We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,596 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Bluthardt, VRB 6/20 Drill with coordinate table, with digital display DRO- 3 axis , Year of construction: 1980, very good condition, to be visited under electricity Adapter SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, clockwise - counterclockwise, Stroke: 200mm, upper part adjustment electr. 500mm Projection : 500, Coordinate table: clamping area 600x400m, X-660, Y-450mm
used
Key data: 560 mm, 500 mm, 400 mm
used milling machine Mikron WF31D Control Heidenhain TNC407 Built in 1998 Switch-on hours 8000 h Spindle speed 4000 rpm Feed rate 2-3000 mm/min Adapter SK40 Removable vertical head Prices plus currently valid VAT (domestic) The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.
used
Description: Boring and Insertion Machine Approx. Onsite Dimension. (l x w x h): 800 x 600 x 630 mm, weight approx.: 20 kg
used
Würth Hand drill G&-5077-M36LJ
used
Description: Serial  , ,Number: 95088 Main engine power: 37kw Spindle speed: 4 to 2000 rpm Nominal spindle speed: 177 rpm Cone : KOMET ABS 125 Outer diameter: 280 MM Strokes: 1600x3500x1500 mm Feeds: 3 to 5000 mm/min Rapid feeds: 10.000 mm/min X: 62/3000Nm Y:58/2000Nm Z: 62/3000Nm Installed power: 125 kva  , weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 14,000 x 5,000 x 4,000 mm
used
This 3-Axis Union TC 110 milling machine, crafted in 2002, is adeptly controlled by a Heidenhain TNC 426 system. It comes with a SIDEPALSA 40-fold tool changer and an SK50 tool holder. The table dimensions are 1250 x 1600mm, and it features movement in X, Y, Z, and W axes measuring 2000mm, 1600mm, 1500mm, and 550mm, respectively. Its spindle supports a diameter of 110mm, enhancing the precision with a nominal torque of 1639 Nm and speeds ranging up to 4000 min^-1. For more information about this Union TC 110 milling machine, reach out to us.
used
Description: main engine power: 3 HP serial number: 6S25 consisting of 5 lower drilling units with 11 + 11 spindles each. Wheelbase 32 mm drilling blocks swivelling from 0 to 90 degrees motor power 3 HP at 2800 rpm each maximum width horizontal drilling 3200 mm minimum width 260 mm 6 vertical pneumatic clamps automatic conveyor group with stop and pneumatic reference squaring device maximum speed 43 m + / min installed power 16,5 kW, 400 V, 50 Hz, 35 amp, 3 phases serial no. 6S25 dimensions in mm: approx. 5000 x 4400 x 2000 , weight in kg: approx. 5000 serial number: 6S25, working width min.: 260 mm, working width max.: 3,200 mm, total power approx: 16.5 kW, Approx. Onsite Dimension. (l x w x h): 5,000 x 4,400 x 2,000 mm, weight approx.: 5,000 kg
new
spindle diameter:110 mm x-travel:1800 mm y-travel:1400 mm z-travel:1400 mm W-axis (spindle longitudinal):600 mm max. table load:5 kg table-size:1250x1400 mm spindle drive:22 kW spindle taper:50 ISO spindle speed:10~3000 1/min Spindle motor torque:1000 Nm rapid speed:(X/Y/Z/W):5/5/5/3 m/min feeds:(X/Y/Z/W): 3/3/3/2 m/min positioning accuracy:0.025/1,000 mm (X/Y/Z), 0.03/600 mm (W) repeating accuracy:0.015 mm (X/Y/Z), 0.025 mm (W) mm total power requirement:50 kva weight of the machine ca.:18,5 t spindle bearing:SKF Scales:FAGOR allen Achsen CNC controller:Siemens/Fanuc/Heidenhain tabel encoder:Siemens Servo motors:in allen Achsen vom Steuerungshersteller
new
:HBM-110L spindle diameter:110 mm x-travel:900 mm y-travel:900 mm z-travel:1400 mm W-axis (spindle longitudinal):600 mm U-axis:Planschieber: 180 mm B-axis (table):360x1 ° table load:5 t table-size:1100x960 mm T-slots:22 Stk. spindle speed:22 Stufen, 8-1000 1/min spindle taper:50 ISO rapid speed:(X / Y / Z / W) 2500 mm/min speed - faceplate:4-200 (18 Stufen) 1/min torqe of face plate:1960 Nm dia of faceplate:600 mm movement of facing slide:180 mm weight of the machine ca.:11500 kg main drive:7,5 kW Machine size (LxWxH):4910x 2454x2750 mm 2-Axis DRO :für X- und Z-Achse (von NEWALL)
new
:HBM-130XL spindle diameter:130 mm x-travel:2000 mm y-travel:1800 mm z-travel:(ohne Gegenhalter) 2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3136 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:10 t table-size:1800 x 1600 mm T-slots:11 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:29300 kg main drive:15 kW Machine size (LxWxH):7030x4665x3800 mm 2-Axis DRO :von NEWALL f. X- und Y-Achse Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position ...
