bottle filling line used for sale

Bosch VRM 6040 Lid Screwdriver Condition: very good (used) Description: Capper, Can Capper, Can Capper, Can Sealer The machine is high performance and has 4 heads. It can be run up to 120 pieces per minute, but we have driven it to 30 pieces per minute. Currently the machine is set to 400 ml cans from Obeck with (I think 89 mm lid), but the setting can also be changed. The machine has always been serviced and it works perfectly. Capacity: 120 cans per minute The machine is in perfect working order and can also be inspected on site. The only reason for the sale is the change in the packaging of our product.

Complete line for filling cans Very good condition! We have used the system for dry pipe tobacco. It can be used for all easily free-flowing products, such as spices, nuts, seeds, gummy bears and many other types of food. All components of the line are matched by an experienced team and have been used as a complete line. If you want to fill easily free-flowing product into cans or even first into bags and then cans (both possible), then this is the perfect line for you. The system can be filled into tubular bags as well as directly into cans. The entire line has a capacity of 30 cans/minute. Some components of the line, such as the capper and the labeler, even have a significantly higher capacity. Adapted for 400 ml cans, we used Obeck and Polipack and both ran perfectly. Other can formats are possible, but the system can be adapted (extra costs are incurred for this ...

Linear scale for powders and granules. Weighing takes place directly in the container to be infected (buckets, cans, cups. Conversion to bags or sacks possible). Weighing range up to at least 10 KG German make. Very good condition. Partially overhauled. Tested and functional. With hopper, about 100 liters, made of flexible material and with punchers to avoid bridging in the hopper. For safe separation organic - conventional, a second, different coloured hopper can be made (additional option). Video link shows a similar machine Subject to prior sale.

Optima Limoline filling and capping machine for plastic bottles for test kits for the diagnostic sector with screw caps including Franz Ziel laminar flow hood and downstream labelling, possible object diameter for round containers from 30 to 95 mm, square containers 30 to 90 mm, possible container height from 35 to 175 mm, possible screw caps up to a maximum diameter of 50 mm, bottle holder with sorting disc with a diameter of 1250 mm, Vacuum conveyor belt with a length of 1800 mm, ionization, tare scale, 2 filling stations for microdosing by means of a peristaltic pump (dosing range per peristaltic pump 1.0 to 125 ml., filling accuracy +/-1% at 1.0 ml.), gross weigher, screwing station including closure feeder, screwing station, outlet with bad ejector, good discharge directly into downstream BBK labeling system for all-round labeling of cylindrical objects with self-adhesive labels wit ...

Professional dosing and filling system with Soehnle scales & 3010 control system For sale is a high-quality, compact stainless steel filling system/dosing system for precise filling and weighing of bulk materials. The system is characterized by its robust stainless steel construction, intuitive operation and high flexibility. - Powerful weighing system (up to 15 kg per dosage): The built-in weighing element is specially designed for containers and portion sizes of up to 15 kg. - Soehnle Professional 3010 industrial controller: High-quality, freely programmable terminal. The terminal itself is industrially designed for measuring ranges of up to 120,000 kg and offers maximum accuracy, flexible dosing settings and signal processing at industrial level. - Integrated sieve function: The dosing / conveying channel is equipped with a perforated plate. This means that fines or ove ...

Liquid filling and capping machine for vials and bottles Manufacturer: Bausch & Ströbel Type: KSF 1020 Year of Make: 1998 Stainless steel version, equipped for filling and capping vials/bottles 2 filling points for stable bottles, object Ø for round objects 16-100 mm, for flat objects 16 x 16 - 100 x 100 mm, H 35-310 mm, depending on the format set Capacity max. 3,000 objects/h depending on the product Filling range depending on the pumps 0.3-540 ml/bottle, with 2 successively installed stainless steel rotary lobe pumps per pump 8 - 50 ml Single filling (max. 50 ml) and stepped filling (max. 100 ml) possible with existing pumps Drip protection 1 transfer station for screw caps Ø 22.0 x 20.5 mm with screwing head and vibrating pot Format sets for bottle Ø 24.2 x H 63.7 mm, Ø 28.6 x H 71.5 mm, Ø 37.7 x H 92 mm 2 sets of filling needles, 2 pieces each, different di ...

