bottle cap line used for sale

Available in stock 1 x Used Capstone ECM Control Board (P/N 512300-030). Most commonly used for Microturbines C60. Please note that this is an used and damaged board, buy it only if you wish to use it for parts or to refurbish. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 5 x Used Capstone Display Panels. Most commonly used for Microturbines C60 and C30. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone IGBT LCM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone IGBT ECM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x NEVER USED Capstone Igniter (P/N 516853-001). The equipment was NEVER USED and it is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone Digital Power Controller (DPC Board). The unit is complete. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Standard Equipment's Chrome Coated Cylinder Boiled Steel Body Pressure indicator Pressure Adjustment User guide 2 Years Warranty CE

Impeller D.477 with ceramic paint YYKM250RNA/75/CS-5 1-Y400741 for CAPRARI PUMP KCM250TA+180042N1/SF – 496930/2 8211805 - 2 pcs

Saugdepanner, Fabr. Capelleveen, Type CAPGRIP CAD

USED TETRA PAK CAP APPLICATOR 30 FLEX FOR SALE Item #: Usm-179 Category Cap Applicator One Used Tetra Pak Cap Applicator 30 Flex For Sale: Flexible cap applicator for portion and family packages of aseptic brick pack product Output: 6600 - 9000 packages per hour Package volume: 200 - 2000 milliliters Package types: Tetra Gemina® Aseptic, Tetra Brik® Aseptic, Tetra Prisma® Aseptic (different package types and sizes may require OEM change parts) Allen-Bradley Logix5561 controls Nordson hot melt glue unit Stainless steel construction Touch screen HMI Servo driven Electrical Information 400/230 Voltage 3 Phase 60 Hertz

approx. 9 pieces of professional espresso coffee machines, LaMacatec, Capri II Black – New - : Price from location: only 1.500.-€ (net)! Manufacturer: LaMacatec Type: Capri II Black Art. Item No.: LM 721 black Year of manufacture: 2021 – but are still in their original packaging! Groups: 2 Power: 3050 Watt, 230V, Boiler water: 11.5 liters Dimensions (WxHxD): 66x48x54cm Steam: 1 Hot: 1 Weight: 48kg Automatic coffee outlet via quantity programming Steel Body Low drip tray for "coffee-to-go" Stainless Steel Steam and Water Lance Thermosiphon System Water Circuit Copper boiler (Cu 99.5) with anti-oxidation treatment Former new price in 2021: 3.400.-€, current price: 4.119.-€ Condition: New goods orig. packaging Available: immediately Location: 88448 Attenweiler

Fuji Capsula XL II CR System incl. PC / Monitor / Keyboard / CD / manuals tested from technican #Welcome to inspect & test # EXW Germany

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

Cap Maschine

Used Used labeller Capsuler GAI 6030: Year: 2004 Condition: As Is Year: 2004 Speed: 2.500 bph Direction: Clockwise Model: 6030 Nr. 3 adhesive stations Suitable for pvc and polylaminate capsules Formats: 0.75 lt series xv glass special, 0.75 lt Safety protections Code: EA 454 More details: https://bottlingscout.com

Key data: 4200 kN

Machine in production !1

AUTOMATIC twin table SLOT MORTISER machine model BALESTRINI 2CAP second hand machine max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.13 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9000 net weigth kgs. 600 volt. 380/50

Manufacturer: Unimac-Gherri Series: Tappatore Mod. Cap. 4-Plastic Year: 2010 Capacity: 10,000 b/hr Formats:current 850ml Specifications: - Voltage 400 V - Frequency 50/60 Hz - Nominal power: 4 kW

Fully automatic capsule filling machine for powder or pellets in capsules of size 000 - 5. Along with the main machine, various additional modules and machine enable a fully automatic filling process. Included: material hopper, capsule hopper, vacuum feeder, capsule feeder, industrial dust collector, capsule polisher, metal detector, collecting hopper (final product). ? Specifications: suitable for capsule size: 000 - 5 | segment bores: 25 | max. speed of the machine in neutral: 140 cycles/minute (corresponding up to 3500 capsules/minute) | main machine dimensions: L1555xW1165xH2040 mm | main machine weight: 2200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks ...

Sample system for filling liquids into bottles, closing them with a twist-off cap and then bottles labelling. Complete system consisting of: Bottle unscrambler | Filling machine with 4 filling heads for liquids with high or low viscosity | Lid closing machine for different sizes and shapes of lids including lid unscrambler | Labelling machine for bottles/cans/containers made of glass or plastic | Collecting table. The individual machines of the packaging line are connected to each other via conveyor belts, which gives the installation of the line high flexibility. -Specifications: Number of filling nozzles: 4 | filling range: 100-1000ml | dosing method: by piston pump | accuracy: +/- 1% | bottle height: 15-400mm | bottle diameter: 25-200mm | speed: max. 1000 bottles/hour | label size: L25-300mm, W20-180mm, product contact parts are made from 304 stainless steel. Dimensions and total weig ...

LABELshrink tunnel. Basic version with conveyor for smoothly shrinked labels on caps only. For bottles/cans/glasses without any corrugation. Two blowing motors for low and turbo air blowing. - Specificationen: max. product size: ? 120xH400mm | tunnel size: L1000xW150xH400mm | machine dimensions: L1530xW400xH1300mm | output: up to 200 bottles/min | power: 380V, 9.0kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

The TRE PAK DIM Cap Applicator is a specialized piece of equipment used in the packaging industry for applying caps to various types of containers. Here are some of its key functions and features:, - Automated Cap Application: The DIM Cap Applicator automates the capping process, ensuring that caps are applied quickly and uniformly across a production line. This reduces labor costs and increases efficiency., - Versatility: This machine can handle a variety of cap styles and container shapes, making it suitable for different product lines in food, beverage, pharmaceutical, and cosmetic industries., - Precision Control: The applicator is designed to apply caps with accurate torque settings, which ensures that caps are not over-tightened (which can lead to damage) or under-tightened (which can result in leaks)., - Integration Capability: The DIM Cap Applicator can be seamlessly integrated i ...

Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this forma ...

Clamping Force: 420 ton // Shot Weight (Max): 1555 g

General SKU300U1003 LocationBarneveld CEcheck MakeCI Electronics Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel General Type195/36 Sade P2 No.TP595 Floorspace0,80x0,65 m Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Powdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDetergent & surf.SugarOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicMiscellaneous transportCI ElectronicsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Food & Feed > StarchIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Plasti ...

General SKU406S975 MakeIndosa Maschinenbau AG (CH) LocationBarneveld CEcheck TypeV131 Main Features Motor0.55 KW Inlet diameter80 mm Number of1 heads Specified Features - Capper Single headcheck Suitable fortins Number of closing heads:1 With motor0.55 kW 220/380 volt Pneumatic operatedcheck CapacityDepends on the product Suitable for bottle/jar dia.60-131 mm Suitable for bottle/jar height25-230 mm MaterialStainless steel With jacketcheck General No.16.566 Year of construction2006 With switchcheck Floorspace1x1,2M Total height1,8M Weight300 KgOils & fatGeneric medicinesOintmentsTea, herbs & coffeeBiotechnologyAgrochemicalsSpicesOther pharmaceuticsCosmeticsLubricants & oleoDairySolid pharmaceuticsBeveragesBiopharmaceuticalAPIMinerals & inorganicCappersIndosaIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmace ...

General SKU008A066 MakePohl GmbH &: Co. KG TypeE No.0003 Year of constructionunknown LocationBarneveld Main Features Motor0.075 KW Number of1 heads Specified Features - Capper Capper:Flanging machine: (1x) Single headcheck Suitable for(various size parts) Number of closing heads:1 With motor0,075 KW, 220 Volt (1 Ph) With variable speed drivecheck General With switchcheck Floorspace0,6x0,5 M Total height0,9 M Weight90 KGOils & fatGeneric medicinesOintmentsTea, herbs & coffeeBiotechnologyAgrochemicalsSpicesOther pharmaceuticsCosmeticsLubricants & oleoDairySolid pharmaceuticsBeveragesBiopharmaceuticalAPIMinerals & inorganicCappersPohl & CoIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > BiotechnologyIndustries > Chemical > Agro ...

General SKU422W1590 MakeEngineering Systems TypeTabcap 5 No.9292 Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Inlet diameter0.5 mm Specified Features - Miscellaneous transport Capacity220 volt Miscellaneous transport MaterialStainless steel General Mounted on wheelscheck With switchgear(as is) Floorspace1,0x0,70 m Total height1,35 m Weight220 kg Extra SpecificationsWith RNA vibration funnel, type SRC-N,&:nbsp:X, Y travel table, tablet frames and toolingPowdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDetergent & surf.SugarOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicMiscellaneous transportTabcapIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Food & Feed  ...

General SKU330W1528 LocationBarneveld CEcheck MakeSeidenader Main Features MaterialStainless steel Motor0.6 KW Specified Features - Miscellaneous Motor0,6 kW, 230 volt With jacketcheck General TypeV50-2 Mach.No.1012/95 Year of construction1995 Floor space1,60x0,70 m Total height1,35 m Weight180 kg Extra SpecificationsWith hopper, Jost vibration unit, type JD3,output roll conveyor, &:nbsp:MiscellaneousOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals &  ...

Used, in very good condition Packaging type : Tetra Prisma Aseptic Package volume : 1000,00 ml Shape of packaging : Squareline

Packaging type Tetra Prisma Aseptic Shape of packaging Squareline Packaging volume 1000,00 ml Voltage 3N 400/230 V Frequency 50 Hz

This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine.

This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine.

This HILALSAN Advanced Cap 3320 was manufactured in 2019. It features a pressing force of 320 tons, a bending length of 3100 mm, and a stroke of 365 mm. With a throat depth of 510 mm and a main motor power of 30 kW, its ideal for heavy-duty press brake tasks. Only 351 operating hours. Contact us for more information.

Erlab Captair Filtair 936 Filter Extractor Erlab's exhaust-free, filtering chemical extractors offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless benefits that provides end-to-end protection throughout the lab and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance criteria of the fume hood and ensures your safety at all times. Pros Complete user protection Filtration safety : All models of captair filtair filter extractor comply with the AFNOR NFX 15-21 1 Class II standard. Pollutant retention capacity of chemical vapours in the working area, guaranteed by controlling the air velocity on the façade and complying with pollutant retention standards (XPX 15203, BS 7258, DIN 12927) Sampling valve for the expelled air allows the user to control the filter ...

General SKU406S1038 MakeBallerstaedt &: Co. Rastatt (D) LocationBarneveld TypePOLYMAT-VARIOSEAL PN Main Features Inlet diameter90 mm Number of1 heads Specified Features - Capper Single headcheck Suitable forplastic and glass containers Number of closing heads:1 Without motorcheck Manual operatedcheck CapacityDepending on the skill of the operator up to 700 sealing/h. Suitable for bottle/jar dia.90 mm Suitable for bottle/jar height375 mm MaterialStainless steel With jacketcheck General No.71.9615.011.1000 Year of construction1996 With switchcheck Floorspace0,6x0,4M Total height1 M Weight50 KgOils & fatGeneric medicinesOintmentsTea, herbs & coffeeBiotechnologyAgrochemicalsSpicesOther pharmaceuticsCosmeticsLubricants & oleoDairySolid pharmaceuticsBeveragesBiopharmaceuticalAPIMinerals & inorganicCappersBallerstaedt RastattIndustries > Food & Feed > Oils & fatIndustr ...

General SKUR1059 MakeBausch &: Ströbel Maschinenfabrik (D) TypeKSF-1020 No.4755 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Motor0.25 KW Number of1 heads Specified Features - Capper Electric capacity2 kW Motor0.25 kW 380 Volt With conveyor beltcheck With cappercheck Number of closing heads:1 Cappers Single headcheck Rotating cappercheck For pilverproof capscheck For plastic capscheck Number of closing heads:1 With motor0.25 kW 380 Volt With vibratory feed bowl(2x) With conveyor beltcheck Belt width80mm MaterialStainless steel General With switchgearcheck Floorspace4,0x1,2 M Total height2,0 M Weight1500 Kg Extra Specificationswith additional format parts:Round 31.5mm, Round 50mm, Round 51.5mm, Round 67mm, Round79mm, Square 53mm, Square 53mmBottle feeding and sealing machine, without filling installationOils & fatGener ...

This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine.

For many years, the TCAP 47 was considered one of the preferred closure variants for one-liter packages. However, when using one-liter Slim packs, this closure is disappearing more and more from the manufacturers' ranges. The background to this is the new development of a comfortable closure, which has now more than just established itself on the market. This new HeliCap 23 cannot normally be applied with the existing TCAP 47. However, we are able to convert the existing TCAP 47 for the new HeliCap23 with our workshop team. After that, you can continue to operate your filling line without a PT, which also saves service costs on the PT. Convince yourself of this space-saving and cost-effective alternative to an attractive product format. We will be happy to explain some details to you. Please contact us and let us know your planning wishes together On request, we can provide extensive ...

Fuji Imaging Plate System / CR System FCR Capsula X with: Reader Type CR-IR 357 Primary processing station 10 cassettes IP Cassette Type CC: 24x30 - 6 pcs./ 35x43 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.

Fuji Imaging Plate System/ CR System FCR Capsula X with Reader Type CR-IR 357 Primary processing station Cassettes IP Cassette Type CC: 18x24 - 2 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • To recommission the device, you will most likely need a license from the device manufacturer. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.