1246 offers

maximum number of results exceeded > 1000
please refine your search

Category: 101: boring mills and machining centers
New in: 2001
Price: 79.900 €
Location: Land-de DE Berlin
Seller: KISTNER GmbH & Co.KG

STARRAG HECKERT CWK 630 Horizontal machining center - with approximately 650 piece toolholders SK50! Year of construction: 2001 Control: SIEMENS SINUMERIK 840 D Machine number: 121130 Traverse paths: X - 1000 mm / Y - 750 mm / Z - 835 mm Facilities: Range round pool for 4 pallets (6 in the system) approx. 650 piece toolholders SK50 Table 360 x 1 degree IKZ 50 bar Coolant tanks 900 l External coolant supply Tool Tower magazine with 225 seats Chip conveyor Rinse-gun on the clamping square Closed working space Panel Electronic Handwheel Cleartec sidewall Waterfall shower Measuring probe RENISHAW Tool breakage control by means of laser light barrier Remote diagnosis Pa ...

Category: 101: boring mills and machining centers
New in: 1966
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

spindle diameter: 100 mm x-travel: 1400 mm y-travel: 1250 mm z-travel: 1100 mm ampere: 18,4 A spindle turning speed - stepless: 9 - 1000 U/min spindle taper: 50 bore depth: 700 mm weight of the machine ca.: t dimensions of the machine ca.: m Spindle Ø 100 mm Spindle taper SK 50 Travel of centre sleeve (W Axis) 700 mm Distance from table to middle of spindle, approx. 1,300 mm Table size 1,400 x 1,100 mm Table travel, longitudinal (Z Axis) 1,100 mm Table travel, cross, approx. (X Axis) 1,400 mm Table swivelling 360 ° Max. load on table 1,500 kg Vertical travel of spindle headstock (Y Axis) 1,250 mm 18 spindle speeds in 24 steps 9 - 1,000 rpm Feeds, infinitely variable ...

Category: 205: boring mills, machining centers
New in: used
Price: 125 €
Location: Land-de DE 44532 Lünen, Jägerstr. 15
Seller: MSH-nrw GmbH

Table column drilling machine checked!

Category: 101: boring mills and machining centers
New in: 1984
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features  ...

Category: 205: boring mills, machining centers
New in: 2000
Price: request quote
Location: Land-de DE 32549 Bad Oeynhausen, Zur Bauernwiese 12
Seller: V. Grum-Schwensen GmbH

Technical description: 1 drill unit with 21 spindles - 32 mm grid Swivel drilling unit 2 clamping cylinder

Category: 101: boring mills and machining centers
New in: 1979
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m : : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX S ...

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-de DE Werlte
Seller: RG-Tools GmbH

Fadal VMC 4020 year 2001 Control: Fadal CNC traverse paths X Trail: 1020 mm Y travel: 510 mm Z travel: 510 mm Table size: 1220 x 510 mm maximum table load: 680 kg Spindle retainer: BT 40 spindle speeds: 40-10,000 rpm Drive power - spindle motor: 11 kW Tool changer: 21 times Coolant system: weight approx.: 5 t Space requirement approx.: 3.00 x 2.2 x 2.5 m more features - CNC rotary table dia. 200 mm Sale and error subject

Category: 101: boring mills and machining centers
New in: 1965
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

spindle diameter: 0 mm x-travel: 1400 mm y-travel: 1000 mm z-travel: 900 mm total power requirement: 15 kW Table size, approx. 1,570 x 1,024 mm Max. weight on table, approx. 2,500 kg Table travel, longitudinal 1,400 mm Spindle travel, cross 1.000 mm Vertical travel of spindle quill 300 mm Vertical travel of cross beam 900 mm Distance between table and boring spindle, max. 1.265 mm Distance between the two columns 1,600 mm Max. load on table, approx. 2.500 kg Spindle taper, internal / external MK 4 / Sip 4 e 18 spindle speeds 40 - 2,000 rpm Milling feeds for table, infinitely variable 25 - 500 mm/min 4 milling feeds for boring head 30 - 180 mm/min 6 boring feeds 0.04 - 0.35 mm/r ...

