129,469 used machines on RESALE, but how to find them? Machine Search
Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting power: M 16 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds infinitely variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Mains connection: 400 volts, 50 Hz Facilities: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Stepless speed adjustment - 24 V Electric - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelled around column - Emergency-off-strike button - Motor full protection - Star handle - CE compliant
Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...
Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...
Type: MZ73031A Number of spindles 3 Distance between first and last spindle 50 mm Adjustable drilling speed Height of the working table 820 mm Table dimensions 735×440 mm Number of clamps 2 Motor power 1,5 kW 400 V Motor r.p.m. 2800 r.p.m Working air pressure 6-8 bar Weight 75 kg Transporting dimensions 900x700x1500 mm
Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...
2K52-1 radial drilling machine was built in the 80s in the USSR. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as drilling, reaming, countersinking and threading in workpieces of various sizes. All these machining processes are performed by means of a reliable, tiltable spindle with an optimised speed range. This solution enables the machining of workpieces at different angles, without the need for repositioning them. The work head with spindle moves along the arm, enabling precise setting of the drilling point. The arm, in turn, moves vertically and horizontally along the rotating column, providing great flexibility during operation. The machine column rotates around its own axis, allowing the arm to be repositioned relative to the base. The 2K52 radial drilling machine is also equipped with, among others, a work tab ...
used
GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax. Turning Length300 mmMax machining diameter320 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmWeight approx.8000 KgMovements X / Z210/810 mmCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...
used
GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...
GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...
Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm
20-90-542 Multeosill Drilling Machine WOODLAND MACHINERY (new) Type: BM21S Number of shafts 21 Adjustable drilling angle Working width 700 mm Table Dimensions 1000 × 900 mm Additional support Ruler 3000 mm Number of Pressers 2 Engine power 1.5 kW 380 V 50 Hz Required Air Pressure 8 bar Drilling Step 32 mm Weight 150 kg Transport Dimensions 1200x1000x1300 mm
Drilling bit in diferent type and zise Auction-ID: A7-46756-252
The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)
Modern, precise production column drilling machine according to proven UNIMAX 3 concept with infinitely variable feed drive, automatic tool ejector and standard chip breakage control. The digital display displays feed, speed and drilling depth. Turn switch Right/Left Run. Emergency-off-stroke button. Motor protection. Pre-configured machine with optional equipment thread cutting device, free cutting function and LED lamp. Normal drilling capacity in E 335: 30 mm Thread cutting power: M 20 Spindle: MK 3 Feed infinitely adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Extension: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Motor can be switched on pole: 0.8/1.5 kW Spindle speeds infinitely variable Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - ...
TWO SPINDLE BORING MACHINE Sr. No.: 71179 Equipment / Additional information: Tools
NEW column boring machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via central knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting power (depending on the slope): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Extension (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack - Spindle speeds infinitely variable (1/min): 20 - 2000 - Dimensions (mm): 430 x 715 x 1800 3-year warranty for single-shift operation Further TECHNICAL DATA can be found in the product sheet! DELIVERY: free house incl. packaging NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR AN OFFER! FLOTT STUE ...
Technical data: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - Feeds - Drilling spindle stroke 120 mm - Drilling spindle speeds infinitely 80 - 1400 rpm - Extension 260 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 500 x 350 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 500 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3-12 mm - Lighting
High performance column boring machine Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - Feeds 0.1 + 0.2 + 0.3 mm/U - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - Extension 280 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.4 / 2.3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - Quick-release drilling chuck - 20 pcs. HSS div. Drill 8 - 25 mm
4 adjustable spindles, pedal operation, drilling range 3-14mm, ...
6 adjustable spindles, pedal operation, drilling range 3-14mm, ...
TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)
CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)
Radial drilling table Dimensions LxWxH 600 x 750 x 550 mm Tilting 0o - 90o This radial drilling table is unused
Column drilling machine with cross table Manufacturer: Helgerit / Perfect Type BF40VS Tool holder MK4 automatic feed Handwheel for fine feed Stageless speed control Digital rev counter 2 Pole motor 2 gear gearbox lighting Notaus Special price
specifications: - Drilling capacity approx. 32mm - Drilling spindle holder MK 3 - Projection 70 mm - Hub approx. 175mm - 8 speeds approx. 10 - 420 rpm - Drive 42 V / 960 watts - Magnetic base 100 x 220 mm - Magnetic base left + right swivel drill carrier - Space required approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer – separating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space required approx. W 300 x H 350 x D 350 mm - Weight 27 Kg
Fitting drilling machine Grass BBM-R with substructure with stop L x W x H: 2.5 x 1.0 x 1.8 m Weight approx. 350 kg Year of construction 1992 The machine is in very good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12
Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition
Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...
Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic clamping ...
Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine is in good ...
Code 7418 Description 5 Spindle drilling machine Make Webo Modell B – 20 S/N Year 1975 Table 1740 x 360 mm Distance from centre of spindle to column 250 mm Spindle taper 2 MC Spindle stroke 190 mm Speeds 125 – 2000 rpm Motor 1,1 / 0,9 kW Volts 380 Volts Machine is in good condition.
Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition
Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition
Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm
Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition
maximum number of results exceeded
please refine your search
30 € 
