1391 offers

maximum number of results exceeded > 1000
please refine your search

Category: 101: boring mills and machining centers
New in: 2002
Price: request quote
Location: Land-de DE 40885 Ratingen, Am Ritterskamp 6
Seller: MSI Elmar Reith

Procedures x 800 mm Y-axis 800 mm Z-axis 800 mm B-axis 360,000 x 0.001 ° ---------------------------------------------------------- Pallet number 2 PalettngröÃ?e 630 x 630 mm maximum work-piece weight of 800 kg ----------------------------------------------------------- Speed 60 m / min Speed range (spindle) 45 12,500 1/min Spindle drive power beo 40% ED 72 KW/460 NM ----------------------------------------------------------- Tool magazine (chain) 50 tool places Tool holder HSK 100 maximum tool length 600 mm Max tool diameter 112/ 228 mm maximum tool weight 25 kg ----------------------------------------------------------- Machine weight approx. 19,00 ...

Category: 101: boring mills and machining centers
New in: 2004
Price: request quote
Location: Land-nl NL 4761 Zevenbergen, Campagneweg 10
Seller: Mamach Machinehandel BV

Pallet size ø 630 x 500 mm. Movement x-Axis 630 mm. y-Axis 765 mm. z-Axis 510 mm. Number of tools in magazine 80 pieces. Maximum spindle speed 12.000 tr/min. Tool taper DIN 69871-40. CNC control Mazatrol PC Fusion CNC 640 SX

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Land-tr TR 43100 Kutahya, Adnan Menderes Bulv. Balikli Mah.Hicret sk.P.Hamit
Seller: Ozbek Machinery Trade

Tunnel Type shot blasting machine Brand: ÖZMAK Manufacture year: 2014 Introduction: 2015 MAK. There are approximately 2.5 years, Now active. Machine is running. Due to the place being sold for

Category: 101: boring mills and machining centers
New in: 2005
Price: request quote
Location: Land-nl NL 4761 Zevenbergen, Campagneweg 10
Seller: Mamach Machinehandel BV

Table size 600 x 425 mm. Number of pallets: 2 Movement x-Axis 550 mm. y-Axis 400 mm. z-Axis 415 mm. Number of tools in magazine 26 pieces. Maximum spindle speed 16.000 1/min. Tool taper HSK-A40. CNC Control BROTHER CNC-B00

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE Bayern
Seller: Khajavi-Tai Maschinenvermittlung

Toyoda FH630 SX horizontal center Machine is purchased until 2015 by show room and gone in use! Control, Siemens 840 D SL (3D simulation tool paths and Progarmsimulation u...) X 1000 Y-800 Z-850 Spindle speed: 14,000 RPM Toolholder: BT 50 Maximum workpiece weight: 1200 kg Tool changers: 60 position Full 4th axis indexed 0.001 degrees! 2 pallets 630 x 630 IKZ, Interior cooling 70 bar Knoll : Weight 20600 Warning machine we from CA. 1/2019 until free. In the interest of privileges to purchase will be acquired by the machine!

Category: 101: boring mills and machining centers
New in: used
Price: 9.375 €
Location: Land-pl PL 58-56 Jelenia Góra, MASZYNERIA SP. Z O.O. 18/13
Seller: MASZYNERIA SP. Z O.O.

WMW BKOZ 800 X 1250 coordination drilling machine. The coordinate drilling machine allows you to process metal materials by drilling, milling and boring. Characteristic data: - table working length: 1250 mm - working width of the table: 800 mm - spindle cone: 4 - drilling diameter: 115 mm - weight: 7500 kg

Category: 101: boring mills and machining centers
New in: 2005
Price: request quote
Location: Land-nl NL 4761 Zevenbergen, Campagneweg 10
Seller: Mamach Machinehandel BV

Table size 2000 x 760 mm. Movement x-Axis 1740 mm. y-Axis 760 mm. z-Axis 660 mm. Number of tools in magazine 30 pieces. Maximum spindle speed 12.000 1/min. Tool taper CAT 40. CNC Control Mazatrol PC Fusion 640 M

Category: 103: milling machines
New in: new
Price: 1.585 €
Location: Land-de DE
Seller: Czech Industrie Service

