bosch hydraulic used for sale

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Orsta, hydraulic cylinder type 4514-3328/0 Pn12 -Stroke: 404 mm -Piston rod: Ø 35 mm -Cylinder: Outer Ø 106 mm -Mounting: Bolt circle Ø 180 mm -Dimensions: 910/220/H220 mm -Weight: 30 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders -Manufacturer: FXMeiller, hydraulic cylinder / tilt cylinder stroke 670 mm -Piston rod: Ø 45 mm / holder Ø 40 mm -Recording cylinder: Ø 50 x 45 mm -Cylinder: outside Ø 102 mm -Dimensions: 1055/210 / H180 mm -Weight: 50 kg

Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 60 mm -Piston rod: Ø 20 mm / bore Ø 8 mm -Cylinder: outside Ø 90 mm -Admission: bolt circle Ø 124 mm -Number: 2x cylinders available -Price per piece -Dimensions: Ø 150 x 435 mm -Weight: 16 kg / pc.

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, center mower lifting cylinder -Hydraulic cylinder: stroke 200 mm -Piston rod: Ø 23 mm / thread Ø22 x 50 mm -Mounting: Ø20 x 32 mm -Cylinder: outside Ø 62 mm -Dimensions: 770/70/H62 mm -Weight: 7.2 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, center mower lifting cylinder -Hydraulic cylinder: stroke 105 mm -Piston rod: Ø 23 mm -Recordings: Ø20 x 22 mm -Cylinder: outer Ø 58 mm -Dimensions: 475/70/H75 mm -Weight: 5.7 kg

to move the heaviest loads Total thrust 400 to - 4 x 100 to Cylinder stroke approx. 1,000 mm Double-acting hollow piston cylinders Tie rods 9 x 6,000 mm, 1 x 5,000 mm Operating pressure up to 400 bar Tank capacity approx. 500 litres Operation via wired remote control Electrical values 400 V / 2 x 30 KW

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Hydraulic unit: from Heycop 3UN/2000 automatic lathe -Motor: Siemens 1.5 kW/2855 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Dimensions: 300/500/H650 mm -Weight: 130 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump -Hand hydraulic pump: with cylinder, unfortunately no type designation -Stroke: 45 mm -Piston rod: Ø 32 mm -Dimensions: see drawing in the photos -Dimensions: 645/230/H480 mm -Weight: 50 kg

pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg

Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: stroke 155 mm -Piston rod: Ø 70 mm -Hole: Ø70 x 70 mm -Cylinder: outer Ø 120 mm -Dimensions: 865/160/H160 mm -Weight: 53 kg

hydraulic outriggers for loader cranes Stroke 500 mm Stable design with guide via square tube Mechanically telescopic with bolt 300 mm - grid 100 mm Outer square tube 100 x 100 mm Folding device for support cylinder - can also be dismantled Outriggers can be folded down approx. 60° Retracted height 1,000 mm with folding device with integrated load holding valve Removable support plate - size 320 x 250 mm Weight 80 kg / piece - New - unused - 2 pieces in stock - unit price -

Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, -Manufacturer: WMW HECKERT, clamping device from milling machine FSS 315-V -Type: FHKN 3311 -Motor: VEM 0.12 kW -Dimensions: 440/150 / H220 mm -Weight: 24 kg

Hydraulic cylinder for ATLAS loader crane Stroke 750 mm Piston rod 125 mm Outer diameter cylinder tube 235 mm Piston diameter approx. 200 mm Length retracted center - center bolt 1,100 mm Bolt diameter cylinder tube 80 mm Width of the mount 245 mm Bolt diameter 100 mm Both bolt mounts with plain bearings Spare part number original Atlas 4189526 Width of the piston rod holder 130 mm Weight approx. 330 kg / piece Original price approx. € 9,500,-- -New- - 2 pieces in stock - price per piece -

Inv. Num. : 8131 Type: HPD-S 63 Producer: Hydrap Created: 1997 Parameters: Compressive force: 63 t Stroke: 1000 mm Maximum lifting speed: 410 mm/s Machine height: 2200 mm Machine length: 1200 mm Machine width: 500 mm Machine weight: 13000 kg

pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 60 mm -Piston rod: Ø 35 mm -Flange: Ø 69 mm -Recording thread: Ø 22 x 2 x 30 mm -Stroke: 900 mm -Dimensions: 1090 x 100 x 100 mm -Weight: 17 kg

pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1080SF50VASF5045 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1100 mm -Weight: 4.5 kg

pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic filter, filter element -Manufacturer: Hydac, filter element Betamicron OVP -Type: 2600 R 005 BN4HC -Dimension: Ø 143 x 920 mm -Weight: 6.4 kg

pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor VICKERS 2520V12A8 Shaft diameter: Ø 22 mm Flange diameter ( inside ): 102 mm Bolt circle diameter: Ø 115 mm New ! Dimensions: 310 x 175 x 160 mm

pressure: 100 t passage width: 810 mm stroke: 400 mm table surface area: 1140x740 mm ram surface: 1140x740 mm dayligth: 670 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1800x1800x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump HUGRABPUKA A10X pressure: 17.5 MPa 1500 rpm New ! Dimensions:130 x 90 x 115 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: from automatic band saw Behringer HBP -Piston rod: Ø 22 mm -Stroke: 445 mm -Admission piston rod: M12 -Dimensions: 605/100/H85 mm -Weight: 8.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg

Hydraulic Pump ORSTA B 25 R ( B25R ) PT 11112 / 04

Hydraulic pump HUGRABLUKA A 18X ( A18X ) 2.5 MPa 1500 rpm New ! Dimensions: 90 x 110 x 135 mm

Hydraulic power unit with tank HYDRONORMA pump: Lamborghini MLPD/G 148 C ( MLPD/G148C ) engine: 2.2 kW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 600 x 340 x 630 mm

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: single-acting -Stroke: 295 mm -Piston rod: Ø 40 mm -Dimensions of mount/rollers: see photos -Total length when retracted: 530 mm -Dimensions: 530/235/H130 mm -Weight: 26 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 25 mm -Tube: Ø outside 50 mm -Stroke: 1084 mm -Total length: retracted 1215 mm -Admission: hole Ø 20 mm -Dimension: Ø 50 x 1215 mm -Weight: 12 kg

Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single acting -Stroke: 346 mm -Piston rod: Ø 35 mm -Take: M16 x 1.5 -Total length retracted: 695 mm -Dimensions: 695/80/H100 mm -Weight: 10.6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Orsta, hydraulic cylinder type R1-63 / 40x1000 -Stroke: 1000 mm -Piston rod: Ø 40 mm / thread Ø24 x 16 mm -Mounting hole: Ø40 x 40 mm -Cylinder: outside Ø 72 mm -Dimensions: 1260/100 / H90 mm -Weight: 26 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 75 mm -Type designation: 9098346-04 - Piston rod: Ø 25 mm / thread Ø24 x 70 mm -Admission: Ø30 x 28 mm -Cylinder: outside Ø 80 mm -Dimensions: 640/80 / H110 mm -Weight: 8.2 kg

Hydraulic power unit with tank and radiator REXROTH pump1: 1PF2G222/16RA1MSG pump2: 1PV2V3-40/12RE01MC100A1 motor: 2.2 kW 220 / 380 V Tank: 120 l two separate pressure circuits !' used, tested !' Dimensions: 770 x 570 x 940 mm

Hydraulic power unit PAGUS Pump: SPN 2/14 DC002/9B ( SPN2/14DC002/9B ) Motor: 5.5 KW 400 / 690 V Tank: 120 l used ! Dimensions: 1450 x 900 x 890 mm

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Pacoma, single-acting hydraulic cylinder, 133 mm stroke -Type designation: 3483441M91 43 L 01 -Cylinder: outer Ø 75 mm -Piston rod: Ø 60 mm -Dimensions: 325/75/H120 mm -Weight: 8.6 kg

Hydraulic Power Unit with Tank REXROTH 952563 MPU1-V710-100L/ 00025161+00963916 Pump: PV7-11/06-10RA0MA0-10-A501 P: ca 95 bar Q: ca 11 l/min motor: 3 kW 230 400 V Tank: 50 l used, tested ! Dimensions: 550 x 400 x 1850 mm

Hydraulic power unit PAGUS Pump: VT VOTL BOLOGNA 06 D 3 01 98 ( 06D30198 ) Motor: 3.0 kW 380 / 660 V Tank: 50 l used ! Dimensions: 1030 x 500 x 890 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Langen, hydraulic cylinder type ZD 63/150 -Stroke: 150 mm -Cylinder: outside Ø 75 mm -Piston rod: Ø 45 mm -Mount: hole circle Ø 69 mm -Dimensions: 345/140 / H95 mm -Weight: 11 kg

Hydraulic power unit, drive unit REXROTH U 11.0 R 3.8 - 20 P = 150 kp/cm² V = 2.73 cm3 motor: 1.1 KW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 740 x 570 x 430 mm