135,373 used machines on RESALE, but how to find them? Machine Search
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 8144.6 € : 157.19 € : 25 mm : MK 3 : 280 mm : 125 - 4000 (2 Stufen) U/min : 0,9 / 1,45 kW : M20 : 520 mm : 820 mm : 1900 mm : 275 kg : 125 mm : 110 mm : 240 - 790 mm : 420 x 340 mm : 125 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Digital drilling depth and speed display Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS: Drill package (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible.
Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cl ...
Machine number: 32250 Throat: approx. 1300 mm Speed: up to 1800 rpm Table dimensions: 1570 x 440 mm with one groove incl. matching accessories and documentation as well as gripper arm Auction-ID: A7-49089-373
new
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15441 € : 296.47 € : 40 mm : MK 4 : 300 mm : 1,5 / 3,0 kW : M30 : 610 mm : 850 mm : 1920 mm : 440 kg : 0 - 300 mm/U : 160 mm : 125 mm : 150 - 700 mm : 590 x 450 mm Display with the following functions: - Selection of operating mode: manual drilling / drilling with feed / tapping - Spindle speed - Feed rate - Zero point setting - Drilling depth - Piece counter - Chip breaking mode - Jump switch mode (for efficient drilling of square tubes) - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode Drilling capacity / normal drilling performance 35/40 (in E335/ST60) Automatic feed Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protecti ...
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 € : 15 mm : B 16 : 214 mm : 40 - 4000 U/min : 0,54 kW : M10 : 355 mm : 485 mm : 1027 mm : 70 kg : 125 - 490 mm : 300 x 250 mm : 82 mm THE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLS PLUS - CONTROL PANEL - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60) Manal feed Tapping device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Head height adjustment via toothed rack LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton The ...
Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mm turning speeds: 1000 - 6100 U/min bore slide stroke: 850 mm bore depth: 550 mm spindle distance: 240 mm dimensions: ca. 6 5 2,3 m Shipping weight: ca. 6000 kg Packing: ca. 10 Lademeter m : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 18 mm
The machine has three separate drilling spindles, which means that several holes or different machining steps can be carried out efficiently one after the other. It is therefore particularly suitable for use in industrial production, mechanical engineering, workshops and recurring drilling work. The machine is mounted on a stable work table and has a generous work surface. The integrated protective panels with viewing windows allow for a protected work area while providing a good view of the workpiece. Below the work surface there are additional storage and storage options. Design: 3-spindle in-line drilling machine 3 drilling spindles for efficient machining Robust, industrial construction Large integrated work surface Protective cladding with viewing windows Operation directly at the individual drill heads Integrated base with drawers/storage compartments Suitable for seri ...
Year of manufacture 1989 4 drilling spindles Adjustable drill spindle spacing electr. Drive electr. Footswitch Delivery date: immediately from stock
Offer 26231 Technical data: - Drilling capacity in steel St 60 45 mm - Drilling capacity in steel St 60 55 mm - Drilling spindle holder long spindle MK 4 - Drilling spindle speeds AZ gearbox infinitely variable in 2 speed series - 40 - 760 rpm - Drilling spindle stroke 140 mm - Projection 300 mm - Column diameter 145 mm - Table with 2 T-slots 460 x 420 mm - Distance table-drilling spindle min / max 35 / 640 mm - Drill spindle – machined base plate approx. 1150 mm - 3 feeds 0.10 - 0.20 mm/rev - Drive 400 V / 1.8 / 2.9 kW - Keyless chuck - Machine vise - Space requirement approx. W 600 x H 1800 x D 950 mm - Weight approx. 380 kg