Table size: 730 x 210 mm Travel in x 500 mm Travel in y: 230 mm Head height: 340 mm Spindle RPM: 100-2080 RPM Tool holder: SK 30 / ISO 30 Stroke: 130 mm Gr. Bohrlstg. in St: 25 mm Gr. Bohrlstg. cast: 32 mm Column diameter: 115 mm Projection: 202 mm Total power: 1.1 KW / 400 V Machine weight: 300 kg Machine dimensions: 1080 x 1010 x 1100 mm Equipment / Accessories: Chuck ISO 30 Chuck recording 1 Weldonaufnahme ISO 30 - ww. 10 / 12 / 14 / 16 / 20 mm massive cast iron design precisely processed cross table with adjustable wedge Rails Speed adjustment by means of v-belts - this smoothness Quill fine adjustment via switchable Handwheel Factory warranty without base A ...

Category: 101: boring mills and machining centers
New in: 2007
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904687 Number: 1 PCs. Manufacturer: SW Type: BA W04-22 Control: Siemens 840 D Year of manufacture: 2007 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 400 mm Travel in Y (775) 500 mm Travel in Z 425 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 14/14/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 80/60 nm Spindle diameter ...

Category: 205: boring mills, machining centers
New in: 1994
Price: 9.500 €
Location: Land-de DE
Seller: Marevi

Machining center Morbidelli author 510 Built in 1994 Working area x 3630 mm Workspace Y 1250 mm Work area Z 200 mm Axes of rotation C-axis 0-360 degrees Feed X/Y max 30 m / min Feed Z 18 m / min 1 milling spindles motor 7,5 kW Max speed 12-18000 RPM Tool clamping system ISO 30 Tool changing stations 10 Drill vertically 29 32 mm Drill of horizontally X 5 + 5 Drill horizontal Y 1 + 1 Console table 8 bars per 3 cleaner Vacuum pump Yes Capacity vacuum pump 100 m³/h Control TRIA 7500 extraction unit 200 mm Air bar 6 Total connection kW 20 Dimensions L x W x H 4800 x 2825 x 2640 mm Weight approx. 3900 kg

Category: 102: lathes
New in: 1984
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Oerlikon Boehringer VDF DNE 820 CNC lathe Year of construction: 1984 main drive: 50kW Maximum torque at the spindle: 3400 NM Speed range: 5.6-1120 U/m Feed speed: 01-5000 mm / min Rapid traverse speed: 5000 mm / min Feed force: plan 10 '000N along 20' 000N (40% ED) Tool system: universal gun and drill bracket Y2iqt2 Quill taper size: 6 Morse Tips length: 3000 mm maximum turning diameter: 840 mm Accessories: Bezel DM 40-315mm / bezel DM 250-500mm / drilling Bock with boring bar DM 140 mm 1000 mm / 3-jaw Chuck DM 370 mm / 4-jaw Chuck DM 800 / div. tool holders / rotor tips Control: VDF B1T

Category: 101: boring mills and machining centers
New in: 1984
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

TOS Varnsdorf Waagerecht-drilling and milling work WHN 13 B Year of construction: 1984 spindle diameter: 130 mm spindle recording: ISO 50 speed range: 1,25-800 RPM. X-axis: 3,500 mm Y-axis: 2,000 mm Z-axis: 1,250 mm W-axis: 800 mm table dimensions: 1800 x 1,600 mm Table load: 12,000 kg rotary table: 360° CNC control: HEIDENHAIN TNC 425 Bdogmoyqxy Axes feed rate: 1-2,000 mm / min rapid traverse rate: 5,000 mm / min. Accessories: additional round table DM 800 mm angle head / additional support sleeve to angular head

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-ch CH 6260 Reiden, Bodenachermatte 1
Seller: Catalano Werkzeugmaschinen AG

Control: HEIDENHAIN TNC 124 Traverse path x/Y/Z 500/ 250 / 160 mm Travel W 480 mm Size (L x W) 885 x 320 mm Maximum table load 250 kg Distance from table - spindle nose 0-605 mm Speed x/Y 1-2000 mm / min Feed speed Z 1-1200 mm / min Tool - quick change system SF 32 RPM infinitely 9200 RPM 5 kW Dimensions (W x D x H) 1850 x 2550 x 2400 mm

