boring and drilling used for sale

Heat Exchanger – Technical Specifications Tube side (RS): Volume: 60 L Temperature range: -10 to 165 °C Pressure: approx. 16 bar Shell side (MS): Volume: 65 L Temperature range: -10 to 110 °C Pressure: approx. 10 bar Expansion joint: Maximum pressure: 0.9 MPa (approx. 9 bar) Movement: ±6.5 mm Description: Industrial heat exchanger designed for operation under medium to high pressure and temperature conditions. The unit features separate tube and shell circuits with defined thermal and pressure limits, as well as an expansion joint to accommodate thermal expansion and mechanical stress during operation. Auction-ID: A7-46032-7

Heat Exchanger – Technical Specifications General data: Total volume: approx. 300 L Nominal diameter: approx. DN250 Tube side (RS): Volume: 60 L Temperature range: -10 to 165 °C Pressure: approx. 16 bar Shell side (MS): Volume: 65 L Temperature range: -10 to 110 °C Pressure: approx. 10 bar Expansion joint: Maximum pressure: 0.9 MPa (approx. 9 bar) Movement: ±6.5 mm Description: Industrial heat exchanger designed for operation under medium to high pressure and temperature conditions. The unit features separate tube and shell circuits with defined thermal and pressure limits, as well as an expansion joint to compensate for thermal expansion and mechanical stress during operation. Auction-ID: A7-46032-8

Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coa ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1000 mm   grinding width: 600 mm   vertical travel: 350 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1360 mm   table surface (front-back): 550 mm   workpiece load (max): 1000 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1000 /min   spindle revolutions (max): 6500 /min GRINDING TOOL   type of grinding tool: wheel   diameter (min): 500 mm   borehole: diameter: 203 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 91 kW   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (GRINDING)   coolant unit: yes - 4500 operating hours - Very good and well-maintained condition - Machine body: Meehanit cast iron - Linear guides - Diamond dressing roller: Ø135x100x52 - Automatic balancing system - Programmable slow, fast,  ...

A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible.

- electr. grooving and perforating machine - with the existing accessoies

cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N  compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area  with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment  - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Working width: 410 mm; Planing shaft: spiral shaft ; Number of knives: 66; dressing table length: 2020 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Display of planing strength: mechanical digital display; Feed speed: 5.5 / 10 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 5.3 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2020 mm; Machine width: 882 mm; Weight: 480kg;

Working width: 510 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2250 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Indication of planing thickness: mechanical counter; Feed speed: 8 / 16 m/min; Feed roller: steel; Pull-out roller: steel; Pressure beams: link pressure bars; Motor power: 7 kW; Engine brake: yes, automatic; Suction port: 150mm; Machine length: 2200 mm; Machine width: 1050 mm; Weight: 900kg;

Working width: 410 mm; Planing shaft: spiral shaft ; Number of knives: 66; dressing table length: 2020 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: electric; Planing thickness display: Digital display; Feed speed: 5.5 / 10 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 5.3 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2020 mm; Machine width: 882 mm; Weight: 480kg;

Working width: 520 mm; Planing shaft: Tersa; Number of knives: 4; Dressing table length: 2300; Dressing stop angle adjustable: yes; folding up the dressing tables: pneumatic; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Indication of planing thickness: digital; Feed speed: 5 / 8 / 12 / 19 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure beams: links; Table rollers: no; Motor power: 5.5kW; Engine brake: yes, automatic; Extraction connection: 120 mm; Machine length: 2300 mm; Machine width: 1100 mm; Weight: 980 kg;

working width: 510 mm; cutter head: Streifenmesser; number of blades: 4; surface table length: 2000 mm; fence tilting: ja; surface table fold up: manuell; maxilum thickness planing height: 230 mm; height adjustment thickness table: electric; read out table height: digital; feed speed: 7 / 14m/min; infeed roller: Stahl; outfeed roller: stahl; pressure beam: durchgehend; table roller: ja; motor power: 5,5 kW; motor brake: ja; suction connection: 160mm; machine legth: 2200 mm; machine width: 950 mm; weight: 800;

working width: 510 mm; cutter head: Strip - Knive; number of blades: 4; surface table length: 2200 mm; fence adjustment: ja; maximum workpiece thickness: 220 mm; height adjustment thickness table: elektrisch; read out for thickness table: Scala; feed speed: 7 / 14m/min; infeed roller: steel; outfeed roller: steel; table roller: ja; motor power: 5,5 kW; motorbrake: ja, automatisch; suction connection: 160mm; machine length: 2200 mm; machine width: 1050 mm; weight: 1050;

working width: 510 mm; cutter head: stripe knife; number of blades: 4; sourface table length: 2250 mm; surface fence adjustable: yes; maximum workpiece thickness: 220 mm; Höhenverstellung Dickentisch: manual; read out for thicknesstable: scala; speeds: 4 / 6,5 / 10 / 16 m/min; infeed roller: steel; outfeed roller: steel; table roller: no; motor power: 5,5 kW; motor brake: yes; suction connection: 120mm; machine length: 2250 mm; machine width: 1100 mm; weight: 800 kg;

Working width: 410 mm; Planing shaft: Tersa knife; Number of knives: 3; dressing table length: 1800 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Indication of planing thickness: mech. counter; Feed speed: 6 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.4 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 325kg;

Working width: 410 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2000 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planing thickness display: Digital display; Feed speed: 6/12 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.5 kW; Engine brake: yes, automatic; Suction port: 120mm; Machine length: 2000 mm; Machine width: 882 mm; Weight: 615kg;