Offer 26231 Technical data: - Drilling capacity in steel St 60 45 mm - Drilling capacity in steel St 60 55 mm - Drilling spindle holder long spindle MK 4 - Drilling spindle speeds AZ gearbox infinitely variable in 2 speed series - 40 - 760 rpm - Drilling spindle stroke 140 mm - Projection 300 mm - Column diameter 145 mm - Table with 2 T-slots 460 x 420 mm - Distance table-drilling spindle min / max 35 / 640 mm - Drill spindle – machined base plate approx. 1150 mm - 3 feeds 0.10 - 0.20 mm/rev - Drive 400 V / 1.8 / 2.9 kW - Keyless chuck - Machine vise - Space requirement approx. W 600 x H 1800 x D 950 mm - Weight approx. 380 kg
ALZMETALL AX 4 / SV Säulenbohrmaschine 3KW Hersteller: Alzmetall Typ: AX 4 / SV Zustand: Vorführmaschine / unbenutzt Baujahr: 2024 Bohrvermögen Stahl E335 (St 60) 55 mm Gewindeschneiden Stahl E335 (St 60) M 42 Guss EN-GJL-200 M 56 Kurzspindel MK 4 Spindelhub 140 mm Nutzbare Ausladung 300 mm Säulendurchmesser 145 mm Maschinentisch, nutzbare Auflage 615 x 430 mm Abstand Spindel-Tisch min./max. 150/735 mm T-Nuten, Anzahl x Breite x Abstand 2 x 14 x 224 mm Vorschub 0,1 + 0,3 mm/U Maschinenhöhe ca.1850 mm Nettogewicht ca.380 kg Antrieb stufenlos Motor 1500 U/min Leistungn 3,0 kW Spindeldrehzahl U/min 70-2400 Serienmäßige Ausrüstung: Hauptschalter mit Motorschutzschalter abschließbar Pilzdrucktaster (verrastend) für NOT-AUS Drehzahlverstellung stufenlos Drehzahlanzeige Digital Vorschubüberlastsicherung Schutzart IP 54 Spindelschutz mit elektrischer Absi ...
Lg.Nr. 25046 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable - Adjustable - Level 1 65 - 240 rpm - 130 - 480 rpm - Level 2 240 - 875 rpm - 480 - 1750 rpm - Projection 290 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 450 x 450 mm - Table with reversible function with fixed machine vice - Table height adjustment via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 300 kg - with: - Keyless chuck 1-13 mm
Working width: 230 mm Working height: 15-120 mm Number of spindles: 2 St. Weinig Hydro Planer Type Uniplan 23 -------------------------------------------------------------------- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. ...
Table dimensions ( x-y/mm) 1600 x 1300 Stroke ( X/mm) 2000 Stroke ( Y/mm) 1200 Stroke ( Z/mm) 800 Type of controll fagor 8065 Number of spindle per minute 0 - 6000 Accessories atc 40 tools Chuck connection iso 50 Number of axes 6 Features wise system
Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!
Table dimensions: 1100 x 400 mm with three grooves Throat: approx. 907 mm Speed: from 35 to 1800 rpm Auction-ID: A7-49089-393
Machine number: 1863 Operating voltage: 3 x 400 V Frequency: 50 Hz Nominal current: 14 A Throat: approx. 500 mm Speed: from 25 to 3000 rpm Table dimensions: 560 x 480 mm, with three grooves and a three-jaw chuck, diameter: 210 mm Auction-ID: A7-49089-266
Machine number: 33905 Operating voltage: 400 V Frequency: 50 Hz Rated current: 5 A Spindle speed: from 120 to 2200 rpm Drilling depth: 160 mm Table dimensions: 400 x 300 mm with two grooves and a vice, jaw width: 70 mm Auction-ID: A7-49089-268
Machine number: 6233-5 Speed: up to 2800 rpm Drilling diameter: up to 40 mm Projection: approx. 907 mm with two tables Table dimensions: 780 x 600 mm - with four grooves, as well as a three-jaw chuck, diameter: 400 mm Table 2: 1000 x 540 mm, with four grooves and two vices, one jaw width: 125 mm and 100 mm a four-jaw chuck, manufacturer RÖHm, diameter: 200 mm as well as a four-jaw chuck, diameter: 150 mm and a dividing head from the manufacturer HOFMANN, type: VTS 160 with a three-jaw chuck, diameter: 200 mm also various clamping systems, including KOHN clamping system, jaw width: 120 mm Auction-ID: A7-49089-208
weight max.: 1 t stroke: / mm clamping width: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 30 mm, 700 mm
Radial drilling machine Manufacturer Danube Type DF130 / Danuflex 130 Digital Year of construction 2003 Spindle speed 40 - 3600rpm Feed rate 0.05 - 0.55 mm/rev Column diameter 170mm Quill stroke 170mm Table size 630 x 1200mm Table load 1000kg with 3D button Heidenhain Instruction manual available.
IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes dismantling and transport INFORMATION TO FOLLOW
used
Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmGeneral2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® multi-touch control Work spindle (right)Spindle diametre on front bearing90 mmSpindle bore45 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shan ...
used
General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Shank diametre according to DI ...
used
General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shan ...
Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Drill chuck -Hydraulic clamping -Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900Kg
core drilling diameter max.: 50 - 365 mm bore depth: 24500 mm swing diameter: 1600 mm full boring: 50 - 310 mm bed width: 1200 mm faceplate diameter: 1300 mm workpiece weight max.: 25 - 80 t diameter of main spindle in front bearing: 400 mm Height of centres: 800 mm turning speed range: 0 - 315 U/min main drive DC: 44 kW drill diameter: 500 mm feeds: 0,5 - 500 mm/min workpiece length - max.: 10.000 mm work piece power: 74 kW turning speed range - drilling: 120-600-2400 U/min hollow spindle diameter: 460 mm turning speed range: 30-600 U/min Control: total power requirement: ca. 200 kVA weight of the machine ca.: - t dimensions of the machine ca.: - m modernised in 2002 and 2011 operates using the BTA process - - 2 roller mandrels 100–650 mm - 2 roller stands 650–1200 mm - Coolant system Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm ...
core drilling diameter max.: 50 - 365 mm bore depth: 24500 mm swing diameter: 1600 mm full boring: 50 - 310 mm bed width: 1200 mm faceplate diameter: 1300 mm workpiece weight max.: 25 - 80 t diameter of main spindle in front bearing: 400 mm Height of centres: 800 mm turning speed range: 0 - 315 U/min main drive DC: 44 kW drill diameter: 500 mm feeds: 0,5 - 500 mm/min workpiece length - max.: 10.000 mm work piece power: 74 kW turning speed range - drilling: 120-600-2400 U/min hollow spindle diameter: 460 mm turning speed range: 30-600 U/min Control: total power requirement: ca. 200 kVA weight of the machine ca.: - t dimensions of the machine ca.: - m modernised in 2004 operates using the BTA process - - 2 roller mandrels 100–650 mm - 2 roller stands 650–1200 mm - Coolant system Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 600 ...
bore capacity in steel (diameter): 36.0 mm bore capacity in cast iron: 45.0 mm throat: 300 mm bore stroke: 160 mm : 4 speeds: 65 - 2000 U/min column diameter: 145 mm table-size: 615 x 460 mm feed: 0.1 / 0.2 / 0.3 mm/U total power requirement: 1.75 / 2.5 kW weight: 440 kg dimensions: 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features: - Robust column drill press (V-belt drive) - Electromagnetic feed clutch = spindle feed with overload protection and electric cross-handle control - mushroom-head pushbutton (latching) for EMERGENCY STOP located on the front panel - continuously variable speed control - clockwise rotation of the drill spindle - Pole-reversible drive motor - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable - Separate coolant system, with reservoir - Operating instructions in ...