Category: 101: boring mills and machining centers
New in: 2017
Price: request quote
Location: Land-tr TR istanbul
Seller: Metalmak GmbH

Sell CNC Portal - machining center AWEa VP2012HS year 2017 x 2,000 mm y axis 1200 mm Z-axis 760 mm Control Simens 828 D Main spindle: Max speed min 10,000 / -1 Max torque 570 NM Tool holder 50 Work table: Table size 2,000 x 1,100 mm maximum table load of 3,500 kg Tool magazine Tool holder BT 50 Max tool diameter 125 / 220 mm maximum tool length 350 mm maximum tool weight 15,0 kg Feeds: Rapid traverse rate (X / Y / Z) 20 / 20 / 20 m / min Feed speed Max 10000 mm / min Total power 40 kVA Machine weight approx. 18.0 t

Category: 101: boring mills and machining centers
New in: 2016
Price: request quote
Location: Land-tr TR istanbul
Seller: Metalmak GmbH

Sell CNC Portal - machining center HURCO DCX 32 i BJ: 2016 X-axis 3,200 mm Y-axis 2,100 mm Z-axis 1,100 mm WinMax mill Ultimotion Hurco control Main spindle: Max speed min 10,000 / -1 -Spindle 60 kW Max torque 570 NM Tool holder SK 50 Pull studs ISO 7388/II B Work table: Table size 3000 x 1,700 mm maximum table load of 11,000 kg Tool Magazine: Number of tool stations 40 pos. Tool holder SK 50 Max tool diameter 125 / 220 mm maximum tool length 300 mm maximum tool weight 15,0 kg Change time tool - 5.0 sec Change time span span - 15,0 sec Feeds: Rapid traverse rate (X / Y / Z) 15 / 15 / 10 m / min Feed speed Max 10000 mm / min Total power consumption 150 kVA Machine w ...

Category: 101: boring mills and machining centers
New in: 2008
Price: request quote
Location: Land-cz CZ 25219 Rudna, Horelicke namesti 1263
Seller: CEE-Machines

The machine is in good technical condition, by prior arrangement, the opportunity to test. 2-spindle vertical CNC machines with rotary table, control Siemens Sinumerik D840, equipped with a skewer and extraction. The machines are equipped with a 2 x 4 axle, 2 loops on the table with hydraulic clamp, 2 loops on the table air terminal control. Clamp hydraulic power units up to 250 bar, the HSK-A63 machine spindles are 12,000 min-1; The machines are equipped with an external and internal cooling system for emulsion and internal cooling of the spindles with a pump up to 70 bar.

Category: 101: boring mills and machining centers
New in: new
Price: 1.185 €
Location: Land-de DE
Seller: Czech Industrie Service

Gr. Bohrlstg. in St.: 30 mm Gr. Thread in St: M 24 Clamping table: 380 x 400 mm (L x W) Spindle retainer: MK 3 Rpm: 180-1620 RPM Stroke: 150 mm Throat depth: 265 mm maximum distance spindle nose Base: 750 mm maximum distance spindle nose - table: 390 mm Column diameter: 100 mm Total power: 1,5 KW / 400 V Machine weight: 230 kg Machine dimensions: 470 x 640 x 1390 mm Equipment / Accessories: Thread cutting function Chuck Chuck recording processed baseplate Machine head adjustable in height Manufacturer's warranty All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to tes ...

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

Radialbohrtisch MAS Kosovit Dimensions Lxwxh: 600 x 750 x 550 mm Tilt: 0 ° - 90 ° This Radialbohrtisch is unused

Category: 101: boring mills and machining centers
New in: 1985
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

Spindle diameter: 90 mm Recording: ISO 40 Speed: 8-1,600 Umd.Min X-axis: 1,100 mm Y-axis: 1,100 mm Z-axis: 1700 mm W-axis: 600 mm 4-axis of digital: AcuRite MillVision Table dimensions: 1,000 x 1,100 mm Rotary table: 360° (B axis) Table load: 2.500 kg max. Equipped with: - a large quantity tools - operating instructions - digital display on X, Y, Z, W