new
x-travel:510 mm y-travel:400 mm z-travel:350 mm table-size:600x400 mm spindle speeds:12000 (Motorspindel) 1/min. spindle drive:5,8 kw spindle taper:30 BBT oder SK rapid traverse in x-y-z axis:60 m/min Tool changer:16 fach weight of the machine ca.:2,8 t CNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) high speed directl spindle motor:12000 1/min inner coolant:20 bar chip conveyor - auger:im Bett Brandnew machine with: 1. CONTROL SYSTEM SIEMENS 828D (10.4" LCD+SHOPMILL) 2. WORKING TABLE SIZE: 600 X 400 MM 3. MAX. TABLE LOAD CAPACITY: 250 KGS 4. SPINDLE SPEED 12.000RPM (DIRECT DRIVEN TYP) 5. SPINDLE MOTOR 5.8 KW (1PH8087) 6. SPINDLE NOSE BBT 30 7. X/Y/Z STROKE 510/400/300 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. ATC CAPACITY 16 TOOLS (DISC TYPE) 10. STANDARD SPLASH GUARD 11. ELECTRICAL CABINET WITH HEAT EXCHANGER 12. COOLANT UNIT 13. MANUAL PULSE GENERATOR 14. RIDGID TAPPING ...
new
spindle diameter:110 mm x-travel:1600 mm y-travel:1000 mm z-travel:1250 mm w-axis:Ausfahren der Spindel: 400 mm B-axis (table):360 x 1° mm Distance table/spindle center:0-1000 mm table load:2,5 t table-size:1000x800 mm T-slot (width-distance-quantity):22H8 x 7 x 100 mm tool taper:50 ISO spindle turning speed - stepless:2 Stufen: 20-1000 1/min feeds:X/Y/Z-Achse: 3-950 mm/min feeds:W-Achse: 3-400 mm/min rapid speed:X/Y/Z-Achse: 2,8 m/min rapid speed:W-Achse: 2 m/min main drive:15 kw (drehzahlgeregelt) feed motors:X/Y/Z-Achse-Servomotoren: 2,9 kW Feed motor:W-Achse-Servomotor: 1,3 kW range L-W-H:3.874 x 4.317x3.715 mm weight of the machine ca.:12 t total power requirement:20 KVA Automatic tool clamping:pneumatisch ball screw in axes:X/Z/W CNC controls from:Siemens/Fanuc/Fagor
new
:HBM-110 | HBM-110L | HBM-110XL spindle diameter:110 mm x-travel:900|1250|1600 mm y-travel:900|900|1200 mm z-travel:1400|1400|1400 mm W-axis (spindle longitudinal):600 mm B-axis (table):360x1 ° table load:5 t table-size:1100 x 960|1250 x 1100|1250 x 1100 mm T-slots:22 mm spindle speed:22 Stufen, 8-1000 1/min spindle taper:50 ISO rapid speed:(X / Y / Z / W) 2500 mm/min speed - faceplate:4-200 1/min torqe of face plate:1960 Nm dia of faceplate:630 mm movement of facing slide:180 mm weight of the machine ca.:11,5|18|20 t main drive:7,5 kW Machine size (LxWxH):5120x3380x3100 mm 2-Axis DRO :für X- und Y-Achse (von NEWALL) CE-design:von TÜV Süd servo motors:von Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor
new
:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mm x-travel:1600|2000|2000 mm y-travel:1400|1800|1800 mm z-travel:2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3200 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:8|10|10 t table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm T-slots:9/11/12 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:22,5|24,5|25,5 t main drive:22 kW Machine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mm PLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower mainten ...