Filling and Sealing Machine for Vials & Bottles Manufacturer: Bosch Type: VSR F01 Year of Make: 1988 Machine for filling, pressing in dropper inserts and capping with screw caps of vials and bottles (stable) Capacity max. 80 objects/min 6 filling stations with 6 rotary vane pumps for filling range 20-100 ml, other filling areas possible by purchasing new pumps 1 new replacement pump for filling range 20-100 ml Drip protection by suction Bottle feeding through infeed turntable Bottle drain through drain turntable Pressing station for drip insert Ø 12.2 x 19 mm with sorting pot Screwing station with pre-screwing and post-screwing for screw cap Ø 20.5 x 32 mm with sorting pot Vacuum pump Available bottle formats (all information without guarantee, no guarantee of completeness): Ø 24.2 x 63.3 mm (10 ml), Ø 29 x 74.2 mm (20 ml), Ø 32.2 x 83.8 mm (30 ml), Ø 35.4 x 7 ...

Fimer SRT 9-9-1S Filling MonoblockTechnical Specifications & Performance DataFimer SRT 9-9-1S is a used wine filling monoblock built in 1998, designed for glass wine bottles. The system combines rinsing, vacuum-assisted filling and cork capping in a compact bottling equipment configuration. Its filler is equipped with 9 filling valves assisted by a vacuum pump, while the integrated rinser includes two water-filtration units.Manufacturer: FimerModel: SRT 9-9-1SYear: 1998Speed: 1.800 BPH on 0,75L Format.Filling configuration: 9-valve filler with vacuum pump assistanceIntegrated functions: rinsing, bottle evacuation, inert-gas injection, filling and cork cappingCompatible formats: Burgundy bottles in 0.375L and 0.75L; Bordeaux bottles in 0.5L, 0.75L and 1.5LContainer material: glassIncluded: a standalone double cartridge filtration group, two 316L stainless steel housings, three 30-inch fil ...

Optima complete production and packaging line for ELISA test kits, comprising the Optima MEDICON ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA kits; operating principle and process steps: 1. Feeding and preparation: Microtitre plates are automatically retrieved from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate (dispensing volume 0–500 µl per well, dispensing rate 0–30,000 µl/s per well), followed by automatic level verification (Level Verification Ultrasonic V2 Y with 8-channel ultrasonic sensor). 5. 2 (two) long-term incubators with a to ...

Tube Filling & Sealing Machine (Plastic) Manufacturer: SpeMaBa/Gustav Obermeyer Type: TUFÜBA 40 PE Year of Make: 2006 • For plastic tubes (HDPL, LLDPL) • Welding by hot air • 9 tube holder stations • Capacity max. 40 tubes/min • For tube Ø 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosage 20-220 ml depending on the dosing pump • 1 rotary vane dosing pump 10-100 ml (1 additional as a replacement) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling unit • Print mark control (alignment of the tube to the printed image) • Embossing 1-line • 2 tube holder format sets: tube Ø 25 mm, tube length 90 mm, tube Ø 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labeling machine 05-0179

used aseptic filling line SIG-COMBIBLOC, Type CFA 310-32, built in 2004. Capacity: 10,000 E/h Packaging type: C3, (1ltr. slim) Included: - Automatic unpacker and feeding of blanks - Closure applicator - Tray packer - Vertical buffer - Various conveyors - Control cabinets, etc. Dismantling by the buyer Location: EU country

