bottle filler used for sale

Manufacturer: Krones Model: Linatronic M, K735E02 Type of machine:empty bottle inspector Year of manufacture: 2015 Rated voltage: 400 / 230 V Current type and system: AC 3/N/PE Mains frequency: 50 Hz Full load current Ib max: 6 A Short-circuit strength: Icw 0.46 kA/1s Mains disconnecting device: Icw 0.46 kA/1s Backup fuse: 20 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Krones Model / Type: Linatronic 735 M2 Type of Machine: Empty bottle inspector Year of Manufacture: 2007 CAPACITY - Capacity: 39,600 bottles per hour ADDITIONAL EQUIPMENT - Glideliner, Akkutable, and some conveyor belts may be available Find more here - .ucymachines/ Contact us at - sales@ucymachines

Left to Right uwemetzlerdingslebener.de 03687328415

Overview The bottle washer Sirio 7 from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar

Bottle washing machine Klinger Capacity: approx. 3.000 bph Year of manufacturing: 2020 Bottles: up to 1,0 ltr. wide mouth bottles The machine will be heated by steam incl. label removal system Machine condition: like new

Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel

consisting of:  - Depalletiser, KETTNER, year 2000, 15000 bph, - Rinser with air, Alwid, year 1999, 7500 bph, - Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour - Labeller, Krones Variomatic, year 2001, 8000 bottles/hour - Carton erector, KETTNER, year 2001, 20 cartons/min. - Packer, KETTNER, year 2001, 7000 bottles/hour Details: - Control Siemens S7 - different format sets available, - for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm - annual maintenance by Krones technicians - very good condition

Posimat Access Series N-37 Bottle Unscrambler (2014) Auction-ID: A1-48805-58

Empty bottle inspector for checking the side walls and mouth, as well as for residual liquid and metallic foreign objects. The bottle height is inspected before the bottle reaches the inspector, and non-conforming bottles are rejected., Additional title: Inspection of glass bottles prior to filling, Capacity filling line: 44000 bo/h capacity at the filler, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position: in floor-standing housing on feet, Features: height inspection; bottle transport; housing; control panel

A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet., Additional title: single-ended machine for cleaning glass bottles, Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h, Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs., Processing time: 14,14 min, Heating / Cooling: 1.352.712 kJ/h, Water: 7,92 m³/h, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position: in a cabinet on legs wi ...

For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Technical data: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Univar 10 automatic moulding machine for profiling and milling windows and doors, individual components and similar items with circumferential profiles, including a mechanism for single-person operation Units: Technical data: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Condition: Gebraucht Location: Tauberbischofsheim, Germany

On behalf of our client, we are selling this SIG Asbofill ABF (Aseptic Bottle Filler), 10-Lane, PET bottle filling machine which is designed for the aseptic filling of liquid, non-carbonated, microbiologically sensitive high- and low acid products into prefabricated plastic bottles. The client bought a new and bigger aseptic filling machine for extension of his production capacities. This machine is recently dismantled and located in the warehouse of the dairy factory., The machine was used the last 8 years to fill protein shakes and milk related drinks (cold fill) at the current factory. Before it was used for fruit juices. Sterility Assurance Level (SAL) of 6-log reduction. Shell of life of the current products: 9 months. Capacity: 12.000 bottles/h @ 1.000 ml, 10.000 bottles/h @ till 1.500 ml and 8.000 bottles/h @ till 2.000 ml. Filling accurancy: ± 2 ml (filling volume 1.000 ml). Bot ...

Used R. BARDI nilo 2-20R bottle washer 20000 BPHTechnical Specifications & Performance DataThe R. Bardi Nilo 2-20R is a linear bottle washer designed for returnable glass bottle handling in bottling and industrial packaging operations. Manufactured in 2002, this machine is engineered to support high-throughput washing processes within a used bottling line, combining bottle cleaning performance with format flexibility.Manufacturer: R. BardiModel: Nilo 2-20RYear of manufacture: 2002Maximum output: up to 20,000 bottles/hourConfiguration: LinearOperating pressure: 6 barCompatible formats: 0.25L, 0.33L, 0.5L and 0.75L bottles, plus other formatsContainer material: GlassAdvanced Automation & Control SystemsThis bottle washing machine is intended for continuous industrial operation, with a linear layout that supports controlled bottle transport through the washing process. Its design is suitabl ...

Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data Year of manufacture: mainly 2013 Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L Application: filling and packaging of non-returnable glass bottles Filling syst ...

This bottle distribution and sleeve-wrapping production line includes the following equipment: Machine 1: Bottle Distributor - Manufacturer: BCM - Model / Type: 1750-020 - Year of manufacture: 2002 - Speed: 200 bottles per minute - Number of channels: 16 - Width of the channels: 110 - Mini format: 50 x 25 x 100 mm - Maxi format: 100 x 50 x 250 mm - Electrical connection: 3 x 400 V N+T - Installed power: 50 Hz, 10 KVA, 20A - Pneumatic functioning pressure: 6 to 8 Bars - Pneumatic connecting section: diameter 9 - Pneumatic consumption: 120 L per minute Machine 2: Sleeve Wrapping Machine - Manufacturer: Sleeve Technology - Model / Type: HSSA1500 + HA - Year of manufacture: 2020 - Function: device designed for applying foil sleeve wraps to products - Speed: 50 pieces per minute - Current capacity: 50 ml bottles - Machine number: 1907085 - Voltage: 3 x 400V + N + PE - Frequency: 50Hz - Po ...

Packed per 12 a box, on and including 1 pallet Auction-ID: A1-48959-729

Fully automatic can holder/bottle display from Tölke incl. feeder. Perfectly functional, used in a production until recently. The can display is sold solely because the product has been replaced. 60 pcs/min Adjustable to different formats, currently set to 400 ml round cans. Can also be used for bottles and other cans of any kind The machine can be visited.

