bolt used for sale

orschubaggregate suitable as spare part for COOK + COOK BOLINDERS + MECOUTIL

tool taper: VDI 20 shaft cross cut: 20 mm tool taper: 20 ratio: 2:1 turning speeds: U/min coolant: ja / yes Boley tool holder driven d106-02, gear transmission ratio 2:1, for following BOLEY machines:Boley BC 32, Boley BC 42, Boley BE 42 good conditions, suitable for cross drilling & milling,radial 4 off on stock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU390T1166 LocationBarneveld MakeA. Bolz Wangen TypeDB-900-M3 No.M041305 Year of construction2000 Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Volume9000 Ltr. Motor30 KW Specified Features - Conical mixer MaterialStainless steel 1.4404 (316L) Density1.16 kg/dm³ Conical mixercheck Capacity9000 Ltr. (Bruto. 18000 Ltr.) Largest cone diameter3330 mm Cone height5205 mm ManholeDN700 With stainless steel armcheck Motor1: 18,5 kW, 2: 2,2 kW With variable speed drivecheck screw speed (nominal): 66 rpm, arm speed (nominal): 0,7 rpm Motor3 kW Bottom bearing pintle bearingcheck Max. temperature100 °C Bottom dischargeDN 250/300 (side) Information Total height6,5 m Weight7250 kg Floor space3,6x3,6 m ATEX compatiblecheck Extra SpecificationsThis conical mixer has also a Bolz product discharge, specifically type NW250/NW300. It can h ...

General SKU390T1165 LocationBarneveld MakeA. Bolz Wangen TypeDB-900-M3 No.M041355 Year of construction2000 Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Volume9000 Ltr. Motor30 KW Specified Features - Conical mixer MaterialStainless steel 1.4404 (316L) Density1.16 kg/dm³ Conical mixercheck Capacity9000 Ltr. (Bruto 18000 Ltr.) Largest cone diameter3330 mm Cone height5205 mm ManholeDN700 With stainless steel armcheck Motor1: 18,5/30 kW 690/400-415 Volt, 2: 2,2 kW 230/400-415 Volt With variable speed drivecheck screw speed (nominal): 66 rpm, arm speed (nominal): 0,7 rpm Motor3 kW Bottom bearing pintle bearingcheck Max. temperature100 °C Bottom dischargeDN 250/300 (side) Information Total height6,5 m Weight7250 kg Floor space3,6x3,6 m ATEX compatiblecheck Extra SpecificationsThis conical mixer is equipped with a Valve: Bolz product ...

General SKU201P110 LocationBarneveld MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Mach.No.WK 109923A / WK 340369 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity11000 Ltr (5000 Ltr nett capacity) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armwith mechanical seals Top drivecheck Motorscrew, 15,0 kW, 380 Volt (Ex) Motorarm, 1,35 Kw, 220/380 Volt (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100°C. Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information Year of construction1988 Floorspace3,1x3,0 M Total height5,5 M Weight+/- 7000 KG ATEX compatibleche ...

General SKU201P111 LocationBarneveld MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Mach.No.M1180 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity5000 Ltr. (max. 11000 Ltr.) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armcheck (with mechanical seals) Top drivecheck Motorarm: 1,5 kW (Ex): screw: 16 kW (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100 °C Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information Year of construction1988 Floorspace3,1x3,0 m Total height5,5 m Weight± 7000 kg ATEX compatiblecheckMinerals & inorganicAPISolid pharmaceuticsBiote ...

1 item = 44 drilling spindle carrier make BOLEY type W and type U1 item = 32 articulated spindles make BOLEY type W and type Uused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC

Including: Bollhoff 40690/2 Feeder Unit Bollhoff Hydraulic Power Unit Cables & Hoses

Baler Bollegraaf HBC 100 A, built in 2001 Specifications: Manufacturer: Bollegraaf Type: HBC 100 A Year of construction: 2001 Press force: 100 t Drive power: 75 kW Filling opening: 1100 x 1600 mm Capacity at 30 kg/m³: 16.2 t/h 50 kg/m³: 25 t/h 100 kg/m³: 47 t/h Bale size: 1100 x 720 mm (WxH), length variable Bale weight: 550-880 kg Binding: 5-fold vertical Dimensions: approx. 11750 x 2500 x 3470 mm (LxWxH) Weight: approx. 34000 kg

