boring and drilling used for sale

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

Key data: 206 KW, 500 kVA, 400 V

Sokratherm Gas-CHP GG202 oE Gas electricity and heat generators from 2019 with 10,777 operating hours, Complete CHP (closed unit) with additional silencer. 1 available 202 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2M7 V 6/4, 500 KVA Manufacturer: Sokratherm Model: GG202 oE Type: Gas CHP Serial Number: 3131754 Engine: MAN E3262E302 Electric power [KWel]: 206 Thermal power [KWth]: 316 Gas Capacity [KWgas]: 561 Year of Make: 2019 Hours: 10,777 Weight unit [kg]: 6,500 Dimensions LxWxH [cm]: 400 x 150 x 240 AC Generator LSA 47.2M7 V 6/4 Manufacturer: Leroy Somer Model No.: LSA 47.2M7 V 6/4 Type: AC Synchronous Generator Serial Number: 353345/1 Power [KVA]: 500 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 722 Speed [1/min]: 1,500 Year of manufacture: 2018

Banding maretial PW8030150 white paper 40 rolls and PB7030150 brown paper 40 rolls. Banding maretial PW8030150 paper white 40 rolls and PB7030150 paper bouwn 40 rolls.

Rego Herlitzius Type: Rotec 350 Circular knife Year of construction 2010 Cutting width: 3 – 25mm completely made of stainless steel for loaves max 3250mm length on casters tested and cleaned Stock level: 2 pieces

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

Height 1950 mm Width 1800 mm Length 1500 mm Weight 1400 kg Power supply: 400V 50Hz 3N Total power 18 kW Loading Loading integrated into the machine Description Vacuum filler Handtmann VF 622 in a set with a grinder GD 93-3

Height 1200 mm Width 1250 mm Length 1750 mm Weight 600 kg Capacity 3500 kg/h Power supply: 400V 50Hz 3N Total power 52 kW Cutter Type Through Cutter Cutter design Stainless steel, acid-resistant Knife shaft speed 2970 rpm

Ultrasonic Banderolier ATS US 2000 AST-MDM; cleaned and tested; Frame size 900x750mm; Belt width 30mm; suitable for paper (also suitable for TruePaper paper) or foil; Meter reading 795,000 thousand; Compressed air required. Ultrasonic banding machine ATS US 2000 AST-MDM; cleaned and checked;  frame size 900x750mm; band width 30mm; used for paper (also for TruePaper material) or foil; counter 795,000; pressurized air needed.

used fat baking appliance Treif Pegasus, overhauled, 50 Hz, 400 V, 0.9 kW, control system has been renewed, completely in stainless steel version, weight: 168 kg

used bread slicer Schickart TS/38 plus, overhauled, 400 V, 0.75 kW

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Straight and cut machine Wafios R31 Diameter: 1-5mm – 7mm MY: 1993 – working condition Machine Number: 26106224 Extension length: 2m or 6m available Pay-Off: not available, we can offer separate for 3t. Mechanically refurbished Electrical checked Machine is in working condition

Key data: 65 KW, 400 V

Buderus Gas Generator (CHP) E 0826 DN-60 Gas electricity and heat generator from 1998 with 41,972 operating hours, closed unit, generator with voltage fluctuations. 1 available 65 KWel x 1,500 rpm, 400 V/50 Hz. Manufacturer: Buderus Model No.: E 0826 DN-60 Type: Gas CHP Serial number: 03198-00020-283 Power [KWel]: 65 Power [KWth]: 110 Engine: MAN E0826 E301 Year of Make: 1998 Hours: 41,972 Weight unit [kg]: 2,100 Dimensions LxWxH [m]: 3.10 x 1.00 x 1.75

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections and suction line. Inlet and overflow, water level gauge, anti-vortex plate, etc. can be offered additionally. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Key data: 400 , 800 , 1000

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11" cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm 8 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 1,1 kW, 380-500 V condition: good (used) Conveying length in mm: 7500 Nominal / outside width in mm: 1000 Roll width in mm: 840 Roll division in mm: 175 Driven: YES sc ...

