127,361 used machines on RESALE, but how to find them? Machine Search
Specifications: Processes: washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz+N+PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Payload, max.: 200 kg Washing tub: 900 l Rinsing tray: 900 l Oil separator: 200 l
Used-refurbished equipment 6100 kg/hour capacity 70 bar filling pressure filling/dispensing/storage Features: Straight filling, dosing, pumping Hydraulic trolley lifter integrated in the machine body Reservoir feed Fully stainless self-supporting frame structure 12" touchscreen with foldable protective cover 14 blade rotor 200 storable programs Clip machine connector Hungarian menu Technical data: Filling capacity: 6 100 kg/hour Filling pressure: 70 bar Vacuum pump: 16 m³/h Funnel size: 250 L Dosing: 5-9 999,9 grams programmable in 0,1 gram increments Speed (max): 1000 doses/min Voltage: 400V 3F/50Hz Power: 25 kW Weight: 1400 kg
Features: Straight filling, dispensing, pooling Hydraulic trolley lifter integrated in the machine body Fully stainless self-supporting frame construction 12" touch screen with fold-down protective cover 18 blade rotor 200 storable programs Clip machine connector Hungarian menu Optional ballast with reservoir Technical data: Filling capacity: 6 000 kg/hour Filling pressure: 45 bar Vacuum pump: 16 m³/h Hopper size: 250 L Dosing: 5-9 999,9 grams programmable in 0,1 gram increments Speed (max): 1000 doses/min Voltage: 400V 3F/50Hz Power: 11 kW Weight: 1400 kg
Straight filling, dosing, pooling trolley extractor 14 blade rotor fully stainless self-supporting frame construction 12" touch screen with fold-down protective cover 200 storable programs clipping machine connector Hungarian menu Technical data: Filling capacity: 6 000 kg/hour Filling pressure: 40 bar Hopper size: 250 L 250 g capacity 250 g capacity 250 g capacity 250 g capacity 250 g capacity 250 g capacity: 5-9 999,9 g programmable in 0,1 g increments Speed (max): 500 doses/minute Voltage: 400 V, 3F/50-60Hz Power: 8 kW Weight: 700 kg
Used-refurbished machine Unger 160 mm cutting attachment 4500 kg/h max. capacity Technical data Mixing chamber volume: 400 L Capacity approx.: 4500 kg/h Power: 35 kW (grinder motor) Electrical fuse: 125 A Dimensions: 1500x1335x1810mm Weight: 1700 kg WAW G 160 model 2000 S with mixing arm, hydraulic loader for 200 l hopper, push button operation, mixing arm, hopper volume 400 l, mixing capacity approx. 260 kg, machine weight approx. 1700 kg, hole plate diameter 160 mm, max. capacity 4500 kg/h, brand new cutting set with sorting and separating device (bone removal accessory).
Engine power of the bowl, kW: 1,5 Motor power of knives, kW: 37 Bowl volume, l: 125 Bowl rotation speed, rpm: 10/ 20 Two-axis speed in cutting mode, rpm: 2000/4000 Two-axis speed in forward and reverse mixing mode, rpm: 80/160 rpm Dimensions (WxDxH) max, mm: 2140 x 1375 x 1590 Weight, kg: 2200
- completely stainless design, for dry goods filling, - driven by state-of-the-art servo motor, - electronic control , - the vacuum system is equipped with a humidity sensor, - the filling speed is infinitely variable, - can be operated by knee switch - 90 litre hopper, foldable - with removable feed and cleaning auger, - the conveyor is of paddle-wheel design, stainless steel - possibility of connection to a clipping machine for the associated equipment - equipped with standard accessories. - Loading capacity: max. 3.000 kg/hour - integrated computer for control and regulation, - 99 program positions foil stowage, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display - dimensions: 1156 x 963 x 1775 mm Total power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, freque ...
Restored machine Variable frequency starting for lower current surge 30kW two-axis motor power 2 selectable two-axis speeds Stepless plate speed adjustment NEW two-axis bearings and seals
Performance data: - Filling capacity: max. 3.000 kg/hour - built-in computer for control and regulation, - 99 program positions, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display Technical data: Power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, frequency: 400V, 50Hz, 3 phase Max. filling pressure: 35 bar Reservoir head, complete - Maximum output 400 ppm - 1-10 turns infinitely variable - synchronous drive for the bowel support - with standard accessories and 3 filling tubes.