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

Bench drilling machine TNW Drilling capacity: Ã? 16 mm Spindle recording: MK-2 Spindle speed: 480-2,250 RPM. Supply: 380 volts Machine on stand

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

Bench drilling machine IN the Drilling capacity: Ã? 5.5 mm Spindle speeds: 3,000 18,000 rpm. Spindle stroke: 40 mm Table-> spindle max: 155 mm Table: 200 x 200 mm Throat depth: 120 mm Supply: 380 volts Machine weight: 35 kg

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

Bench drilling machine TNW Drilling capacity: Ã? 16 mm Spindle recording: MK-2 Spindle speed: 280-3,300 RPM. Supply: 380 volts Machine on stand

Category: 101: boring mills and machining centers
New in: 1996
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 40 mm -Drilling drilling on 50 mm -Tapping up to approx. M 30 -Spindle mount MT 4 -Drilling spindle stroke 160 mm -Unloading min / max 270 / 1250 mm -Column diameter 280 mm -Stroke of the arms 620 mm -min / max - distance: - spindle - base plate approx. 600-1300 mm -worked base plate clamping surface B 750-1250 mm -12 spindle speeds 25-1440 RPM -6 feeds 0.08 - 0,99 m / U - spindle drive 400 V / 4,0 kW -E - Central clamp - cube table - coolant system - space requirement approx. B 850 x H 2200 x T 1950 mm - weight approx. 3000 kg

Category: 101: boring mills and machining centers
New in: 1985
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 50 mm -Drilling capacity in steel ST 60 55 mm -Spindle mount MT 4 -Drilling spindle stroke 250 mm -9 spindle speeds 60-1205 U/min -4 feeds 0.1 â 0.4 mm / Rev -Throat depth 400 mm -maximum distance table - spindle 650 mm -maximum distance worked base plate - spindle mm 1140 -Table with 2 T-slots 710 x 480 mm -Table height adjustment via rack and pinion with hand crank - table left + right tilt -Drive 400 V / 5,5 kW -Space requirement approx. B 720 x H 2400 x H 1100 mm -Weight approx. 1200 kg -with: - right - left rotation -Coolant system - lighting

Category: 101: boring mills and machining centers
New in: new
Price: request quote
Location: Land-nl NL Enschede
Seller: DutchMach

3E THREAD CUTTING MACHINE TYPE 3E 1100-16A Capaciteit M3-M16 -Electric -Factory bereik 1100 mm -Snelheid 10-350 t / m -Inclusief 7 tappotjes -Exclusive work table (meerprijs work table) DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 101: boring mills and machining centers
New in: 1982
Price: 17.500 €
Location: Land-de DE Thüringen
Seller: WTS Maschinenhandels KG

Control: Conventional Table: 1,000 x 1,100 mm Rotation of the table: 360 degrees Verfahrwerge X-Y - Z: 1,000 1,000 1,000 730 Spindle retainer: MK 5 Speed range: 0-1.760 U/min Feed: up to 1.500 mm / min Connection; 23 kW Weight: 9,100 kg Cabinet: 1000 x 750 x 1700 mm

Category: 101: boring mills and machining centers
New in: new
Price: request quote
Location: Land-de DE
Seller: Czech Industrie Service

Gr. Bohrlstg. in St: 32 mm Gr. Thread: M 20 Spindle retainer: MK 4 Speed range: 85 - 1800 rpm - infinitely variable Stroke: 160 mm Table size: 500 x 420 mm Feed: 0.1 / 0.2 / 0.3 mm / Rev - automatically Throat depth: 320 mm Distance spindle nose - Base: 1180 mm Column diameter: 120 mm Total power: 0,85 / 1.50 KW / 400 V Machine weight: 500 kg Machine dimensions: 965 x 515 x 1920 mm Equipment / other: Automatic drill feeds stepless speed control Digital depth display Keyless drill Chuck processed baseplate Pole-reversible motor high concentricity accuracy less than 0.02 mm precisely adjustable drill depth stop Working table height adjustment via rack and winch All ...