Category: 205: boring mills, machining centers
New in: used
Price: 770 €
Location: Land-de DE 58730 Fröndenberg/Ruhr, In der Liethe 1
Seller: Fritz Ernst Maschinenhandel e K

Used pot band drill Internal number: m2689 Manufacturer Hettich Type of professional Year unknown Power 0.75 kW Speed 2,800 RPM. Operating pressure 9.6 bar Drive 8 spindle side, of which 5 screws in series With extensions and various drills Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. A forklift/crane for loading is available. We reserve the right to a sale. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are r ...

Category: 101: boring mills and machining centers
New in: 1980
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

spindle diameter: 90 mm x-travel: 1250 mm y-travel: 900 mm z-travel: 1000 mm table-size: 1000x1020 mm total power requirement: 20 kW weight of the machine ca.: 10 t Spindle Ø 90 mm Spindle taper SK 40 Spindle sleeve travel (W Axis) 680 mm Table size 1,000 x 1,120 mm Table travel, longitudinal (Z Axis) 1,000 mm Table travel, cross, approx. (X Axis) 1,250 mm Table, swivelling 360 ° Max. load on table 3,000 kg Vertical travel of spindle headstock (Y Axis) 900 mm 18 spindle speeds 9 - 1,120 rpm Feeds, XYZ 18 - 900 mm/min Quick feed, XYZ 3,200 mm/min Spindle drive 20 kW Total electrical load 30 KW - 380 V - 50 Hz Weight, approx. 10,000 kg External mea ...

Category: 101: boring mills and machining centers
New in: 2018
Price: request quote
Location: Land-us US Ohio
Seller: Fermat

Producer . TOS Varnsdorf Year manufacture/Year overhaul . 2018 Diameter of working spindle . 100 mm Travel X-axis . 1600 mm Travel Y-axis . 1120 mm Spindle speed . 71 - 1120 /min. Spindle travel - W axis . 900 mm Travel Z-axis . 1250 mm Spindle taper . ISO 50 . Max. load of table . 3000 kg Machine dimensions l x w x h . 6710 x 3450 x 3000 mm Machine weight . 14000 kg Main motor power . 11 kW Total input . 15 kVA Clamping area of table . 1250 x 1250 mm Face plate diameter . 600 mm Max. diameter of face turning . 900 mm EN: FEATURES: Completely Rebuilt Machine with New Motor and Electrics New 5 Axis DRO Heidenhain New Spindle and Spindle Bearings New Central Lubricatio ...

Category: 102: lathes
New in: 2014
Price: request quote
Location: Deutschland
Seller: BTT Bosetti TechTransfer

standard turning dia.:200 turning length:max. 810 mm control:MSX-711 CELOS (Fanuc 31 IA) greates pass round over bed:800 mm Max. distance between centres:1130 mm bar material dia.:65 mm max. turning diameter:320 mm max. workpiecediameter:300 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45/-65) mm Traverse Y-Axis 3:110 (+65/-45) mm Traverse Z-Axis 1:280 mm Traverse Z-Axis 3:280 mm Traverse Z-Axis 2:820 mm Traverse B-Axis:870 mm Main spindle: turning speed range - spindle:5.000 U/min Spindle 1 Power:25 / 22 kW Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diame ...

Category: 101: boring mills and machining centers
New in: 2002
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

3-axis milling machining centre MIKRON VCP 710 Control: HEIDENHAIN TNC 426 Year: 2002 Tool button system: TS 27 Renishaw Probe: MP12 Renishaw 3D Traverse path x 710 Stroke Y: 550 Stroke Z: 500 Table load max kg: 1600 kg Tool changers: 30 places Spindle retainer: HSK 63 Spindle speed: 20000U/min

