We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,235 used machines on RESALE, but how to find them? Machine Search
used
High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation
used
Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 590 mm Spindle speeds: stepless from: 60 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.80 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1650 mm Various accessories: Digital readout number of axis:: 3 Manufacturer: PHILIPS Rotary table diameter: 380 mm
used
Control: CNC 314 / POSELESTA II / (X, Y, Z, W) Operating hours: 13000 Technical data Table length: 600 mm Table width: 380 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 450 mm Table load max.: 300 kg Drill capacity in steel: 30 mm Taper in spindle: ISO: 30 Stroke of drilling spindle (Z-axis): 140 mm Bore diameter max.: 220 mm Distance table to spindle: 0 - 550 mm Spindle speeds: stepless from: 30 rpm up to: 4000 rpm Feeds: from: 500 mm/min up to: 1000 mm/min Drill spindle slide: number (steps): 4 from: 0.01 mm/r up to: 0.23 mm/r Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3500 kg Overall dimensions machine: Length: 1900 mm Width: 1700 mm Various accessories: Manufacturer: ELESTA Visulesta II
used
diameter:500 mm tool adaptor:50 Weight:12 kg face movement each head:82 mm feeds:0,06 mm/U
used
throat:580 mm tool adaptor:drm. 130 weight of the machine ca.:0,1 t dimensions of the machine ca.:0,4 x 0,4 x 0,58 m used spindle support bearing for spindle diameter 130 mm
used
diameter:400 mm tool adaptor:MK 5 Weight:10 kg Slide cross:52 mm Good condition Wohlhaupter facing head with Morse taper 5
used
diameter:300 mm tool adaptor:40 Weight:5 kg Taper ISO 40
used
diameter:200 mm Weight:4 kg
used
diameter:400 mm tool adaptor: 50 Weight:12 kg slide adjustment:52 mm feeds:0,02 - 0,24 mm/U fine adjustment - cross:0,01 mm turning speed range:0 - 600 U/min Tool taper:22 mm
used
I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.
used
Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1
used
Spindle size: dia 200 / ISO 60 X travel: 9.000 - 22.000 mm Y travel: 4.000 - 5.000 mm Z travel: 1200 mm W travel: 1500 mm Spindle speed: 700 RPM Rotary table: - Surface: 3500 x 3500 mm Bxiuasgo - Travel: 2900 mm
used
49-spindle adapter drilling unit for CNC processing centres Brand: ATEMAG Type: Function Line
used
Spindle size: dia 230 / ISO 60 X travel: 9.000 - 24.000 mm Y travel: 5.000 mm Z travel: 1.500 mm W travel: 1.750 mm Spindle speed: 700 RPM Rotary table: - Surface: 3500 x 3500 mm - Travel: 2900 mm
used
Spindle size: dia 200 / ISO 70 X travel: 6.000 mm Y travel: 4.500 mm Z travel: 1000 mm W travel: 1.250 mm Spindle speed: 800 RPM Rotary table: - Surface: 3600 x 3600 mm - Travel: 2000 mm
used
Spindle size: dia 200 / ISO 60 X travel: 18.000 mm Y travel: 5000 mm Z travel: 1000 mm W travel: 1.300 mm Spindle speed: 700 RPM Rotary table: - Surface: 4500 x 4500 mm - Travel: 2000 mm
used
Spindle size: dia 230 / ISO 60 X travel: 9000-25000 mm Y travel: 5000 mm Z travel: 1500 mm W travel: 1750 mm Spindle speed: 800 RPM Rotary table: - Surface: 4000 x 4000 mm - Travel: 2500 mm
used
axis X x Y x Z x W: 3350x2510x1600x1600 mm 3 pcs plate 1500x4000x200 mm 1x table SKODA OB20281, diameter 1600x1600 mm, new in 1971 with tools, accessories and screw compressor weight of machine with table 47,5 ton refurbished 2010
used
Facing slide needs overhauling.
used
Clamping surface: 800x400mm, quill stroke: 150mm, rotational speed: 70-2000/min, weight: 7t.
used
Horizontal drilling and milling machine make PFEIFER type F 600Make -No: 0179 built in 1955Technical specifications:Spindle mount: ISA 40Cross travel X:1000 mmVertical travel Y:800 mmLongitudinal travel Z:1200 mmTable size: 750 x 680 mmSpindle stroke: 500 mm32 spindle speeds: 10 - 1000 rpm.80 feeds: 0.125 - 6.0 mm/rev.Weight approx.: 4.0 tExternal dimensions approx.: 3500 x 1400 x 2300 mmWith- steady rest- ViseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Travel X/Y/Z: 800mm/690mm/630mm, max. spindle speed: 15000 rpm, drilling capacity: 30mm. Table size X/Y: 630mm/630mm, max. workpiece weight: 1100kg, control: Siemens Sinumerik. Dimensions X/Y/Z: 6000mm/2900mm/2400mm, weight: approx. 25000kg. Spare parts available. Including chip conveyor and separate coolant system.
