boring and drilling used for sale

To participate in the auction it is necessary to pay 8,890.00 euros, ask the contact person andrea.bruni@surplex.com for bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-44995-2

To participate in the auction it is necessary to pay 5,400.00 euros, ask the contact person andrea.bruni@surplex.com for bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-44995-3

To participate in the auction it is necessary to pay 14,000.00 euros, ask the contact person andrea.bruni@surplex.com for the bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-44995-1

Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 ...

Lead & Pull Spindle Lathe / WEILER COMMODOR 230 AC -CE marking -Year of construction 2002 -Tip height 230mm -Circumferential diameter over bed 475mm -Circumferential diameter over face slide 270mm -Tip width 1000mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/plane feeds -Tapping/Metric/Inch/Module etc. -Spindle head Din 55027 / size 6 -Tailstock MK 4 -Drive power 11KW -Electric lining protection -Multifix base holder with inserts -Three-jaw chuck -Swarf back wall with work light -2x Emergency / Off -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2.6x1.1x1.6 meters / Weight 1900Kg

Head machine LIPPELT, type: Mini Rustica -in bakery condition- - Head machine / dough divider for ciabatta and rustic rolls - With cutting rollers for longitudinal cutting - Including 3 different cutting rollers - with guillotine for the cross-section - including seed station with 2 large plates and 2 smaller plates - The machine has been technically completely tested - Condition: Very good, ready to use - Capacity: approx. 4,000 pcs./h - El. Connection: 3x 400 V, 50 Hz, 1.1 kW The machine can also be purchased without seeding. The head machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrangement.

Buderus combined heat and power plant EN20 Bosch KWK System GmbH Lollar CHP module / chip modules Engine VW 2.0L CBS Natural Gas Power output 19 KW Generator KOEZIE 225/4 Thermal power 34 KW with 1000 litre tank hot water Stainless steel chimney etc Available now! Tel. 01715213204

Used juice bottling line into cylindrical glass bottles. Line Capacity: 250 ml – line capacity 9,000 – 12,000 pcs/h 330 ml – line capacity 9,000 – 12,000 pcs/h 750 ml – line capacity 5,000 pcs/ Twist-off cap bottles with diameters of 43 and 38 mm The line includes the following devices: Bottle depalletizer type DNB-15. Bottle scrubber type PBSz – 01 – 40. Stork monoblock type VS 32. 32 fillers. Year of manufacture 2015. Automatic cap capping machine with steam injection function model GG100. Rotary labeller from KRONES BONOMATIC Automatic Bottle Packer Type VENUS APB – 15. 10 cycles/min CIJ Videojet Inkjet Printer Model VJ 1620- Linear Bottle Dryer type LOB-25. Pasteurizer. Transporters.

Weiler Commodor B incl. 3 - axis digital display - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection - 2x Emergency / Off - Swarf back wall - Coolant device - Work light - Multifix with inserts - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

a. 50 Open fronted storage containers / stacking and transport containers SSI Schaefer, type: 14/7-0a, 710/500x820x610mm – used -: Price per piece from location: 59.-€ (net)! Price for complete purchase: only 49.-€ (net) / piece! Manufacturer: SSI Schaefer Type: 14/7-0A Year of manufacture: unknown Colour: lacquered Material: Metal Weight (kg): 35 Nominal dimension (mm) LxWxH: 700x800x600 External dimensions (mm) LxWxH: 710/500x820x610 Payload (kg): 800 kg Load (kg): 2400 kg Wall Thickness (mm): 1.25 Floor thickness (mm): 2 Condition: good, Available: immediately Location: Mettmann

Used bread roll line W&P, type: Rollprofi -In bakery condition- For cut rolls, smooth and round knitted, long rolled and double rolls. - 5 rows - 600 mm working width - Integrated dough divider and drum rounder, Multimatic - Pre-proofing time: 12 min - 6 min before long-distance taxiing station - 6 min between long roller and cutting station - Weight range:24-85 g - Output: max. 4,680 pcs. / h Visits and test runs are possible by arrangement.

Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Complete dough line for the production of ciabatta, square bread and baguette Consisting of the higher-level production units: - Dough pre-portioner - Extruders - Dough sheet is formed - Flouring stations - Cutting roller for longitudinal cutting - Guillotine for cross-section - Dismissal - Length of the line: approx. 20 meters - Capacity: max. approx. 2,100 kg / h - Condition: Good, ready to use The facility has always received the service and is in good condition. Already dismantled and stored. Viewing is possible.

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

Offered is a universal tool grinding machine: Speed: 2800rpm, grinding range: approx. 30-50mm diameter, grinding wheels: cup or dish wheels, weight: approx. 450-500kg, machine dimensions X/Y/Z: approx. 800mm/800mm/1500mm. Inspection possible by appointment.