On and including 2x pallet Auction-ID: A1-48959-734

Consisting of 20x Sanisure 5ltr Pharmatainer assembly and 5x Sanisure 20ltr mixed4sure bottle, including 1x Corning disposable spinner flask, on and including 2x pallet. Auction-ID: A1-48959-727

Tester for the detection of particles in infusion bottles; two polarizing filters and magnifying glass; for brown bottles with cold light. Cold light source with Included in delivery, light guide missing. Dimensions 600×400×380 mm; Weight 24 kg; Field of view Ø 250 mm; Magnifying glass Ø 300 mm; 230/115 V, 50–60 Hz; 3 fluorescent lamps; 2 m cable. Auction-ID: A7-49816-163

Testing device for the detection of particles in infusion bottles; two polarizing filters and magnifying glass; for brown bottles with cold light. Cold light source with Included in delivery, light guide missing. Field of view 250 mm; 3 fluorescent lamps; 230 V, 50 Hz, 0.5 A; Power consumption 24 W; 2 m cable, switch, Schuko plug. Auction-ID: A7-49816-162

automatic two-side (front&back) labelling machine, PMR operation system OP3000, newer used, new 2022

Bottle formats: diameter approx. 20–40 mm, height approx. 45–70 mm, depending on the format set Capacity approx. 6000 bottles/h With format set for round bottle Ø 24 mm x length 52 mm Feeding hopper with lifting device Alignment for the correct positioning of the bottle on the conveyor belt (e.g. filling machine) 240V/50 Hz

Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts

Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data Manufacturer: K ...

EXPIRES APRIL 2022 Auction-ID: A1-50069-244

EXPIRES APRIL 2022 Auction-ID: A1-50069-259

Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data Manufacturer: KHS Model: ...

EXPIRES APRIL 2022 Auction-ID: A1-50069-258

EXPIRES APRIL 2022 Auction-ID: A1-50069-261

EXPIRES APRIL 2022 Auction-ID: A1-50069-260

Beer filler with KK

Pastry filler / doughnut filler with 1 plunger NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries5 liter bowl with lid made of stainless steel Details see picture

Pastry Filler / Berlin Filler with 2 Pistons NEW! Pastry filler / doughnut filler with 2 plungers for filling doughnuts or pastries7 liter bowl with lid made of stainless steel Details see picture

Pastry filler / doughnut filler with 1 plunger NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries5 liter bowl with lid made of stainless steel Details see picture

Year: 1989 Type: Monoblok VKVCF 72/12 Bottle type: 0,5l glass Efficiency: 28500 b/h Operation mode: pressure Technical data: -72 filling valves -12 crowning heads -double evacuation -vaccum pump

Producer: Handtmann Type: VF 50/80 Output: 4 kW Weight: 450 kg Dimensions: Width 525 x length 844 x height 1600 mm Connection: 400V/50 Hz Vacuum filler HANDTMANN typ VF 50/80 - Without loading - MC control - Serving setting from 5 g to 1000 g - Filling pressure up to 55 bar - Portion and turn up to 420 portions / minute - Without calibration gear and without intestinal clamp - Capacity up to 2.600 kg / h - Funnel 80 L Portioning speed: 25 g = 420 portions / minute 50 g = 350 portions / minute 100 g = 250 portions / minute 200 g = 160 portions / minute Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Manufacturer: Nagema . fountain pen Varifill 110/15 regulation: Glass. construction year: In 1995 Type: Monoblok 110/15 technical data: To -110 filling valves to-15-figure Kronenkorker - run direction: left on the right -Doppel-Evakuierung control: Siemens S5

Handtmann VF 80 vacuum filling machine, filling, portioning, linking. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.

Piston filler with 10 filling points for filling viscous/viscous products in glasses or bottles with bottle mouths from 28 to 38mm Up to a maximum of 0.75ltr

Delivery time: 2 weeks Length: 350 mm Width: 470mm Height: 480 mm Capacity: 8 litres Weight: 20 kg Kw: 0.1 Operating instructions: german Description Pastry filler of manufacturer IZO is an electrical machine for dosing and injection of cream and jam. The machine is designed for professional use in bakeries and pastry shops. -Digital Control Panel - cooler - automatic time dosage

New BIG BAG filling station The device is available immediately from stock. Technical data: Weight: 160 kg Dimensions: 1400 x 1640 x 1960 mm (L x W x H) Maximum dimensions of the big bag's: 1000 x 1400 x 1500 mm (L x W x H) Technical data sheet, see the images on offer. At smaller big bag can be inter's pallets.

New BIG BAG filling station The device is available immediately from stock. Technical data: -Weight: 320 kg -up to 1.5 qbm big bags can be used. -Foldable feet -With EXTRA large funnel to the trucks/excavators filling -Dimensions: 1520 x 1640 (L x W) mm Retracted height feet: 2560 mm Extended height feet: 3060 mm -Hopper opening: 1400 x 1100 mm Technical data sheet, see the images on offer.

Suction register: Make : Wolf Built: 2004 Dimensions: 3500 x 1500 x 650 mm and 2500 x 1500 x 650 mm (approx. LxHxD) only 4 pieces left in stock In addition, we offer: Exhaust air unit with exhaust air pipe and deflector hood depending on size. Rectangular sewer pipes 1200 x 600 mm, unit price € 50,- net from location. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Rated power l/h 350 l/h Laenge 600 mm width 500 mm Height 1600 mm weight 30 kg material 1.4301 / AISI 304 ; New machine - best condition

Rated power l/h 550 l/h Laenge 900 mm width 500 mm Height 1700 mm weight 40 kg material 1.4301 / AISI 304 ; New machine - best condition