boring and drilling used for sale

With flipover conveyor in the middle, Including welding trolley, Belt width: 1100 mm, Cooking length: 10000 mm, Heating: thermal oil, 189kW + electric, 128kW, Exhaust: 1000 m³/h, Steam: 3 - 7 Bar, Compressed air: 6 Bar, 12 l/min, Water: 15,4 l/min for belt washer, Power: 3 x 400V, 50Hz, 168kW, Dimensions: 10000 x 2200 x 2450 mm

Terlet Terlotherm Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. This model is special designed for working under higher pressures. Patent under no. 1006155. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 45 liter. Number of scraper rows: 4. Inner vessel: 20 Bar - 200 °C - 45 liter. Jacket: Steam 8 Bar / Water 4 Bar - Steam 175 °C / Water 100 °C - 30 liter. Motor: 5,5 kW - 1.464 / 369 rpm - 400 V - 50 Hz - 10,5 A. Total height: 277 cm., Type of Machine: Scraped ...

MAX DIAMETER 320 , MAX LENGTH 500

A Deckel engraving and copy milling machine is available. Table dimensions X/Y: 350mm/200mm, travel X/Y: 300mm/150mm, machine dimensions X/Y/Z: approx. 1100mm/1300mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.

Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: PEMA, swiveling, hydraulically height-adjustable welding rotator -Type: 1500AHM -Load capacity: 15000 N -Control: with remote control -Base plate: Ø 850 mm -Speed: 0.02 - 1.6 rpm Right/Left rotation -tiltable: hydraulically -Height adjustment: hydraulic -Transport dimensions: 850/1650/H970 mm -Weight: 820 kg

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

Dough divider / ciabatta plant ZELAIETA, type: Hydrapate TXA-AUT-ROLL -In very good condition- For making bread with a high percentage of 70 - 90% water, such as classic ciabatta, basto, baguette, rustic bread, rustic bread with pointed ends, mini bread, etc. - Ideal for ciabatta due to gentle dough processing and long resting times - Lamination and lengthening of the dough by up to 60% by rolling out in the satellite head with multi-rollers - Programmable control of up to 16 programs - Flexible shaping through precise cutting into rectangles, squares or diamonds with the guillotine - Automatic settling unit on nets, boards or conveyor belts - Dimensions: 7.0 m length x 1.3m width - El. Connection: 400 V, 2.0 kW Condition: Very good, ready to use Viewing and test run are possible.

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg

Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg

Brand new unused flow control equipments ready to sale with a 50% of market value.

Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available -Price: per piece -Dimensions: 2090/5460/H2180 mm -Weight: 2180 kg

flying shears diameter range 8-16 mm cutting length 520-6000 mm speed - meters/min 25-75 diameter range 8-14 mm

diameter range 4-10 mm cutting length 3000 mm speed - meters/min 130

diameter range 5-13 mm cutting length 2000 mm speed - meters/min 21 - 90

diameter range 7-14 mm cutting length 3000 mm speed - meters/min 90

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 120

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 22-71

diameter range 3-10 mm cutting length 1000 mm speed - meters/min 22-71

wire diameter range 10 mm width of band 100 mm feeding length 250 mm

diameter range 1-8 mm cutting length 3000 mm speed - meters/min 13-56

wire diameter range 1,5-7,0mm cutting length 3000 mm speed - meters/min 5-120

wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 5

dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm

dia. range 0,5-2,5 mm width of band 50 mm feeding length 170 mm number of slides 5 punching power 5 to output - pieces/min 225

double wire processing diameter range 0,8-2 mm cutting length 1000 mm speed - meters/min 80

diameter range 3-10 mm cutting length 10-200 mm

diameter range 3-10 mm cutting length 10-130 mm

diameter range 0,2-1,3 mm speed - meters/min 15

diameter range 4-8 mm shaft length under head 40-110 mm output pieces/min 600

diameter range 2-6,35mm shaft length under head 20-175 mm output pieces/min 800 press power >150kN

diameter range 1,7-6,4 mm shaft length under head 4,5-75 mm output pieces/min 1000

vibratory feeder diameter range 12 mm shaft length under head 120 mm output - pieces/min 300

A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Main spindleTechnology:Belt-driven spindleSpeed:4,500 rpmPower (max.):20 kWBar capacity:67 mmWorkpiece clamping:3-jaw chuck, Samchully MH-208BV1Tool holder:Technology:12-station turretTool holder:BMT45Tool drive:5,000 rpmTravel in X/Y/Z:175/-/350TailstockTechnology:Manual adjustmentTubus stroke:80 mmTubus diameter:65 mmMount:MT4Features/Accessories:Chip Management:Chip ConveyorCoolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 barAutomation:PreparedFinished Parts Removal:Parts Catcher with Collection Box

Index R 200Year of manuf. : 2011 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2011Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

Key data: 420 KW, 400 V

Sokratherm Gas CHP GG402H Gas electricity and heat generators from 2016, approx. 25,000 operating hours, with circuit, heat exchanger and silencers. 405 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 47.2L9 C 6/4, 600 KVA Manufacturer: Sokratherm Model No.: GG402H Type: Natural Gas CHP Serial Number: F160137 Engine: MAN E2842LE322 Engine power [KW]: 420 Electrical power [KW]: 405 Thermal power [KW]: 538 Gas power [KW]: 1,045 Year of Make: 2016 Operating hours: approx. 25,000 Dimensions LxWxH [m]: 3.80 x 1.50 x 2.30 Total unit weight [kg]: 5,990 AC Generator Leroy Somer LSA 47.2L9 C 6/4 Manufacturer: Leroy Somer Model: LSA 47.2L9 C 6/4 Type: AC Synchronous Generator Serial Number: 331643/2 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 2016 Operating hours: approx. 25,000 Weight [ ...