Working width: 630 mm; Planing shaft: strip knife; Number of knives: 4; dressing table length: 2200 mm; Dressing stop angle adjustable: yes; folding up the dressing tables: manual; maximum clearance thickness planer: 220 mm; Height adjustment thickness table: electric; Indication of planing thickness: Scala; Feed speed: 7/14m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: articulated; Table rollers: yes; Motor power: 7.5 kW; Engine brake: yes, automatic; Suction port: 160mm; Machine length: 2200 mm; Machine width: 1150 mm; Weight: 1250;

Working width: 530 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2300 mm; Dressing stop angle adjustable: yes; folding up the dressing tables: electric; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Indication of planing thickness: digital; Feed speed: 5 / 7 / 9 / 12 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: continuous; Table rollers: no; Motor power: 7.5 kW; Engine brake: yes, automatic; Suction port: 140mm; Machine length: 2300 mm; Machine width: 990 mm; Weight: 850;

Working width: 410 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2000 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Display of planing strength: mechanical digital display; Feed speed: 6 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.5 kW; Engine brake: yes, automatic; Suction port: 120mm; Machine length: 2000 mm; Machine width: 882 mm; Weight: 615kg;

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: An automatic wrapping machine specially designed for bundling and packaging soap bars. Packaging material: The machine processes heat-sealable films from the roll, such as cellophane, polypropylene (PP) or PVC. Speed: up to 80 multipacks per minute; Product length: 75 mm ... 280 mm; Product width: 65 mm ... 120 mm; Product thickness: 25 mm ... 120 mm; Weight: approx. 1500 kg; Connected loads: 380-400 V/ 50 Hz; with control cabinet; Oil-tight steel frame that contains all mechanical movements Technical documentation available more photos on request Loading FREE Truck

Cyklop CI-89 2002

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: 1 wrapping machine/ packing machine for soap Hull number: 6760.217.097 Output: 25 pieces per minute Weight: 950 kg Maximum pressure: 8 bar Feeder: Automatic Infeed Conveyor Loading FREE Truck

KAMA TS 105 / HFS 105 Year 2007 Diecutting and Hotfoil Sheet size : 74 x 105 max. / 33 x 48 min. Cardboard thicknesss: 130 - 1500 g/m² (1.8mm) Max. pileheight feeder : 1150mm Max. pileheight delivery : 880 mm Features: Mabeg Feeder Digital control Sheet allignment KAMA HFS 105 hot foil unit

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

Cardboard boxes 1,200 x 300 x 400 mm and 1,200 x 300 x 200 mm each approx. 150 pieces on a pallet

A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible.

Velcro strap approx. 25 rolls 30 and 50 mm wide

Needle felt and velour rolls 6 rolls 2 m wide, black on paternoster

Auction-ID: A1-46274-12

Including: 1x Heuer vice clamping width 150mm, 1x T-slot clamping block, 3x V-block 1x H 450mm 2x H 70mm Auction-ID: A1-45979-217

Diameter 9mm, length 235m Auction-ID: A1-46274-13

Diameter 9mm, length 235m Auction-ID: A1-46274-9

Consisting of: several threaded lifting eyes (swivel eyes), supplemented with a plate clamp and two beam clamps. On 1 pallet. Auction-ID: A1-45979-65

2 UNITS/SETS OF STR0002 PACKED TOGETHER. A SINGLE STR0002 CORRESPONDS TO: Roughness tester for internal and external measurement in unbreakable ABS case 120 x 46 x 68 mm. 3.7 V Lithium rechargeable battery and 220V charger included. Portable roughness tester characterized by high precision, wide range of applications and ease of operation. Recommended for tests of surfaces of all types of metals and non-metals. 128 x 64 Dpi piezoelectric diamond LCD sensor. Memory of 100 groups of measurements. Including reset glass plate. Battery charge indicator. USB data output with PC cable and software included. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 310 x 125 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x STR0002 PACKED TOGETHER: 370 x 62 ...

Speed: from 35 to 3000 rpm Spindle passage: approx. 45 mm Center length: approx. 600 mm Center height above bed: approx. 180 mm Turning diameter over bed: approx. 360 mm Center height above support: 130 mm Turning diameter over support: approx. 260 mm The machine is equipped with a tailstock, a lathe steel holder and a three-jaw chuck from the manufacturer RÖHM, diameter: 160 mm and a two-axis digital display from the manufacturer FAGOR Auction-ID: A7-46287-75

Fully mechanical. Suitable for conifers. Different parts available. 5 rows. Auction-ID: A3-43520-6037

4 overview photos to determine the size of the machine - afterwards photos per floor what happens to the carpet. Starting with the entrance with the pallet truck - here there is a lift in the ground that raises the pallet, a machine operator only has to fold the carpet onto the belt to send to the roll-up machine. Then it is rolled up and pushed to the middle part via hydraulic sliding arm in roll. Once in the middle, you can choose to place the carpet in a plastic packaging with/or without. After packing the roll, we see the end result in the photo (carpets in the end photo purely for illustration purposes and therefore not included, as well as the label printers that are in front of the machine are not included) Machine consists of 2x roll-up line and 1x packaging line. So the first photos are in mirror image the same for roll-up line 2. Auction-ID: A3-43519-16520

These include: first-aid kits, eye washes, safety glasses, face shields, etc Auction-ID: A1-45979-225

Docking station with PowerCom control; sound booth; without the TimBird Auction-ID: A1-43429-77

The oil sprayers 100 ml, 180 ml and 200 ml are ideal for precise dosing of oil during cooking, frying or grilling. Perfect for health-conscious cooks who want to use oil sparingly and purposefully. Modern, elegant design that fits into any kitchen. Fine spray mist for even distribution, easy cleaning The 400 ml pourer is perfect for storing and pouring cooking oil, vinegar, soy sauce or other liquids. Auction-ID: A1-46296-901

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17033

Diameter 11mm, length 230m Auction-ID: A1-46274-23