: 18 mm : M 12 : M 14 : MK 2 : 225-4.300 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel total power requirement: 0,37/0,55 kW Machine height: 840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 132/724 mm feed: Hand spindle turning speed range: 225-4300 UpM height of the machine: 1790 mm total power requirement: 1,0/1,6 kW Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dürselen Corta PB 04 Paper drilling machine Age: 1999 4-spindle Drill hole diameter: 3-15 mm Drilling distance: 31.7 – 293 mm Max. stacking height: 50 mm
Key data: 50 mm, 1600 mm
Radial drilling machine max. drilling diameter in steel 50 mm max. drilling diameter in cast iron 60 mm max. thread in steel M50 x 1.5 Spindle projection 1600 mm max. distance spindle nose to lower part plate 1505 mm max. boom height adjustment 875 mm Max. drill carriage adjustment on boom arm 1280 mm Taper of spindle Morse 5 Spindle stroke 310 mm Spindle speed infinitely variable 12 Spindle speed range 28 - 2500 1/min Max. torque 310 Nm Base plate 1820x986 mm Machine weight approx. 4550 kg
Stegherr dowel drilling machine Manufacturer: Stegherr Type: FD Year: 1995 Mach.Nr.: 35/12951 Control: Alfa-nummeric mit pre-programmed drilling patterns Alongsiide and head-tail drilling Length stopper: Left- and right digital stoppers for alongsicde drilling Head-tail: Left-Right drilling wih revolver posiioning devices Dowels: 6-16 mm Stroke: 80 mm Motor: 2.2 KW Air pressure: 6 bar Dust extraction: ø80 mm Condition: fully functional tested – fully operational
Vitap Forex 24 Manufacturer: Vitap Type: Foratrice Forex24 Machine Nr.: 790847 Year: 1999 Motor: 1.8 kW Nr. Spindel: 21+3 Head and topdrilling: Electro-pneumatic tilting Semi-automatic: Verical and horizontal drilling: RPM: 2.840 rpm Drilling dept: Max. 80 mm, with Siko counter Raster: 32 mm Spindel/group: 3-5-9 Length stoppers: both sides scale with 2 filp stops per side Clamps: 2 pneumatic clamps top-side manual adjustment Pressure: 6-8 bar Dimensions: 1.570920 mm Weight: 350 KG
Alzmetall AX3 SV Säulenbohrmaschine Hersteller: Alzmetall Typ: AX3SV Baujahr: 1996 Zustand: gut, gebraucht Drehzahlbereich: 160 ? 2250 U/min Bohrvermögen (St60) 40 mm Futter-/ Werkzeugaufnahme MK 3 Spindelhub 120 mm Ausladung 293 mm Säulendurchmesser 115 mm Abstand Spindel-Tisch min./max. 117 / 701 mm Vorschub 0,1 + 0,2 mm/U Nettogewicht ca.270 kg Sonderausstattung: ? Automatischer Vorschub ? Spindelschutz
Used, untested. MK4 recording. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-11
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50066-326
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50066-260
Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable 80 - 1170 rpm - 2 feeds 0.1 / 0.2 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - Right – Counterclockwise rotation - Keyless chuck 1-13 - Lighting
Offer 26203 Technical data: - Drilling capacity - in steel 16 mm - - in aluminium 20 mm - Drilling spindle holder MK 2 - Drilling depth 100 mm - Spindle / column projection 215 mm - 6 drilling spindle speeds stage 1 200 - 1600 rpm - 6 drilling spindle speeds stage 2 400 - 3200 rpm - Drive 400 V / 0.7 kW - Drilling table with T-slot W 250 x D 320 mm - Max. distance between drill chuck / table approx. 220 mm - Space requirement approx. W 300 x H 1050 x D 450 mm - Weight approx. 100 kg - Keyless chuck 1 - 13 mm - Coolant device - Original machine cabinet
Offer 26251 Technical data: Drilling capacity in steel ST 60 32 mm Drilling capacity in steel ST 60 40 mm Long spindle MK 3 Drilling spindle speeds infinitely variable 160 - 2250 rpm Drilling spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machined base plate with T-grooves 400 x 400 mm Max. distance from base plate to spindle 600 mm Emergency stop button E. Footswitch Space requirement approx. W 450 x H 1250 x D 900 mm Weight approx. 250 kg Keyless chuck Table base
Incl. vice, jaw width: approx. 150 mm
maximum number of results exceeded
please refine your search
950 € 
