boring and drilling used for sale

Spare part for Tetra Pak TBA/3 filling machine: From the TBA/3 Jaw System, pre-assembled, complete: yoke left hand and yoke right hand with left hand arm, right hand arm Condition: unused/new Intermediate sale reserved

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEHIS /1200 x 1200 Plate size: 1200 x 1200 mm Useful length: 2500 mm Chamber number: 44 pieces Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: min. 380 bar / max. 440 bar Total filter area: 110.5 m2 Cake volume totalling: 1504 litres

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800 x 800 Plate size: 800 x 800 mm Chamber number: 100 pieces Filter pressure: 15 bar

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 (Mix) Plate size: 1200 x 1200 mm Membrane plates: 54 pieces Chamber plates: 55 pieces Membrane pressure: 15 mm Filter pressure: 10 bar Closing pressure: min. 350 bar, max. 380 bar Total filter area: 242 m2 Cake volume totalling: 4320 litres Number of filter presses: 2 pieces

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 80 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.

Used membrane chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Number of plates: 35 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: automatic Filter cloths: optional Product-contacting stainless steel contactee ropes ! The facility is in very good condition.

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Useful length: 5300 mm Number of plates: 40 pieces expandable to 51 Filter pressure: 8 bar Expiration: closed Plate transport: automatic Filter cloths: optional

Attachment: Chamber filter press used Type: Rittershaus & Baldwin AEHIS 1200 Design: bridges Holm Filter plates sizes: 1200 x 1200 mm Plate number: 35 Filter plates: PP Thickness: 30 mm Schedule: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. 85 m ² Presses contents: approx. 1200 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Pump technology: optional Dimensions: L 5800 x B 1900 (2550) x H 2500 (2900) mm Accessories: filter cloth car wash, optional light barrier Extra services: On this complex warranty months 6-12. Condition: The unit is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work.

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800x800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 30 mm Filter pressure: 15 bar Closing pressure: min. 380 bar / max. 440 bar

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 128 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Complete Laser Modul for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

WORKING WIDTH: 3200 MM, MAX. LOAD: 90 KN/M,

used, kpl. 1 year warranty, plate size 800 x 800 mm, 55 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 710 liters, filter area 58m2, dimensions 6000 x 1400 x 1800 mm, weight 6500 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

<b>Features:</b> Used pallet roller conveyor from Pack & Roll GmbH Fuesse to order separately Geraeuscharm Condition: fully functional with traces of use Ideal for fast material transport Professionally dismantled and packaged Color: Silver Drive: Gravity Total 14.58m plug available <b>Technical data: </b> Dimensions of the roller conveyor Total quantity in stock: approx.: 14.580mm Length per segment: 3645mm Total width: 1150mm One brake roller is available per segment Diameter of brake roller: 90mm <b>Details of the role</b> Clamping length: 1055mm Diameter approx.: 60mm Axis distance: 130mm, adjustable Material: steel, galvanized <b>Information on the framework</b> Height: 80mm Width: 40mm <b>Pallet roller conveyor</b> The roller conveyor is ideal in the picking zone for int ...

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

2 pieces Rheinhütte - pumps

Selling complete switch production with know how. Production include: Bflvedy7tb 1. 51 moulds for plastic parts, two diferent design of switch type programs, ALL MOLDS ARE IN PERFECT CONDITION. 2. 28 stamping tools for steel parts underconstruction of bottom switches and plugs 3. Complete assembly line with tables pneumatic screv drivers delivery vibration machines for screews and other parts 4. Row half product aprox 50000 parts on stock to assemblle 5. Packed finished stock of switches ready to sell in different types and models. 6. testing equimpent for quality for switches. 7. Complete production information with buyers list , price lists. 8. Showroom glass panels with promotional complete types of switches. 9. Lot of other accessories and equipment -look attached photos many more equipment not on photos of machineenseeker only 15 photos limit. Company has ISO 9001 AND IT ...

