bosch diesel pump used for sale

250 W motor Operating range from 3 to 10 m³/h Epoxy-based coating for corrosion protection High-voltage capacitors Copper motor winding Stainless steel motor shaft Integrated float that kicks in as soon as the water level rises Thermal protection against overheating Auction-ID: A7-50799-499

250 W motor Operating range from 3 to 10 m³/h Epoxy-based coating for corrosion protection High-voltage capacitors Copper motor winding Stainless steel motor shaft Integrated float that kicks in as soon as the water level rises Thermal protection against overheating Auction-ID: A7-50799-401

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 800 x 700 mm Weight: 30 kg Auction-ID: A7-50801-19

Stainless steel 316 Forklift available for loading Auction-ID: A3-46142-13412

2x Used Grundfos MTRE 10-10/10 Centrifugal Water Pump Model control unit: MGE112MC-FT130-G3 & \"Service Terminal Box\" Pump model: MTRE15-9/5 H-W-I-HQQV Auction-ID: A1-50936-75

Used Ebara A10S Multistage Dry Vacuum Pump Auction-ID: A1-50936-237

The submersible pump with float for dirty water presented, with a power of 900W, is a reliable solution that fully meets the needs of users looking for an efficient and effective method for water drainage. Auction-ID: A7-50799-322

Power: 600 watts Voltage: 230 V~50 Hz Thermal protection: 65 °C Flow rate: 270 l/min Pressing distance: up to 80 m Pressing height: up to 8 m Auction-ID: A7-50799-252

Plot has been tested for operation Auction-ID: A1-40164-32

Ebara EVM 18 12F5 & SAER CVM 131-B/11 multistage centrifugal pumps – 11 & 5.5 kW Specifications: Quantity: 2 vertical multistage centrifugal pumps Ebara EVM 18 12F5 Version: MONO/D/SE Flow rate: approx. 130–400 l/min / approx. 7.8–24 m³/h Head: approx. 188–83 m Maximum head: approx. 194 m Engine power: 11 kW / 15 hp Electric motor: AEG AM160MVA2 Supply voltage: 3-phase, 380–415 / 660–720 V, 50 Hz Speed: approx. 2925 rpm Protection class: IP55 P/N: 3180100012 Serial Number: BG3210620 CE marked SAER Elettropompe CVM 131-B/11 Type: Vertical Multistage Centrifugal Pump Flow rate: 10–22 m³/hr Head: 89–20 m Engine power: 5.5 kW / 7.5 hp Supply voltage: 400/690 V, 50 Hz Current: 11 / 6.4 A Speed: 2900 rpm Protection class: IP55 Weight according to type plate: 68 kg Serial Number: 1982125 CE marked Features: Electric motors Exis ...

Bucher PM20 – Pigtail pump 20 t/h This BUCHER spiral pigtail pump with a maximum capacity of 20 t/h is designed for the transfer of harvests and loaded products in the wine and agri-food environment. Its configuration on wheels, combined with a helical pumping technology adapted to the reception of the harvest and the transfer of the pomace, makes it a simple, robust and immediately usable solution to complete a pumping installation in the cellar. Technical data Pigtail helical pump Brand: Bucher Type PM20 Level sensor Boers outlet Ø 120 mm Max capacity: 20 T/h Wheeled assembly Dimensions Length: 2100 mm Width: 700 mm Height 900 mm Tank size: 650×650 mm, height 370 mm Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-330

Plot has been tested for operation Auction-ID: A1-40164-33

2010 Lowara SHS 32-125/11/A – Centrifugal pump 9-24 m³/h This used LOWARA SHS 32-125/11/A centrifugal pump is a reliable and efficient solution for liquid transfer operations in the food, wine or industrial environment. Equipped with a 1.1 kW three-phase motor, it offers a flow rate of 9 to 24 m³/h for a head of 19.4 to 9.8 m. Compact, robust and made in Italy, it is an immediately operational equipment to complete or strengthen a pumping installation while controlling the investment. Technical data Brand: LOWARA Model: SHS 32-125/11/A Year: 2010 Type: centrifugal pump Flow rate: 9 to 24 m³/h HMT: 19.4 to 9.8 m Motor power: 1.1 kW Motor: three-phase 3~ Power supply: 230/400 V – 50 Hz Current: 4.52 / 2.61 A Motor speed: 2875 rpm Protection class: IP55 Insulation class: F Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Au ...

Workshop set with degreaser tray, oil collector, barrel rack and grease pump Specifications: Degreaser tray / parts cleaner Electrical connection: 220/230 V Degreaser tank dimensions: approx. 1,200 × 1,100 × 620 mm Oil drip tray with steel grid and barrel rack Dimensions oil collection tray/barrel rack: approx. 1,250 × 1,300 × 1,100 mm Manual grease pump with reservoir and hose Total lot weight: indicatively approx. 400–600 kg Features: Underlying vessel for cleaning/degreasing agent Oil drip tray with heavy steel grids Integrated steel rack/barrel stand Draining option Kramp Pangea Oil 15W-40 engine oil Various jerry cans, reservoirs and other workshop accessories visible in the photos Particularities: Sold as one complete lot. The remaining amount of oil and other liquids is unknown. Used condition with signs of use, oil and soiling. Operation not test ...