General SKU201P112 LocationBarneveld MakeBOLZ GmbH No.M 1107 T 4402 Year of construction1988 Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume11800 Ltr. Motor15 KW Specified Features - Conical mixer Conical mixercheck Capacity11800 l (gross) Largest cone diameter2900 mm Cone height4900 mm Dished topcheck Manholeø 600mm With stainless steel armcheck Top drivecheck Motorscrew +/- 15 kW (400 V) 65 rpm Motorarm 1,5 kW (400 V) 35 rpm Cantilevered screwcheck With jacket1200 l (20m2) Max. temperature100°C MaterialStainless steel 1.4552 Information Floor space3,2 x 3,2 m Total height6,5 m Weight±7000 kg Extra Specifications- used as a cooler. Minerals & inorganicPlastic & rubberPlastic & polymersDyes & pigmentsSolid pharmaceuticsConfectioneryOther feedAnimal feedOther chemicalStarchFine chemicalsSugarOrganicsCosmeticsOther pharm ...

Boley BC 32 CNC lathe Type: BC 32 Manufacturer: Boley Year: 2014 Control: Mitshubishi Counter spindle Driven tools Toolholders included Machine in good condition, under power. Find more here - / Contact us at -

Bolzoni Hydraulic Scissor Lift Table 5000 x 2400 mm Manufacturer: Bolzoni Type: Hydraulic Scissor Lift Table Load capacity: 5000 kg Useful stroke : 1360 mm Platform: 5000 x 2400 mm Electro-hydraulic power unit More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Wood drying chamber Bollmann L x W x H outside: 11.0 x 3,0 x 2,7 m Stack dimensions B x H: 1.5 x 2.0 m Weight approx. 2000 kg Built in 1982 The wood drying chamber is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.

Counter-steering machines Boley, partly incomplete

Sheet thickness: 100,00 mm Bending length: 600 mm Number of rolls: 3   MACH-id    5092 MAKE         Boldrini TYPE           PIR 600 x 100 YOP             1980 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic 3 or 4 roll        3 roll Bending length         600 mm Max. Rolling capacity Ø 2.500        100 mm Max. Prebending capacity Ø 2.500        70 mm Top Roll Ø       500 mm Side Rolls Ø     350 mm Working speed M/Min.    2.5 + 4 M/min .DIMENSIONS Length         3500 mm Width          1700 mm Height          2500 mm

Rounds: 530 mm Squares: 0 mm Flats: 150 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id    5005 MAKE         Boldrini Italia TYPE           BSA 36 YOP            SPECIFICATIONS Power        12 kW Horizontal / Vertical / or H + V    Horizontal        Shaft Diameter ø       235 mm Roll diamter  ø     530 mm Shaft length      360 mm Resistance moment Cm     3166 Cm3 Capacity IPN     220 x 4500 mm Capacity HEB      160 x 2500 mm Capacity Tube walltickness x Ø  160 x 5 mm Capacity Flatt      150 x 40 mm Hydraulic / Mechanical      Mechanical Working  ...

Guide bush COOK BOLINDERS and MECOUTIL by expert

spare parts - cook bolinders - pinch roll pivot arm - infeed bottom Feed swivel bracket bottom (front) made of ST Plate 2.2 No. 54

COOK-BOLINDERS Inlet top, left thread, L 260 mm 2 Stueck Plate 4.3, No. 12 (L)

spare parts - cook bolinders - top clamp Clamping shoe eneerone Plate 3.1B, No. 20

spare parts - cook bolinders - Hydraulic cylinder PRESSING Hydraulic cylinder pressEN

spare parts - cook bolinders - glue application with gluing combs Ccmealplm For adhesive application on compact wedge zinc systems (compact wedge zinc machine ) Praezisions glue comb system with working width max. 250 mm, 2 tine laenia 15 mm or alternatively 20 mm

spare parts - cook bolinders - Cutter hood in steel execution Fraeshaube steel-exposure old glue system Plate 4.1C, No.

spare parts - cook bolinders - bottom drive roll Feed roller below Cmtajuaa 2 Stueck Inlet, D = 147 mm; L = 233 mm; d = 35 mm Inlet, D = 145 mm; L = 240 mm; d = 35 mm Plate 2.2, No. 3

Zero point clamping system Manufacturer: Vischer & Bolli VB tools Built: 2018 Condition: unused System consisting of: 1 piece Dock Lock steel closure plate Dimensions: 600x200x85/95 mm with 2 pieces DockLock SAFE20 built-in cylinder up to 12.5 KN per cylinder 10 Mounting holes for M16-Inbus 1 piece special base plate made of steel Dimensions: 800x250x76 mm 1 piece DEUX-MILL tensioner 1 piece special base plate made of aluminium Dimensions: 600x600x40 mm 5 pieces clamping bolt SAFE20 long with centering 10 pieces clamping bolt SAFE20 long without centering 5 pieces balancing clamping bolt SAFE20 long 1 piece hydraulic pump

Zero point clamping system Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z This zero-point clamping system was used on a FIBRO rotary sliding table with a clamping surface of 2500 x 2500 mm.

