boiler house used for sale

Three identical Certuss steam generators are available. Year of manufacture: 2008/2009/2010, steam output: 600kg/h, pressure vessel volume: 42.9l, set pressure: 10bar, test pressure: 57bar. Machine dimensions X/Y/Z: 1650mm/900mm/2000mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible.

Used complete steam boiler room from Viessmann. It consists of two steam boilers from Viessmann Vitomax 200-HS type M75A231. Year of manufacture 2015. CE The capacity of each boiler is 5.53 Tons of steam/h. Operating pressure 13 bar. CE

Cooking kettle Kerres FKK 250L, Natural gas heated, power 12kW, el. Connection 230V, Dimensions of kettle inside approx. 69x80x46cm, Total dimensions LxWxH approx. 95x125x118cm, weight approx. 344kg, older device, good used condition, functional, lid spring defective

Kneading dish made of stainless steel without carriage for double conical kneader DK 250, Fabr. W&P

Industrial steam boiler LOOS U-HD-1600 in excellent condition for sale. With full documentation with Weishaupt G7/1-D gas burner Manufacturer: LOOS Gunzenhausen Type: U-HD 1600 Year of manufacture: 1993 Full inspection: 2017 Boiler capacity max.: 1600 kg/h Operating pressure: 10 bar Fire output: 1186 kW Gas burner: Weishaupt G7/1-D 300-1750kw Water capacity: 1740 liters Total heating surface: 31 m² Test pressure: 18 bar Increased test pressure: 18 bar Year of manufacture: 1993 Full documentation! length: 4 meters (including gas burner) Width: 2.2 meters Ijbmrcjym Tugs Ipnstf Height: 2.3 meters Weight: 4200kg ca

F20 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa

Stainless Steel Dough Bowl with Trolley for Diosna Spiral Mixer Type SP 160 AF

F24 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fuel burner Weishaupt Monarch RGL 60/2-A, year of construction: 1991, version: ZM, output range: 800kW-6600kW, gas type: N, gas category: I, gas setting pressure range: 30mbar-170mbar, oil throughput range: 120kg/h-556kg/h. Documentation available. An on-site inspection is possible.

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Double jacket, Tiltable drum, Incl. Berief L25 lifter for 200L eurobins, Capacity: 1600 litres, Heating: steam, max. 10 bar, Power: 3 x 400V, 50Hz, Dimensions: 4000 x 2000 x 2300 mm

Capacity: 2500 kg / h, Heating: steam, Cooking time: 120 min

Terlet Terlotherm Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. This model is special designed for working under higher pressures. Patent under no. 1006155. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 45 liter. Number of scraper rows: 4. Inner vessel: 20 Bar - 200 °C - 45 liter. Jacket: Steam 8 Bar / Water 4 Bar - Steam 175 °C / Water 100 °C - 30 liter. Motor: 5,5 kW - 1.464 / 369 rpm - 400 V - 50 Hz - 10,5 A. Total height: 277 cm., Type of Machine: Scraped ...

ALL PURPOSE 2-SHAFT SHREDDER 1.250 mm.60 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 17-21 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 30 kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.25 knives in sturdy steel, 50 mm.thick, 2 hooks (f ...

Two identical Loos steam boiler systems with Weishaupt burners are available. 1) 2x Loos International U-HD 1250 steam boilers, year of manufacture: 2003, max. operating pressure: 10bar, steam output: 1100kg/h, total volume: 1365l. 2) 2x Weishaupt G7/1-D ZD-LN gas burners, year of manufacture: 2003, category: I2ELL, gas type: N, output range: 250kW-1550kW, min./max. connection pressure: 15mbar/500mbar. Both systems including condensate collector and accessories. An on-site inspection is possible. Expected to be available starting 2027.

Equipment: Heatable/coolable, Insulation, Overpressure,Manufacturer: Smeja,Condition: used,Volume: 554,Max. overpressure: 2.5,Max. permissible Operating temperature : 138,Top shelf: screwed cover,Design: upright,Stand shape: feet,Number of feet: 3,Heating/cooling (filter bar): available,Temperature control inside: solid pipe coil,Insulation: available,Insulating jacket: hermetically welded,Material insulation jacket: stainless steel,Diameter inside: 690,Diameter outside: 800,Total height: 2,300,Type plate: Yes,Outlet: DN40 DIN 11851 ,Remarks: Solid pipe coil approx. 5 turns slight metallic discoloration