A mobile pump room with sprinkler system to NFPA standards, equipped with a powerful 6-cylinder turbocharged diesel engine and a displacement of 8.1 liters. This unit is complete with a sprinkler control panel, diesel pump and logbooks, 176 operating hours, Fuel: Diesel, Engine: 8.1 liters, 6-cylinder inline, Turbocharged diesel, Sprinkler system: Includes control panel and diesel pump, Logs: Included, Application: Meets NFPA standards for fire safety Auction-ID: A1-47395-703

The Alfa Laval MR-200 Sanitary Self Priming Liquid-ring Pump is a pump specially designed for food, chemical, pharmaceutical and other industries where acid-resistant steel is resistant to the products to be pumped. All products wetted parts, i.e. pump casing, casing cover and impeller are made of acid-resistant steel AlSl 316. Clamp screws and legs are made of stainless steel AlSl 304. lntermediate part is in cast iron which is zinc coated and laquered making it highly corrosion resistant. Motor: 7,5 kW - 400/440 V - 50 Hz - 1.440 rpm - 15 A. Impeller diameter: 199 mm. Connections on the inlet / outlet: SMS 76 mm (3). Current capacity: 35.000 ltr/h @ 1,1 Bar., Type of Machine: Sanitary Self Priming Liquid-ring Pump, Stock Number: 1653, Diameter of the impellor: 199 mm, Motor: 7,5 kW - 400/440 V - 50 Hz - 1.440 rpm - 15 A, Current maximum capacity: 35.000 ltr/h @ 1,1 Bar

2010 Lowara SHS 32-125/11/A – Centrifugal pump 9-24 m³/h This used LOWARA SHS 32-125/11/A centrifugal pump is a reliable and efficient solution for liquid transfer operations in the food, wine or industrial environment. Equipped with a 1.1 kW three-phase motor, it offers a flow rate of 9 to 24 m³/h for a head of 19.4 to 9.8 m. Compact, robust and made in Italy, it is an immediately operational equipment to complete or strengthen a pumping installation while controlling the investment. Technical data Brand: LOWARA Model: SHS 32-125/11/A Year: 2010 Type: centrifugal pump Flow rate: 9 to 24 m³/h HMT: 19.4 to 9.8 m Motor power: 1.1 kW Motor: three-phase 3~ Power supply: 230/400 V – 50 Hz Current: 4.52 / 2.61 A Motor speed: 2875 rpm Protection class: IP55 Insulation class: F Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Au ...

feed pressure: 50 bar liter capacity: 8x0,2 l/min total power requirement: 0,55 kW weight of the machine ca.: 24 kg dimensions of the machine ca.: 450x230x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 2,4 bar liter capacity: 2.500 l/h total power requirement: 0,57 kW weight of the machine ca.: t dimensions of the machine ca.: 350x150x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PFT G4 light II plastering machine / mixing pump in exceptionally clean and well-maintained condition. The machine was used only a few times and spent most of its life stored indoors in dry conditions. It was not used daily on construction sites and is not a heavily worn high-hour” plastering machine. Approximate year of manufacture: 2008

Group equipped with 2 pumps for oil; on pallet Auction-ID: A1-50864-52

Fresenius Pilot Power Fix 2 – Attachment System for 2 Syringe Pumps Manufacturer: Fresenius Model: Pilot Power Fix 2 Part Number: 073428 Condition: Good, Functional Tested Auction-ID: A1-51275-59

Reference 102502. Three-phase power supply: 380–420 V, 50 Hz, 2.0 to 2.1 A Functional Auction-ID: A1-51273-22

Cardinal Health Alaris Asena – IDS Docking Station for Infusion Pumps / Syringe Pumps Manufacturer: Cardinal Health – Alaris Model: Asena DS (IDS Docking Station) Condition: Good, Functional Tested Auction-ID: A1-51275-88

With buffer tank; with water meter; engine brand Elmot Schäfer 2.2kW; on pallet Auction-ID: A1-50864-55

Alaris Asena – IDS Docking Station for Infusion Pumps / Syringe Pumps Manufacturer: Alaris Model: Asena (IDS Docking Station)Condition : Good, Functional Tested Auction-ID: A1-51275-87

Wassenburg MEDI-PLUS – Endoscope Irrigation / Pretreatment Pump Manufacturer: Wassenburg Model: MEDI-PLUS Name: Wassenburg Medical MEDI-PLUS MEDI 150 Included: Printer and cables Condition: Very good pre-owned condition, functionally tested Auction-ID: A1-51275-12

Industrial suction assembly with electric motor and filtration/separation system, Supplied with hoses and accessories. Electric motor: power 2.2 kW – power supply 380-420 V – frequency 50 Hz. Functional Auction-ID: A1-51273-23

Nutricia Flocare 800 – Enteral Nutrition Pump Manufacturer: Nutricia Model: Flocare 800 Continuous or Dose Feeding, Alarm Functions Condition: Good, Functional Tested Auction-ID: A1-51275-79