Rego Herlitzius Kobold Bread Slicer Bread Slicer 10mm 230V - Creel machine - on castors - with lubrication - Cutting width 10mm - for max. 42cm loaves of bread Specifications: - Manufacturer: HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61 cm Depth: approx. 60 cm Height: approx. 115 cm
In very good production ready condition: Cyklop M-PAC3, with all serial equipment and PVC plastic roll for banding.
Used-refurbished cutter machine 65L plate capacity Simple controls Thermometer Plate speed counter Stirring speed Speed: approx.4000 rpm Power: 20 kW Power consumption: 42 A (400V,50Hz) Wind. x Deep. x Core.: 1400x1100x1200 mm Weight: approx.1000 kg
Inv. Num. : 8405 Type: Peddimax No 1 Producer: Peddinghaus Created: 2019 Parameters: Operating hours: 150 h Strength: 140 t Pressure: 300 bar Equipment: Flaps
technical details:: new parts special accessories: original parts machine: Ryobi mm Big stock of new and original Ryobi parts for all offset presses Just asking for with spare parts number and model of the machine Big Discount possible! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Measuring and marking plateCast steel-grey cast iron heavily ribbedLength 1000 mmWidth 1000 mmThickness 54/225 mmWorking height approx. 800 mm- 4 pieces feet with adjustment screws for aligning the plateWeight 390 kggood surface; used
Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/AMasch. No. 9566 Year of construction approx. 2000Punching force 80 ton. Projection 300 mmPunching up to 40 mm in 14 mm sheet metalFlat material shears 450 x 15 mmAngle steel shears 130 x 130 x 13 mm4 edge shears 45 x 45 mmRound material shears 45 mmRectangular clinker up to 12 mmMotor power 5.5 kWNeching connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - work table with stop at the hole device 550 x 380
Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03611 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Path): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz- The
A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.
Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.
centre distance: 1200 mm : 550 weight of the machine ca.: 2,5 t multifix: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible.
With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible.
A centerless round polishing machine Loeser is available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine system with infeed and outfeed table: 1000mm/1000mm. Including magazines as well as infeed and outfeed table. Documentation available. An on-site inspection is possible.
table length: 700 mm table width: 400 mm table load: t total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible.
A total of five Cannon foam systems are available. Materials: isocyanates and polyol, press plate dimensions X/Y: 720mm/650mm, lid opening angle: 100°, tilt angle: 60°, opening min./max.: 312mm/502mm, parallel stroke: 190mm, approach stroke: 95mm, press stroke: 95mm, ejector stroke: 75mm, control: PLC. Including material preparation. Documentation available. On-site inspection is possible.
hobbing length: 2100 mm milling width: 300 mm max. module: 16/18 min. module: total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: M01.43870 frequency: 50 Hz voltage: 400 V : 24 V connected load: 48 kW rated current: 63 A control: Siemens 840 D turning diameter: 250 mm turning length: 100 mm weight of the machine ca.: 7,5 t turning length external: / innen 100 mm workpiece length - min.: 29 mm workpiece length - max.: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: NA mm y-travel: NA mm workpiece height: mm stroke length max.: 450 mm table length: 450 mm table width: 350 mm total power requirement: 1,7 kW weight of the machine ca.: t dimensions of the machine ca.: m Shaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm turning diameter in the gap: 530 mm turning speeds: 65 - 1810 U/min centre height: 205 mm spindle bore: 52 mm tailstock quill taper MT: 4 total power requirement: 2,2 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 0,8 mm throat: 180 mm roll diameter: mm weight of the machine ca.: 22 Kg dimensions of the machine ca.: 500 x 450 x 160 mm Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 4 mm roll diameter: 125 mm throat: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With 4 roller sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • hydraulic version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 1,2 mm roll diameter: 62 mm throat: 100 mm total power requirement: 0,75 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: 320 mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2500 KW, 10500 V
FOR SALE: Caterpillar G3520H Gas Generator Set (2013) Zero Hours Since Major Overhaul | 2,500 kW Continuous Power Output Maximize operational efficiency and reliability with this prime power, high-capacity industrial generator. This natural gas-powered genset delivers continuous-duty performance and is ideally suited for mission-critical infrastructure, distributed energy systems, and onsite power generation. Technical Specifications: Engine Model: Caterpillar G3520H Generator Set S/N: GFP00117 Manufacture Year: 2013 Power Rating: 2,500 kW / 3,125 kVA (Base Load / Baseload Applications) Fuel Type: Natural Gas Rated Voltage: 10,500 V Frequency: 50 Hz Power Factor: 0.8 (Lagging) RPM: 1500 Rated Current: 172 A Phase Configuration: 3-Phase Connection Type: Wye (Star) Insulation Class: F Excitation Voltage / Current: 50 V / 4.3 A Cooling Sy ...