Max. permissible Pressure: 24 bar Test pressure: 45.6 bar Max. permissible Temperature: 224 C Steam capacity: 12000 kg/h Total volume: 19800 l Subject to prior sale - errors possible! Internal reference number: D-1223

Max. permissible Pressure: 16 bar Test pressure: 30.4 bar Max. permissible Temperature: 204 C Steam capacity: 10000 kg/h Total volume: 16400 l Subject to prior sale - errors possible! Internal reference number: D-1224

We are offering for sale a complete used VAS thermal oil system built in 2003 thats fully functional . Technical Specifications: - Thermal output: 6 MW - Electrical output: 1.1 MW (ORC) - Year of construction: 2003 - Note: ORC module available for separate purchase System Components : - Material supply system - Firebox with grate - Thermal oil boiler, heat exchanger, and Eco unit - Thermal oil piping, components, thermal oil, and insulation - Filter system - Chimney system and flue gas ducts including insulation - ORC module and generator - Ash disposal and ash container - Hydraulic units including lines and hydraulic oil - Electrical system and control cabinets - System control including PC and software - Air compressor, dryer, compressed air tank, and compressed air lines - Aboveground heating network including insulation, heating valves, and heating pumps - Overhead crane - Water  ...

We are offering, available for immediate delivery, an Exhaust Gas Steam Boiler, removed from a well-maintained Combined Heat and Power (CHP) installation. Designed to recover thermal energy from the exhaust gases of an MTU 1,600 kWe gas engine, this boiler converts waste heat into valuable process steam, significantly improving overall plant efficiency while reducing operating costs and CO₂ emissions. Technical Specifications Manufacturer: Ambitermo Engineering Model: RSB-H e 1130 Year of Manufacture: 2012 Steam pressure: 11 bar Thermal output: 784 kW Heating surface: 292.49 m² Capacity: 6,692 litres Design temperature: 20–188°C Hydrostatic test pressure: 17.05 bar Empty weight: 10,400 kg Fuel source: Engine exhaust gases Construction Standard: EN 12952 / EN 12953 CE Certified Complete Heat Recovery Package The system includes a three-way exhaust gas dive ...

- Manufacturer: Urbas - Model: UR-FFR-3500 - Year of Manufacture: 2011 TECHNICAL DATA - Nominal thermal output: 3,500 kW - Fuel heat input: 4,000 kW - Max. operating pressure: 6 bar (test pressure 9.5 bar) - Max. flow temperature: 110 °C - Heating surface: 257 m² - Water content: 10,600 l - Empty weight: 21,000 kg - Grate area: 5.5 m² - Flue gas volume at nominal load: approx. 13,000 m³/h - Flue gas temperature: 150 °C - Fuel consumption at nominal load: approx. 2,390 kg/h - Electrical connected load (boiler incl. fuel feed): 152 kW - Fuel: untreated wood chips, bark, industrial chips (moisture 30–65 %, calorific value 1.59–3.92 kWh/kg) - Chimney: stainless steel, 17 m height, inner diameter 650 mm System Components : - Material supply system - Firebox with grate - Heat exchanger and Eco filter - Filter system - Chimney system and flue gas ducts including thermal insulation  ...

external wort boiler for brewhouse 130 hl knockout capacity;, Additional title: tube and shell heat exchanger, Pressure shell/tube: 2 bar, Volumke shell/tube: 200 l, Material: stainless steel 1.4541 (AISI 321), Base construction: vertical tube and shell heat exchanger with compensator and with support, Features: Steam- and condensate fittings; safety valvel

Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Three-pass steam boiler (Loos, 1994) with oil and gas firing for the production of 7000 kg/h of steam. The boiler water chamber holds 90 hl of water. Other components: - Combination burner (Saacke) for oil and gas firing - Gas control system - Oil supply with suction pump unit (hp technik) - Economiser (2005) with a heat output of 275 kW - Feedwater tank (Loos, 1994) with a capacity of 40 hl - Water softening system (Pentair, 2024) - Feedwater pump (Grundfos) with a power rating of 5.5 kW - Operating hours counter for oil and gas operation - Control cabinet with operating elements - Various pipework, valves and fittings, Additional title: oil- and gas-fired steam boiler of the three-pass design with an economiser, Steam capacity: 7000 kg/h, Max. operating overpressure: 10 bar, Water volume steam boiler: 9000 l, Position: lying on foundation plate, Base construction: three‑pass boiler d ...