Used TREPKO type 233KSP Filling monoblock - Year 2015Technical Specifications & Performance DataThe Trepko Type 233KSP filling triblock/monoblock is industrial filling and capping equipment for continuous gravimetric dosing of food, personal-care, household and industrial liquid products. Manufactured in 2015, this machine combines filling and plastic cap application within a compact production system designed for accurate container handling.Manufacturer: TrepkoModel: Type 233KSPProduction capacity: up to 7,200 containers/hourOperating rate: 40 cycles/minFilling system: gravimetric fillingFilling valves: 3Filling nozzles: 3Container format range: 100 g to 500 g, adaptable through format changeoversDimensions: 3.3 m length, 2.0 m width, 3.3 m heightWeight: 2,500 kgAdvanced Automation & Control SystemsThe monoblock is equipped with an Allen Bradley CompactLogix 1769-L30ERM PLC and a Pro-Fa ...

Krohne dosing system for smaller bulk containers 5-100 litres equipped with Krohne Oprtiflux 6300 and Burkert 3003 fluid control system. Mounted on trolley 600x1200x1000(height)

Krohne Volumetric automated filling machine for filling quantities starting from 50ml up to unlimited quantities, equipped with flow control Krohne Batchflux 5015B/C and Pump NETZSCH NEMO NM021BY04S24B 2008A 160-820RPM, 0,2-1,2m3/h; Nord Engine type SK 01F 90L / TF 4; Sizes: 1420x750x1350mm(height)

Automated Vial Filling & Liquid Handling System (Ex-Novartis) with original software and user manual, includes original pre-loaded control PC, This system is built around a heavy-duty, high presision Cartesian XYZ gantry driven by NEMA 34 Square Stepper Motor. Sizes 1180x1000x1800mm, New 2015

Filling and sealing machine for pre-filled syringes Manufacturer: Rota Type: RSM 05 Year of manufacture: 2018 Exhibition machine Incl. 12 months warranty and FAT at the manufacturer's factory Test run and inspection possible by arrangement at the manufacturer's plant. Option: In addition to pre-filled syringes, cartridges can also be processed on this machine. This requires additional format parts as well as the mechanical and electrical retrofitting of an additional station. Download Layout: 04-J010_Layout Download Technical Overview: 04-J010_RSM05_Technical_Overview Download Technical Data: 04-J010_RSM05_Technical_Data_01.06.2026 Subject to technical changes

Used Linker 36-36-12 filling monoblockTechnical Specifications & Performance DataThe Linker 36-36-12 filling and capping monoblock is an industrial packaging machine designed for volumetric filling and plastic screw-cap application. Manufactured in 2002, this unit combines filling and capping functions in one compact bottling equipment platform for efficient beverage production and low-viscosity liquid handling.Production speed: 140 units/min based on 500 cc presentations (8.400 units/hour based on 500ml) Filling valves: 36Capping heads: 12Compatible formats: 0.25L to 1.0L, with format changeovers for additional presentationsContainer handling: PET, PP and HDPE containers with plastic capsDimensions: 6000 mm length, 6000 mm width and 3600 mm heightWeight: 3500 kgAdvanced Automation & Control SystemsThe monoblock is equipped with an Allen-Bradley MicroLogix 1500 PLC and an Allen-Bradley P ...

Filling line for cream Manufacturer: Kugler Type K 54 R Masch.-Nr. 12943 Consisting of: 1x rotary table 1x Kugler filling machine, type K 54 R single-digit, built in 1983 with transport pin belt and sealing device Hopper for lids including feed and support, currently designed for filling into cans Lid Screwdriver Inkjet printer EBS 6000 Tightening Banding, Fabr. Pester Pewo Pack Type 450 SN including shrink tunnel Film width 30-450 mm Film thickness 0.02-0.1 mm Roll diameter max. 300 mm Film type: PE

Used Tetra Pak TBA 19 200ML Slim Filling machineTechnical Specifications & Performance DataThis used bottling line is built around a Tetra Pak TBA 19 V10 filling machine for 200 ml Slim carton formats. Designed for dairy product processing, the line provides an integrated solution for filling, straw application, secondary packaging and product conveying in an industrial packaging environment.Filling machine: Tetra Pak TBA 19 V10Container format: 200 ml Slim Tetra Brik cartonProduct application: dairy productsYear of manufacture: approximately 1996Running hours: approximately 26,000 hoursConveyor system: approximately 30 meters, including 4 x 90° curves and 2 x chain tensionersAdvanced Automation & Control SystemsThe line combines dedicated filling and packaging equipment into a coordinated production arrangement. Its conveyor system supports the controlled transfer of individual cartons ...