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., , Type of Machine: Butter Packaging Machine, Capacity: ± 600 Kg/h, Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height, Weight: 250 grams, Machine Weight: 840 kg, Packaging type: Aluminium and Parchment Paper , Motor power: 1,5 kW

Manufacturer: Mydata Model: MY12 Year of Manufacture: 2006 Type of Machine : Pick and Place Machine Condition: Good running condition Software Version: 2.9.14c Heads and Tools - Hydra Head - 21,000 placements - Midas Head - Mount Tools - DVC Camera - 9 Magazine Positions - Tray Wagon Magazine - capacity for 5 JEDEC Trays Active Options - Optical centering - Electrical two pole test - Electrical transistor test - Z High speed - Conveyor HYDRA - HYDRA High Speed - Autoteach - Linescan for Z MYSpeed Included Feeders and Magazines - 7x Mydata L-014-000IC - Tape Magazine TM8C (Original, Tested) - 1x Mydata L-014-0002C - Tape Magazine TM12C (Original, Tested) - 1x Mydata L-014-0400C - Tape Magazine TMC Flex (Original, Tested) - 2x Mydata L-014-0418 - Flex Feeder 2 x 16 mm (Original, Tested) - 1x Mydata L-014-0419 - Flex Feeder 1 x 24 mm (Original, Tested) - 1x Mydata L-014-0016 - Vi ...

Kieserling WRUW1 bar straightener for 5 -30mm bar diameters. Speed 40m/min. New set of spare straightening rolls

Complete packing line for liquid/gel products in sticks, comprising: Inever PH6/8 - 8 lane stick pack machine with 8 rotary piston pumps, currently set up for sticks of 23mm width and max. 160mm length, with filling volume of 10 – 14 ml, with adequate format parts, sticks of 17 to 35 mm width can be processed, reel diameter 600mm, reel width 640mm, fitted with Allen Coding device, electrics 400V/3Ph/50/ 60Hz, power consumption 10kW, required air pressure 6 bar, machine floor space approx. 2200 x 2100mm (WxD), machine height approx. 3100 mm, machine net weight approx. 2850 kg. Enflex ENF11 horizontal intermittent-motion cartoning machine, carton size from 50 x 50 x 15mm to 125 x 180 x 40mm (or 125 x 140 x 60m). Includes pre-folded leaflet inserter, Nordson ProBlue hot-melt unit for glue closure of the carton flaps, output up to 60 cartons per minute, electrics 400V/3Ph/50 Hz, power co ...

The Handtmann VF50 is a smaller sized vacuum portioning machine making it suitable for butchers, pet food producers, small goods producers looking for a reliable and fast way to accurately portioning, straight filling product such as mince& sausage meat, cookie dough as well as being capable of handling a wide range of products. Filling capacity 2,600 kg/h Filling pressure up to 55 bar Portioning and linking capacity: 25 g = 420 port./ min 50 g = 350 port./ min 100 g = 250 port./ min 200 g = 160 port./ min Portioning range: 5 – 100,000 g Hopper Capacity: 80 litres Control system: Digital Monitor Connected load: 4 kW Weight:450kg Dimensions: Width:70 Length: 90 Height: 165

Used Karl Schnell 595SE vacuum stuffer designed for industrial meat processing operations. This machine is used for precise portioning and vacuum filling of ground meat mixtures into casings or containers, helping reduce air pockets and improve product consistency and density. Built with durable industrial components, the 595SE is suitable for sausage production and other processed meat applications in commercial food processing facilities. The vacuum filling system helps maintain product quality and efficiency during high-volume production. in great working order, the loading is for standard loading buggies 400 L capacity. Can ship anywhere

System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg., Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on con ...

Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...

Machine for cartoning glass bottles, for packing the carton packages on trays with subsequent shrink film wrapping., Additional title: Five‑step machine, Capacity: 26000 bo/min when packing 24 x 0.33 litre bottles, Cycle time: 18 cycles/min when packing 24 x 0.33 litre bottles, Formats: Trays with 4 x six-packs or 3 x eight-packs for 0.33 litre bottles, boxes with 20 x 0.5 litre bottles also possible, Features: Tray erector/adhesive application (Nordson ‘Problue Flex’, built in 2021), carton packer, tray packer, shrink film machine, drying tunnel, date coding (best-before date marking)

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities., Additional title: 7 pcs. of vertical, coolable stainless steel tanks, Volume fermentation and storage tanks: 10474 l per piece, Volume wheat beer tank: 8071 l, Volume flotation tank: 12242 l, Material: stainless steel 1.4301, Position: standing on feet, Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute