126,708 used machines on RESALE, but how to find them? Machine Search
Tensile and compression tester Manufacturer: Zwick Type Z2.5/TN1S Inclusive Force transducer 2 kN Pneumatic Specimen Holder Pneumatic control unit testExpert testing software Upgrade Packet testExpert II Documentation Calibration certificates Documents available
tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus -Part No.: 43521 -Measuring range: 3 - 65 Nm -Mounting: 3/8 -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg
Test device, test device for personal earthing, Safety Pips -Manufacturer: Wolfgang Warmbier, test device for personal earthing, original packaging -Type: Safety Pips -Article No.: 7100.181 -Operating mode: Battery operation 9V -Dimensions box: 115/110/H70 mm -Weight: 0.2 kg
BR-G17 18038 Testing Machine Manufacturer: Kirschenhofer Including Yaskawa ERAR-1000-06VX8-E10 robot Camera The Kirschenhofer testing machine type BR-G17 18038 is a specialized device that was developed for automated test processes in industry. It is particularly suitable for quality control of various products and components. Here are some of the key features and functions of this testing machine: Main features of the Kirschenhofer BR-G17 18038: Automation, versatile inspection methods, high speed, user-friendly user interface, robust design, data management.
Salt spray test by Weiss Salt Spray Test Chamber with Corrosion Testing Specifications: Test chamber capacity 480 l max. load 100 kg Brine storage tank 180 l Applications: Corrosion tests: Salt spray test: Room temp. up to +50 °C Condensation water test: Room temp. up to +45° Extensive documentation available incl. wiring diagram, parts list, manual, etc The plant is still fully functional. It is located in a research facility and has rarely been used.
test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg
Manufacturer: Rasco Model: SO1800T Year of Manufacture: 2007 Power Supply: - 400V 3 / N / PE - 208V 3 / PE - 230V 1 / N / PE - 50–60 Hz - 6 kW Air Supply: 6 to 10 bar Exterior Dimensions: - Width: 37.008 in (94.0 cm) - Depth: 43.307 in (110.0 cm) - Height: 88.583 in (225.0 cm) Weight: 871 lb (395 kg) Find more here - / Contact us at -
General SKU429T1358 LocationBarneveld MakeBrabender OHG Duisburg Main Features Inlet diameter15 mm L/D25 Specified Features - Viscosity test machine Single screw extrudercheck (and with double) Screw diameter± dia.15 mm L/D± 25 Number of heating zones:1 With jacketcheck Air coolingcheck Inlet± Ø 15 mm Feeding with hoppercheck Max. temperature500 °C Viscosity test machines MaterialStainless steel Information TypePlasti-Corder PL2000, Eurotherm Type 808 No.814 300 Floorspace1,45x0,55 m Total height0,8 m Weight280 kg Extra Specificationswith two diffirent extruders headsViscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...
Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm -Weight: 20.5 kg
Laboratory Furnace for Bending Test 120 kW Kiln 900 °C Chamber Furnace 2 bending chambers Ceiling height adjustment Temperature range: max. approx. 900 C Additional heating Control cabinet PC, Fabr. HP, Intel Core 2 Duo Voltage: 400 volts Power: 120 kW Year of Make: 2015 Antechamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm More items - new and used - can be found in our shop! International shipping costs on request!
Voltage tester, Duspol, voltmeter -Manufacturer: Wobla, voltage tester -Voltage range: 220-660V 0.05-0.25A / 110-750V 0.2-1.5mA -Number: 55x voltage testers available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: 260/100/H40 mm -Weight: 0.3 kg/pc.
Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg
Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg
Testing device for extension cables -Socket tester -Testing device for: extension cables, table sockets -Weight: 30 kg
-Testing device for electrical equipment -each with isolation transformer -Number: 7 available -Price: per piece
Hardness testing device, hardness measuring machine, hardness tester, hardness tester -Hardness tester: according to Brinell and Rockwell Accessories are missing and therefore it is sold as defective. -Handover in its current condition as inspected -Dimensions: 600/220/H660 mm -Weight: 92 kg
Pressure testing device, measuring device -with trailing-pointer -Max. pressure: 20 bar -High-pressure hose -Dimensions: 400/160/H200 mm -Weight: 4 kg
Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt for standards-compliant safety testing of electrical equipment are available. 1) Protective conductor resistance (RSL): measuring range: 0Ω-2.100Ω with resolution: 1mΩ, measuring range: 2.11Ω-31Ω with resolution: 10mΩ, test voltage range (DC): 4.5V-9V, min. test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ-1.5MΩ with resolution: 1kΩ, measuring range: 1.01MΩ-10MΩ with resolution: 10kΩ, measuring range: 10.1MΩ-310MΩ with resolution: 100kΩ, test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA-21mA with resolution: 10µA, measuring range: 20mA-120mA with resolution: 100µA. 5) Patient leakage current (medical version): measuring range: 0µA-310 ...