used
x-travel:875 / 630 mm y-travel:500 mm z-travel:500 mm table-size:900 x 528 mm table load:0,4 t control:Heidenhain TNC 426 tool adaptor:SK 40 turning speed range:20 - 7000 U/min rapid speed:15 m/min feed speeds:1 - 12.000 mm/min power requirement:7,5 / 12 kW quill stroke:75 mm no. of tools in the magazine:16 Pos. dimensions:2,40 x 2,03 x 2,11 m weight of the machine ca.:4,8 t Universal machining center / universal milling machine, ATC can be removed, then is x-travel 875mm, el. handwheel, 3D touchprobe, manuals, video per whatsApp possible
used
spindle diameter:105 mm x-travel:2000 mm y-travel:1600 mm z-travel:1600 mm W-axis (spindle longitudinal):700 mm spindle taper: ISO:50 Speed of boring spindles:5 - 2000 U/min. b-axis:360 ° Table area:1200 x 1500 mm workpiece weight:5000 kg feed speeds:2 - 4000 mm/min rapid traverse:6 m/min total power requirement:65 kW weight of the machine ca.:17 t dimensions of the machine ca.:6,5 x 4,6 x 3,9 m CNC HEIDENHAIN TNC 426 working area protection coolant attachment
used
table diameter:1400 mm x-travel:2200 mm y-travel:1200 mm z-travel:1100 mm c-axis:360.000 x 0,001 b-axis:+/- 60 ° w-axis:350 mm distance spindle center to column::1100 mm table load:6 t spindle drive:15 kW Torque:4600 nM spindle turning speed range:10 - 1600 U/min spindle taper ISO:50 no. of tools in the magazine:20 Stück total power requirement:45 kW weight of the machine ca.:30 t dimensions of the machine ca.:5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEMENS 840 D control for 6 axis - tool changer for 20 tools - spindle quill 350 mm as W-axis - rotary table as C-axis - angualar milling head indexable - oil cooler, chip conveyor, hand operating panel.
used
spindle diameter:150 mm x-travel:5100 mm y-travel:3600 mm w-axis:1950 mm z-axis:1000 mm spindle drive:52 kW spindle turning speed range:5 - 1600 U/min spindle taper ISO:50 B-axis (table):0,001 ° table surface area:2500 x 2500 mm table load:30 to workpiece swing dia.:~6000 mm weight of the machine ca.:58 t total power requirement:85 kW dimensions of the machine ca.:10,5 x 8,6 x 6,9 m Machine retrofit and overhouled in 2007 with HEIDENHAIN TNC 530 control - angular milling head - exhauster - coolant device
used
Work spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Largest spring extension 1,600 mm Spindle speed in the range of 0.8 - 630 min-1 Displacements in the range: drilling 0.63 - 2,500 mm / min Milling 0.63 - 4,000 mm / min Power consumption of the spindle electric motor 77 kW Thread: metric 0.5 - 12 mm Whitworth 1 - 28 threads / 1 VERTICAL HEADREST TRAVEL TO STAND 4,000 mm TRAVEL OF THE STAND ON THE BED 5,000 mm BASE PLATE DIMENSIONS 6,400 x 5,100 mm
used
Type: WHN 13A Parameters: 130 mm, 2000 mm Manufacturer: Tos Čelákovice Year of production / SO / GO: 1979 / - / - Description: Heidenhain control system Cross arrangement of beds Four axes + rotary table Retractable working spindle Machine designed for universal engineering production Heidenhain control system Axis strengthening hydraulically Machine parameters: X-axis 3510 Y axis 2040 Z axis 1200 W 800 axis incl. reinforcement, 600 without reinforcement Clamping surface of the table 1800 x 1800. The machine is connected, with the possibility to test. Bearings and damaged wheels must be replaced in the headstock.
used
X-travel: 1200mm, y-travel: 1100mm, z-travel: 1100mm, max. rotational spindle speed: 12,000/min, connected load: 34kW, controls: SIEMENS SINUMERIK 840 D with Shop Mill package, including documentation, B-axis, 70bar high-pressure internal coolant supply, tool holder SK50, BIG PLUS according to ISO 7388/2-A standard, tool changer with 100 tools, pallet changer APC, two pallets 800x800mm with T-slots and reference hole, air filter Losma, chip conveyor and cooling unit. Air filter Losma, chip conveyor and cooling unit, retrofit 2016.
