boring and drilling used for sale

bore capacity in steel (diameter):45 mm WORKING RANGE -BORING-:. - drilling capacity full bore (steel):45 mm - drilling capacity full bore (cast iron):55 mm - horizontal travel:1050 mm - vertical travel:450 mm - sleeve stroke:200 mm WORKING SPINDLE / HEAD:. - spindle revolutions (min):15 /min - spindle revolutions (max):2800 /min - number of gears:2 - taper fixture : MK 4 :. - spindle power (continuous):5.5 kW - torque (max.):250 Nm - max. distance spindle ... clamping surface:710 mm - thread cutting attachment : yes :. TABLE:. - clamping surface (left-right):1200 mm - clamping surface (front-back):750 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:7 kW - mains power supply:9.3 kVA - mains voltage:400 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - space requirements length:3000 mm - space requirements width:3000 mm - total height:3000 mm - total weigh ...

bore capacity in steel (diameter):12 mm throat:300 mm bore stroke:80 mm total power requirement:1,5 kW weight of the machine ca.:1,2 t dimensions of the machine ca.:0,6 x 0,7 x 2,1 m Appr. 100 year old column boring machine, complete overhould and ready to operate - swivel table, base table - taper tool chuck - base motor with drive belt to overhead spindle

bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990

bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990

bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm

bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:80 mm total power requirement:1,1 kW weight of the machine ca.:195 kg dimensions of the machine ca.:530 x 650 x 1850 mm spindle speeds::355, 710, 1400, 2800 U/min Table dimensions:340 x 280 mm

bore capacity in steel (diameter):100 mm max. pitch circle:7000 mm number of spindles:2 bore spindle turning speed range:1 - 3000 U/min high speed spindle taper ISO:50 bore slide stroke:900 mm feed speeds:1 - 6000 mm/min max. workpiece weight:18000 kg total power requirement:125 kW dimensions of the machine ca.:13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device

magnetic drilling machine Brand: Stahlgruppe Type: SG450M Max. drilling diameter: 35 mm drilling diameter Power: 1600 watts Connection: 230 volts Magnet Strength: 16000 Newton Speed: 810 rpm Drilling depth: 145 mm drilling depth Includes: Oil reservoir for cooling and lubrication Security: Strap for fall protection Condition: unused, in the original packaging

magnetic drilling machine Brand: Stahlgruppe Type: SG450M Max. drilling diameter: 35 mm drilling diameter Power: 1600 watts Connection: 230 volts Magnet Strength: 16000 Newton Speed: 810 rpm Drilling depth: 145 mm drilling depth Includes: Oil reservoir for cooling and lubrication Security: Strap for fall protection Condition: unused, in the original packaging

CNC Control: BROTHER CNC-A00 X/ Y/Z Axis Travels: 480 × 360 × 410 mm Table Dimensions: 600 × 300 mm Number of Tools: 14 Spindle Taper: BT30 Max. Spindle Speed: 16,000 RPM Spindle Motor Power: 7 kVA Drilling Capacities: Steel Ø 32 mm, Aluminum Ø 25 mm, Cast Iron Ø 25 mm Tapping Capacities: steel up to M16 Included equipment: 4 BT30 tool holders, lubrication tank with pump Weight (kg): 1800 Year & Manufacturer: 2007 – BROTHER

Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.

Auction-ID: A1-44832-724

Cake cutting table for plate cakes, Fabr. Coalfish

Squeezers for fillings, Rademaker,

Glaze line, Type Jelly Power Pack JLC, Fabr. Boyens,

Hand pitter for plums and plums, with right- and left-handed handle

A second-hand line for milling and pressing fruit and vegetable pulp. The line consists of: - BELT PRESS TYPE B FRU 800 HK WITH CONTROL PROBE IN FEED HOPPER FLOTTWEG 2008 - FEED HOPPER MEGA 2012 - ROTARY SIEVE WITH EXTERNAL INFLUX DIA. DRUM 355MM LENGTH DRUM LENGTH 1600 MMDRUM 1600 MM MEGA (FLOTTWEG) 2012/14 - METERING RUNG ELEVATOR - BRUSH POLISHER MEGA 2008 - INSPECTION ROLLER CONVEYOR MEGA 2008 - FLOTTWEG SCREW CONVEYOR 2017 - PULP CONTAINER 400L - CENTRIFUGAL PUMP FOR PULP - 500L FLUSHING WATER TANK - CENTRIFUGAL PRESSURE PUMP - PIPES, FITTINGS, ELECTRICAL CONTROL CABINET FLOTTWEG 2008 - JUICE COOLING SYSTEM STM 2018 - TUBE BEAKER SPOMASZ 2018