Category: 102: lathes
New in: new
Price: request quote
Location: Holland
Seller: GK Werkzeugmaschinen GmbH

turning diameter:220 mm turning length:200 mm control:Fanuc 0i TD mit Manual guide, 10,4\" LCD spindle speeds:4800 1/min. spindle nose:A2- 6 bar material dia.:44 mm C-axis:0,001 ° x-travel:155 mm z-travel:220 mm rapid power traverse in X-and Z direction:20 m/min spindle drive:11/15 KW ( FANUC ßiL12/10000 ) coolant:8 bar Weight approx.:2,4 t Machine size (LxWxH):1560x1450x1760 mm 3-jaw hydraulic chuck:200 mm turret:12-fach, VDI 40 heat exchanger: hydraulic unit:mit Lufkühler chip conveyor with chip bucket: transformator: fully enclosed: CE-design: soft jaw:1 Satz CNC controller:Fanuc 0i TD mit Manual guide, 10,4\" LCD Boring bar holder:2 St. 90°-Halter; 2 Stk. Fräshalter, VDI-40 Tool set ...

Category: 101: boring mills and machining centers
New in: 1978
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 40 mm -Drilling capacity in steel ST 60 50 mm -Spindle mount MT 4 -Drilling spindle stroke 200 mm -12 spindle speeds 35-1400 RPM - throat depth 330 mm -4 feeds 0.1 - 0.15 - 0.2 - 0.3 U/min -Table with 2 T-slots 720 x 560 mm -height-adjustable via rack and pinion with hand crank -maximum distance table - drill bit approx. 720 mm -maximum distance worked base plate - spindle mm 1200 -Lighting -separate coolant system -400 V / 3 kW -Space requirement approx. B H 720 x 2450 X 1000 mm -Weight approx. 650 kg

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-fr France, 68190 Ensisheim
Seller: Retec Machines S.A.S

Category: 101: boring mills and machining centers
New in: 1997
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel 50 mm -Spindle mount Mt 5 -Spindle hub 315 mm -RADIUS min. / max. 350 / 1600 mm -Column diameter 350 mm -max. / min. - distance: - spindle - base plate 650-1230 mm -Vertical lifting of boom 580 mm -16 spindle speeds 25-2000 RPM -Feeds 0.04 3.2 m/U - spindle drive 400 V / 4 kW -Hub drive 1.5 kW -MOT. Central clamping 0.75 kW - cube table - coolant system - space requirement approx. B 2490 x H 2655 x T 1000 mm - weight approx. 3500 kg

Category: 102: lathes
New in: used
Price: request quote
Location: Land-NL Netherlands, 09155 Babberich
Seller: Mach4metal

Table diameter: 3200 mm Turning diameter: 5100 mm Turning height: 2650 mm Motor power: 75 HP/kW Positions ATC: 16   Positions APC: 0   CNC Brand: Siemens CNC Model: Sinumerik System 8 Make CNC Dorries Type CTE 320 / 3400 CNC Siemens Sinumeriek Year 1981 - Ex Aerospace Dorries cte 320 Centre height (mm) Chuck 3200 mm Center distance (mm) Max swing 5100 mm Spindle bore Height 2650 mm Table load 60 Tons Toolchanger 16 Positions Speed 100 Rpm / 6000 feeds  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dörries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 198 ...

Category: 101: boring mills and machining centers
New in: 2003
Price: request quote
Location: Land-de DE 63110 Rodgau, Leipziger Ring 172
Seller: Khajavi-Tai Maschinenvermittlung

TOP machine with Super mass! Hand man UBZ NT-G500/300 13 Year of construction: 2003 5500 X-Y-3200 Z-1500 Spindle: HSK100 at 10,000 rpm HSK 63 at 20,000 rpm Table length: 5000 x 3000 mm Control: Fidia Machine is available on request! See pictures!