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

Laminating rollers Billhöfer Model 102 & 104 series and maybe others Year 2005 Qty available 1 set Available Direct

MARK ANDY P5 – 430mm (8-colour) Age: 2017 8 Colour (Flexo) • Unwind Rewind ProLed System and Dryer The Cutting BST Powerscope 5000 Inspection System Sheeting station (Cross) Delam/Relam Cross cutting device 1 delivery belt Mark Andy VPM 400 Panel Mount Machine Meech web cleaning - double sided 2 PitStop trolleys to hold printing cylinder ink trays Impression and magnetic cylinders 48 impression cylinders 7 magnetic cylinders 2 ink trays with non-stick coating Servo-controlled feed unit with closed control loop 1 single-sided unwind for roll diameters up to 40 inches (1016mm), Vertical dancer system, web edge control, closed control loop 1 ultrasonic web edge control with 2 sensors 1 ultrasonic web break control Printing unit: Print and process maximum width 17 inches 431.8 mm Maximum web width 17.25 inches 438.2 mm Min. print processing width 8.5 in 216 m ...

colstress holder SK50 with inner suit thread In a suitcase with collets according to photos Special price Lid Hermle Weiler Meuser Kunzmann Wanderer Ruhla Weipert Wohlenberg

Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price

1 Post Saegeblaetter (8 Stueck) for Kaltenbach All Saegeblaetter either re-ground or Unused. 1 square diameter 560mm 5 stub diameter 500mm 2 square diameter 400mm Hole in the middle 50mm

Key data: 588 KW

TO WHOM IT MAY CONCERN ; WE VE 1 PC USED GENSET BAUDOUIN 12M26.2 -A225 GENSET AND 2 SETS USED BAUDOUIN 8M26.2 - A225 GENSETS AT OUR STOCK PLS FIND ENGINE DETAILS ON BELOW. TYPE : 12M 26.2 - A225 YOB. : 2014 ENGINE NO : 12M2342 POWER. : 588KW / 1800 RPM TYPE : 8M 26.2 - A225 YOB. : 2015 ENGINE NO : 8M262 0023 POWER. : 415KW / 1800 RPM TYPE : 8M 26.2 - A225 YOB. : 2017 ENGINE NO : POWER. : 415KW / 1800 RPM WE VE ALSO SOME NEW UNUSED GENUINE PARTS . IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US

Milk Pasteurisation Set With Seital Separator 2000-3000[tel:2000-3000] L/h Description This Combined GEA VT 10 pasteuriser with Seital Cream Separator was used on Cheese and Fresh milk products. This is ideal for a small/medium sized dairy wanting to move away from manual cleaning separators and Bach Pasteurization process gaining time, efficiency and product quality . Having a cream separator opens new markets for the dairy such as butter, cream, clotted cream, skimmed milk and zero fat milk products are some of the opportunities. Pasteuriser Make : GEA Model : VT 10 Year of Manufacture : 2005 S/N : 169/15597[tel:169/15597] Temperatures: Shown in Chart Hot Water inlet PHE Balance Tank Temperature Valve regulation Diver Valve for non pasteurised product Chart Recorder Product pumps Water Pump Stainless steel skid mounted for quick installation Con ...

Reference ID PP-47933 Category Flexo Printer Manufacturer Bobst Model 160 A-Matic and Flexo 160 Year Built 1994 Color 2 Speed 6500 sheets/h Max. size 1,600 x 1,100 mm Min. size 600 x 520 mm Condition Good Location Europe Availability - Machine Description BOBST 160 A-MATIC CUTTING MACHINE Sheet sizes: - Maximum cutting size: 1,600 x 1,100 mm - Minimum cutting size: 600 x 520 mm Cutting size with front waste: - Maximum cutting size: 1,600 x 1,075 mm - Minimum cutting size: 580 x 492 mm - Gripper margin adjustable: 15 +/- 3 mm - Thickness of corrugated board up to 9mm - Thickness of solid board from 1mm - Cutting force, maximum: (400 tons) 4MN - Production speed: up to 6.500 sheets per hour Construction year: 1994 Production country: SWITZERLAND Voltage: 480 V Frequency: 50 Hz 2 COLORS UNIT BOBST FLEXO 160 Sheet sizes: - Maximum cutting size: 1,600 x 1, ...