used
I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.
used
WMW-Union // BF-T 90/3Offer Control: Heidenhain TNC 124 Year of construction: ca. 1980 X-axis: 1,530 mm Y-axis: 900 mm Z-axis: 1,500 mm Spindle diameter 100 mm Spindle speed 8-1,600 rpm 24 stages Drive power spindle 11kW Recording SK50 Table size 1.250x1.400mm
used
Portable pipe amp; bolt threading machine Pipe capacity 1/8 to 2 " Bolt capacity 1/4 - 2 "
used
X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.
used
Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,
used
offer 22312 Specifications: - Drilling capacity in steel ST 60 25 mm - Drilling spindle holder MK 3 - 8 drilling spindle speeds 100 - 1280 rpm - Drilling spindle stroke 130 mm - Projection 220 mm - Column diameter 115 mm - Drilling unit + table height-adjustable - with hand crank over rack and pinion - Table dimension 350 mm - Drive 400 V / 1.2 / 1.5 kW - Space requirement approx. W 800 x H 1850 x D 900 mm - Weight approx. 250 kg
used
M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm
used
Travel X-axis 200 mm Y-axis 200 mm Z-axis 250 mm Clamping table Table clamping surface 400 x 300 mm Head Spindle speed 100 – 3000 rpm Spindle holder MK 0 Quill stroke 70 mm Sony digital display, 2 axes Accessories according to pictures Vice Collets Centering microscope Condition The machine comes from a technical school and is in good condition
used
1 piece used rotary and/drill table Manufacturer: Skoda Type: E25 Year: 1987 Table load max: up to 25t Dimensions 2.000 x 2.000 mm electr. adjustable Mass: 10t
used
Catalog No. : 6346 Type: WHN 13 A Producer: TOS Made in: 1980 Characteristic: Control system: MEFI CNC 859 Length of the working table: 1600 mm Width of the working table: 1800 mm Maximum rotary speed of the spindle: 2800 1/min X-Axis travels: 2000 mm Y-Axis travels: 1600 mm Z-Axis travels: 1200 mm Power of the spindle: 38 kW Machine weight: 34.600 kg Replaced ball screws. Measuring each IRC axis separately. Drives separately each XYZ axis.
used
Mitsubishi MAF 240/180B CNC Floor Type HBM, New 1980 (Recontrolled in 1999) Condition: Very Good Type of CNC Control: Gidding & Lewis 8000B CNC Control - Recontrolled 1999 Spindle Diameter: 7.08"(180mm) Milling spindle diameter: 9.44"(240mm) Vertical Head Travel, Y-Axis: 169"(4300mm) Horizontal Column Travel, X-Axis: 1200" (30500mm) Headstock Travel, Z-1 Axis: 47.24"(1200mm) Spindle Travel, Z-2 Axis: 47.24" Total Axial Travel: 94.49"(2400mm) Rapid Traverse, X&Y Axes: 315 IPM Rapid traverse, Z, W and U Axes: 197 IPM Spindle Taper: CAT #50 Spindle Speeds: 6-1200 RPM - (3-Steps) Max. Spindle Thrust: 11,000 Lbs Constant Power Range: 79-1200 RPM Rotary Table Manufacture and Model: Mitsubishi DIT-A21X30 Rotary Table Size: 82" x 118" (2100x3000mm T-Slotted Rotary Table Max. Weight Capacity: 30 Tons Rotary Table Type: Insliding Rotary Inslide Travel: 59" (1500mm) Rotary Ta ...
used
used
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1300 mm Table dimensions: 1800x1800 mm Control: ECS 2101 number of spindle speeds: 12,5 - 800 (63x) voltage: 380 V Control: total power requirement: 25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC control HEIDENHAIN TNC 355 Spindle diameter 100 mm x-travel 1130 mm y-travel 1250mm z-travel 950 mm Flange diameter of the hollow spindle 221.44 mm Table clamping area 1120 x 1000 mm Spindle mount ISO 50 size Mass of the workpiece 3000 kg Quill stroke 650 mm Spindle speeds 0 - 1500 rpm Feed speeds 4 - 2500 mm / min Rapid traverse 4.5 m / min Total power requirement 32kVA Weight of the machine approx. 14 t Dimensions L x W x H 4.75 x 2.45 x 3.03 m
used
Double-sided three-spindle drilling and grooving machine HELMA Clamp pneumatic Table size 1100x350 mm Drill diameter 16 mm Table height 900 mm Distance between spindels 500 mm Engine power 4.5 kW Overall dimentions 2400х1500х2200 mm Weight 1000 kg
used
INNSE, YOM: Year 1976, retrofitted 2012 Spindle: 200mm Milling spindle: 305mm X: 19800mm Y: 4500mm Z: 1500mm W: 1000mm Table stroke: 3000mm Rotary table: 5000mm Max. loading: 200t
used
For sale: Lagun universal milling machine type FU TV 125 The machine is in good condition and has a table surface of 1,250 x 280 mm and is equipped with T-slots (3 x 16 mm). The movement of the X, Y and Z axes is 850 x 290 x 475 mm The spindle holder is ISO 40. The maximum variable speed is 1,800 rpm. The spindle head can rotate from side to side and tilt from front to back! The longitudinal and transverse feed movement is 2,500 mm/min and 750 mm/min. The maximum main engine power is 5.5 hp. The maximum workpiece weight on the table is 300 kg. The total weight of the machine itself is 2,000 kg. Available from stock, subject to prior sale.