used
Technical Features of this Boring Machine Manufacturer JOHNFORD Model BMC-110 Year 2012 CNC FAGOR 8055-MC Table Table Surface 1.400 x 1.600 mm. Table max load capacity 12.000 kg. Table Rotation (B Axis) Continuous (0.001º) Travels and feeds X axis – longitudinal travel 2.000 mm. W axis – Quill travel 550 mm. Y axis – vertical travel 1.800 mm. Z axis – cross travel 1.600 mm. Spindle nose to table center 550-2.150 mm. Spindle center to table top 0-1.800 mm. Controlled Axis X, Y, Z, W, B X/Y/Z rapid feed 12.000 mm/min W rapid feed 6.000 mm/min Cutting feed axis X/Y/Z/W 1-6.000 mm/min Table revolution – B axis 4 rpm Boring spindle Boring spindle diameter 110 mm. Speed Ranges 2 Turning Speeds 0-3.000 rpm Spindle power 22/25 kW Automatic tool changer Tool selection Bidirectiona Random shortest path Tool magazine capacity 60 Max tool diameter 125 mm. ...
used
CNC Floor Type Boring & Milling Machine PAMA Speedram 1000 Manufactured new in 2008 - with only 4500 program run hours Heidenhain iTNC 530 CNC Control X 13000 mm Y 3000 mm Z 1000 mm W 700 mm Pama NC-Rotary travelling table Table size 2000 x 2200 mm Table load 16 t B-Axis 360°/0.001° with contour milling capability V-Axis table travel 2000 mm Boring spindle diameter 150 mm Spindle taper ISO 50 Spindle drive 37 KW Spindle speeds to 3500 rpm Floor plates Huron type universal head X,Y,Z hydrostatics Optical scales X,Y,Z,V Axes Linear magnetic scale W Axis Coolant through the spindle 30 bar with filtration unit Automatic attachment clamping on the ram PREPARED for ATC Excellent machine condition - Under power - Immediately available
used
Technical data of the used PAMA Speedram 2 boring machine: Spindle diameter: 150 mm Spindle taper: ISO 50 Milling spindle diameter: 254 mm RAM section: 360x400 mm Axes travels: Vertical travel (Y): 3200 mm Column travel (X): 10.200 mm Boring spindle travel (Z): 700 mm Axial stroke of the spindle tube (W): 800 mm Total axes travel (Z+W): 1500 mm Spindle speed: 1600 rpm Feeds rate: Working feeds: 1 + 6000 mm/min Rapid feed (X-Y-Z-W): 10.000 mm/min Power: Spindle motor: 65/40 kW Axis motors (X-Y): 65 Nm/each Axis motors (Z-W): 38 Nm Total power: 105 kW Rotary table: Dimensions: 2000 x 2000 mm Longitudinal travel: 1750 mm Table rotation feeds: 0,001 rpm Rotation feed: 1-1.5 rpm Motor power: 10 hP Max weight on table: 15.000 kg
used
Manufactured by Sverdlov plans (Russia) Year of manufacture 1960/2000 - this machine was completely modernized for company ALSTOM Spindle diameter, mm 110 Spindle cone: Morse 50 Table effective area, mm 1120 x 1250 Max. work piece weight, kg 4000 Spindle speed range, rpm 10...1250 Movement of axis Y/W/Z/X, mm 1000/710/1000/1250 Rapid feed, mm/min 5000 Main electric motor power, kW 11 Total power required, kW 25 Machine dimensions, mm 6100 x 3950 x 3200 Machine weight, kg 17000 Horizontal boring machine is in excellent condition, equipped with DRO and Faceplate.
used
spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
PAMA 200 CNC Floor Type Horizontal Boring & Milling machine Built 1997 / 2013 X=16.000, Y=6.000, Z=1.330, W=830mm Spindle diam. 200mm ISO 50/60 Spindle RPM: 1-680 75HP CNC FANUC 31i-M Table 5.000x5.000mm, X travel 2.500mm max. loading 120 Ton Rotation 360.000° Floorplates 4.000 x 15.000mm Chip conveyor Angle head This machine disassembled end of 2021. It was in a very good condition.