Filler blocks from CIMEC Italy consist of rinser, filler and capper. Output 1000 bottles per hour. Loading and dispensing by hand on collection plate

Filling range 20-1000 mL, capacity up to 40 bottles/min. Complete set including filling machine and labelling machine. Please contact Aisyah: 019 383 9291 Item under: F1BHC Located at: F14

3x Filling machine: TBA 8 Base 750B Capacity: 6000 TP/h YOM: 1996 Working/h: about 30,000 hours 3x Packer: TCP 70 YOM: 1996 Condition: Used Availability: from now on

2x Tetra Pak Filling lines 1x Filling machine: TBA 8 Base 500B Capacity: 6000 TP/h YOM: 1996 Working/h: about 30,000 hours 1x Packer: TCP 70 YOM: 1998 1x Filling machine: TBA 8 Base 1000B Capacity: 6000 TP/h YOM: 1996 Working/h: about 15,000 hours 1x Packer: TCP 70 YOM: 1998 1x Accmulator:Tetra Helix 21 YOM: 2002 Condition: Used Availability: from now on

Homogeniser for oat milk, Additional title: High pressure pump , Performance: 5500 l/h, Max. pressure: 200 bar, Power: 45 kW, Length: 1050 mm, Width: 1600 mm, Height: 1400 mm, Weight: 2500 kg

Filling Machine Manufacturer: Würschum Type VH 150 Volume Minimum 3 ml Maximum 150 ml Manual filling machine for pastes and creams

Bottling line, consisting of: 1. Depalletizer and Palletizer Manufacturer: Pack und Palettiertechnik Rudolf Steinle Gersthofen GmbH Type: RAPID-EK Year of Make: 1993 Air pressure: 6 bar Connection: 220/380 V, 50 Hz Control: 24 V DC 2. Unpacker Manufacturer: Radenska & Steinle (RS) Type: ARO-P3 Year of Make: 1995 Air pressure: 6 bar Connection: 380 V, 50 Hz Power: 3 kW 3. Crate washer Manufacturer: Radenska & Steinle (RS) Type: SPN-2S Year of Make: 1995 Connection: 380 V, 50 Hz Power: 8 kW 4. Bottle washing machine Manufacturer: Schymanski GmbH (MAG) Type: SIRIO 8-24 Year of construction 2000 Connection: 400 V, 50 Hz 5. Bottle inspector Manufacturer: miho Inspektionsysteme GmbH Type: DAVID Year of Make: 2002 Connection: 230 V, 50-60 Hz 6. Bottle filling line Bottle filler Manufacturer: KHS Type: VVF Bottle capping system Manuf ...

Multihead weigher with automatic packaging machine. The plant is in mint condition. Viewing: by arrangement Material: Stainless Steel Bag length: 450 - 800 mm Bag width: 150 - 300 mm Weight of packing machine: 800 kg Packing speed: 30 - 70 bags/min Control: Siemens Smart Line Electr. Total power: 2.2 kW Total weight: 1,300 kg Disassembly: by buyer or on request

Connected load: 400 V Refrigerant: 95g / R134a Compressed air supply: 5-8 bar Printer: Star DP8340S Auction-ID: A1-50529-11

Excellent quality and condition. Fully automated and programmable. Can fill from 3 to 20 litres. Can extract air and introduce gases on filling completion. Bag and litre counting.Very fast filling, filler tank float switch cut off. 3 phase. Runs with an air compressor that could be included, maintenance spares, seals etc included.

Riggs 1000 Series Depositer A fantastic opportunity to purchase a high-quality Riggs 1000 Series Depositer in excellent working order. Ideal for food and beverage manufacturers looking for a robust, accurate and dependable depositing/filling machine. Specification Riggs 1000 Series Depositer Manufactured in 2010 40-litre stainless steel hopper included Heat-resistant reinforced product feed hose included Fill range: 25ml to 400ml Excellent operating condition Very well maintained Ready to go straight into production

Used Tetra Pak A3 flex 500-1000ml SQ 300V Filling lineTechnical Specifications & Performance DataThe Tetra Pak A3/Flex 300V is a used bottling line filling machine designed for aseptic carton packaging applications. Built for industrial packaging and beverage production, this filling machine forms, sterilizes and fills carton packs in an integrated production process. Capacity reaches 8,000 p/h for package sizes below 330 ml, 7,000 p/h for sizes above 330 ml, 5,500 p/h for packages above 1,500 ml, and 5,000 p/h for 1,890/2,000 ml packages.Manufacturer: Tetra PakModel: A3/Flex 300VMachin working hour: 16.566 HoursMaximum output: 8,000 p/hElectrical supply: 400/230 V ±10%Frequency: 50/60 Hz ±2%Recommended main fuse: 100 A, or 160 A with DIMC FlexMachine body height: 3,621 mmStandard width: 7,225 mmPT Flex length: 8,327 mmAdvanced Automation & Control SystemsThis Tetra Pak filling machine ...

KHS, Krones and Hormes are leading manufacturers and suppliers of bottling systems and machines for the beverage and liquid food industries. Bottle filler Manufacturer: KHS Type: VVF The KHS bottle filling system, type VVF (often referred to as Delta VVF or KHS/SEN VVF) is a classic, mechanically controlled back-pressure filling system that has been specially developed for filling beverages containing CO2 into glass or PET bottles Bottle capping system Manufacturer: Hormes Type: KK/SV (crown cork / screw cap combination) The machine combines two different capping technologies in a very small space. It can flexibly close bottles (mostly glass bottles) either with crown corks (for beer, lemonades) or with screw caps (for juice, wine, mineral water). Rotary Labeling Machine Manufacturer: Krones Type: Prontomatic Year of Make: 1997 Connection: 400 V, 50 Hz, 3Ph Cont ...

Product data: Mobile Diesel Filling Station / Fuel Tank Capacity: approx. 240 litres Tank made of robust PE plastic 220V Electric Transfer Pump Connection via Schuko plug Automatic nozzle Fuel hose: approx. 4 m Filling opening with closure Large protective lid Integrated hose and pump holder Pump speed: up to 4,500 rpm Suction height: up to 5 m Lifting height: up to 10 m Rated current pump: 0.8 A CE marking on the pump Instruction manual available Scope of delivery see pictures Scope of delivery: 1x 240 litre tank 1x 220 V feed pump 1x automatic nozzle 1x fuel hose 1x Instruction manual Note on the pictures: The pictures shown are sample pictures from our collection . You will receive an identical copy from the existing stock . Slight visual deviations or storage traces are therefore possible. Further auction: The diesel fill ...

2x Mobile Diesel Filling Station 240 L – 220V Pump – as good as new Offer includes 2 complete tank systems. Product data per tank: Capacity: approx. 240 litres Total volume: approx. 480 litres (2x 240 litres) Robust PE plastic tank 220V Electric Transfer Pump Connection via Schuko plug Automatic nozzle Fuel hose: approx. 4 m Filling opening with closure Large protective lid Integrated hose and pump holder Pump speed: up to 4,500 rpm Suction height: up to 5 m Lifting height: up to 10 m Rated current pump: 0.8 A CE marking on the pump Instruction manual available Scope of delivery total: 2x 240 litre tank 2x 220 V feed pump 2x automatic nozzle 2x fuel hose Operating documents Note on the pictures: The pictures shown are sample pictures from our collection . You will receive 2 identical copies from the existing stock . Slight  ...

