boring used for sale

Heidenhain TNC 426 Table 1600 x 2000 mm Max. load 12.500 kg Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 3,500 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,250 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Facing head Ø 720 mm Facing head slide travel 240 mm Machine weight 31,1 ton

Control Heidenhain TNC 426 Mach.no. 11648 Table 1,600 x 1,250 mm Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 2,000 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,050 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Machine weight 26,3 ton

Condition: Very good condition

Control Heidenhain TNC 355 Spindle diameter Ø 130 mm Horizontal Spindle Travel (W) 800 mm Taper ISO 50 P.D.B. Table 1,600 x 1,800 mm Max. load 12 Ton Cross travel (X) 3,500 mm Vertical travel headstock (Y) 2,000 mm Longitudinal travel (Z) 1,250 mm RPM 5 – 1,100 kW 32 Volts 400 Cycles 50

: Viele MK Aufnahmen taper MK: 40 taper MK: 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 400 mm, 400 mm

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 320 Year of Make: 2001 Travel: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X, Y, Z axis Splash guard cabin Machine Light 4 Height Adjustable Machine Shoes Coolant Setup Operating instructions

WE OFFER AN STUNNING EXCELLENT CONDITION WOTAN CNC RAPID 1 WITH HUGE AMOUNT OF OVER 400 TOOLINGS, FOR A SPECIAL WORK. WORKING HOURS: POWER ON: 13692 PROGRAM RUN: 4650 SPINDLE RUN: 4690 AXIS TIME: 4568 HYDRAULIC TIME: 12702 MACHINE HAVE HEIDENHAIN 530 CONTROLS TECHNICAL DETAILS: SPINDLE SPEED : 6,3-1600 U/Min SPINDLE MOVE : Y AXIS : 1250 mm DRILLING SPINDLE MOVE: Z AXIS: 600 mm W : 1000 mm X : 2000 mm B: 360.000 DEGREE SPINDLE DIAMETER: 105mm TOOL HOLDER: ISO 50 WITHOUT TOOL CHANGER CLAMPING: HIDRAULIC MAX TABLE LOAD: 6000 KG TABLE: 1120 X 1400 NUT -BILD 7 ; 22H7 INDEXING 4 X 90 DEGREE TOTAL WEIGHT: 16000 KG DIMENSION OF MACHINE: LENGHT 4800 X BREIT 4665 X HEIGHT 4200

Inv. Num. : 8054 Type: HYDROPTIC 6 Producer: SIP Generated: Parameters: Work table length: 1100 mm Work table width: 842 mm Maximum spindle speed: 2000 1/min Maximum table load (even): 1000 kg X-axis travel: 1000 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Spindle power: 6 kW Machine height: 3205 mm Machine length: 3280 mm Machine width: 2335 mm Machine weight: 10000 kg

1x CNC Table Boring Machine Manufacturer: TOS Type: WHQ Year of Make:1997 Control: Heidenhain TNC 426 in 5-axis X-axis 2000mm Y-axis 1400mm Z-axis 1250mm W-axis. 710 mm B-axis 360 degrees Spindle diameter : 112mm Spindle mount: ISO 50 Spindle speed max: 2000 rpm Table clamping surface: 1400x 1600mm Tool changer: 60 places Chip Conveyor: Yes

Working area: 6000 x 1000 x 3000 mm (max stroke) Rotary table: 2000 x 2000 - load capacity: 15000 kg Max working feed: 5000 mm/min Max rapid feed: 8000 mm/min Fixings: ▪ Nose: 3000 rpm ▪ Universal Head: 3000 rpm Control: Selca 3045 PD

RACING Longitudinal travel of the X-axis mast 16,000mm Vertical travel of the Y-axis head 3,000mm Z-axis head transverse travel 1,250mm Cross stroke boring spindle W axis 700mm HEAD DIMENSIONS 410 X 505mm MANDREL Boring spindle diameter 140mm ISO 50 spindle attachment Spindle rotation speed: 5 – 3,000rpm ADVANCES Continuous working axes X, Y, W, Z 0.5 – 6,000mm/min Fast X, Y, Z axes 18,000 mm/min Rapid W axis 10,000mm/min Working thrust 2,000kg ENGINE POWER: Spindle motor in continuous service (S1%) (AC) 42 Kw Axis feed motors (AC) 50 Nm Auxiliary engines 4.5 Kw Machine in excellent condition.

