boring used for sale

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sr. No.: 801831

spindle diameter: 125 mm x-travel: 4000 mm y-travel: 2500 mm z-travel: 7000 mm taper ISO: ISO 50 P.D.B. total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill stand Manufacturer Neuhauser Type Connector 12S1 Year of construction 1999 Table size approx. 1 m x 0.50 m Total height approx. 1.80 m Holder approx. 42-43 mm The drill is not one of them Arm can be swivelled on both sides Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out. A forklift/crane for loading is available. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. ...

table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1.250 mm table rotating: 360 Grad table positioning: 4 x 90 ° feeds - longitudinal: 0,63 - 2.000 mm/min total power requirement: 4 kW weight of the machine ca.: 7,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall  ...

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m Universal milling head Heidenhain D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1800 mm table load: 12,5 t total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power ...

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

X : 2600 mm Y : 1700 mm Z : 2000 mm Table size : 1800 mm x 1600 mm It has been switched to CNC in 2018 Machine has been totally revised in 2019 Delta servo motors and electronic panel is new(2019)

x-travel: 520 mm y-travel: 400 mm z-travel: 450 mm spindle taper ISO: 40 control: TNC 360 coolant tank: l total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 2450x2300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2360 mm y-travel: 1570 mm z-travel: 780 mm w-axis: 410 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Cross1100 mmLongitudinal2600 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight12 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftCabineFull protection cabinSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Rigid table with integrated rotary axis (leftside)Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 kg  ...

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² //  ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 407 / 415 Technical data Table length: 850 mm Table width: 440 mm Number of T-channels: 6 T-channel width: 14H7 mm Distance of the T-slots: 63 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 450 mm Vertical travel (z axis): 400 mm c axis resolution max.: 0.001 ° Table load max.: 500 kg Taper in spindle: 40 ISO Spindle speeds: stepless from: 20 rpm up to: 4500 rpm Spindle nose SK: 40 Feeds (X, Y, Z): 1 - 10000 mm/min Feeds: stepless Rapid traverse:: 10 m/min Vertical quill travel: 75 mm Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 8 kW Total power required: 15 kW Machine´s weight about: 2700 kg Overall dimensions machine: Length: 3100 mm Width: 2850 mm Height: 1930 mm Various  ...

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/ ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-MB Technical data Number of axis total: 3 Table length: 1700 mm Table width: 810 mm Number of T-channels: 5 T-channel width: 22 mm Distance of the T-slots: 160 mm Longitudinal travel (X-axis): 1600 mm Transversal travel (y axis): 815 mm Vertical travel (z axis): 815 mm Distance from vertical spindle to table: 1035 mm Spindle speeds: number (steps) from: 30 rpm up to: 4500 rpm Tool magazine number of tools: 32 Spindle nose: ISO: 50 Tool diameter: 110 mm Tool lenght: 350 mm Max. tool-weight: 15 kg Feeds (X, Y, Z): 1 - 10000 mm/min Rapid traverse:: 15 m/min Milling spindle motor: 18.5 kW Machine´s weight about: 13300 kg Overall dimensions machine: Length: 4488 mm Width: 3448 mm Height: 3250 mm Various acce ...

table length: 4000 mm table width: 3000 mm table load: 60 t total power requirement: 14.3 kW weight of the machine ca.: 48.5 t dimensions of the machine ca.: m Brand: FX Type: 83.300/400 Used machine Digital readout: Heidenhain ND 780 Table length: 4.000 mm Table width: 3.000 mm Table load: 60 T Movement: 2.000 mm Width T-slots: 58 mm (M30) mm Feeding: 4 - 1.500 mm/min Rapid traverse: 4.000 mm/min Power: 14,3 kW Machine weight: 48.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 0i-MD Operating hours: 12673 Technical data Number of axis total: 3 Table length: 2200 mm Table width: 1650 mm Number of T-channels: 9 T-channel width: 22 mm Distance of the T-slots: 170 mm Table load max.: 8500 kg Longitudinal travel (X-axis): 1950 mm Transversal travel (y axis): 2200 mm Vertical travel (z axis): 900 mm Distance from vertical spindle to table: 940 mm Spindle speeds: stepless from: 30 rpm up to: 4500 rpm Tool changer: number of tools: 32 Spindle nose: ISO: 50 Tool diameter: 110 mm Tool lenght: 350 mm Max. tool-weight: 20 kg Feeds (X, Y, Z): 1 - 10000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 12 m/min Rapid traverse: vertical: 12 m/min Voltage 50 Hz 3x: 400 Volt ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-MB Operating hours: 20000 Technical data Number of axis total: 3 Table length: 3200 mm Table width: 1650 mm Number of T-channels: 9 T-channel width: 22 mm Distance of the T-slots: 170 mm Table load max.: 8500 kg Longitudinal travel (X-axis): 1950 mm Transversal travel (y axis): 3200 mm Vertical travel (z axis): 900 mm Distance from vertical spindle to table: 940 mm Spindle speeds: stepless from: 30 rpm up to: 4500 rpm Tool changer: number of tools: 32 Spindle nose: ISO: 50 Tool diameter: 110 mm Tool lenght: 350 mm Max. tool-weight: 20 kg Feeds (X, Y, Z): 1 - 10000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 12 m/min Rapid traverse: vertical: 12 m/min Voltage 50 Hz 3x: 400 Vol ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z80000/80000/80000 mm/minRapid feed X / Y / Z80/80/80 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorPackage Mill / Turn 12,000 rpm, HSK-A100Package Mill / Turn, 12,000 rpm HSK-A100 (Only available for Siemens 840D solutionline) NC-Mill-Turn-table d 1,050 mm  ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 0i-MD Operating hours: 15000 Technical data Number of axis total: 3 Table length: 3200 mm Table width: 1650 mm Number of T-channels: 9 T-channel width: 22 mm Distance of the T-slots: 170 mm Table load max.: 8000 kg Longitudinal travel (X-axis): 3200 mm Transversal travel (y axis): 2000 mm Vertical travel (z axis): 900 mm Distance from vertical spindle to table: 940 mm Spindle speeds: stepless from: 30 rpm up to: 8000 rpm Tool changer: number of tools: 32 Spindle nose: ISO: 50 Tool diameter: 125 mm Tool lenght: 350 mm Max. tool-weight: 18 kg Feeds (X, Y, Z): 1 - 10000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 12 m/min Rapid traverse: vertical: 12 m/min Voltage 50 Hz 3x: 400 Volt ...

