boiler 17 used for sale

The EGLI 1700 Butter Churn is capable of a capacity of 900 litre of cream with a 60% butter output. The machine materials are stainless steel 316 L at contactable surfaces with the product. The gears and motors are covered with metal with a paint coating. The machine was used for very little after full refurbishment in 2022., New control panel for the start of the churn ., Butter Churn: EGLI, Volume: 1700L total capacity, Cream capacity: 850L, S.N: DM1700UK, Condition: Refurbished , Available: immediately, Location: In stock

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit.

This FANUC M-2000iA/1700L was manufactured in 2018. A robust and reliable piece of equipment, its ideal for those looking to enhance their automation capabilities. Consider the opportunity to buy this FANUC M-2000iA/1700L. Contact us for more information.

This Arburg 470 A 800-170 was manufactured in 2008. A vertical injection moulding machine with a closing force of 80 tons, operating on 400 V 3∼, 50 Hz. It features a total connected load of 69 kVA. Consider the opportunity to buy this Arburg 470 A 800-170 vertical injection moulding machine. Contact us for more information.

Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125  ...

This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine.

This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information.

Year: 2007 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - angle-adjustable crank - pressure reducer

Key data: 175 kN, 301 g/PS, 50 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: NETSTAL Type: SYNERGY S-1750-460 Year of Make: 2004 Clamping force: 175 tons Handlebar spacing 570 x 570 mm Installation height min./max.: 400 - 700 mm Opening travel: 450 mm Screws DN: 50 mm Max. displacement: 314 cm³ Moulded part weight in hp: 301 g 2 x Core Pull Interface Robot The machine is sold without the SEPRO robot pictured. The SEPRO robot in the pictures is not included.

Manufacturer: Engel Model: e victory 170/110 Year of Manufacture: 2019 Total Running Hours: 23,838 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 680 x 740mm Closing Force: 110to Platen Spacing: 800 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 1600 Kg Automation: Linear Roboter Vipe Find more here - / Contact us at -

Manufacturer: Engel Model: e-motion 170/110 T Year of Manufacture: 2014 Total Running Hours: 6,317 Hours Condition: Very good technical condition Technical Details Drive: Fully Electric Year of Manufacture: 2014 Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 and 30mm Drive Injection Unit: Electric Construction: Mit Holme Clamping Plate: 680 x 730mm Closing Force: 110to Platen Spacing: 850 mm Drive: Electric Tool Weight Max: 1600 Kg Linear Roboter Viper Series: Viper 12 Year of Manufacture: 2014 Find more here - / Contact us at -

General SKU459W518 MakeDMN Westinghouse LocationBarneveld CEcheck TypeAL-175 dairy Main Features MaterialStainless steel Inlet diameter175 mm Specified Features - Rotating valve MaterialStainless steel 1.4552 Rotary valvecheck Rotor diameter180 mm Number of locks:8 Lock sizes175x70x80 mm Capacityca. 4400 l/h with 20 rpm Inletdia. 175 mm Outletdia. 175 mm With motorcheck Information No.RVNL161435 Year of construction2019 Floorspace0,631x0,330 m Total height0,34 m Weight100 kg ATEX compatiblecheckRotating valvesDMN WestinghouseRotary valves > Rotating valvesBrand > DMN Westinghouse What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 10000 , 11690 , 155

Presse à injecter SANDRETTO MEGA T 17750/1000 Force de fermeture : 1000 T Diamètre vis : 155 mm Volume théorique d'injection: 11690 cm3 Longueur utile de la vis L/D : 20 Capacité d'injection max : 1450 Capacité de plastification : 275 Pression d'injection : 1520 bars Zone de chauffe : 6 Puissance total de chauffage : 105 KW Epaisseur moule min/max : 450mm /1350 mm Course plateau mobile : 1350 mm Dimensions des plateaux : 1820 x 1820 mm Passage entre les colonnes : 1230 x 1230 mm Diamètre des colonnes : 220 mm Quantité d'huile contenue : 1900 L Dimensions : 15,1 x 3,15 x 2,81 m Poids total : 87 000 KG