Zero point clamping system Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Dimensions: 2290 x 1000 x 120 mm

CNC lathe BOLEY type BE 42 - Bi-spindle / twin-turret TECHNICAL SPECIFICATIONS: CN Type: MITSUBISHI Meldas 635LCC X1 axis stroke: 170 [mm] Z1 axis stroke: 200 [mm] X2 axis stroke: 110 [mm] Z2 axis stroke: 395 [mm] X3 axis stroke: 110 [mm] Z3 axis stroke: 170 [mm] Y-axis stroke: -/+ 40 [mm] Tool holder type: VDI 20 Spindle for clamping clamps: Size 48 DIN 6343 Spindle passage diameter: 42 [mm] Mini speed. Pin: 80 [rpm] Maximum speed. Pin: 8000 [rpm] C-axis indexing accuracy: 0.001 [°] Pin power: 7.5 [kW] Counter-spindle passage diameter: 42 [mm] Mini speed. Counter spindle: 60 [rpm] Maximum speed. Counter spindle: 6000 [rpm] C-axis indexing accuracy counter-spindle: 0.001 [°] Counter spindle power: 2.2 [kW] Maximum diameter. Machinable: 140 [mm] Number of positions - Upper turret: 12 Number of motorized positions - Upper turret: 12 Maximum speed. rotating to ...

Technical data paper shredder: Manufacturer Bollegraaf Type HBS 110 - 1500 Year of manufacture 1994 Drive power 110 kW Throughput approx. 25 t/hour Dimensions of feed hopper 1,970 x 2,000 mm Dimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H) Weight approx. 11.5 t Special features: The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with replaceable hammers that are extremely wear-resistant. Range of applications: The shredder was used to shred paper, cardboard, newspapers, magazines, books, etc. in order to achieve optimum compaction and dimensional stability of the bales in the downstream baling press. Condition of the shredder: The shredder is in good working condition and will be dismantled at the end of April. Scope of delivery: Shredder ...

Capacity: 400 t Table length: 900 mm Table width: 900 mm Stroke: 580 mm Dishing set: Dishing press Boldrini POA 400 / 6100 Dishing manipulator Bolrdini MSF/T 55 x 5700 Dishing weight 5500 Kg Max. Dishing diameter 5700 mm Min. Dishing diameter 1300 mm Weight manipulator 11.500 Kg Power manipulator 31 kW  Capacity Kg:           400000 Distance between column:6100mm Table Length:          900mm Table Width:           900mm Table Height:          580mm Ram stroke:            600mm Approche speed:        18000mm/min. Working speed:         190mm/min. Return speed:          18000mm/min. Length:                7750mm  ...

Machine name: Cone mixer / dryer Manufacturer: Bolz GmbH Type: MF 400 Year of construction: 1991 Material: Stainless steel Designation: Vertical cone mixer Design: The cone mixer is ground on the inside in korn 240 and pickled on the outside. Total capacity: 9250 litres, net capacity: 4000 litres Contact Parts: V4A 1.4401/04 (316) Dimensions: L 2800 x W 2800 x H 5000 mm Empty weight: approx. 4000 kg Tech. Documentation: Yes Remark: Field of application: pharmaceutical, food, chemical Agitator: screw stirrer Voltage: 400 Volt Motor: explosion-proof Temperature: 80 °C without pressure Accessories: Knocker Condition: Used very good Price: On request

Plate rolling machine - 4 rolls Manufacturer Boldrini Model / capacity 250046 mm Year 1977

General SKU269N248 LocationBarneveld MakeBoldt Friesland engineering bv TypeBM-1500-S22L2 No.85-138 Main Features MaterialStainless steel Volume1500 Ltr. Motor15 KW Specified Features - Ribbon blender Ribbon blendercheck Double shaftcheck Capacity1500 ltr Trough sizes1500x1150mm With covercheck Inletdia.600mm Outlet(2x) +/-500x200mm With jacketcheck With adjustable packing glandscheck Motor(2x) With variable speed drivefrequency converter MaterialStainless steel Information Mounted on framecheck With switchcheck With switchgearcheck Floor space2,6x2,0 M Total height2,6 M Weight1440 KGRibbon blendersBoldt SystemsMixers > Ribbon blendersBrand > Boldt Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...

