boring machines used for sale

Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring., Circular saw blade diameter: 200 - 840mm, Circular Saw Bore Diameter: from 16 mm, Tooth pitch: 6 - 180mm, grinding path: up to 25 mm, tangential relief angle: 0 to 10 degrees, max. grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding spindle variable: 1600 - 5500 rpm,, Conn ...

Control: Fanuc 310 i, Max bar diameter [mm]: 25, Number of linear axis + C axis: 6 + 2, Spindle speed [rpm]: 10.000, Spindle motor [kW]: 3,7, Z - travel [mm]: 80 | 300, X - travel mm: 50 | 240, Y - travel [mm]: 350 | 120, High pressure coolant: 20 bar, Auto bar loader: FMB Turbo 3-26/3200, Machine weight approx. [kg]: 3.800

- 10-STATION HORIZONTAL AXIS ROTARY TABLE, - bar max. Ø 60 mm;, - workpiece length max. 220 mm., - barr length max. 6.000 mm

SALMON BELLY SLICER, KAJ OLESEN A/S, TYPE TRIM-UNIT Technical description: Serial number: 11-01 Power supply: 3X400 V; 3,0A Bandwidth: 590 mm Dimensions: 2600 mm X 1150 mm x 1300 mm

STUFFER HANDTMANN, TYPE: VF80 AND SAUCE DOSING MACHINE HANDTMANN 6 HEADS Technical description: Stuffer (x2): Handtmann VF 80 (1) ID-1638 TYPE: VF80 10-5N Serial number: 637 Power supply: 380 V, 50 Hz, 9,55 A, 3,55 kW Dimensions: 940 x 900 x 1600 mm (2) ID-1640 TYPE: VF80 N50/35 Serial number: 221 Power supply: 380 V, 50 Hz, 10.85 A, 4 kW Dimensions: 1050 x 700 x 1600 mm Sauce dosing machine, Handtmann ID-1639 Heads number: 6 Dimensions: 2300 x 1050 x 1650 mm

VACUUM STUFFER WITH LOAD LIFTER, HANDTMANN TYPE: VF200B CODE: N80/35 Technical description: Throughput rate: Up to 5.000 Kg/ h Power supply: 380/440 V - 50/60Hz Power: 6,5 Kw Dimensions: 2000 x 1350 x 2200 mm

PORTIONER, HANDTMANN MODEL: GMD99-1 Technical description: Serial number: 1052 Power: 220-240 V / 50-60Hz Pression: 7 bar/100psi Bandwidht: 220 mm Dimensions: 1600 x 900 x 1300 mm

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

STUFFER + PORTIONER WITH SAUSAGE HANGER, HANDTMANN Technical description: Stuffer type: Handtmann VF100B Portioner type: Handtmann AL 242-01 Hanger type: Handtmann 242-16 Power supply: 380-440 V / 50-60Hz https://youtu.be/ZxAf2uRbDf4

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 2 x 2 m No. 2392 Universal tool milling machine HERMLE UWF 801 Working area: 500 x 430 x 400 mm Drive: 3 kW Control: TNC 135 With manual control: Working area 520 x 450 x 410 mm, fixed table 800 x 400 mm Tool holder SK 40 18 spindle speeds from 40 - 2000 1/min Feed stepless x,y 4 - 1600 mm/min z 4 - 1000 mm/min Dimensions 2.3 x 2.3 x 1.7 m Weight 1350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