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-NL Netherlands, 09155 Babberich
Seller: Mach4metal

Table length: 8000 mm Table width: 1000 mm Longitudinal X: 6700 mm Cross Y: 1050 mm Vertical Z: 1100 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 124 Make Mecof CS 8 Type CS 8 Year 80 er TNC 124 - X - Y - Z Table length (mm)L = 8.000 Table width (mm)W = 1.000 Longitudinal X (mm)X = 6.700 Cross Y (mm)Y = 1.050 Vertical Z (mm) Z = 1.100 Iso 50/15kW/1600 Cycle tapping/hole boring / key seating

Category: 101: boring mills and machining centers
New in: 2002
Price: 12.900 €
Location: Land-de DE
Seller: Czech Industrie Service

Workspace in x 650 mm Workspace in Y: 480 mm Workspace in Z: 510 mm Table size: 800 x 450 mm Speed range: 0 - 8000 RPM - infinitely variable Toolholder: BT 40 Total power consumption: 7.0 / 9,25 KW / 400 V Machine weight: 3500 kg Equipment / Accessories: CNC railway control Siemens 802 D 16 x tool changer Electr. Handwheel Coolant system Pole-reversible motor All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the BAZ before making a purchase in our factory under power.

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-NL Netherlands, 09155 Babberich
Seller: Mach4metal

Table length: 1400 mm Table width: 1400 mm Longitudinal X: 3000 mm Cross Y: 2000 mm Vertical Z: 1000 mm Positions ATC: 60   CNC Brand: Heidenhain CNC Model: i TNC 530 in 5 Axis SPECIFICATIONS X - Travel   3000 mm Y - Travel  2000 mm Z - Travel   1000 mm W - Travel  700 mm bed / plano / portal / moving column   Milling & Boring Controll   iTNC 530 in 5 Axis Table Length x Width   1400 x 1400 mm Table load in kG   5000 Kg Spindle Taper  Iso 50 kW power on spindle  30 kW Spindle speeds / ranges  2200 Rpm ATC tool changer  60 Coolant true spindle / Bar  60 Bar Bar Number off controlled axis   ...

Category: 205: boring mills, machining centers
New in: 1992
Price: 3.529 €
Location: Land-de DE Weilheim Teck
Seller: A-Z Maschinenwelt

Technical data: Brand: Weeke Type: BP05 Year: 1992 Console table with 6 beams, working area XYZ 2,500 x 650 x 50 mm, pneumatically clamped workpiece support, vacuum suction plate with variable size, a 2.5 kW ER 25 spindle with up to 18,000 rpm, drilling unit with 10 vertical individually retrievable spindles and 2 horizontal spindles in the X-direction up to 35 mm diameter, 1 kW Nutsägeaggregat in X direction, weight approx. 2500 kg

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-be BE
Seller: APT International

Used for milling of automotive dies and toolsets by PeugeotElectronics reconditionned in 2003 by Rouchaud-GendronAfter recondtionning around 1000 hours on the clockHeidenhain encoders and rulersNum Servomac motorsMeasurementreports available- 5-axis machine- type FA270-175- ram size: 550 x 550 mm- travel of ram: 1150 mm- dia of spindle: 175 mm- including 2 brackets (one fixed and one mobile)- dimensions of table under the brackets: 4000 x 1000 mm- power on spindle: 75 kWspindledia: 270/175 mmOptional:1 - Sfac turning table 2500 x 1600 mm >> click here2 - 4 floorplates 6000 x 3700 mm >> click here3 - 2 brackets on table >> click hereMilling and boring machine with travelling ...

Category: 103: milling machines
New in: used
Price: 3.499 €
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

A used universal milling machine Manufacturer: Thiel SK 40 with continuous feed with stepless speed adjustment works perfectly, until on the switches... He is ever. Sale without accessories/Vises Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-be BE
Seller: APT International

CNC Borer with movable column - 6 axis simultaneous >> machining of industrial vehicle bodies, boring, drilling, tapping & millingHydrostatic guides - Siemens 840C controlAutomatic changing of table on pallet (2 stations)Weight of machine + turntable: 75 tonCan be dismantled in different pieces for transportX-travel: 5500 mmY-travel: 2000 mmSpindleISO 50 - 37kW - cooling through spindle - 2800 rpmAutomatic CNC indexation on spindleRam size: 300 x 300 mm - Z-travel: 700 mmSpindledia: 160 mm - W-travel: 600 mmTableDimensions: 1650 x 3500 mm - V-travel: 2500 mmmax weight on table: 25 tonTurningspeed: 2,4 rpmfull CNC controlled 360° turnableToolstorage55 tools - max toolweight: 25 kg ...