Standing steel tank with inner coating Suitable for; Extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 11 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

horizontal steel tank with inner coating, pressure tank Can be used underground and above ground Volume: 35,000 L Dimensions: Ø 2.50 × 7 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

We offer new, unused seamless hot-finished line pipes with high-quality PE and PP coating. The pipes have never been installed and have been stored at their designated location since delivery. Available Specifications: 230 tons – 273 mm x 12.4 mm x 13 m, PE coating, standard: EN 10208-2, L290NB 50 tons – 273 mm x 16 mm x 13 m, PP coating, standard: EN 10208, L290NB Manufacturer Certificate (Mannesmann) available Coating by Rhenania Additional Services: Custom Pipe Cutting – Tailored to fit 40-foot containers for efficient transport International Shipping Available (Shipping costs to be covered by the buyer) Loading Services – We handle the loading process

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Used biscuit line for continuous round and square rolls BERTUETTI, Type: Universal Line - for round rolls, such as hamburgers and square ones - Universal dough divider and rounder SV250-G14 - Continuous rounding by G14 - Feed belt 1,900 mm - 6 rows - 1, 2, 3 or 6 rows can be used - Guillotine cutting system - Automatic sheet loader N20 for sheet sizes 60 x 100 cm - Lifting tipper - Dough intake - Sowing SST - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

Used biscuit line for round, square and hot dog buns BERTUETTI, type: 200 Universal - for round, square and long-rolled rolls, such as HotDogs - 4 rows - 1, 2 or 4 rows can be used - with settling on sheet metal - Dough intake - Sowing - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

FULL WEIGHING AND BAGGING LINE - EXCELLENT CONDITION FULLY WORKING COMPLETE WITH STAINLESS STEEL GANTRY, INCLINE FEED CONVEYOR AND OUTFEED CONVEYOR GEA SMART PACKER GX250H - VERTICAL FORM FILL SEAL BAGGER 250MM JAW MACHINE NO: 12330 YEAR: 2017 WEIGHT: 950KG 415V MULTIPLE TUBE SETS ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RVE-216B-10/15-SS MACHINE NO: 560012161 16HEAD YEAR: 2017 240V WEIGHT: 535KG PLEASE DO NOT HESITATE TO CONTACT FOR MORE INFORMATION

Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

Bread slicer Treif Model: Pegasus Stainless steel version Manual operation Cutting width 4 - 14mm Cutting machine mobile Connection 400V, 16A-CEE plug Approx. dimensions: 1000 x 700 x 1200 mm, WxDxH Machine Visit our bakery machine park!

Tape: PVC or PP; width max. 50 mm; core 76mm; 40-55 mm overlap. Transport speed: 20 m/min. Operating temperature: 5 to 45 °C. Connection: 230 V/1~N/50 Hz, 0.6kW Degree of protection: IP54. Watts: 240 watts

Treif Diskus Smart Circular Knife Machine Stainless steel version Max. 130 slices per min. Knives newly sharpened and coated Manual operation via rotary control Disc thickness adjustable from 4 - 24 mm Dimensions: 650 x 690 x 1100 mm, WxDxH Bread dimensions max: 300 x 200 x 160 mm LxDxH DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned and function-tested 3 months warranty Many TOP bread slicers in stock!

Bread cutter Wabäma Model: Allround Economy Plus 380.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Machine Option: Maintenance contract Spare blade Service Package Come and visit our bread slicer park!

Bread cutter Wabäma Model: Allround Economy Plus 380.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Machine Option: Maintenance contract Spare blade Service Package

Bread cutter Wabäma Model: Allround Economy Plus 380.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Machine Option: Maintenance contract Spare blade Service Package Many more bread slicers in stock!