used
The WHN 13.8B CNC boring machine is in good technical condition, HEIDENHAIN control system. The year of GO 2001 Total machine input:: 37 kW Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 2500 rpm Clamping surface of the table: 1800x2200 mm Transverse movement of the table - x-axis: 3500 mm Longitudinal movement of the table - z axis: 1200 mm Vertical table movement - y axis: 2500 mm
used
Technical data of used Schiess Froriep Boring Machine: CNC: Siemens 840 D Maximum transversal travel X axis: 13.770 mm Maximum vertical travel Y axis: 5.000 mm Z axis: 1.780 mm W axis: 950 mm V axis rotating support plane: 2.000 mm Rotating table dimensions: 5.000 x 3.500 mm Fixed table dimensions: 7.500 x 4.300 mm Maximum permissible load on the table: 120 ton Spindle power: 100 kW Spindle revolutions per minute: 710 rpm
used
I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)
used
Description: horizontal floory type boring machine Spindle diameter 125 mm x-travel 5600 mm y-travel 1600 mm z-travel 800 mm Spindle stroke 600 mm Spindle mount ISO 50 Spindle speeds 12 - 3000 rpm Spindle motor 40 kW Rapid traverse speed 15 m/min with CNC HEIDENHAIN iTNC 530 modernized in 2003 Tool changer 60 times Drilling work table RÜCKLE 2000 x 1800 mm max. 20 tons. workpiece weight Clamping plates 3500 x 2000 mm, 2500 x 2000 mm Coolant device z-motion: 800 mm, spindle diameter: 125 mm, x-motion: 5,600 mm, y-motion: 1,600 mm, control: CNC Heidenhain iTNC 530 modernisiert in 2003, table surface area l x w : 2000x1800 mm, spindle taper: ISO 50, turning speed range: 12-3000 rpm, total power requirement: 65 kW, weight approx.: 60,000 kg, Approx. Onsite Dimension. (l x w x h): 12,100 x 4,800 x 3,900 mm
used
Manufacturer: PAMA, Italy Model: AT 130/3 CNC Year of manufacture: 1996 Control: CNC SIEMENS SINUMERIK 828 Condition: Excellent, complete, machine will be equipped with a new CNC control SINUMERIK 828! Location: Machine in our warehouse Rudniki, Poland. Technical details Spindle diameter: ø 130 mm Rotary table: 1600 x 1600 mm Table capacity: 12000 kg X axis travel: 2500 mm Y axis travel: 2400 mm Z axis travel: 750 mm W axis travel: 2030 mm Max spindle speeds: 2200 RPM Main motor Power: 35 KW ATC magazine: 100 pcs Rapid feeds: - X- 10,000 mm/min - Y- 12,000 mm/min - Z- 6,000 mm/min - W – 12,000 mm/min - B – 2 Gear steps 2 ranges Torque in axes: X- 55 Nm; Y- W-B- 37 Nm; Z- 27 Nm Weight: 35 kg Max. tool diameter with all places occupied: 140 Max. tool length: 600 mm Equipment: - 1 psc.Rotary table - ATC for 100 pcs - APC 2 pcs 1600 x 1600 mm - External ...
used
Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms
new
Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 1,5 kW - Gesamtleistung 4,5 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedienung - Sicherheitsreißleine - Abmessungen L=2700, B=2500, H=1760 mm - Gewicht 1500 kg
new
Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 4. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 1,5 kW - Gesamtleistung 6,0 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedie ...
new
Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 2 x 1,1 kW - Gesamtleistung 5,9 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedienung - Sicherheitsreißleine - Abmessungen L=2700, B=2500, H=1760 mm - Gewicht 1500 kg
new
Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 4. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 1,5 kW - Gesamtleistung 6,0 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedienung - Sicherheitsreiß ...
new
Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 4. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 1,5 kW - Gesamtleistung 6,0 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedienung - Siche ...
new
Technische Daten: - max. Werkstückabmessung/Bohrabstand L= 2600 mm, B=672 mm - min. Werkstückabmessung/Bohrabstand L= 200 mm, B= 32 mm - 2 horizontale Bohrgetriebe mit 22 Spindeln, Teilung 32 mm für stirnseitige Bohrungen - 4 vertikale Supporte von unten mit 8 Bohrgetrieben je 11 Spindeln, Teilung 32 mm für flächenseitige Bohrungen, 45Cdrehbar - Bohrgetriebe mit Schnellspannfutter, Schaftaufnahme Durchmesser 10 mm - max. Bohrer FI horizontal 13 mm - max. Bohrer FI vertikal 35 mm - Bohrtiefe horizontal 0 - 60 mm - Bohrtiefe vertikal 0 - 60 mm - Spindeldrehzahl 2840 U/min. - Gesamtleistung 11,8 kW / 400 V, 50 Hz - Arbeitshöhe 950 mm - Einstellung der vertikalen Bohraggregate über digitale Positionszaehler 0,1 mm Genauigkeit - Verfahrung der vertikalen Bohraggregate über Linearführungen mit pneumatischer Arretierung - 8 vertikale Pneumatikspanner - Pneumatiksteuerung über Fußven ...