Working Area: 6000 x 1200 x 3000 (Max Stroke) Max working feed: 8000 mm/min Max rapid feed: 15000 mm/min Fixings: ▪ Indexed head : max rpm: 4000 ▪ Nose: max rpm: 4000 Control: Selca 3045

spindle diameter: 130 mm x-travel: 10000 mm y-travel: 3500 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 workpiece weight: 300 t turning speeds: 1620 U/min spindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kW Plate area: 12000x9600 mm Thickness: 450 mm rotary table:: Colgar type: TRT1500 mm table surface area: 2000x2500 mm Table load: 20000 kg Travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Plate area: 109 m² The floor plate and the table are optional and will be charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mm x-travel: 2100 mm y-travel: 1500 mm z-travel: 1400 mm Table area: 1750x2000 mm turning speeds: 16-1400 U/min table load: max. 4 t weight of the machine ca.: 18 t The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 7200 mm y-travel: 3800 mm Plate area: 9000x6000 mm digital readout: AEG ram: diameter: 440 mm ram: horizontal adjustment: 1000 mm spindle travel: 1500 mm threading cutting device:: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1000 mm z-travel: 1600 mm Control: Heidenhain type: TNC 410 table surface area: 1000x1120 mm Table load: 3000 kg spindle stroke: 710 mm spindle turning speed range: 4-1600 U/min main drive motor: 13 kW total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1200 mm z-travel: 1500 mm w-axis: 700 mm Table dimensions: 1250x1400 mm number of spindle speeds: 8-1600 Control: Heidenhain TNC 131 total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm travel -x axis: 2000 mm travel -y axis: 1200 mm travel -z axis: 1000 mm spindle stroke - max.: 500 mm table surface area: 1250 x 1250 mm table rotating: 360 ° max. table load: 8000 kg spindle taper ISO: 50 spindle turning speed range: 30 - 1300 U/min feeds: 2 - 1000 mm/min rapid traverse: 6 m/min drive capacity - spindle motor: 14 kW coolant: voltage: 380 V control: Bosch1-OSA One direction thrust bearing: total power requirement: 15,0 kW weight of the machine ca.: t dimensions of the machine ca.: 4,20 x 3,00 x 3,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 1900 mm w-axis: 1100 mm radial face slide travel: mm table adjustable: 1000 mm digital readout: Pfillips workpiece: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 2100 mm spindle taper ISO: 50 spindle turning speed range: 5-1000 U/min spindle travel: 900 mm Radial face slide: 650 mm radial face slide travel: 250 mm angular milling head: rotary table:: table surface area: 2000x2500 mm table height: 800 mm table travel: 1700 mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Table, Floorplate, tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 1950 mm y-travel: 1600 mm w-axis: 1000 mm spindle turning speed range: 5,6 - 1120 (27x) U/min table load: max. 5-8 t voltage: 380 V total power requirement: 25 kW weight of the machine ca.: . t dimensions of the machine ca.: 1400 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 80 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 815 mm Spindle travel: 450 mm spindle taper ISO: 40 Radial face slide diameter: 498 mm table surface area: 1000x800 mm digital readout: coolant: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12000x6000 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 2000 mm y-travel: 1200 mm z-travel: 1000 mm w-axis: 500 mm control: Heidenhain type: TNC 155 turning speeds: 20-2000 U/min spindle taper ISO: 50 table surface area: 1100x1300 mm angular milling head: Feed: 0-5000 mm/min Rapid movement: 8000 mm/min workpiece weight: 3000 kg spindle motor: 15 kW total power requirement: 27 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 5,3x2,9x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 ( TGL32680 ) Dimensions: 210 x 100 x 85 mm

Boring tool, optional accessories WMW TGL 30-1201 ( TGL30-1201 ) Dimensions: 185 x 120 x 55 mm