Category: 101: boring mills and machining centers
New in: used
Price: 799 €
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

Threaded drill Mark WEBO Model G12 Lt table thread M5 - M 14 Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-be BE
Seller: APT International

CNC Borer with movable column - 6 axis simultaneous >> machining of industrial vehicle bodies, boring, drilling, tapping & millingHydrostatic guides - Siemens 840C controlAutomatic changing of table on pallet (2 stations)Weight of machine + turntable: 75 tonCan be dismantled in different pieces for transportX-travel: 5500 mmY-travel: 2000 mmSpindleISO 50 - 37kW - cooling through spindle - 2800 rpmAutomatic CNC indexation on spindleRam size: 300 x 300 mm - Z-travel: 700 mmSpindledia: 160 mm - W-travel: 600 mmTableDimensions: 1650 x 3500 mm - V-travel: 2500 mmmax weight on table: 25 tonTurningspeed: 2,4 rpmfull CNC controlled 360° turnableToolstorage55 tools - max toolweight: 25 kg ...

Category: 101: boring mills and machining centers
New in: 1999
Price: request quote
Location: Land-fr FR
Seller: CNC Management Ltd

Make: DMG Model: DMU 50V 5 Axis CNC Vertical Machining Centre Year: 1999 Condition: Used Machine type: Mill Location of machine: France Machine Details Year of manufacture: 1999, Control: HEIDENHAIN TNC 426, Travels: 500 x 380 x 380 mm, Spindle Speed: 13000 rpm, Auto Tool Changer (ATC): 30 positions, 17000 working hours, Swarf Conveyor not included

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-be BE
Seller: APT International

CNC Borer with movable column - 6 axis simultaneous >> machining of industrial vehicle bodies, boring, drilling, tapping & millingHydrostatic guides - Siemens 840C controlAutomatic changing of table on pallet (2 stations)Weight of machine + turntable: 75 tonCan be dismantled in different pieces for transportX-travel: 5500 mmY-travel: 2000 mmSpindleISO 50 - 37kW - cooling through spindle - 2800 rpmAutomatic CNC indexation on spindleRam size: 300 x 300 mm - Z-travel: 700 mmSpindledia: 160 mm - W-travel: 600 mmTableDimensions: 1650 x 3500 mm - V-travel: 2500 mmmax weight on table: 25 tonTurningspeed: 2,4 rpmfull CNC controlled 360° turnableToolstorage55 tools - max toolweight: 25 kg ...

Category: 101: boring mills and machining centers
New in: 1998
Price: request quote
Location: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

MICRON BAZ universal mod to 600 / 98 / xyz: 600-500-450 / SK 40 cnc HEIDENHAIN TNC 410 / up 8,000 U Min / 0-10,000 mm-min. / hour: 19,800 / the ball screws of the Z-axis was newly made before 8 weeks / 25 tool holder SK 40 DIN 2080 / good condition Fe.gi.Maschinen.SBG.at MICRON of universal machining center mod to 600 / year 98 / xyz: 600-500-450 SK 40 cnc HEIDENHAIN TNC 410 / to 8,000 rpm / 0-10,000 mm-min. / hours: 19,800 / the Z axis ball screw spindle what completely redone 8 weeks ago / OSTEO. 25 tool holder SK 40 DIN 2080 good conditions fe.gi.maschinen.sbg.at

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

Longitudinal travel (X-axis) (mm) 200 Transversal travel (Y-axis) (mm) 200 Vertical travel (Z-axis) (mm) 200 Table length (mm) 400 Table width (mm) 300

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE 65197 Wiesbaden, Flachstr. 11
Seller: Kurt Steiger Werkzeugmaschinen GmbH

Category: 101: boring mills and machining centers
New in: 1993
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

Siemens Sinumerik 840 M / 6 FC 4101-1MA00-Z Longitudinal travel (X-axis) (mm) 710 Transversal travel (Y-axis) (mm) 400 Vertical travel (Z-axis) (mm) 400 Table length (mm) 1000 Table width (mm) 630

