boring and drilling used for sale

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max. depth ...

x-travel: 3.000 mm y-travel: 2.500 mm z-travel: 2.475 mm w-axis: 800 mm rotary table: Juaristi MG-12 Rotary table surface: 2.000 x 2.500 mm T-slots: 11 T-slot - width: 170 mm table weight: 8.000 Kg table rotation: B- Achse – 0,001 ° Control: HEIDENHAIN i TNC-530 diameter of quill: 130 mm speed: 3.000 U/min tool taper: ISO 50 DIN 69871/1-B milling head: swivelling +/-: 2,5/2,5 Grad spindle drive: 30 kW transmission ratio: 2 speeds:: 0-2.500 U/min boring spindle: D`ANDREA UT5-800-S mm/min diameter: 800 mm cross travel: 250 mm Tools changer: 30 pos. Internal cooling system: 20 bar Chip coveyor: Inkl. handwheel: HEIDENHAIN HR-420 weight of the machine ca.: 45 t dimensions of the machine ca.: 9800 x 7320 x 5500 m -TS-3 head, TS-5 column and longitudinal bed INCLUDED: - Part touch probe RENISHAW RMP-60 - External coolant - 20 bar Internal coolan - protecting guards - mobile operator platfo ...

Ref. -No.: 10361 Manufacturer: SCHIESS Year of construction: 2023 Type of control: CNC Control: Siemens, Heidenhain, Fanuc - Configurable as required Storage location: Halberstadt Country of origin: Germany financing: nach Anfrage Support sleeve diameter: 130 mm X-Travel: 3000 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Spindle stroke: 800 mm B-Axis: 360 ° W-Axis: 800 mm Spindle Taper: SK50 Max. Tool Weight: 25 kg Clamping Area: 1250 x 1250 (or configurable as required) mm T - groove width: 22 mm T - slot spacing: 160 mm Swivelling: Configurable as required ° Numbers Of Tools In Magazin: 40, 60, 120, 200, 240 Spindle Speed: 2900 RPM Max. Torque: 2500 Nm Drive Capacity - Spindle Motor: 41 kW

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

Type MX5116T+ V-380 Work table dimensions 1100x700 mm Sliding table 1085х250 mm Diameter of spindle 35 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 466 kg Price 3060 Eur (EXW Jonava, Lithuania)

bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 220 mm : 425 mm table surface area: 700 x 210 mm connected load frequency: V max. distance between table and spindle-nose: 470 mm total power requirement: 1,5 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,2 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

20-75- CNC router WOODLAND MACHINERY (new) Type SX1325A-4 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 6kw+4.5kw x 3 18000 rpm. Engine Hybrid servo Control system LNC system Repeat positioning accuracy 0.03mm Work table vacuum plate Vacuum pump 11kw Maximum speed 50000 mm/min Maximum working speed 25000mm/min Resolution ±0.05 mm System resolution ±0.001 mm Code G Inverter 7.5 kw Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 2100 kg The price is 23100 Eur

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm Control: Heidenhain : total power requirement: 16 kW dimensions of the machine ca.: 5 x 4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alzmetall AB 40 SV Price 9500,-€ Drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed rate Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2.4KW Machine weight approx. 500kg

throat: 215 mm thread: M2 - M10 : 1800 Gew./h thread depth max.: 60 mm spindle: MK 2 bore depth: 90 mm : 150 bis 450 mm : 220 x 285 mm column diameter: 75 mm mm Total height: 950 mm motor speeds:: 700 / 1400 1/min weight of the machine ca.: 95 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 1 St. Number of heads vertical: 0 St. 1 Götzinger dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10 touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ---------------------- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ---------------------- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ---------------------- 1 press-in station with dowel separation and press-in cylinder item 4 ---------------------- 1 oscillating conveyor for dowels d 8 x 50 mm with feed hose into the  ...

Drilling- cutting machine Brand: Comec Type: FIMOV new machine IDEAL MACHINE FOR NARROW PART MACHINING IN THE FURNITURE SECTOR Machine can be combined with drilling units from several sides, Sawing unit for cutting the workpiece to length, optionally inclinable With magazine and automatic workpiece transport to the operator

Manufacturer: Jonsdorf, Type: JBE 10-25, Year: 1994, Control: hand, Work bays: 1, Working length max mm: 800, Dovel diameter mm: 6, Number of doveling tools: 6, Drilling beam swivel-mounted: no, Number of drill spindles: 25, Lochraster: yes, Drilling engine kW: 1,2, Working range max mm: 60, Dovel insertion: yes, Work piece clamping: yes, Work piece support: yes, Work stations: 2, Drilling depth: 50, Drilling hight: 50, Year :1994

Manufacturer: Koch , Type: SBD-B, Control: Siemens, Min.-max. working length in mm: 250-2500, Working width min-max mm: 10-150, Min.-max. workpiece thickness in mm: 10-60, Drilling support horizontal: 2, Drill gearings: 6, Drill gearings: 6, Drill support from top: 4, Drill gearings: 6, Drilling engine kW: ca.1,5, Working range max mm: 60, Dovel lenght mm: 10 X 30, Number of doveling tools: 4, Glue high-pressure pump: yes, Glue quantity setting: yes, Dowels horizontal: yes, FREE TEXT: mitMagazin und Rückführung der Werkstücke,

Manufacturer: Jonsdorf, Type: JBE 10-25, Year: 1994, Control: hand, Software: 1, Barcode: 800, Min.-max. working length in mm: 6, Min.-max. workpiece thickness in mm: 4, Variable support centre-to-centre distance mm: no, Drilling support horizontal: 25, Drill gearings: yes, Drilling supprt from bottom: 1,2, Drill gearings: 60, Drill gearings: yes, Drilling beam swivel-mounted: yes, Belt infeed: yes, Lochraster: 2, Working range max mm: 50, Part performance max/min: 50, Year :1994