used
Portable pipe amp; bolt threading machine Pipe threads 1/4–4" = 16–63 mm Bolt threads 14–60 mm = 1/2–2" Also capable of threading plastic covered pipes
used
spindle diameter: 105 mm x-travel: 2100 mm y-travel: 1500 mm z-travel: 1400 mm Table area: 1750x2000 mm turning speeds: 16-1400 U/min table load: max. 4 t weight of the machine ca.: 18 t The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t
used
horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg
used
Transverse slide milling machine with digital display , used milling m/c with vertical head and DRO, used Hersteller/make: HECKERT Typ / model: FQW 400 Baujahr/ year: 1983 Tischgrösse/ table: 400 x 1600 mm Tool holder/ taper: ISO 50 max. table load: 1500 kg Verfahrweg längs / move longit.: 200 ... 1400 mm Verfahrweg quer/ move cross: 55 ... 505 mm Verfahrweg perject / move vertic.: 100 ... 525 mm Spindle speeds: 45 ... 2240 rpm in 18 steps Drive power of the milling spindle | load of spindle: 15 kW Connected load: 21 kW Masse/ weight: 4000 kg
used
spindle diameter: 180 mm x-travel: 5000 mm y-travel: 3000 mm bore spindle stroke: 1000 mm ram stroke: 1000 mm dimension of the ram: 425 x 425 mm spindle taper ISO: 50 spindle turning speed - stepless: 3 - 1600 U/min feed stepless: 0 - 10000 mm/min table surface area: 3500 x 2500 mm table rotating: 360 ° table load: 50 t power capacity: 90 kW rapid traverse: 10 m/min table travel: 2500 mm table height: 1450 mm weight of the machine ca.: 125 t dimensions of the machine ca.: 11x12x6,3 m + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit + chip conveyor + angle clamping plate 2400x1700x1200 mm + mecahincally and electrically in top condition! + The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 180 mm x-travel: 5000 mm y-travel: 3000 mm bore spindle stroke: 1000 mm ram stroke: 1000 mm dimension of the ram: 425 x 425 mm spindle taper ISO: 50 spindle turning speed - stepless: 3 - 1600 U/min feed stepless: 0 - 10000 mm/min table surface area: 3500 x 2500 mm table rotating: 360 ° table load: 50 t power capacity: 90 kW rapid traverse: 10 m/min table travel: 2500 mm table height: 1450 mm total power requirement: kW weight of the machine ca.: 125 t dimensions of the machine ca.: 11x12x6,3 m + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit + chip conveyor + angle clamping plate 2400x1700x1200 mm + mecahincally and electrically in top condition! + The data for this ad was created with ModulMWS - the software solution of LogoTech o ...
used
CNC Heidenhain TNC 426 with handwheel HR 410 X = 3500 mm Y = 2500 mm Z = 1250 mm W = 800 mm Table dimensions 1800 x 2200 mm Spindle diameter 130 mm Max. spindle speeds 2500 RPM External coolant 2-axis manual milling head TOS HUR 50 year 2004 almost unused.
used
Dowel drilling machine Brand: Ayen 21 spindle, grid 32 mm drilling head swivable 90° workpiece clamping with 3 pneumatic cylinders triggering clamps and drilling head through foot pedal clamps are moveable support table with integrated measuring scale as well as two-sided straightedge extension each one incl. a stop drilling motor: 2,2 kW Note: The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.
used
x-travel: 2000 mm y-travel: 2000 mm z-travel: 1400 mm spindle stroke: 1000 mm turning speeds: 5-800 U/min Radial face slide: 700 mm Radial face slide: 2,2-115 U/min spindle taper ISO: 50 table surface area: 2000x1800 mm Table load: 14000 kg total power requirement: 42 kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x4,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used