used
used
used
used
Code 71145 Description Horizontal table borer Make UNION Model BFT 80 / 3-1 Serial number 18301 / 34 Year 1986 Spindle 80 mm Spindle taper ISO 40 Spindle out (W) 710 mm Table 1120 x 1000 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 2500 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Size L x W x H 5500 x 3200 x 2800 mm Weigth 9 ton Accessoiries Facing head Ø 460 mm with 180 mm stroke 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead Condition Machine is in good condition
used
Code 61080 Description Horizontal table borer Make UNION Model BFT 90/3 at Serial number 25 742 Year 1979 ( 1980 in use ) Control Heidenhain TNC 121 Spindle 102 mm Spindle taper ISO 50 Spindle out (W) 710 mm Table 1400 x 1250 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm Weight on table 3000 kg 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 3000 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Accessoiries 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead with 600 mm gap
used
table length: 1500 mm table width: 1500 mm table load: 10 t voltage: 380 V Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: 0 CNC Model: 0 Control: MAZATROL CAM M-2 Technical data Table length: 1240 mm Table width: 550 mm Longitudinal travel (X-axis): 1000 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 660 mm Table load max.: 800 kg Taper in spindle: 40 ISO Spindle speeds: stepless vertical from: 28 rpm up to: 4000 rpm Tool changer: number of tools: 30 Tool diameter: 100 mm Diameter with free adjacent pockets: 130 mm Max. tool-weight: 7 kg Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 5.5 kW Machine´s weight about: 6500 kg Overall dimensions machine: Length: 3000 mm Width: 2920 mm Height: 3200 mm Various accessories: Full splash cabin Coolant system Tool changer: (number of tools): 30
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: 0 CNC Model: 0 Control: MAHO CNC 432 Technical data Rotary table:diameter: 400 mm Longitudinal travel (X-axis): 400 mm cross travel (Z-axis): 350 mm vertical travel (Y-axis): 375 mm Table load max.: 160 kg Taper in spindle: 40 ISO Spindle speeds: stepless horizontal from: 20 rpm up to: 3150 rpm vertical from: 20 rpm up to: 3150 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 9 kVA Machine´s weight about: 1600 kg Overall dimensions machine: Length: 1600 mm Width: 2200 mm Height: 1670 mm
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: 0 CNC Model: 0 Control: MAHO 432 Operating hours: 7002 Technical data Table length: 900 mm Table width: 600 mm Longitudinal travel (X-axis): 800 mm cross travel (Z-axis): 550 mm vertical travel (Y-axis): 500 mm Table load max.: 450 kg Taper in spindle: 40 ISO Spindle speeds: stepless horizontal from: 20 rpm up to: 5000 rpm vertical from: 20 rpm up to: 5000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 4000 mm/min transversal from: 1 mm/min up to: 4000 mm/min vertical from: 1 mm/min up to: 4000 mm/min Rapid traverse:: 6 m/min Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 10 kW Machine´s weight about: 5000 kg Overall dimensions machine: Length: 3000 mm Width: 2200 mm Height: 2100 mm Various accessories: Vice: width: 125 mm In ...
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: 0 CNC Model: 0 Control: PROTO TRAK A.G.E. 3 Technical data Number of axis total: 3 Table length: 1270 mm Table width: 320 mm Longitudinal travel (X-axis): 750 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 610 mm Table load max.: 600 kg Distance from vertical spindle to table: 610 mm Distance from spindle axis to slide ways: 480 mm Taper in spindle: 40 ISO Spindle speeds: number (steps): 2 from: 5 rpm up to: 3600 rpm Swivel range Vertical milling head: -90 / +90 ° Feeds (X, Y, Z): 5 - 3800 mm/min Vertical quill travel: 120 mm Quill feed speed: 0.04 / 0.08 / 0.15 mm/r Drill capacity in steel: 35 mm Threat cutting in steel M: 36 Milling capacity in steel: 80 - 150 cm3/min Boringout: 120 mm Voltage 50 Hz 3x: 415 Volt Milling ...