Used PROCOMAC RM 36-42-6 filling monoblock, flat liquids 9000 BPHTechnical Specifications & Performance DataThe PROCOMAC FILLSTAR BLOCK is a filling monoblock designed for integrated rinsing, filling and capping of still products in PET bottles. Built in 2002, the PET HAL 36/42/6 configuration combines a PROCOMAC GRIPSTAR rinser, HAL SF filler and AROL PK capper in a compact rotary bottling unit for beverage production and industrial packaging applications.Manufacturer: PROCOMACModel: PET HAL 36/42/6Configuration: rinser, filler and capper monoblockMaximum production speed: 9,000 bph on 0.5L bottlesRinser: PROCOMAC GRIPSTAR with 36 grippers and 1 treatmentFiller: HAL SF with 42 filling valves for still liquidsCapper: AROL PK with 6 heads for PCO 1881 capsCurrent bottle formats: 0.5L, 1.5L and 2.0LBottle neck diameters: 66 mm, 89 mm and 95 mmList of overhaul / revision works - Overhaul of ...

Used GAI 5003A filling triblock 5000 BPH, still wineTechnical Specifications & Performance DataThe GAI 5003A is a filling monoblock designed for still wine bottling operations. Manufactured in 2000, this rotary bottling machine combines bottle rinsing, vacuum filling and corking functions in one integrated unit for efficient glass bottle handling.Manufacturer: GAIModel: 5003AYear: 2000Production capacity: 4,500–5,000 bottles per hourFilling system: Vacuum fillingRinser: 20 grippers with water and air treatmentRotary filler: 20 filling valvesCorking unit: 4 headsConstruction: 304 stainless steelSanitization: Water at 90°CThe machine is suitable for standard wine bottle formats, including Burgundy and Bordeaux-style bottles. Available bottle formats include 3/8 bottle and 750 ml Burgundy and Bordeaux bottles.Advanced Automation & Control SystemsThe GAI 5003A filling monoblock is equippe ...

Case dimensions: 1025 wide, 852 long, 625 high. With rema 160A plug Auction-ID: A3-46133-585

Equipped with control box, approximately 10 meters of 'Polychain' supply conveyor, 2 meters of drainage conveyor, Without supply/drainage pipes/landing stairs (eea on instructions comfort district staff), including 1x pallet with various parts. Capacity 10000/hour Auction-ID: A1-50393-17

Equipped with a decommissioned 8 cup cork insertion device, including approximately 10 meters of 'Poly chain' supply line (yom '96), 4 meters of 'Poly chain' discharge line, 1x pallet with parts, Without supply/discharge pipes/landing stairs (eea on instructions comfort district staff), capacity max 6000 bottles/hour. Auction-ID: A1-50393-1

Application: Automatic packaging of: potatoes / onions / carrots / other fruit and vegetable products Works with roll stock PE film, where the bag is automatically shaped, filled and sealed. This type of machine is widely used in potato and onion packing lines. Version: Rollstock film holder / Automatic bag formation / Throughput conveyor belt / Sealing unit / Pneumatic operation / Siemens LOGO! PLC control / Omron VS Mini J7 frequency converter / stainless steel/product contact parts / CE version Suitable for coupling with weigher or dosing unit technical data: Capacity: approx. 10–25 bags/minute (depending on product and weight) Bag weights: about 2.5–25 kg Power supply: 400 V Compressed air: 6–8 bar Power: approximately 4–6 kW Auction-ID: A1-47393-271

Equipped with: vibrating motor, knife for big bag cutting, attachment for dust catching, funnel valve, standing platform, air cylinders for doors Auction-ID: A1-47393-210

IN-CAP – Automatic capsule filling machine Automatic IN-CAP machine designed for dosing and filling powders or granules into capsules. This equipment automates capsule filling and packaging operations. In particular, it can be adapted to pharmaceutical, nutraceutical or cosmetic production environments, depending on its configuration and use. Features: Brand: IN-CAP Type: Automatic capsule filling machine Products: powders or granules Application: dosing and filling of capsules Use: industrial and professional Dimensions (L x W x H): 90 x 72 x 170 cm Weight: 176 kg Equipment sold as is. Auction-ID: A1-50714-4081

Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement.