Manufacturer: Hoffmann, Type: DEA, Year: ca.2000, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Glue high-pressure pump: Niederdruckbehälter, Glue quantity setting: yes, Dübeln horizontal: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dübelgrösse mm: 8 X 30, FREE TEXT: Maschine wird gereingt und geprüft vor Auslieferung, Year :ca.2000

Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994

Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991

Manufacturer: Biesse, Type: Beta, Year: 1984, Control: Elektrisch, Work bays: 1, Working length max mm: 3200, Working lenght min mm: 180, Dovel diameter mm: 8, Dovel lenght mm: 30, Number of doveling tools: 7, Lochraster: 32, Dovel insertion: yes, Work piece clamping: yes, Pneumatic clamping: yes, Work stations: 1, Wight approx. kg: 2500, Year :1984

- invoersysteem voor vlak- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Platstaal gt; maximale lengte: 15 200 mm gt; maximale breedte: 50-500 mm gt; maximale dikte: 5-25 mm Hoekstaal gt; maximale lengte: 15 200 mm gt; maximale breedte/hoogte: 50 x 50 - 200 x 200 mm gt; maximale dikte: 16 mm gt; maximaal gewicht: 750 kg Hydraulisch ponsen VPO 1000 gt; cap: 100 ton gt; perforatiediameter/dikte: 57/15 mm of 32/25 mm gt; 4 ponsunits voor vlak staal gt; 1 ponseenheid voor hoekstaal gt; incl. gereedschap Hydraulische schaar voor vlak staal VPS 2200 gt; cap: 220 ton gt; breedte/dikte: 500/25 mm gt; hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 gt; cap: 240 ton gt; 200 x 200 mm / 16 mm Hydraulische coderingseenheid VNI 1/36 gt; 1 codeerschijf gt; 36 tekens gt; tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 gt; 37 kW - 250 bar

workpiece weight: 279 KG length: ca. von Bett bis Lynette mm : 189 € . max: durchlass 369 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible.

A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.

bore capacity in steel (diameter): 30 mm x-travel: 850 mm y-travel: 435 mm Control: HEIDENHAIN TNC 150 total power requirement: 16 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A Year 1985 Serial No. 16 085 109 _______________________________________________________________ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle tape ...

x-travel: 1170 mm y-travel: 500 mm z-travel: 370 mm table load: 2 t spindle turning speed range: 25 - 2500 U/min feeds: 4 - 2000 mm/min rapid traverse:: 4000 mm/min taper ISO: 40 total power requirement: 12,5 KVA weight of the machine ca.: 4 t dimensions of the machine ca.: 2,3 x 1,9 x 1,75 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created wit ...

bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 185 mm bore stroke: 50 mm spindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min : 178 mm : 480 mm table surface area: 700 x 180 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 160 t dimensions of the machine ca.: 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 115 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 350 mm : 130 mm table surface area: 590 x 190 mm connected load frequency: 400 V diameter of hob: max. 80 mm feed: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,7 x 0,95 x 1,75 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 45 mm throat: 230 mm bore stroke: 125 mm spindle taper: ISO 30 spindle turning speed range: 75 - 1600 U/min max. milling cutter diameter: 80 mm : 560 mm : 230 mm table surface area: 800 x 240 mm max. distance between table and spindle-nose: 460 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 320 Kg dimensions of the machine ca.: 1,0 x 0,8 x 1,45 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 700 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK 3 spindle turning speed range: 50 - 3000 U/min : 280 mm : 155 mm table surface area: 500 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,8 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Table, Drilling and Tapping Machine IXION Type BT 15 GLMasch. No. Year of construction approx. 1975Drilling capacity 15 mmSpindle holder Cone holder B 16Threading from M 2.5 to M10Throat depth 200 mmPine stroke 90 mmTable size 285 x 220 mmColumn diameter 75 mmSpindle speed 320 - 1600 rpm. 4 stagesMotor power 0.55 kWNet connection 380 volts, 50 Hz- Spindle speed via 4 V-belt steps- equipped with FAHRION GH 10 tapping chuck- with guide cartridge for the thread pitch, operation without

A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.

bore capacity in steel (diameter): 13,0 mm x-travel: 300 mm y-travel: 130 mm turning speeds: 100 - 2500 U/min throat: 165 mm spindle taper MT: 3 MK table-size: 490 x 120 mm diameter of hob: 30,0 mm motor: 230 Volt total power requirement: 0,75 kW weight of the machine ca.: 50 kg. dimensions of the machine ca.: 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 45 mm quill stroke: 125 mm : 560 mm : 230 mm table surface area: 800 x 240 mm spindle turning speed range: 75 - 3200 U/min max. milling cutter diameter: 80 mm spindle taper: ISO 30 max. distance between table and spindle-nose: 460 mm throat: 230 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 580 Kg dimensions of the machine ca.: 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 730 x 210 mm connected load frequency: 400 V boring feeds:: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible.

Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement.

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.

T type milling machine TIGER TMT 5 RT - CNC SELCA 4045 - head type T30 Index 2,5°, Rotary table capacity 6.000 kg, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1550x1300 mm, Maximum table load: 6.000 Kg, Cross travel x axis: 2000 mm, Vertical travel y axis: 1550 mm, Longitudinal travel w axis: 1050 mm, Working feed x-y-w axes: 0 - 60.000 mm/1, Rapid feed x-y-w axes: 12.000 mm/1, Spindle taper: 50-DIN69871, Spindle speed: 0 - 3000 rpm, Number of spindle speeds: 2, Cnc: SELCA 4045, Weight: 15.000 Kg

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall  ...