Alpha Alpha RPPA Production Rubber Process Analyzer Model 86042 Serial number V62AAA0095 With a production outer shell which protects operators With 5 sample auto loader with the option of using 4 rolls of film or 2 interchangeably 230 VAC 7.5 AMPS 50/60 HZ 1725 VA Max 120, Min 80 CE marked Year 2011
evopro Test Bench Printing AmbientLight P585 Manufacturer: evopro systems engineering AG Description: Test bench printing AmbientLight Project No.: P585 Serial number: 0001 Year of Make: 2017 Feed-in: 230 V / 50 Hz / 13 A (L+N+PE) Design: Closed test bench for printed AmbientLight modules Structure: Aluminum Profile Rack With Complete Test Cabin Application: Optical and functional testing of lighting or AmbientLight components
Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.
De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.
General SKU379X945 MakeBrabender LocationBarneveld CEcheck TypeMeasuring mixer 350E Main Features MaterialStainless steel Motor22.2 KW Specified Features - Viscosity test machine Viscosity meter Measuring extruder mixer Motor5,8 kW, 3x 400 V Variable speedcheck Speed0,2—200 rpm With Screencheck Information No.1936157 Year of construction2021 With switchgearcheck Floorspace0,63x1,17 m Total height1,30 m Weight302 kg Extra SpecificationsWith universal docking station, 22,2 kW, 3x 400 volt, (2019) Lab station, model 815809, (2019), 25 kW, 3x 400 volt, 350 rpm, : Viscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...
Prescott Rheo-Line Moving Die Rheometer (MDR) With Cutter
Key data: 450
The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...
Key data: 540
The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptable ...
Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.
Alpha PRPA Production Rubber Process Analyzer Model 86042 Serial number V62AAA0095 With a production outer shell which protects operators With 5 sample auto loader with the option of using 4 rolls of film or 2 interchangeably 230 VAC 7.5 AMPS 50/60 HZ 1725 VA Max 120, Min 80 CE marked Year 2011
The Oxipack SLT is a state-of-the-art, non-destructive leak tester specifically designed for packaging inspection. It enables precise and fast leak detection without damaging the object being tested. This device is ideal for use in quality control and helps to ensure the integrity of packaging. With its user-friendly interface, the SLT offers straightforward handling and reliable results. The modern technology ensures high sensitivity and repeatability in leak testing, allowing even the smallest leaks to be effectively detected., This used unit, serviced by Oxipack as recently as November 2025, meets all required standards and is both durable and low-maintenance, making it a cost-effective solution for companies that need to conduct regular testing. The SLT is an excellent choice for any industry where tightness is critical, including the food, pharmaceutical, and packaging sectors., pow ...
The testing device can measure even the smallest leaks in packaging (helium detection)., The device is little used and in good condition., Information from the manufacturer’s brochure:, The detection limit of < 10-8 mbar l/s of the CONTURA Z can only be determined by mass spectrometric, Analysis can be achieved with a test gas., However, when sensitive flexible packaging is exposed to such a pressure difference,, the sealing seams could be subjected to such severe stress that the package could even burst., Such stress is eliminated by the patented membrane chamber principle of the CONTURA Z²., Function:, The product to be tested is placed manually or automatically on the bottom membrane. When the lid, is closed, the test procedure is initiated automatically., During the evacuation, the pressure of the atmosphere pushes the highly elastic membranes against the, packaging, and the conto ...
Auction-ID: A1-42014-289
For sale is a high-precision in-circuit test system (ICT) from the market leader SPEA, model 3030C BU100 in the compact version. This machine was used in our production in China for specialized testing tasks. In order to guarantee you a smooth takeover, we will take care of the transport of the machine to Germany for you if you make a purchase. The system is fully equipped, including digital pin electronics, high-precision stimuli and a powerful on-board programming (OBP) module. Key Features & Technical Highlights: System Configuration: Model: SPEA 3030C BU100 Compact (Colour: RAL 9010 Pure White) Footprint: Only 970 x 670 mm – ideal for installation close to the line. Interface: Pylon vacuum interface (max. 12 blocks), currently equipped with 10 pylon blocks. Test Channels: Prepared for up to 1024 channels. Powerful control computer: Industrial PC wit ...
Technical data: Manufacturer: ogp Type: Smartscope CNC 250 Year of Make: 2004 Travel distances X/Y/Z: X 250 mm, Y 150 mm, Z 200 mm Scale resolution: 0.5 μm Condition Condition: Used Functional: Tested and fully functional
drawing force 20 - 400 kN drawing distance max. 1100 mm Pressure 40 to
maximum number of results exceeded
please refine your search
10 € 