Boring tool, optional accessories WMW TGL 32680 ( TGL32680 ) shank: Ø 20 mm Adapter: Ø 8, 10, 12 mm Dimensions: 185 x 120 x 55 mm

Face and boring head NAREX Vhu 80 ( Vhu80 ) holder: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm

Boring tool, plan and boring head PAGUS MK4 Diameter boring rod holder: 25 mm in wooden box used, tested ! Dimensions: 390 x 210 x 230 mm

HBM WHN 13.8 B, new 1986, CNC control system Heidenhain

D'Andrea TA120 Plan Boring Head SK40 S20x2 Cover Fp1 Fp2 Boring Tool Total weight 16.6 kg Lots of accessories, see pictures. Very good used condition. In original wooden crate

Boring tool, special accessory WMW TGL 32680 ( TGL32680 ) TGL 30-1201 shank: Ø 20 mm adapter: Ø 8, 10, 12 mm in wooden box used, tested ! Dimensions: 185 x 120 x 60 mm

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1250 mm z-travel: 1600 mm spindle taper ISO: 50 bore spindle stroke: 710 mm main drive motor: 11 kW turning speeds: 1600 U/min Feed: 4000 mm/min Control: Heidenhain type: TNC 135 T-slot - width: 22 mm T-slot - distance: 140 mm table surface area: 1250x1400 mm Table load: 2500 kg total power requirement: 23 kW weight of the machine ca.: 9,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Scharmann Model: FB 140 Condition: Used Type of Machine: Horizontal Table Boring Machine Plate Size: 1630 × 1300 Table Size: - Control System: Digital Display Spindle Hub: 140 Tool Holder Spaces: - Travel (X, Y, Z): 2000 × 1400 × 1400 Max Weight: 10000 kg Additional Notes: Equipped with Plan Disc Ø700. Find more here - / Contact us at -

spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2000 mm z-travel: 2330 mm spindle taper ISO: 50 bore spindle stroke: 1000 mm turning speeds: 900 U/min Feed: 2500 mm/min Control: Heidenhain type: TNC 131 T-slot - width: 28 mm table surface area: mm Table load: 8000 kg total power requirement: kW weight of the machine ca.: 37,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8153 Type: OP3 Producer: Hauser Generated: Parameters: Work table length: 595 mm Work table width: 320 mm Maximum spindle speed: 3000 1/min X-axis travel: 400 mm Y-axis travel: 250 mm Travel Z axis: 400 mm Spindle diameter: 130 mm Machine height: 1800 mm Machine length: 1350 mm Machine width: 1300 mm Machine weight: 1500 kg Equipment: DRO

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 1600 mm z-travel: 1250 mm Control: Heidenhain type: TNC 426 table surface area: 2000x1600 mm Table load: 12500 kg Rotary table: 360 ° spindle turning speed range: 12-3000 U/min Feed: 1-9999 mm/min Rapid movement: 10000 mm/min total power requirement: 80 KVA weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SKODA WD160B floor type boring mill X Axis 3150 mm Y Axis 2500 mm Z Axis 1600 mm Table 2000x2000 mm Piece weight 20000 kg Spindle diameter 160 mm Max. spindle speed 800 rpm Spindle motor power 75 kW Length x width x height 10000.0 × 5250.0 × 6365.0 Weight 50000 kg New control.

Magnetic swivel table as shown in the pictures. Further information on request

Inv. Num. : 8262 Type: PR 99-20 Producer: Cobalm Created: 2011 Parameters: Axis X: 3400 mm Axis Y: 1900 mm Axis Z: 280 mm Cutting thickness: 200 mm

Manufacturer: Pankoke und Kochsiek, Type: BFA 03, Year: 1988, Drilling supprt from bottom: 3, Groove saw: 1x Horizontal<CRLF>1x Vertikal, Year :1988

Manufacturer: Protool, Type: Bohrm. DRP 8 E, Drilling engine kW: 0,460, FREE TEXT: mit Ständer,

Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,

HBM Wotan WMO B105, CNC control system Siemens 820M

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

TOS ,W 100 , YEAR 1976, SPINDEL MORSEA