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

Offered is a continuous dryer/drying system: Drying units: Alraun infrared and hot air tunnel, transport system: Alraun railing belt TB70x300 (model 2233), infrared drying (model IR70x60/250C/2109): IR radiant heat, digital temperature controller A-Senco TR-85, adjustable upper alarm value (uPal) up to 300°C, hot air drying (model WL70x60/150C/480m³/h/2208): convection heat/hot air, air capacity: 480m³/h, temperature range: controlled heat up to approx. 150°C, transport system: Alraun railing belt TB70x300 (model 2233): drive: SEW-EURODRIVE gear motor, control: MOVITRAC®-LT frequency inverter infinitely variable speed control, dimensions X/Y approx. 700mm/3000mm, inspection possible by appointment.

Vacuum Filling Machine/Sausage Filling Machine/Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 327 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casings. Particularly gentle sausage meat filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and break length infinitely selectable Level indicator, piece counter, unit shutdown Portioning range 5 – 10,000 g Portioning speed up to 700 portions/min. Clipper connector on the back Max. filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs Unique hygienic design Modern drive concept Minimal energy consumption 12" touch screen control Extremely quiet and qui ...

Auction-ID: A7-45252-1

Model VM400-30 Jaar 1998 Conditie Gebruikt Serienummer: 1990 Voorraad nummer: 3062B Belt width: 400 mm Capacity: max 30 strokes/min Hopper; 100 litres Belt speed: 1.5 - 15 m/min Compressed air: 6 Bar, 300 l/min Power: 3 x 380V, 50Hz, 5kW Dimensions: 2150 x 750 x 1750 mm Weight: 640 kg

Manufacturer Atlas Copco Machine Number API 432897 Type GA 30 VSD Year of construction 2012 max. pressure 12.8 bar Power consumption 30 kW Delivery rate 5,580 l/min Operating hours 34,011 B/h Machine utilization: 1-20 27% 20-40 30% 40-60 26% 60-80 12% 80-100 5% Test run carried out lxwxh 134x86x148 cm Weight 600 kg Loading costs 75,00 Euro Auction-ID: 043-H7G-3

Height=1.36 m, Overall length= 1.71 m, Overall width= 1.02 m, Net weight= 175 kg,

max. load capacity: 1000 kg, with mobile storage rack

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

TECHNICAL DATA: Usable width: 400 mm Installed power: 1.5 hp

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm Information No.28123-21620 Year of construction2010 Weight355 kgShell and tube heat exchangersNew arrivalsGab NeumannHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working c ...

Machine name: Combined heat and power plant used Manufacturer: SEnergie GmbH Type: G6.12TI Year of Make: 2008 Generator: NEWAGE STAMFORD Generator Type: UC. I274D2 Generator kW: 100 kW Fuel Type: Sewage Gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88.9% Dimensions: L 3,500 x W 1,100 x H 2,500 mm Curb weight: 3,000 kg Tech. Documentation: Yes Note: In 2018, a new engine was installed and the generator was rewound. Last service 15.10.2021 at 86,102 h Accessories: A control cabinet Condition: Used Price: On request

Used line for bottling juices into Tetra Rex cartons. 7.000 pcs/h Specifications: Tetra Rex Filling Machine: Type: Tetra Pak TR/27 Year of manufacture: 2016.11. Capacity: 7000 pcs/h Formats: 1 l, 0.5 l 2 Tray Making Machine: Type: Cardboard Packer 32 by Tetra Pak Year of manufacture: 2016.10. Formats: 23, 43 Conveyor 2: Type: Conveyor Control System Year of manufacture: 2016.10.

2 pieces of natural gas CHP in container Engine: Jenbacher J420 Engine version: B25 Power each: 1339 kW at altitude 1900 meters, at NN the power is 100 kW higher! Year: 2013 Generator: Leroy Somer LSA 52.2 L70 4P with 1970 kVA power Voltage: 400 V Hours: 13200 and 15600 The power generators were regularly serviced and checked. The systems are dismantled and immediately available. Subject to prior sale - errors possible! Internal reference number: E-1004-114

Model: TRC1500/600 Year: 2002 Condition: Used Serial Number: 1790 Stock Number: 3213 Belt width: 600 mm Transport length 1500 mm Power: 3 x 400V, 50Hz, 0.09kW Dimensions: 1600 x 850 x 1000 mm Weight; 135 kg

Year: 2005 Condition: Used Serial Number: 08060.01.01.00 Stock Number: 2597 Lifting height 1650 mm Sliding on rails Container: 200 litre tote bins Power: 3 x 400V, 50Hz, 0.75kW Dimensions: 1400 x 3150 x 2600 mm

The TBA 8 V110 1000ml Square is a space-saving Tetra Pak solution for safe, aseptic filling of liquids. Their square design ensures maximum stability and efficient display on the shelf.