STUFFER HANDTMANN, TYPE: VF80 AND SAUCE DOSING MACHINE HANDTMANN 6 HEADS Technical description: Stuffer (x2): Handtmann VF 80 (1) ID-1638 TYPE: VF80 10-5N Serial number: 637 Power supply: 380 V, 50 Hz, 9,55 A, 3,55 kW Dimensions: 940 x 900 x 1600 mm (2) ID-1640 TYPE: VF80 N50/35 Serial number: 221 Power supply: 380 V, 50 Hz, 10.85 A, 4 kW Dimensions: 1050 x 700 x 1600 mm Sauce dosing machine, Handtmann ID-1639 Heads number: 6 Dimensions: 2300 x 1050 x 1650 mm
VACUUM STUFFER WITH LOAD LIFTER, HANDTMANN TYPE: VF200B CODE: N80/35 Technical description: Throughput rate: Up to 5.000 Kg/ h Power supply: 380/440 V - 50/60Hz Power: 6,5 Kw Dimensions: 2000 x 1350 x 2200 mm
STUFFER + PORTIONER WITH SAUSAGE HANGER, HANDTMANN Technical description: Stuffer type: Handtmann VF100B Portioner type: Handtmann AL 242-01 Hanger type: Handtmann 242-16 Power supply: 380-440 V / 50-60Hz https://youtu.be/ZxAf2uRbDf4
BATTERING-GLUING AND BREADING MACHINE, STEIN, MESH WIDHT 200MM Technical features: Battering-gluer: Material: Stainless steel Power supply: 380V-440 / 50-60Hz Battering-gluer dimensions: 1200 x 700 x 2000 mm Breader, Stein, model: E8J Serial number: 184 Bandwidht: 200 mm Dimensions: 2400 x 750 x 2000 mm
A complete packaging and palletizing line for buckets is available. 1) Vollenda 2VNES2-6-E bucket filling machine, year of manufacture: 2009, bucket formats: 2kg-5kg, filling capacity 2kg/5kg: 1200/800 buckets/h. 2) Palletizer Ehcolo EPL 160, year of manufacture: 2009, empty pallet magazine positions: 15, max. pallet dimensions X/Y/Z: 800mm/1200mm/1500mm, palletizing capacity 2kg/5kg pails: 800/1200 pails/h. 3) Wrapping machine Robopac Rotoplat 3000HD, year of construction: 2009, max. rotation speed: 12 rpm, max. wrapping height: 2400mm, power: 11kW, weight: approx. 1400kg. Documentation available. On-site inspection is possible.
Product: round 2kg bucket for mozzarella with handle and snap-on lid, throughput: 1600-1800 buckets/h, bucket dimensions: 175x131mm, connected load: 7kW, compressed air connection: 6bar, length: 2060mm, width: 2060mm, height: 3200mm, weight: approx. 4t. Double-lane, includes cup setter, cup control, free space for the installation of a multi-head weigher, rag dosing, CIP design, inverted lid station, push-on station, lifting/pushing-off, discharge conveyor, process control, central lubrication, drainage channels and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine did not run much.
Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible.
Two identical vertical flow-wrapping machines from PFM are available. 1) PFM Zenith, year of manufacture: 2012, weight: approx. 870kg, connected load: 5kW, packaging output: approx. 60/min. 2) PFM Zenith, year of manufacture: 2009, weight: approx. 980kg, connected load: 6kW, packaging capacity: approx. 60/min. Both machines were used in the food industry for packaging individual bags in a large outer bag. Documentation available. On-site inspection is possible.
Two flow wrapping machines and a Hugo Beck shrink tunnel are available. 1) Hugo Beck Flexo 500 S flow-wrapping machine, year of manufacture: 2004, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recycled film/half-tube and flat film. 2) Flow wrapping machine Hugo Beck Flexo 500 S, year of construction: 2001, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recyclate film/half-tube and flat film. 3) Shrink tunnel Hugo Beck 5012/25, year of constructi ...
Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025.
An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