The machine is functional and immediately ready for operation XYZ 1500x1000x800

Table size: 1000x700 Travel spindle: 600 mm Precision guaranteed: 5 μm Spindle motor: 7.5 hp. Digital display on all axes: SONY LA10.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 320 Technical data Number of axis total: 4 Table length: 650 mm Table width: 350 mm Number of T-channels: 5 T-channel width: 14H7 mm Distance of the T-slots: 63 mm Table load max.: 250 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y axis): 350 mm Vertical travel (z axis): 400 mm Table load max.: 250 kg Spindle speeds: stepless from: 5 rpm up to: 4500 rpm Swivel range Vertical milling head: +/-90 ° Spindle nose SK: 40 DIN69871 Feeds (X, Y, Z): 2 - 4000 mm/min Rapid traverse: long.: 5 m/min Rapid traverse: transversal: 5 m/min Rapid traverse: vertical: 4 m/min Vertical quill travel: 60 mm Voltage 50 Hz 3x: 400 Volt Milling spindle motor: 5.5 kW Total power required: 15 kVA Machine´s w ...

CNC SELCA 1200 Race X-axis 3200 mm Y-axis 2100 mm Z axis 1000 mm Drilling axis mm 1500 Turntable mm 2000

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Verticla travel (W-axis): 250 mm Drill capacity in steel: 10 mm Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Drill chuck Centering microscop Set of collets

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 425 Technical data Number of axis total: 3 Table length: 900 mm Table width: 530 mm Number of T-channels: 8 T-channel width: 14H7 mm Distance of the T-slots: 63 mm Table load max.: 400 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 450 mm Spindle speeds: stepless from: 10 rpm up to: 6300 rpm Tool changer: number of tools: 22 with double gripper Spindle nose SK: 40 DIN 69871 Pull-Studs: DIN 69872 B Tool diameter: 80 mm Diameter with free adjacent pockets: 130 mm Tool lenght: 300 mm Max. tool-weight: 8 kg Time of tool changing: 5-15 sec Feeds: stepless longitudinal from: 2 mm/min up to: 10000 mm/min transversal from: 2 mm/min up to: 10000 mm/min verti ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Technical data Spindle speeds: up to: 15000 rpm Machine´s weight about: 300 kg Overall dimensions machine: Length: 800 mm Width: 700 mm Height: 1700 mm Various accessories: Lamp

X = 6000 mm Y = 2000 mm Quill = 1250 mm Positioner L = 6000; load capacity 20 tons Year of manufacture/SO/GO: 1979/-/2001

The machine is in good technical condition. Working spindle diameter: 100mm Transverse table adjustment: 1250mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 530M Technical data Number of axis total: 5 Table length: 920 mm Table width: 380 mm Longitudinal travel (X-axis): 505 mm Transversal travel (y axis): 355 mm Vertical travel (z axis): 610 mm Table load max.: 250 kg Spindle speeds: stepless from: 50 rpm up to: 30000 rpm Tool changer: Tool magazine number of tools: 28 Spindle nose: HSK: E50 Feeds (X, Y, Z): 1 - 20000 mm/min Voltage 50 Hz 3x: 400 Volt Total power required: 22 kVA Machine´s weight about: 3750 kg Overall dimensions machine: Length: 2500 mm Width: 2000 mm Height: 2565 mm Various accessories: Dividing attachment 4th and 5th axis: ATS 160 Centre height: 160 mm Electronic hand held control 3D touch probe Renishaw: MP40 Laser tool setting system Se ...