Category: 101: boring mills and machining centers
New in: 1998
Price: request quote
Location: Land-sk SK
Seller: Fermat

Product number . 161303 Producer . DMG Year manufacture/Year overhaul . 1998 Clamping area of table . 1250x1000 mm Travel X-axis . 1250 mm Travel Y-axis . 880 mm Travel Z-axis . 800 mm Spindle speed . 0 - 15000 /min. Spindle taper . SK 40 . Cooling through spindle Number of driven axes . 5 Main motor power . 15 kW Machine dimensions l x w x h . 4100x3000x3100 mm Machine weight . 12500 kg Control system Heidenhain . TNC 426 Machine in very good condition, under power, possible to test. Control system: Heidenhain 426 PB Tool changer 30 positions Controlled C os Tilt head: 0/180 ° (H / V) After middle repair: Painted, new gaskets, cleaned conveyor, calibrated table  ...

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

Longitudinal travel (X-axis) (mm) 400 Transversal travel (Y-axis) (mm) 250 Vertical travel (Z-axis) (mm) 250 Table length (mm) 595 Table width (mm) 320

Category: 101: boring mills and machining centers
New in: 1997
Price: request quote
Location: Land-de DE 34134 Kassel, Silberbornstr. 2 c
Seller: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.

gebr. Column drilling machine make ALZMETALL Model AB36SV. No.: 129 year 1997 Spindle mount MT 4 Bore Ã? steel 32 mm Size thread Ã? St. 60 M 30 Throat depth 300 mm Spindle stroke 160 mm Säulen-Ã? 145 mm Table size 500 x 370 mm 4 feed rates 0.1 - 0.4 mm / Rev Spindle speed infinitely variable 100-1600 rpm Engine 1.4 / 2,2 kW Distance spindle - table 107/700 mm External dimensions: Width 615 mm 1060 mm deep Height 1860 mm Weight approx. 470 kg With: Digital display Drilling depth indicator Foot switch

Category: 101: boring mills and machining centers
New in: 1982
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

Longitudinal travel (X-axis) (mm) 400 Transversal travel (Y-axis) (mm) 250 Vertical travel (Z-axis) (mm) 250 Table length (mm) 590 Table width (mm) 320

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Land-de DE 34134 Kassel, Silberbornstr. 2 c
Seller: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.

gebr. CNC milling machining center make MMD Model PreMill V 760L-SN Year 2014 control Siemens 828 D, shop mill, RSR 232 interface Procedures: X 760 mm Y 400 mm Z 400 mm Distance spindle Center and table top 102-502 mm Table size 1270 x 305 mm Maximum work-piece weight 200 kg Spindle speeds up to 8000 rpm-1 Taper DIN 69871 40 Rapid traverse x-Y-Z 12 m / min Feed speed 10 m / min Positioning ±0. 008 mm Number of tools 16 piece Max tool: Ã? 100 mm Length 200 mm Weight 6 kg Spindle motor 7, 0kW Feed motor x-Y-Z 2,3 kW Power supply 12 KVA External dimensions: 2510 mm 2170 mm deep 2390 mm Wei ...

Category: 101: boring mills and machining centers
New in: 1984
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

HAUSER 311 / X,Y,U,C Longitudinal travel (X-axis) (mm) 400 Transversal travel (Y-axis) (mm) 250 Vertical travel (Z-axis) (mm) 250 Table length (mm) 600 Table width (mm) 380

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Engine details Stock number 1105-02517 machine type machining center - vertical make FEHLMANN type Picomax 60 CNC year 2001 control type CNC storage HAGUENAU country of origin Switzerland delivery in the short term, by arrangement of based on cargo from stock, free shipped price on request Technical details x route 505 mm y way 355 mm z path 610 mm Panel TNC 430 HEIDENHAIN table size 380 X 920 mm power - spindle 5 kW spindle speeds - infinitely 18000 RPM coolant system 150 litre drilling capacity in St 50 - in the full 20 mm thread cutting steel M 16 /. ALU M 20 table burden 0.3 t tool changer 24 - fold height adjustment: manual/automatic head 450 mm overall power con ...