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A., Completely wired, 2 units available; Gross weight [kg]: 35

Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Absolute value rotary encoder, encoder, rotary encoder, encoder -Manufacturer: Andras, rotary encoder type: VDC 10-32 -ART. NO: 4626C1000000 -Quantity: 1 piece available -Dimensions: 88/60/H92 mm -Weight: 0.5kg/piece

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 6000 rpm -Torque: 3.8 Nm -Construction: B5 -Shaft: Ø 14/26 mm -Dimensions: 420/95/H130 mm -Weight: 8.1 kg

resistor, wire potentiometer, resistor -Types see pictures Price: complete Packages: 4 -Bags: 25 -Weight: 8.5 kg

Semiconductor relays, switchgear, switching components, semiconductor contactor -Manufacturer: Mosca, solid state relay AND gate -Type: ME 5499 AND gatter -Dimensions: 55/20/H75 mm -Weight: 0.1 kg

Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand-held terminal -Manufacturer: Andras, control panel hand terminal -Type: T-H3LVGA-M7 #0603LV322-U -Total dimensions: 500/460/H110 mm -Weight: 4.8 kg

Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

workbench, work table, assembly bench -Width: 1500 mm -Depth: 750 mm -Height: 785 mm -Drawers: 5 -Conductive tabletop with Anka-Plast coating -Weight: 80 kg

workbench, work table, assembly bench -Width: 1500 mm -Depth: 750 mm -Height: 785 mm -Drawers: 5 -Conductive tabletop with Anka-Plast coating -Weight: 80 kg

workbench, work table, assembly bench -Workbench: with conductive tabletop and drawer unit -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Tabletop: with Anka-Plast coating -Number: 13 workbenches available -Price: per piece -Weight: 89 kg/unit

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating

TETRA PAK A3 COMPACT FLEX 250ML AND 200ML PRISMA FILLING LINE Item #: Usm-131 Category Tetra Pak A3 CF/Flex A3 Compact Flex 200ml and 250ml Prisma Filling Line with quick Change kit. Year of manufacturing for the full line is 2016 and few working hours, just like new 1-A3 Compact Flex 200ml and 250ml Prisma Filling machine, Speed 9000 Packs per hour 2-Date Printer 3-Helix Accumulator 30 meter 4-Straw applicator TSA 30 5-Shrink 30 6-Conveyors and Paper Trolly

Salva oven and proofer Model: K-5+H-E Serial: 162.313 Stainless electric oven and proofer, adjustable temp and timer controls, up to 300'C with ability to steam, mobile, oven 3ph proofer 1ph

Concrete spraying machine Manufacturer Montanbüro Type e.B. Elefantion Unused! Other unused and used concrete spraying machines in stock Also water pumps with e.B. Centrifugal pump Flow rate 150m³ at head 750m! If you are interested, please ask! Other machines: 216 TIG welding machine Dalex TGKW 352 AC/DC 217 Dalex LDE 400 inert gas welder 218 Welding fume extraction Dalex 64111 222 items of rotary/butterfly valves 228 items filter mats for building material plants 229 items Control cabinets 230 3 items submersible pumps 231 2 submersible pumps DV80ABS 233 Centrifugal pump LHK 125x10 SE G150 234 compressed air predatory winches pulling force 10to 235 Concrete spraying machine Aliva 237 Concrete spraying machine Aliva 238 11 centrifugal pumps 240 2 high pressure pumps TP 300/42/48 213KP pneumatic 241 4 lifting/trasn sport beams pneumatic, 2x30/40 kN, witho ...