pressure: - t diameter: 3 mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 1,5 x 2 m rivetting machine Workspace: Ø 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 113 total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 222 m No. 5152 Universal tool milling machine Deckel FP 4 M (K) - 2203 Working area: 500 x 400 x 400 Drive: 4 kW Spindle holder SK 40 / DIN-2080 Speed range 50 - 2,500 min-1 Feed rates 8-630 mm/min stepless Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray Heidenhain TNC 113 Active Digital readout Space requirement approx. 2 x 2 x 2m Weight approx. 1,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 450 mm workpiece length: 600 mm work piece width: 650 mm max. working width: 600 mm number of brushing / polishing units: 1 st. Feed speed: 180 m/min. Max. diameter of brush / polishing rollers: 600 mm motor power per brush / polishing roller: 5 kw control: Siemens S7 total power requirement: 9 kW weight of the machine ca.: 2 x 2 x 2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: - mm workpiece-spindlehead motor: 0,18 kW grinding wheel diameter: ? mm total power requirement: 0,18 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 0,8 0,5 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 300 mm grinding length: 1000 mm centre height: 150 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5 x 3 x 2,2 m No. 4959 Universal cylindrical grinding machine STÖCKEL RSU 100 NC-T Working area: approx. Ø 300 x 1000 Drive: 4/1 kW Electronic handwheel Internal grinding device Coolant device with magnetic separator documentation External grinding spindle Wheel Ø 400 x 50 / 250 x 30 mm 4 kW / max. 1400 mi-1 Internal grinding spindle 1 kW / max. 1400 min-1 Swivel range: - Table : -6° / +10° - Grinding headstock 180° - Workpiece headstock -90° Space requirement approx. 5 x 3 x 2.2 m Transport dimensions approx. 6LM Weight approx. 5.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis 4 / 100 mm threading length: ? mm thread pitch: div. mm accessories:: 4 Schneidköpfe total power requirement: 0,75 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,511,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 450 mm z-travel: 500 mm Control: CNC 332 / TNC 355 total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: ca. 3 x 3 x 2,5 m No. 2213 Universal tool milling machine MAHO MH 800 T Working area: 800 x 450 x 500 (800 longitudinal / 450 vertical / 500 transverse) Drive: 5.5 kW Control: Heidenhain CNC 332 / TNC 355 Universal built-in rotary table Coolant device Chip tray Splash guard half cabin, tool clamp Technical documentation Tool holder ISO 40, Table clamping surface 600 x 900 m, max. table load 500 kg, quill stroke 80 mm Speed range 63 - 3150 rpm Feed rate 1 - 1500 mm/min Rapid traverse: 4.5 m/min Weight: approx. 4 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: - kVA throat: - mm contact pressure capacity: - kp total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 1244 CNC portal spot welding machine PEI PROG-2515 Working area: 2500 x 1500 Siemens control Welding capacity of the butt spot welder 3+3 mm Welding capacity of the gun 2+2 mm Feed rates: X+Y 800 mm/sec, Z: 400 mm/sec, A 120°/sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 3 mm distance between columns: 2540 mm total power requirement: 9 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,5 x 3,5 x 2 m No. 5120 Swivel bending machine FASTI 212 Working area: 2500 x 3 Sheet support behind the machine Space requirement approx. 4 x 4 (2) x 2 m Weight approx. 5.7 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55 mm arm length: 2500 mm workpiece height max.: - mm total power requirement: 8 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 1 x 3 m Radial drilling machine MK 5 Spindle holder MK 5 Speed range 30 - 1500 min-1 Feed rates 0.05 - 0.6 mm/rev Space requirement approx. 3.7 x 1 x 3 m Weight approx. 5 tonnes (estimated) Working range: MK 5 x 2500 Drive: 3.7 / 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 10001150850 mm manual operated rotary table: Ø accessories and equipment:: Absaugung Number of working hours: 600 h voltage: 400 V total power requirement: 0,4 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 222,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3 - 50 mm drawing length: 315 mm working speed: 3 - 15 m/min total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 1 x 1,6 m No. 3327: wedge and keyway drawing machine manufactured by WGW, type NZM 50/330 Accessories: 8 drawing tools: 1 x 8 mm / 2 x 10 mm / 1 x 21 mm / 4 x 22 mm Working speed 3-14.7 m/min Groove width 3 - 50 mm Groove length up to 315 mm Space requirement 1.5 x 1.0 x 1.6 m Weight 800 - 1000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 222 m No. 5124 Universal tool milling machine DECKEL FP 4M Working area: 500 x 400 x 400 Drive: 4 kW Control: 3-axis digital display Heidenhain Spindle holder SK 40 / M16 Speed range 50-2500 min-1 Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray documentation Space requirement approx. 2 x 2 x 2 m Weight approx. 1500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 370 mm z-travel: 350 mm total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m Vertical milling machine Spindle ISO-40, Speed range 48-2100 1/min, feeds 10-1000 mm/min, rapid traverse Space requirement approx. 2.5 x 2.5 m, Weight approx. 2.5 tonnes. Active digital readout Heidenhain TNC-114 Table clamping surface 1000 x 400 mm, Coolant device. Working area: 700 x 370 x 350 Drive: 4/5.5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Dialog / Contour 3 total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 232 m Package price: 3 x DECKEL FP 2 EXW free lorry Stock no: 5267 FP 2 A Contour 3 5268 FP 2 A Contour 3 5290 FP 2 NC Dialogue 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 800 mm z-travel: 800 mm Control: CNC 432 total power requirement: 22 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 5 x 3,70 x 3 m Nr. 2754 Universal bed milling machine MAHO MH 1600 S Spindle SK-50, Speed range up to 4000 min-1 Max. workpiece weight 3000kg 35,000 switch-on hours, 10,0 0spindle hours, Dimensions 5 x 3.70 x 3 m, Weight 16 tonnes. Automatic swivelling milling head, Fixed table 1800 x 980 mm, 36-fold universal tool changer, Internal coolant supply with paper belt filter, chip