YOC 2001, working width 220 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

02 sets Picanol Air-Jet Weaving Looms, type OmniPlus Summum – 250-4R YOC 2015, working width 250 cm, 4 weft colors Stäubli electron. dobby 3220 / C4Can – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, double whip rollers, max warp beam flange dia. 1,000 mm, off-loom take-up

turning diameter over bed: 1440 mm turning diameter over slide rest: 960 mm turning length: 8200 mm faceplate: 1250 mm bed width: mm turning diameter in the gap: 1460 mm length of gap: 460 mm turning speeds: 1,8-400 U/min steady: workpiece weight: 22000 kg total power requirement: 46 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Frey OSCAR 20 Piston Filler used Machine is equipped with two rollers that allow manoeuvring with the toggle lever folded out It comes from an insolvent company, the piston with gasket, union nut, piston wrench and piston screw could not be found during the dissolution and were therefore reordered, see pictures. The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in the same condition as it was returned by the customer, so it must be thoroughly cleaned before use Video about test run available

Industrial Processing Tank – 19,517 L Working Capacity (2006) High-capacity industrial processing and storage tank designed for hygienic handling of liquid food products in beverage and dairy processing environments. The tank offers robust construction, high temperature tolerance, and pressure capability suitable for modern production lines. General Information - Year of Manufacture: 2006 - Condition: Used, operated only for a short period Capacity - Working Capacity: 19,517 liters Technical Specifications - Maximum Pressure: 4.0 bar - Maximum Temperature: 145 °C Dimensions - Outside Diameter: 2,570 mm - Total Height: 6,830 mm Key Advantages - Large 19,517 liter working capacity - Suitable for high-temperature processing applications - Designed for pressure-resistant operation up to 4.0 bar - Ideal for dairy, beverage, and liquid food processing - Robust  ...

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

used bread slicer Wabäma R400 E, overhauled, with circular blade, for below counters

Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

The Paraquda series of pick and place systems combines large feeder capacity, fast programming and changeover while the machine is running (hot swap) 80 x 70 mm (alignment) including fine The Paraquda series automatic pick & place machines are designed to fulfil the requirements of a high mix SMT production. All SMD components are placed fast, reproducible and reliable using modern placement technologies. Paraquda machines offer the perfect overall concept of machine and software for productions where flexibility is required. Find more here - / Contact us at -

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Mesa 900 is specifically designed to efficiently cut the cheeks and tongues of fish heads. It is suitable for processing all mid-sized fish heads without special adjustments. The machine is equipped with two separate tubs, one for collecting offal and the other for the already processed heads. This item was settled up for range 300 – 500 g cod heads weights but could be easily reset back for 600 – 1300 g weight range, on demand.

Totally overhauled Marel IPM X300 Portion Cutter Marel X300 is specifically designed for cutting fish fillets and meat into portions of pre-set weight or length. It is equipped with a laser scanner to accurately measure the product before cutting. It is the perfect solution for achieving high-quality portioning of salmon into fixed-weight and fixed-length portions. The machine features a perforated belt with a width of 280 mm. The belt speed is adjustable, reaching up to 300 mm per second. Accuracy: 96-98% Capacity: Can portion up to 15 fillets per minute. Dimensions (LxWxH): 3300 x 1000 x 1650 mm.

Manufacturer: Syntegon Model: AFG 5026 Year of Manufacture: 2019 Type of Machine: Filling and Sealing Machine for Vials with Powder Condition: Not used Key Features: - Zoning concept for infeed, filling, outfeed, and drive area - Best accessibility and simplified cleaning procedure - Innovative transport system for continuous and intermittent operations - Vertically rotating mechanism - High output, even with 100% IPC (In-Process Control) - Ideal for wall installation - Optimized Design: - Vertical wall design for best operability - One-side operability for streamlined workflow - Suitable for integration with barrier systems - In-wall installation for space efficiency Find more here - / Contact us at -

Manufacturer: Laska Type: KU 200 V.DC Model : 0214 Year of construction : 2012 Power: 97 kW Weight: 4300 kg Length x width x height: 3900 x 2300 x 1660 mm Connection: 400V 50 Hz Bowl volume: 200 L - Cutter Vacuum 200 L - With feeder and ejector Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Lift-tilt system height: 8,20m. Tilt system inlet dimensions: 1100 x 1200 x 1750mm Euromorm.

Key data: 3600 KW, 4600 kVA, 6600 V

We offer a MWM CHP Type: TBG 632 V16 for sale Specifications: Engine: MWM Type: TBG 632 V16 Power: 3600 kW Generator: AVK Power: 4600 KVA Voltage: 6600 V Running hours: 47,000 h Weight: 46,000 kg Scope of delivery: motor plus generator on base frame