The machine is in good technical condition. Working spindle diameter: 90mm Transverse table adjustment: 1120mm. After agreement, the possibility of testing. Accessories: digital measuring, angles.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: ELEXA E-132 Technical data Number of axis total: 3 Table length: 1250 mm Table width: 400 mm Longitudinal travel (X-axis): 1100 mm Transversal travel (y axis): 440 mm Vertical travel (z axis): 420 mm Table load max.: 2500 kg

The machine is in good technical condition, it is possible to test it by agreement. Work table 1800 x 1800mm. Machine dimensions: 7150 x 6280mm, height 5164mm. Main engine 80kW.

Machine weight: 13400 kg Total power of the machine:: 20 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 4 - 1400 rpm Table clamping surface: 1000 x 1120 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 124 Technical data Number of axis total: 3 Table length: 800 mm Table width: 425 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 400 mm Table load max.: 250 kg Distance from vertical spindle to table: 560 mm Taper in spindle:: 40 SK Spindle speeds: stepless horizontal from: 5 rpm up to: 5000 rpm vertical from from: 5 rpm up to: 5000 rpm Swivel range Vertical milling head: +/- 90 ° Feeds: stepless longitudinal from: 0 mm/min up to: 2000 mm/min transversal from: 0 mm/min up to: 2000 mm/min vertical from: 0 mm/min up to: 2000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 10 m/min Rapid traverse: vertical: 7.5 m/min Vertical quill ...

The machine is in good technical condition. Working spindle diameter: 100m Clamping surface of the table: 1000x1120 By prior arrangement, the possibility of a tour in progress.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 124 Technical data Number of axis total: 3 Table length: 800 mm Table width: 425 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 400 mm Table load max.: 250 kg Distance from vertical spindle to table: 560 mm Taper in spindle:: 40 SK Spindle speeds: stepless horizontal from: 5 rpm up to: 5000 rpm vertical from from: 5 rpm up to: 5000 rpm Swivel range Vertical milling head: +/- 90 ° Feeds: stepless longitudinal from: 0 mm/min up to: 2000 mm/min transversal from: 0 mm/min up to: 2000 mm/min vertical from: 0 mm/min up to: 2000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 10 m/min Rapid traverse: vertical: 7.5 m/min Vertical quill ...

Machine weight: 17500 kg Total power of the machine:: 10 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 7.1 - 1200 rpm Table clamping surface: 1250 x 1250 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 600 mm Spindle speeds: stepless from: 120 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 HP Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1400 mm Width: 1500 mm Height: 2100 mm Various accessories: Tool cabinet Drill chuck Set of drills Set of milling cutters

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 1000 mm Table width: 500 mm Longitudinal travel (X-axis): 800 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 460 mm Table load max.: 500 kg Distance from vertical spindle to table: 559 mm Taper in spindle: 40/M16 ISO Spindle speeds: number (steps): 21 horizontal from: 31.5 rpm up to: 3150 rpm vertical from: 31.5 rpm up to: 3150 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 3000 mm/min transversal from: 1 mm/min up to: 3000 mm/min vertical from: 1 mm/min up to: 3000 mm/min Rapid traverse: long.: 6 m/min Rapid traverse: transversal: 6 m/min Rapid traverse: vertical: 4 m/min Vertical quill travel: 110 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 10.8 HP Machine´s weigh ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 20-F Operating hours: 3430 Technical data Table length: 800 mm Table width: 300 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y axis): 300 mm Vertical travel (z axis): 360 mm Taper in spindle: 30 ISO Spindle speeds: stepless vertical from: 0 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 5.0 HP Total power required: 15 kW Overall dimensions machine: Various accessories: Dividing attachment: W 20 with teilstock Electronic hand held control Full splash cabin Set of cutter arbors Coolant system Automatic central lubrication Tool cabinet Interface serial port RS 232

The machine is in good technical condition. Working spindle diameter: 90mm Transverse table adjustment: 1120mm accessories for the machine include a column crane A tour is possible by prior arrangement.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 300 mm Table width: 260 mm Longitudinal travel (X-axis): 150 mm Transversal travel (y axis): 225+50 ATC mm Vertical travel (z axis): 200 mm Table load max.: 80 kg Distance from vertical spindle to table: 140 ~ 340 mm Taper in spindle: HSK-E32 Spindle speeds: stepless vertical from: 100 rpm up to: 30000 rpm Tool changer: number of tools: 17 Rapid traverse:: 30 m/min Milling spindle motor: 3.0 / 4.5 kW Total power required: 12 kVA Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1750 mm Width: 600 mm Height: 1800 mm Various accessories: Handwheel electroinic Full splash cabin Coolant system: 120 ltr. Tool changer: (number of tools): 17 Automatic setting tool: BLUM Z-Pico Interface: ...

This TOS WHN 13.4A from Czech Republic was manufactured in 1985, is operated through a Heidenhain 355 control unit. It is equiped with 4 axis.