conveyor, manual control bar. Working area: 1600 x 800 x 800 Drive: 22 kW Control: Philips CNC 432 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 222 m 1 x UWF 700 Digi 3 x UWF 801 TNC 135 + 124 1 x UWF 802 M From stock liquidation, partly not functional / in need of repair Price VHS / against bid The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 500 mm z-travel: 500 mm Control: CNC 432 total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3 x 3 x 2,6 m No. 0052 Universal tool milling machine MAHO MH 700 C Working area: 700 x 500 x 450 Drive: 10 kW Control: Philips CNC-432 Fixed table Fully protected cabin with 3 sliding doors Tool holder: ISO-40. Speeds: 20-3150 min-1 Feed rate: 1-3000 mm/min, rapid traverse 6 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 2 x 2 m No. 4427 Universal tool milling machine DECKEL FP 4 L / 2707 Working area: 1200 x 400 Fixed angle table Control: 3-axis digital display Weight approx. 3.5 tons Space requirement 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 600 mm control: Turn Plus CNC Pilot 3190 total power requirement: 44 kVA weight of the machine ca.: 5 t dimensions of the machine ca.: 6 2,5 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 400 mm grinding width: 250 mm workpiece height: 300 mm total power requirement: ? kW weight of the machine ca.: 2 t dimensions of the machine ca.: 222 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm total power requirement: 4 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2 x 3 x 3 m No. 1859 Universal tool milling machine MAHO MH 800 Working area: 700 x 450 x 450 Universal built-in rotary table 1050 x 627 mm, quill feed gear 0.02-0.2 mm/rev Spindle ISO-40, Speed range 32-1600 1/min, feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min. Cross table movement by hand 225 mm, Table top rotation 360° Table swivels/tiltable +- 30° each. Space requirement approx. 2 x 3 x 3 m, Weight approx. 3.3 tons. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 2 x 2 m Nr. 3287 Universal tool milling machine DECKEL FP 1 Working area: 300 x 160 x 340 Control: Active digital display Drive: 1.5 kW Speed range 2000 rpm Tool holder SK-40 Rigid angled table 210 x 600 mm Documentation Optional / available on request: - Universal table - counter holder - Rotary table Ø 380mm - Dividing head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 160 kg workpiece length: 250 mm diameter: 620 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m Auswuchtwaage für Schleifscheiben und scheibenförmige Prüfkörper Workspace: 620 x 250 Control: max. Prüfkörpergewicht 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm total power requirement: 2,2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 222 m Universal tool milling machine HERMLE UWF 700 Spindle holder SK 40 Speed range 40-2000 min Space requirement approx. 2 x 2 x 2 m Weight approx. 1100 kg For further data see attached PDF Rigid table 700 x 285 Horizontal milling machine vertical - milling head enclosed - partially rep. conditioned Documentation Working area: approx. 410 x 310 x 400 Drive: 2,2 Heidenhain digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 11 total power requirement: 7,5 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 3,5 x 2,5 m No. 4430 Universal tool milling machine Working area: 710 x 600 x 455 mm Drive: 7.5 Control: Dialog-11 control Spindle holder SK 40 Speed range up to 6,300 Fixed table Cabin Coolant container Space requirement see data sheet Weight approx. 5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 220 mm z-travel: 400 mm Control: Dialog 2 total power requirement: 1,6 / 2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,2 m No. 5290 Universal tool milling machine DECKEL FP 2 NC / 2801 Working area: 300 x 220 x 400 Drive: 1.6/2 kW Control: Dialog 2 contouring control Fixed table with chip tray Spindle SK 40 Speed range up to 3150 min-1 Quill stroke 65 + 60 mm Space requirement c.3 x 3.5 m Transport dimensions approx. 2 loading meters Weight approx. 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle cone: MK 1 turning speeds: 200 - 3000 U/min table-size: 300 x 220 mm total power requirement: 520 W weight of the machine ca.: 200 kg dimensions of the machine ca.: 8004001800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,52,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: - mm y-travel: - mm z-travel: - mm total power requirement: - kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,51,52 m No. 2510 Universal milling machine Bridgeport ( type/design ) Working area: table 1300 x 305 Angle milling head with additional angle milling attachment and separate drive motor. Horizontal spindle MK-4, speed range 26-630 min-1, Angular milling head speed range 225 - 3385 min-1 Feed range x/y 8.4-224 mm/min, z 3.1-85 mm/min. Space requirement approx. 1.5 x 1.5 m, Weight approx. 1300 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 665 mm y-travel: 465 mm z-travel: 350 mm weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,11,12,2 m No. 0298 3D measuring machine DEA OMICRON A 001 Working area: 665 x 465 x 350 TROLL - microprocessor system L x W x H 1100 x 1100 x 2200 mm Weight approx. 620 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: - mm x-travel: 1250 mm y-travel: 630 mm Control: Heidenhain TNC 426 / 430 total power requirement: 48 kW weight of the machine ca.: 12 t dimensions of the machine ca.: ca. 5 x 6 x 4 m m CNC jig boring machine / vertical machining centre overhauled in 2000 Spindle ISO 50, speed range 30-3000 min-1 max. torque 522 Nm feeds 3-2000 mm, rapid traverse 10 m/min max. distance spindle nose - table surface 725 mm Projection spindle centre - stand 800 mm. Space requirement approx. 5 x 5 m, Weight approx. 12 tonnes The machine was completely overhauled and modernised in 2000 with digital drives and drives and Heidenhain control Fixed table 1200 x 710 36-fold tool changer, coolant system, the pictured magnetic clamping table is not included in the scope of delivery ! - Working area: 1250 x 630 x 560 Drive: 44 kW Control: Heidenhain TNC 426 PB The data for this ad was created with ...

thread dia.: - mm threading length: - mm throat: ca. 2000 mm total power requirement: 0 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,30,82,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.