Category: 205: boring mills, machining centers
New in: 1994
Price: request quote
Location: Land-it IT 36066 Sandrigo, Via Piave, 7
Seller: Baldin SRL

Boring machine ZANGHERI & BOSCHETTI model B23K: - head at 23 chucks with fast attachments - boring work from horizontal and 90° bottom vertical - complete of alu fences on front and back

Category: 101: boring mills and machining centers
New in: 2005
Price: request quote
Location: Land-de DE 34134 Kassel, Silberbornstr. 2 c
Seller: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.

gebr. Magnetic drill make fine Model DDsk 672-1 built in 2005 Left and right rotation Spindle mount MT 3 Gr. Bohr-Ã? 32 mm 4 spindle speeds 100 â 150-260-420 RPM Connection 220 V, 900 w With Magnetbohrständer make ELBE model DX 32 220 V connection External dimensions: Width 450 mm Depth 500 mm Height 600 mm Weight approx. 45 kg

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE 57080 Siegen, Schubertstr. 42
Seller: Ralph Rosenthal Maschinenlager

WEBO Gradua 30 gear drill MK3 Speed range 70-1600U/min Automatic feed Right linkslauf

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE 57080 Siegen, Schubertstr. 42
Seller: Ralph Rosenthal Maschinenlager

Csepel RF31 / C radial drilling machine.

Category: 101: boring mills and machining centers
New in: 1989
Price: 550 €
Location: Land-de DE
Seller: Czech Industrie Service

Gr. Bohrlstg. in St.: 30 mm Stroke: 125 mm Rpm: 125-1850 RPM Spindle retainer: MK 4 Throat depth: 260 mm Total power: 2,2 KW / 400 V Machine weight: 150 kg Equipment / Accessories: processed baseplate - allows the clamping of high directly on the base plate All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the machine in advance under power.

Category: 101: boring mills and machining centers
New in: 2011
Price: request quote
Location: Land-de DE 65193 Wiesbaden, Kettelerstr. 5
Seller: TÖRNER CNC Maschinen

Vertical CNC machining center DOOSAN DNM 500 Year 2011 S / No. MV0010-000722 HEIDENHAIN of iTNC 530 control Table size: 1,200 mm x 540 mm X-axis: 1.020 mm Y-axis: 540 mm Z-axis: 510 mm Maximum spindle speed 12,000 rpm SK-40 Toolholder Tool magazine with 30 tool stations Distance spindle nose to table surface 150 â 660 mm Distance spindle nose to column 587 mm Rapid traverse x/Y/Z 36/36/30 m / min Maximum work-piece weight of 800 kg Cooling by means of the spindle, high pressure pump 20 bar Chip conveyors, make LNS Weight 6,500 kg Machine dimensions 3,350 x 2.284 x 2,703 mm CE mark

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE 65193 Wiesbaden, Kettelerstr. 5
Seller: TÖRNER CNC Maschinen

5-axis M/C Gantry type with turning function DECKEL MAHO DMU 200 FD duoBLOCK Mfg. year 2007 Heidenhain Mill Plus iT FD Table size: Ø 1.850 mm movements: X-axis: 1.800 mm Y-axis: 2.000 mm Z-axis: 1.100 mm B-axis: -7° - + 180 C-axis: 360°, 200 rpm Max. workpiece diameter 1.950 mm Max. workpiece height 1.100 mm Spindle motor AC 44 kW Max. spindle speed 6.300 rpm 5XtorqueMaster spindle, 1.550 Nm ATC 60 tools HSK 100 DIN 69893 Max. size borring bar Ø230 mm x 455 mm Max. tool weight 20 kg Coolant th. spindle, 40-80 bar Coolant system Swarf conveyor Spindle run time: 3.900 h

Category: 101: boring mills and machining centers
New in: 2008
Price: request quote
Location: Land-de DE 65197 Wiesbaden, Flachstr. 11
Seller: Kurt Steiger Werkzeugmaschinen GmbH

Table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: MAS BT 40 ISA kl. / gr. Table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kW Electr. Supply: 400 V kW space: 3100 x 2500 x 2750 mm weight: 7500 kg

Category: 101: boring mills and machining centers
New in: new
Price: 350 €
Location: Land-de DE
Seller: Czech Industrie Service

