126,720 used machines on RESALE, but how to find them? Machine Search
FAG - Batch of bearings and cast iron bearing housings 441KG
Installation material, Flow meter, Insulation material
Specifications: Master and model inserts Length: 6.5 m Width: 2.3 m Number of lifting arms: 4 - heavy insertion arms - with built-in tapered rollers - Substructure in heavy steel construction - built-in roller rails - 4 strands with roller rails Condition as new, with functional review, to the exclusion of any Warranty
Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer
SKF / FAG / IKO - Batch of various industrial bearings and components
Specifications: Master and model inserts Length: 5.7 m Width : 1,7 m Number of lifting arms 5 - heavy insertion arms - Substructure in heavy steel construction - built-in roller rails - 5 strands with roller rails Condition as new, with functional review, under exclusion of any warranty
Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive
SKF - Batch bearing housing, various bearings and components 44KG/li>
Available in stock 5 x Used Capstone Display Panels. Most commonly used for Microturbines C60 and C30. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
26x 33281/Q SKF 40x FRB12/160 SKF 44x PCM15015580F SKF 100x UL36-000426 SKF 67x FR130/10 FAG 30x HJ2318 FAG 3x 3215B. TVH. C3 INA 71x F-110488 INA 57x F-45398 INA 220x F-45914 INA and more
HFH, HIWIN, KG, URB, JNS, ISB, - Batch of various bearings and bearing components 221KG
Wrapping machine for deposited or enrobed chocolate products with or without center-filling in double twist wrap. Speed of the machine - up to 400 pcs/min Product dimensions: - Length: 20 – 75 mm - Width: 13 – 29 mm - Height: 8 – 25 mm - Diameter at bottom: 13 – 25 mm With original feeding system. More details in the attached document
Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools
3 welding carts Welding cart 1 is width 42cm length 100cm height 140cm welding cart 2 is width 42cm length 84cm height 135cm welding cart 3 is width 57cm length 101cm height 180cm
SKF - Batch of automotive parts - drive shafts, bearings and pumps 135KG
2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power
SKF, FAG, INA - Batch of industrial bearings and components 190KG
Batch of heavy duty bearings and metal housings 363KG
Technical specifications drain filter Dimensions [LxWxH] [mm] : 670 x 670 x 670 Air capacity [m³/h] : 3.000 External Static Pressure [Pa] 220 Motor power [kW] : 1,00 Voltage [V] : 230 Nominal [A] : 6,50 Technical specification supply fan unit: Dimensions [LxWxH] [mm] : 550 x 550 x 550 Air capacity [m3/h] : 2.800 External static pressure [Pa] : 200 Motor power [kW] : 0,42 Voltage [V] : 230 / 1-phase
Ball screw with motor bell, bearing and coupling, D50x680mm, , mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number we will gladly issue an invoice without VA. As good as new! The assembled linear actuator comes from a spare parts store of a mechanical processing was there for a long time in stock, is preserved and has never been used. Technical data: 1 pc ball screw with motor bell, bearing and clamping set for mounting on the drive motor consisting of: - 1 pc. motor bell with bearing for the ball screw drive and 1 clamping set for mounting on the drive motor, Fa. Grob - 1 pcs. ball screw drive MVD400-155-100-2, total length of the spindle approx. 560mm, thread length 355mm, pitch 10mm, Max. Total stroke 193mm, - 1 pcs. nut to ball screw, length of nut 162mm, Function guarantee! For second hand parts, we can ...
Weibert FS32 Dressing thickness planer Planer width: 320mm Planing shaft: 3-reversible knife shaft Motor power: 3KW n=4500U/min, 400V Passage height: 4-225mm Side stop WJ-300100 OPTIONS AT EXTRA COST: Professional dressing stop Long-hole drilling equipment Wescott Chuck 0-16mm Driving equipment Digital height adjustment Dressing table extension adjustable 750mm Drive motor 4KW S1
SKF - Batch of bearing components and accessories
Saw blade diameter: 520 mm Bore diameter: 50 mm Nominal voltage: 400 V Table dimensions: approx. 900 x 700 mm incl. SCHEPPACH ha 1000 extraction
NEW, Not used in box Mounting: IMB3 / IM1001 (foot-mounted) Efficiency class: IE3 Power: 3.0 kW Speed: ~2896 rpm (50 Hz, 2-pole) Voltage: 400 V (Δ) / 690 V (Y) typical Frequency: 50 / 60 Hz Current: ~5.4 – 9.7 A (depending on wiring) Cos φ: ~0.90 – 0.92 Duty: S1 (continuous) Insulation class: F Protection: IP55
Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools
Hinged tape chains of different manufacturers, different sizes, new and used on request
Wenzel roughness and contour measuring station for crankshafts Measuring plate made of hard rock Length: 3670 mm Width: 850 mm Flatness tolerance according to DIN 876/1 Target value 48 μm Actual value 32 μm Ident No.: 14280 JFA Dispensing Blocks Item location: 42859 Remscheid More measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!
Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water
32 ignition coils and 16 spark plugs from Jenbacher J316 for sale The price for coils and spark plugs is 20 € each.
Weibert ADM 320 Dressing thickness planer Planer width 320mm 3 knife shaft Motor 3kW 400V Dressing table 1500 x 320 mm chip removal 5mm Speed 5000 rpm Thickness table 700 x 316mm Passage height 230mm Feed 7m/min Weight 260kg WJ-ADM-320
Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...
Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
Spray booth water stabilizer Specifications: Agitator Pump Filler neck Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 thickness 3mm More items - new and used - can be found in our shop! International shipping costs on request!
The thickness of the bread slice is 15 mm; Slicing speed: up to 70 pieces per minute; easily replaceable blade system
Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm
maximum number of results exceeded
please refine your search