Year of manufacture 1987. Flow rate: 80 m³/h – Rotational speed: 1,420 rpm – Power: 1.7 kW. Inlet pressure: -920 mbar (relative). functional Auction-ID: A1-51273-27

with rotor motor 1.5 kW; with collection tray Auction-ID: A1-50864-61

CareFusion Alaris GP Plus Guardrails Volumetric Infusion Pump Manufacturer: CareFusion Model: Alaris GP Plus Guardrails Safety Software Guardrails Flow Rate 0.1–1200 mL/h Condition: Good working condition Auction-ID: A1-51275-139

208 cc displacement; 3800 RPM; 7.5 meters maximum suction level; 28 meters maximum head; 3.6 liter gas tank; equipped with sieve, couplings, hose clamps; manual; 3903 Auction-ID: A1-51256-61

208 cc displacement; 3800 RPM; 7.5 meters maximum suction level; 28 meters maximum head; 3.6 liter gas tank; equipped with sieve, couplings, hose clamps; manual; 3903 Auction-ID: A1-51256-60

Smith & Nephew Dyonics Access 15 – Arthroscopy Irrigation Pump Manufacturer: Smith & Nephew Model: Dyonics Access 15 Functions: Active Inlet/Outlet Control, Flow Rate Exceeds 2 L/min, Built-in Wash Function, Stand-Alone System Condition: Good, Functional Tested Auction-ID: A1-51275-33

FMS Duo Plus – Arthroscopy/Fluid Management Pump with Shaver Manufacturer: FMS (Future Medical Systems) Model: Duo Plus Included: Shaver and Foot Control Functions: Independent Pressure/Flow Control, Inlet and Outlet Management Without Wall Suction, Wash Mode Condition: Good, Functional Tested Auction-ID: A1-51275-32

1x submersible pump Arvex 200man and 1x hydrophore pump Kärcher Bp3 Auction-ID: A1-50864-113

Manufactured in 1988. Suction flow: approx. 45 m³/h – Absolute final pressure: 100 mbar. Electric motor: 0.75 kW – Power supply: 50/60 Hz – Protection class: IP54. Functional Auction-ID: A1-51273-28

Group equipped with 2 pumps; 1x Abb motor and 1x Rotor; on pallet Auction-ID: A1-50864-53

Hospira Plum A+ – Volumetric Infusion Pump Manufacturer: Hospira Model: Plum A+ Cassette System, Two Inlet Lines Parenteral, Enteral and Epidural Infusions; Neonatal, Pediatric and Adult Condition : Good, Functional Tested Auction-ID: A1-51275-71

Abbott LifeCare 5000 Plum Volumetric Infusion Pump Manufacturer: Abbott Model: LifeCare 5000 Micro Mode: 0.1 to 99 mL/hr – Macro Mode: 1 to 999 mL/hr Single Delivery, Dual Channel, and Multidose Condition: Good, Functional Tested Auction-ID: A1-51275-105

Stock number: PC1393, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Construction: On leg stand, Motor: 11 kW - 400 Volt - 2930 rpm, Theoretical capacity: Max 38,000 l/h, Stage: 1, Working pressure : Max 6.8 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2

Stock number: PC1394, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Construction: On leg stand, Motor: 4 kW - 220/380 Volt - 2850 rpm, Theoretical capacity: Max 40,000 l/h, Stage: 1, Working pressure : Max 3.6 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2

Two unused Allweiler and KSB pumps are available. 1) Thermal oil centrifugal pump Allweiler NIT 50-200U5 AW4, year of manufacture: 2023, flow rate: 40m³/h, delivery head: 54m, power: 7.4kW, speed: 2900rpm, pumped medium density: 0.75kg/dm³, viscosity: 1mm²/s, pipe diameter: 203mm. 2) Reconditioned cooling water pump KSB Etabloc, year of construction: 2021, flow rate: 26m³/h, delivery head: 15.5m, viscosity: 1mm²/s, speed: 2915rpm, MEI: 0.7, pipe diameter: 116mm. The KSB pump was overhauled in 2023. Documentation available. On-site inspection is possible.

Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-51107-1043

Manual detailed in description Single workpiece loading dimensions: 550 x 600 x 1500 mm Auction-ID: A7-51107-1036

Dry vacuum pump, vanes Equipped: - Pallets - Inlet port: diameter 24 mm - Outlet port: 40 mm diameter with filter - Motor drive Pedestal mounted Maximum capacity: Flow rate 120 m3/hour Engine power: 1.5 kW at 1420 rpm Auction-ID: A1-51318-243

Consisting of: outdoor unit and a separate hydraulic/indoor unit, indoor unit size: 72x36x35cm, specifications unknown. Auction-ID: A1-41281-244

Halloween Decorative Pumpkin \"Pumpink\" Decorative Fiberglass Pumpkin Head Man Height: 120 cm Condition: New Disassembly and loading are to be arranged by the buyer. Auction-ID: A1-51201-148