programs such as Catwork, SEMA, Lockrichs, S & S, Nut Reiner, etc. 4 axis system with dovetail cutter Task / Editing from right to left 6 Side processing without having to turn the wood! Total length approx. 18 m Weight 5.5 t BTL controlled for interface to the office or of course manual input on the machine. To increase the cutting performance, the feed rate is frequency-controlled and can be optimized for many cross-cut cuts Platform height without floor shaft 920 mm Sections fall into mobile box incl. chips The system only needs to be connected to the electrical cabinet with plugs Max. wood cross-section - 200mm x 320 mm Plant set up and ready for demonstration Available IMMEDIATELY The entire system ha ...
Key data: 4000 kN, 80 mm
Machine + Viper Robot 12
a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.
Key data: 4 , 180 mm, 110 mm
SPECIFICATIONS: Length of the planer: 2300 mm Working width: 180 mm Working height: 110 mm Spindles: Ø 35 mm Number of spindles: 4 Chain drive (1.70 kW) Speed: 6000 rpm Installed power: 16.5 kW Voltage: 380 V SHAFT CONFIGURATION: I bottom (5.5 kW) II right (5.5 kW) III left (5.5 kW) IV top (5.5 kW) EQUIPMENT: 01 Unloader 01 Return Conveyor
Key data: 4 , 180 mm, 120 mm
SPECIFICATIONS: Length of the planer: 1700 mm Working width: 180 mm Planing height: 120 mm Spindles: Ø 35 mm Number of spindles: 4 Chain drive (1.70 kW) Speed: 6000 rpm Installed power: 16.5 kW Voltage: 380 V CONFIGURATION OF THE SPINDLES: I bottom (5.5 kW) II right (5.5 kW) III left (5.5 kW) IV top (5.5 kW)
maximum number of results exceeded
please refine your search