Gr. Bohrlstg. in St.: 16 mm Spindle retainer: MK 2 Rpm: 180-2770 RPM Stroke: 80 mm Projection: 180 mm Total power: 0.37 KW / 400 V Machine weight: 100 kg Machine dimensions: 1620 x 660 x 350 mm Equipment / other: Chuck incl. recording processed baseplate Drill table with rack and pinion height adjustment Drill table 45 ° swivel

Category: 101: boring mills and machining centers
New in: new
Price: 3.990 €
Location: Land-de DE
Seller: Czech Industrie Service

Bohrlstg. in St: 32 mm Gewindeschneidlstg.: Up to M 20 in St Spindle retainer: MK 4 Rpm: 125-3030 RPM Stroke: 155 mm Table size: 500 x 420 mm Throat depth: 320 mm Table clamping surface: 420 x 340 mm Clamping surface of foot: 370 x 370 mm Spindle nose - foot distance: 1120 mm Feeds: automatically 0.1 / 0.2 / 0.3 mm / Rev Total power consumption: 1,0 / 1,2 KW / 400 V Machine weight: 460 kg Machine dimensions: 900 x 600 x 2100 mm Equipment / other: machined base plate for high workpieces clamping Pole-reversible motor Gear head 180 ° swivel simple + fast switching of speed by means of lever highest quietness through hardened, polished in an oil bath item No. Gears elec ...

Category: 101: boring mills and machining centers
New in: 2000
Price: request quote
Location: Land-nl NL 4761 Zevenbergen, Campagneweg 10
Seller: Mamach Machinehandel BV

Pallet size 2000 x 600 mm. Movement x-Axis 2400 mm. y-Axis 700 mm. z-Axis 800 mm. Number of tools in magazine 32 pieces. Maximum spindle speed 14.000 R/min. Tool taper HSK-63 A. CNC control Siemens Sinumeriek 840D

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE Köln
Seller: RG-Tools GmbH

Machine type: Okuma MF 46VA Control: OSP P - 200 M year: 2006 Spindle rotation: 17540 h TECHNICAL data: travel: X-axis: [mm] 762 Y-axis: [mm] 560 Z-axis: [mm] 460 Rapid traverse: (x/Y/Z) [m/min] 40 / 40 / 32 Table size: [mm] 2 x 460 x 760 Speed range: 0-8,000 [1/min] Tool locations: [PCs] 20 Toolholder: BT 40 more features - chip conveyors Mayfran - internal coolant through the spindle (ECC) with high pressure error 15 bar - tool breakage monitoring - DNC DT - connector for connection of dust extraction system - hand shower for workpiece cleaning, printing errors, changes, and Z Wipe sales reserved

Category: 101: boring mills and machining centers
New in: 2002
Price: request quote
Location: Land-de DE 92331 Parsberg, Dr.-Nardini-Str. 11
Seller: Wensauer-Edelstahl-Vertrieb-UG

Machining center defect for repair or for slaughter, mechanically functional X-axis - top limit switch is run over

Category: 205: boring mills, machining centers
New in: used
Price: 290 €
Location: Land-de DE 97941 Tauberbischofsheim, Ernst-Bauer-Str. 3+5
Seller: OCHMANN Holzbearbeitungsmaschinen

Knothole boring machine RAPID, wall model.

Category: 101: boring mills and machining centers
New in: 2001
Price: 19.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

M Stock number 1105-02491 machine type machining center - vertical make HURON type CX 10 year 2001 control type CNC storage location France country of origin france delivery immediately cargo base EX WORK technical details x trail 1050 mm y way 510 mm z-way 510 mm overall power demand 9 kW auxiliary information Electr. Coolant system, technical Unterlagen.SPAENEFOERDERER CNC HEIDENHAIN TNC 430 TABLE 1200 X 5000 MM 8000 U/MIN SK 40 MAGAZINE 20 SPECIALIST

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-bg BG 1408 Sofia, 1, Yanko Zabunov Str.
Seller: MachTechnica Ltd.

Longitudinal travel 400mm Crosstravel 250mm Quill travel 130mm Distance spindle-table 485mm Radius 340mm Table size 700x317mm Spindle speed 200-3000 rpm

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-bg BG 1408 Sofia, 1, Yanko Zabunov Str.
Seller: MachTechnica Ltd.