turning diameter over bed: 250 mm turning diameter over slide rest: 150 mm turning length: 500 mm total power requirement: 3 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,5 x 1 x 1,3 m No. 4620 Lead and feed spindle lathe BOLEY 5 LZ Working range: SpH 130 x 500 Spindle speeds: in 22 steps 28 - 2550 min-1 Space requirement: 1.5 x 0.9 x1.25m Weight approx. 800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment: Heatable/coolable, Agitator, Overpressure,Manufacturer: Bolz,Condition: used,Volume: 16.150,Max. overpressure: 3.2,Max. permissible Operating temperature : 150,Design: upright,Stand shape: feet,Number of feet: 3,Heating/cooling (filter bar): available,Volume double jacket: 1,000.0,Max. permissible Operating temperature : 150,Temperature control cylinder: double jacket,Temperature control underbody: double jacket,diameter inside: 2,490,diameter outside: 2,580,cylindrical height: 2,500,total height: 5,000,Technical documents: drawing,manhole / dome: in the top floor (DN 500),nameplate: yes,outlet : 80,remarks: double jacket with trickle ring - only suitable for pressureless temperature control with 1 tank the welding of the double jacket in the upper area has come loose in places,last purpose: Dairy,Material in contact with the product: V4A 1.4571 (AISI316),Material temperature  ...

for sale wood fired coffee roaster , machine dated but excellent condition as new working , manufacturer OFFICINE ELETTRO MECCANICHE , BOLOGNA as is visible the nameplate opposite the machine , unfortunately I can not add more information because I am not an expert on such machines , the machine is located in Italy and precisimante in Lucca Tuscany , and possible to make any inspection for viewing

3 re-lathes, see pictures

Clamping bruecke outlet Plate 6.1, No.

Tooth and chain wheels for feed

D 102 x L 78 x d 90 mm, material cast iron Plate 3.1B, No. 83

D 102 x L 78 x d 90 mm, material cast iron Plate 3.1B, No. 83

TECHNICAL DATA: Dimension mm: 5000 x 2250 Payload Kg: 5000 Lifting height max mm: 2000

HAND-PALLET-TRUCK Equipment / Additional information: -Lift loads -Working at the ideal height -QuickLift -With hand-hydraulic lifting drive -Height approx. 80 cm

Sheet thickness: 100,00 mm Bending length: 600 mm Number of rolls: 3   SPECIFICATIONS Controll Conventionel Hydraulic / Mechanical  Hydraulic  3 or 4 roll  3 roll Maximum sheet thickness  100 mm Bending length  600 mm Max. Rolling capacity Ø 2.500   100 mm Max. Prebending capacity Ø 2.500  80 mm Top Roll Ø 500 mm Side Rolls Ø 350 mm  

Center height: 120 mm Center width: 450 mm Spindle passage/bore: 23 mm Board width: 100 mm Speeds: (12) 180 - 2240 min-1 Travel upper carriage: 140 mm Tailstock mount: MK 2 Quill stroke: 80 mm Motor power: 2.5 kW Connection: 400 V Dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Piercing device Quick release holder System Multifix, size Aa Machine light Coolant device

Amperage range maximum: 5000 A Amperage range minimum: 3000 A Throat: 1000 mm Welding machineBOLDRINI - PSL  Clamping machine for longitudinal seam welding Maximum working width 5000 mm in & out let table Lincoln power suply Power wace AC/DC1000 Lincoln controller Lincoln UP-Powder system New hydraulic with oil chiller

Other Info: Equipped with forming roll radius 350 head Euipped with turning cutting attachment  Machine for making smooth surface dished and flanged ends. Designed for cold & hot forming such as: ASME 2:1 Elliptical Dished only Hemispherical ASME Flanged & Equipped with forming roll radius 350 head Euipped with turning cutting attachment  Machine for making smooth surface dished and flanged ends. Designed for cold & hot forming such as: ASME 2:1 Elliptical Dished only Hemispherical ASME Flanged & Dished     Max. workpiece:        4000Ø Maximum sheet thickness:18mm Max. dishing radius:   350mm Min. product Ø:        400 Min. plate thickness:  3mm Min. dishing radius:   30mm Length:                5000mm Wid ...