Work and assembly table wood self-made approx. 250x100 cm, steel base, electrification

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.

Double work and assembly table wood self-made, 1 table approx. 400x100t cm, 1 table approx. 300x100t cm, small contents consumables

Dough divider and rounder Fortuna Primus Pro 6 Year of Make: 2015 Condition: cleaned and tested 6-row head machine Hopper volume: 40 kg Maximum hourly output: 9000 pieces Weight range: 40-100g Touchscreen control with recipe memory With flour and pressure roller at the outlet Adjustment of the weight and the effective chamber height via hand crank Machine on rollers, mobile with brake

Cross-cut and mitre saw METABO KGS 216 M, blade size max. 216 mm, S/N 6017897464

Bag filling and sealing machine Rianta PS Mako BFS 300 Year of Make: 2020 Condition: cleaned & tested Suitable for 2-core paper or plastic clip tape, 8mm wide, wire diameter. 0.6-0.8mm Capacity: 35 packs/min (depending on product) Max. product dimensions (LxWxH): 450 x 230 x 140 mm Air blower to open the bags Date Printer Incl. inclined conveyor belt, type: SF 1500

Water mixing and dosing device Langheinz Aquamix 32 Fully automatic water mixing and dosing unit with three inlets, demand-controlled flow and numerical input keypad Condition: new sealing rings, dirt screen and battery. Maintenance carried out. for connection to the drinking water network Intrinsically safe according to DVGW for mixing and dosing ice, city and hot water with automatically controlled flow that can be switched off Automatic Repeat and Partial Repeat numeric keypad 0-9 Housing material AISI 1,403 with 3 water temperature inlets

Dough divider and rounder King Grande Rex T3 Year of Make: 2021 Condition: cleaned & tested Extended model of the Basic Rex for processing high dough weights Also suitable for pizza, baguettes and other products 3-row head machine Max. hourly output up to 2160 pieces Stamp size SK 95 Weight range: 135 to 320 g

Key data: 75 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Dough Divider and Rounder King Mini Rex Multi Year of Make: 2012 Condition: cleaned & checked, maintenance carried out Roller hopper up to approx. 15 kg dough capacity Removable components for easier cleaning Simple control via microcontroller via touch panel Different weight ranges due to easy and safe replacement of the weighing drum bars Single to four-row operation Maximum hourly output of 1200 â€" 4800 pieces per hour Extremely large weight range: 8 â€" 330 g (different stamp sizes required) Incl. stamp size SK58, weight range:

Dough divider and rounder König Industrie Rex I 6 Condition: cleaned and tested Incl. dough funnel with lubrication, laterally movable with ladder Weight range: 30â€"100 g Max. hourly output: 18,000 pieces Siemens touch control with program memory Incl. 1 chamber drum Incl. 1 set for 4-row production, 1 set for 6-row production

Key data: 180 KW, 223 kVA, 400 V

MDE Gas Generator (CHP) MBK 2876 LN Sewage gas electricity and heat generator from 2001 with unknown operating hours, control has defect. 173 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: MDE Model: MBK 2876 LN Type: Natural Gas Electricity and Heat Generator Serial number: E 20464 Power [KWel]: 173 Power [KWth]: 289 Voltage [V]: 400 Current [A]: 346 Frequency [Hz]: 50 Engine: MDE BK 2876 LN – sewage gas Engine power [KW]: 180 Year of Make: 2001 Operating hours: unknown Weight unit [kg]: 3,000 Dimensions LxWxH [m]: 3.40 x 1.90 x 2.20 AC Generator Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: Leroy Somer Model: LSA K46.1 VL12TR C11/4 Type: AC Synchronous Generator Serial number: DJ07B532/02 Power [KVA]: 223 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 321 Speed [1/min]: 1,500 Year of Make: 2001 We ...

Pastries and croissants Rondo TOP LINE Suitable for the production of filled and unfilled croissants, puff pastry products such as cinnamon rolls and other stuffed baked goods. Available now! Laminating line (YOC: 2005) consisting of: Dough hopper/pre-portioner Dough Sheet Former Grease pump (year of manufacture: 2007) Conveyor belt with folding belts Satellite Head 1 Folding station Satellite Head 2 Cross roller Calibration Roller Transfer wristbands to the croissant section Conveyor belt with cutting rollers and spraying station Pneumatic 6 Piston Filler Guillotine Depositing device for