DRO HEIDENHAIN Table dimensions- working surface 560 x 320 mm X/Y - 400/250 mm Adjusting stroke of spindle head Z axis 400 mm Feed X/Y 1500 mm/min Spindle taper ISO 30 Spindle speed 10-3000 rpm

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-bg BG 1408 Sofia, 1, Yanko Zabunov Str.
Seller: MachTechnica Ltd.

DRO system- MITUTOYO Table surface: 400x630mm Max strokes Longitudinal table stroke (x): 400mm Cross table stroke (y): 250mm Vertical spindle stock stroke (w): 420mm Spindle stroke: 100mm

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-cz CZ 25219 Rudna, Horelicke namesti 1263
Seller: CEE-Machines

Travel X, Y, Z: 720 X 500 X 450 mm The machine is in good technical condition, by prior arrangement, the opportunity to test. 4th integrated axis rotary table in the base table (round cut) 4-axis interpolation or slowed - 5-axis horizontal vertical spindle transfer automatically - GE Fanuc Series 16-M - built-in Haidenhein rulers - internal hard drive - Ethernet-communications - entrance Memory cards - laser tool measurement - Renishaw MP9 workpiece probe (0.001 mm) - heavy of zipper palette - chip Remover - extra emulsion tank 5um filter - HSK 63A - 11kW spindle - 2-speed transmission 10-2950 / 3000-16000 RPM - Threading - 64 tool positions 60 terminals HSK 63A (ea16 ER32 ER40, Weldon, hyd ...

Category: 101: boring mills and machining centers
New in: 2007
Price: request quote
Location: Land-de DE 40885 Ratingen, Am Ritterskamp 6
Seller: MSI Elmar Reith

With pallet storage RS4 Procedures x axis 630 mm Y-axis 800 mm Z-axis 680 mm B-axis 360,000 x 0.001 ° ---------------------------------------------------------------------- Pallet storage 4 pallets Number of pallets in the system 6 pallets Pallet size 500 x 500 mm ---------------------------------------------------------------------- - Tool magazine capacity of 180 tool Tool holder HSK 63 ---------------------------------------------------------------------- - Spindle speed (motor) 18,000 1/min Drive power (100% / 40% ED) 25 / 35 KW ---------------------------------------------------------------------- - Facilities: -CNC control Siemens 840 d powerline -Hydraulic tensi ...

Category: 101: boring mills and machining centers
New in: 2004
Price: request quote
Location: Land-de DE 40885 Ratingen, Am Ritterskamp 6
Seller: MSI Elmar Reith

Horiz. Zweispindliges machining center Two-seat version (changing table) Procedures X-axis 600 mm Y-axis 600(975) mm Z-axis 500 mm Spindle distance 600 mm --------------------------------------------------------------- Pan carrier 0/180 ° Speed range 1/min 1-10,000 Power/torque 2 x 38 KW / 363 NM ---------------------------------------------------------------- Tool magazine Number of tool stations 2 x 40 Tool holder HSK 100 ----------------------------------------------------------------- Rapid traverse x/y/z 45 m / min Dimensions L x W x H 6.6 x 5.1 x 3.8 m Machine weight approx. 20 to -----------------------------------------------------------------  ...

Category: 101: boring mills and machining centers
New in: used
Price: 1.600 €
Location: Land-de DE 71729 Erdmannhausen , Robert-Bosch-Str. 3
Seller: Klema

Machine was until recently still in operation and originates from a reversal of the operation. The price is net, you will receive an invoice. If you have questions you can me like to call 01708344313. We have more machinery resulting from the reversal of the operation, like we sell them all in one post. Shipping is possible by arrangement. Since it's used machines, we can give no guarantee on this.

Category: 101: boring mills and machining centers
New in: used
Price: 2.250 €
Location: Land-de DE 23626 Ratekau, Zeiss-Strasse 24
Seller: Fa. Schönknecht

ALZMETALL Column drilling machine Type 3 ESV Technical data: Type 3 ESV Mount MT 3 Speeds please take the data plate stepless speed adjustment in 2 gears automatic feed Weight 400 kg. A VAT invoice is created for you.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)