BATTENFELD FISCHER BEKB 175 T blow molding machine - 29 kg of PE - 300 liters BATTENFELD blow-moulding machine capable of extruding parts up to 4500 mm. Machine equipped with a 40-liter accumulation head. HDPE capacity: 28.8 KG Closing force: 2 x 175 T with knee-bar locking system Machine equipped with 2 x 125 mm screws (20/D ratio) Capacity: 149 KG / H at 25 RPM Max screw speed: 40 RPM Blowing pressure: 7.5 bar (12-bar compressor available if required) 3-material volumetric screw dosing system (virgin material, regrind and colorant) Machine equipped with unloading clamp Can be sold with a RAPID GK 8045 shredder Machine sold with a 260 mm diameter die and a 300 mm die. It is possible to equip this machine with a 500 mm die.

General SKU397X1128 LocationBarneveld CEcheck Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume2470 Ltr. Surface22 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface22 m² Drying chamber capacity2.47 m³ Drying chamber sizes1560 x 1700 x 1050 mm Max. temperature20—95 °C Number of trays15 Tray sizes1550 x 950 mm With 1 doorcheck Connection for the vacuum pumpcheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information MakeVötsch TypeVHT 155/170 WW Machine number59 52600085 0010 Floorspace1,45 x 1,05 m Total height2,01 m Weight4000 kg Extra Specificationswith AUTOTHERM – Temperature controller AWF 95-36/E: Technical data: Rated temperature: 95 °C Heating capacity: 36 kW Cooling: :Indirect shell-and-tube coolingTray dryersVöts ...

General SKU252X211 MakeBuss TypeTCS30-17D No.452770 Year of construction1999 Mounted on framecheck Main Features Motor5.5 KW Inlet diameter40 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter30 mm L/D20 Number of heating zones:2 Electric heatingcheck DC-motor5,5 kW, 380 volt, 1445 rpm With variable speed drivecheck Inlet40x30 mm Feeding with hoppercheck Feeding with metering screwcheck Number of temperature controllers:2 Materialcarbon steel ST52 1.0570 Information LocationBarneveld With switchgearcheck Sizes switchgear350x250x230 mm Floorspace1,50x0,65 m Total height1,85 m CEcheckSingle screw extrudersBussExtruders > Single screw extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU245P316 MakeWerner + Pfleiderer (DE) Type175/120 No.231457 Year of construction1994 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Specified Features - Sieve granulator Granulating sievecheck Gratercheck Sieve sizesdia.130mm x180mm Sieve perforationdia.2mm With hopperDia.500mm, h=300mm Inletdia.130mm Outlet200x120mm Motor1,5 kW, 220/380 Volt (Ex) With extra sieves(4x)dia.5mm, dia.2mm, dia.1mm MaterialStainless steel 1.4571 (316Ti) Information Mounted on mild steel framecheck Mounted on wheelscheck With switchcheck Floor space0,7x0,6 M Total height1,5 M Weight160 KG ATEX compatiblecheck Extra Specifications : : : : : : : : : : : : Sieve granulatorsWerner & PfleidererSieves > Sieve granulatorsBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared  ...

General SKU383W1174 MakeHermann Waldner LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume170 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity170 l. Vessel sizesDia. 800x850 mm Dished bottomcheck Top connectionscheck OutletDN30 With jacketcheck Max. temperature150°C With propellor stirrercheck Motor0,55 kW (380 V, 950 rpm (Ex)) Speed mixing shaft0-390 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.1389 Year of construction1983 Mounted on legscheck and wheels With switchcheck Floorspace1,00x1,20 m Total height2,40 m Weight500 kg Extra SpecificationsCoating inside, outside off jacket 1.4306Stainless Steel ReactorsHermann WaldnerReactors > Stainless Steel ReactorsBrand > Hermann Waldner What y ...