Category: 101: boring mills and machining centers
New in: 1977
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

HEIDENHAIN TNC 355 Longitudinal travel (X-axis) (mm) 1550 Transversal travel (Y-axis) (mm) 860 Vertical travel (Z-axis) (mm) Table length (mm) 1180 Table width (mm) 1000

Category: 101: boring mills and machining centers
New in: 2016
Price: 2.480 €
Location: Land-de DE 75038 Oberderdingen
Seller: Weyhersmüller GmbH & Co.KG

Suction hose: Ã? 150 mm Oil drain hose: Ã? 14 mm Voltage: 220V 50 Hz Air volume: 1080 m ³/h Power consumption: 0.4 kW Dimensions machine: 633 X 380 x 856 mm Weight: 46 kg Mint condition no or slight traces use. 2 pieces available

Category: 101: boring mills and machining centers
New in: 1994
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

GE FANUC Series 15 MA Longitudinal travel (X-axis) (mm) 500 Transversal travel (Y-axis) (mm) 300 Vertical travel (Z-axis) (mm) 300 Table length (mm) 600 Table width (mm) 380

Category: 101: boring mills and machining centers
New in: 1997
Price: 21.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

M Machine type machining center - horizontal make MAKINO type A55 year 1997 control type CNC storage location work, under current country of origin JAPAN delivery immediately cargo base from site technical details x way 560 mm y way 560 mm z-way 600 mm pallet size 400 x 400 mm tool changer 40 PCs. Input gauge 0.001 - RPM - spindle 50-14,000 rpm spindle retainer ISO HSK 63 0 control FANUC 16 MB 0 total power 30 kW machine weight 8.6 tons of space approx. 5.2 x 2.1 x 2.8 m additional information MAKINO A 55 year 1997 with CONTROL FANUC 16 MB FULL B-AXIS 2 X PALLET 400 X 400 MAGAZINE 40 SPECIALIST HSK 63 IKZ MI 50 BARS SPAENEFOERDERER

Category: 101: boring mills and machining centers
New in: 1999
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

GE FANUC Series 15 M (6 Axes X,Y,Z,U,C,W) Longitudinal travel (X-axis) (mm) 650 Transversal travel (Y-axis) (mm) 450 Vertical travel (Z-axis) (mm) 450 Table length (mm) 770 Table width (mm) 630

Category: 101: boring mills and machining centers
New in: 2001
Price: 63.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Machine type machining center - universal make HERMLE type C 800 U year 2001 control type CNC storage France country of origin Germany delivery immediately cargo base stock technical details x trail 800 mm y-way 600 mm z trail 500 mm overall power demand 43 kW machine weight about 8.5 tons of additional information CNC controller HEIDENHAIN TNC 430 NC rotary table (4th & 5th axis) El. Handwheel 83-Fach tool magazine places Chip conveyor Coolant system IKZ 20 BARS Technical data / technical details: X way longitudinal / X-travel longitudinal 800 mm Y-way cross / Y-travel cross 600 mm Z-way vertical / vertical 500 mm Z-travel Spindle carrier / spindle taper SK 40  ...

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

CNC 314 / POSELESTA II / (X, Y, Z, W) Longitudinal travel (X-axis) (mm) 400 Transversal travel (Y-axis) (mm) 250 Vertical travel (Z-axis) (mm) 450 Table length (mm) 600 Table width (mm) 380

Category: 101: boring mills and machining centers
New in: used
Price: 9.000 €
Location: Land-it IT 25046 Cazzago san Martino, Via Padana Superiore 65
Seller: Remarketin Way s.r.l,

RADIAL DRILLING MACHINES BRAND 80-2000 MODEL F YEAR 1966 Caser For more information contact us at + 39 030 725026 machinery and vision Monday 8:30 to 13:00 and from 14:00 Friday at 19:00

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

Longitudinal travel (X-axis) (mm) 400 Transversal travel (Y-axis) (mm) 250 Vertical travel (Z-axis) (mm) 400 Table length (mm) 550 Table width (mm) 320

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)