Chocolate enrobing plant, Fabr. Savy & Goiseau, Crystal 450

Make: Siemens Built year: 2012 Alternators and 3-phase induction motors with squirrel cage rotor Alternator power: 2368 kva Motor Power: 315 kW; 1200 kW; 2500 kW. Frequency: 50 Hz and 60 Hz Class: BV and DNV Excellent condition Stocked in Europe #siemens #power #marine #vessel #ship #motor #alternator #generator

Double-sided grinding and polishing bench MEYER type SMPMasch. No. 848 Year of construction 1963Shaft diameter 50 mmGrinding wheel holder 305 mmDisc spacing 1470 mmGrinding-polishing wheel diameter max. 800 mmWorking height 550 mmSpeed 710 / 800 / 950 rpm. Drive power 2x 3 kWNet connection 380 volts, 50 Hz.- two drive motors for each working side separately- star-delta switch for each drive motor separately- speed change by folding the drive belt- dust extraction flange 100 mm-

Technical data: Manufacturer: ogp Type: Smartscope CNC 250 Year of Make: 2004 Travel distances X/Y/Z: X 250 mm, Y 150 mm, Z 200 mm Scale resolution: 0.5 μm Condition Condition: Used Functional: Tested and fully functional

Working width - 1700 mm, material in rolls, Raw material - paper (50-300 g/m²), foil (0.023-0.10 mm) Substances - solvent-based adhesive, water-based adhesive Coating type - Mayer rod, anilox roller, slotted roller Dryer - 18 m long, 7 drying sections, temperature 30°C-170°C, gas drying (blower) Roll diameter - max 1400 mm

Working width – 650 mm Material in rolls Raw material – 950-350 g/m² paper, foil Substances – solvent-based adhesive, water-based adhesive Coating type – Mayer rod, slotted roller Working speed – 0-80 m/min Dryer – 8 m, 3 sections, temperature 3°C-120°C, electric drying Dimensions – 14 m x 1.8 m x 1.8 m Roll diameter – max 1000 mm

Table with polishing and grinding machine and rag Auction-ID: A7-45768-9

Set of 8 naughty cruella and the evil queen dolls and their accessories new in original packaging Auction-ID: A1-45282-139

Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview This second-hand rotary monoblock combines a 24-head volumetric piston filler with an 8-head pick-and-place spindle capper, engineered for PET and HDPE bottles up to 1 L. Designed for industrial packaging environments, it is a robust component for a used bottling line handling non-pressurized products such as detergents and liquid soap. The machine features a painted iron frame, stainless steel panels, and a fully enclosed protective hood with safety devices, offering reliable performance in high-throughput operations. CE marking and complete documentation support integration within beverage production and home & personal care lines where non-isobaric, non-aseptic filling is required. Technical Specifications & Performance Data Configuration: Rotary filler–capper monoblock (24/8) Container materi ...

Please note; Without a scaffolding Auction-ID: A1-40105-105

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

in 2005 refurbished Still in operation: Yes Available: immediately

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Ladies and gentlemen, Below you will receive a non-binding offer for railway spare parts for all common railway coaches and railway freight wagons new and partly used: Wheelsets All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. Inte ...

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

Roller or belt conveyors shifting lengths approx. 25 m

Stainless steel pumps, Hilge, Fristam, various versions and sizes

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...

Cat. No. 09-1590-1 New Standard: - with residual outlet with inclined seat disc valve DN 50 - with cylindrical conical bottom at the bottom and top - Test pressure: 1.5 bar - permissible operating pressure: 0.49 bar - Material V2A AISI 304 - Surface inside and outside IIIC - With mannhole DN 400 with 6 screws, overpressure valve - Threaded connection connector DN 25 and with inclined disc valve DN 25 Cat. No. Content: Diameter: Ges.Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg On request with (please ask prices): Fermentation spandconnection DN 50 CIP Cleaning Fermented spundar fitting Trial tap For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight c ...

PVS Micro cut type MC 12 E to chop up and Elmolgieren of various products like ketchup / Majonäse / sauces / soups / mustard engine 9 kW of speed 3000 / U min Tichter 165 litres with Verrohrung and 3 road valves for circulation procedure Anew machine

New plastic handles for drawers, tool cabinets, etc. 380 pieces. Partially original packaged. Price reduced VS €/piece

Cat.-Nr. 09-1590-1 new Standard Features: - with outlet with inclined seat valve DN 50 - cylindrical conical head top and bottom - test pressure: 1,5 bar - max. allowable operating pressure: 0,49 bar - material AISI 304 - surface inside and outside IIIC - with manhole DN 400 with 6 srews, over pressure relief valve, thread connection DN 25, with inclinded seat valve DN Cat.-Nr. Capacity: Diameter: Total Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg Surcharges/Unit: Fermentation Lock DN 50 CIP Cleaning System Fermentation Valve Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.