1996UTSK-550.22 and UTSK-300.22Schmid2850 kW (550 kW + 300 kW)wood chipsSchmid UTSK-550.22550 kW1,400 l (per boiler data plate)6,000 kg (per boiler data plate)Schmid UTSK-300.22300 kWincluded3 x 8,000 l (available on request per the seller)not present

Unical MD 186 Commercial Gas Boiler Auction-ID: A1-48805-202

Description: see pictures and type plates Type 1900 Operating overpressure 6bar Content 1720l Flow temperature 100°C Heat output 1400KW

Wall-hung gas condensing boiler ecoTEC Pro VMW IT 286/5-3 H Auction-ID: A7-49228-8

Tower boiler Hybrid S 35/200 BS1 Auction-ID: A7-49228-1

Steam generation plant, comprising the following main components: - Three-pass steam boiler (Loos) for the production of 2,000 kg/h of saturated steam at rated load - Oil burner (Weishaupt) for EL heating oil with an output of up to 2,145 kW - Economiser (Loos) with approx. 30 m² of heat transfer surface area and an insulated casing - 2 feedwater pumps (Grundfos) - 1,500 l insulated feedwater tank (Loos), horizontal, with feedwater degassing, Additional title: oil-fired three-pass steam boiler with economiser, Steam production capacity: 2000 kg/h ; corresponds to a gross heat output of 1,335 kW, Max. operating pressure: 13 bar, Max. operating temperature: 195 °C, Exhaust gas loss: 4,6 %, Voltage: 400 V, Frequency: 50 Hz, Position: horizontal, Base construction: three-pass design, Features: Steam boiler; oil burner; exhaust gas heat exchanger (economiser); feedwater tank; 2 x feedwater  ...

FIRETUBE NATURAL GAS BOILER Al 25,000 kg/hr Packaged Boiler F&A 100° Packaged Firetube Boiler designed to BS-EN, with steaming capacity 25,000 kg/hr F&A 100°C feedwater temperature.

Type: MTC D 50/10E-4.1 10.81 Year of Make: 2015 Volume flow: 28m³/h Lifting height: 371.51m Electrical power: 55kW Auction-ID: A7-49594-4

Boiler Type TDC16 Design pressure:18 Max working pressure:17 Test pressure:23.4 Operating water volume 25,400 Design code:TRD Manufacturing date:2013

Height=1.4 m, Overall length= 1.11 m, Overall width= 1.46 m, Net weight= 311 kg,

Volume flow: 28m³/h Lifting height: 371.51m Electrical power: 55kW Auction-ID: A7-49594-5

Christian Carl CC raw boiler with 315l filling volume, in very good, maintained condition Diameter = approx. 100cm Total height = approx. 320cm - Height of boiler = approx. 160cm - Height dephlegmator approx. 160cm Auction-ID: A1-49805-2

Capacity: 18 bar. Steam boiler with Weishaupt burner type: G7/1-D ZMAD, power 150 - 1750kW. Heating power: 1645kW. Steam production: 2500kg/h steam, with feed water tank. Capacity: 3900 liters. Equipped with accompanying documentation folders. Auction-ID: A1-49552-92

Max Weishaupt steam oven with oil burner, in very good maintained condition Length= approx. 190cm Width= approx. 100cm Height= approx. 180cm Auction-ID: A1-49805-6

Christian Carl CC Fine Combustion Boiler with 265l Filling Volume, in Very Good, Maintained Condition Diameter = approx. 70cm Total height = approx. 335cm - Height of boiler = approx. 170cm - Height of dephlegmator approx. 165cm Auction-ID: A1-49805-3

Christian Carl CC raw boiler with 310l filling volume, in very good, serviced condition Diameter = approx. 100cm Total height = approx. 320cm - Height of boiler = approx. 160cm - Height dephlegmator approx. 160cm Auction-ID: A1-49805-1

Technical data of the blasting vessel with extraction: Capacity 80 litres. Length of the hose 2.5 m. Working pressure 60 - 125 PSI. Air consumption approx. 250 - 600 l / min Packaging dimensions 102 x 46 x 51.5 cm. Weight Approx. 36 kg Very useful for blasting places on large objects or outdoor objects. Delivery incl. microfilter with extraction. Condition: never used / new (5) Auction-ID: A7-50084-192

Technical data of the blast pot: Capacity 2 x 37 litres. Length of the hose 2.5 m. Working pressure 4 - 9 bar Air consumption Approx. 170 to 500 l/min Packaging dimensions 80 x 80 x 40 cm. Approximate weight. 36 kg Very useful for sandblasting on large outdoor objects. Condition: never used / new (5) Auction-ID: A7-50084-30