Vipoll GEA rinsing, filling, and capping machine to process beer, soft drinks, wine, and water in glass or PET bottles, type: Visipraktik VKR-E 8-8-3k, output: 3000-4000 bottles per hour: Key Functionalities and Technical Details: • ALL-IN-ONE System: Handles different bottle formats with tool-free changeover, allowing for quick, manual, or automatic adjustments (10â€20 minute changeover time by 1-2 operators). • Double Pre-evacuation: The filling process includes double pre-evacuation (vacuum) to ensure low oxygen pickup, which is essential for beer quality. • Versatile Capping: Configured to handle Crown Corks, ROPP (aluminium screw caps), or Plastic screw caps depending on the specific turret configuration. • Compact Design: The machine is delivered as a single block (monoblock), making installation faster and reducing the footprint. • Operational Cont ...

Handtmann vacuum filling machine with linking attachment, type: VF 608, serial number: 37275, year of construction: 2016, 400 V, 3 Ph, 50 Hz, 4.3 A, 3 kW, Busch vacuum pump, type: KC 0016 E 3Z0, serial number: D15442409, year of construction: 2016, capacity: 19 m³ per hour, linking attachment, type: 410/16001852, year of construction: 2012, dimensions: 850 mm x 900 mm x 1800 mm. Technical inspection in August 2026 by Kalteks.

Manufacturer: WALDNER Type: DOSOMAT 2/2 Year of Make: 1993 Modernization: 2022 Electrical optimization: - Renewal of the cam switchgear - New cam switchgear from Lenord and Bauer including wiring harness and connectors - New adapter cable for the cam switchgear - Temperature regulator for sealing heating Mechanical repair: - Renewal of various sprockets - Replacement of DU sockets and thrust washers - Renewal of a pneumatic cylinder - Replacement of a joint rod end Capacity: approx. 4,800 cups/hour Format 1: Round cup Ø 95 mm (format set new from 2024, never used): - Filling weight: 200-500g - 2-lane processing - Automatic cup delamination - Closure by heat sealing with aluminum plates Format 2: Rectangular cup for quark / curd cheese - Rectangular plastic cup with rounded corners - Nominal filling weight 200 g - upper outer dimensions approx. 110.6 ...

TECHNIPLAST professional machine for the automatic filling and packaging of pots, particularly suitable for agri-food products such as yogurts, dessert creams, dairy preparations, sauces and other semi-liquid products. The machine works with an indexed turntable ensuring the movement of the pots between the different production stages. It is equipped with a magazine with automatic destacking system for the pots, a large stainless steel hopper, as well as a pneumatic dosing and filling system. The set also includes several cylinders and sensors, an output conveyor and a control panel for controlling the various functions. Components from well-known brands, including SICK for some sensors and Danfoss VLT for the inverter. Mainly stainless steel construction, suitable for the food environment. The work area is protected by transparent casings with secure access. The machine is accom ...

Gas supply: natural gas from the public gas network, gas treatment: drying using a molecular sieve, max. refueling pressure: 300bar(g), natural gas compressor station capacity: 630m³, storage type: SP28, storage pressure: 300bar(g), inlet pressure: 2.5-700mbar(g), storage type: SP28, storage volume: 2.24m³, storage pressure: ≤300bar(g), compressed air/gas supply (Pₛ,in/Pₛ,out,EGT): 1bar(g)/300bar(g), temperature range: -10 to 50°C/-10 to 60°C, volume flow rate: 74-113Nm³/h, power consumption: 36kW, noise level: 65dB(A) at a distance of 1m, length: 4,850mm, width: 2,690mm, height: 3,100mm, weight: approx. 30t, including documentation.

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980