General SKU426X1425 LocationBarneveld Main Features MaterialStainless steel Surface1.1 m2 Size length1750 mm Sizes width650 mm Specified Features - Vibro sieve Sieve surface1,1 m² Number of sieve decks:1 Inletø 120 mm Outlet2x ø 120 mm Drive vibro motorcheck 2x Motor0,5 kW (400 V 1410 rpm) Sieve perforation3,8 mm, 1,5 mm With extra sieve deckscheck MaterialStainless steel 1.4301 (304) Information MakeAEG Vibrationst Serial7 32609-002 Magento base g_extra_specificationsFormer Foeth SKU 093U721, sieve 650x1750mm (=1.137.500 mm 1,1 m2) Information Year of construction1997 Floor space2,3 x 1,1 m Total height1,7 m Weight350 kgVibro sievesAEG VibrationstSieves > Vibro sievesBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

cutting width: 450 mm voltage: 400 V Weight: 5500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 450 mm Weight: 5500 kg work height max.: 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU364X914 MakeDMN Machinefabriek LocationBarneveld CEcheck TypeAL-175 DAI MZC Main Features MaterialStainless steel Motor0.55 KW Inlet diameter175 mm Specified Features - Rotating valve MaterialStainless steel 1.4401 (316) Rotary valvecheck Rotor diameter175 mm Rotor width200 mm Number of locks:8 Lock sizes80 x 80 mm Capacity5,5 l/rev. Inlet175 mm Inlet flange sizes300 mm Outlet175 mm Outlet flange sizes300 mm Installation height350 mm With motor0,55 kW, 220—242/380—420 volt, 1380 rpm Rotor speed14 rpm Air purged sealingscheck Information No.122625 Year of construction2012 Floorspace0,95x0,65 m Total height0,50 m Weight120 kgRotating valvesDMN MachinefabriekRotary valves > Rotating valvesBrand > DMN Machinefabriek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

This Impulse IP-175 Yamuna piston pump is designed for vertical and horizontal drainage. These positive displacement pumps are self-priming and ideal for pumping unlimited quantities of a mixture of water and air. In addition, this pump can run dry without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , , , Multiple units in stock, , Throughput capacity: 95 m3/h, Motor brand: Hatz 1D81z, Max. delivery head: 22 MWK, Weight: 1950 kg, , Throughput capacity: 90 m3/h, Max dirt passage: 0 mm, Motor brand: HATZ 1D81z, Max. head: 22 MWK, Max dirt passage: 1500 rpm, Weight: 1950 kg, , = More information =, , Year of manufacture: 2026, Applicable material: Water, Empty weight: 1.950 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@ ...

Two pcs turbocharger cartridge for 3516 industrial engines part number 177-1009 /. 0R9809 Perfect machinery international bv + 31 78. 6158040 or whatsapp + 653549259

This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.

General SKUR1197 LocationBarneveld MakeEstrella AG (CH) Type1730 Ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume1730 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass Capacity1730mm (nett.1600 ltr) Vessel sizesdia. 970x2200mm Dished topcheck Dished bottomcheck With covercheck Top connectionsdia. 80mm (3x) dia. 100mm (2x) dia. 200mm (2x) Outletdia. 80mm Max. temperature100 degr. C Information No.84178 Year of construction1985 Floorspace1,5x1,5 M Total height3,0 M Weight850 KgPressure vesselsEstrellaTanks > Pressure vesselsBrand > Estrella What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...

NIKKEN 5 AX - 170 CNC - Rotary Table incl. Controls - Type : 5-axis CNC / rotary table -The NIKKEN / 5 AX - 170 is a compact and robust CNC swivel table for precise milling and drilling work in 4+5 axes -Complete documentation available -Rotary table / dimensions LxWxH 780x340x280mm

General SKUR1198 LocationBarneveld MakeEstrella AG (CH) Type1730 Ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume1730 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass Capacity1730 ltr. (nett.1600 ltr) Vessel sizesdia. 970x2200mm Dished topcheck Dished bottomcheck With covercheck Top connectionsdia. 80mm (3x) dia. 100mm (2x) dia. 200mm (2x) Outletdia. 80mm Max. temperature100 degr. C Information No.84176 Year of construction1985 Floorspace1,5x1,5 M Total height3,0 M Weight850 KgPressure vesselsEstrellaTanks > Pressure vesselsBrand > Estrella What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us ...

General SKU095Y843 MakeWerner & Pfleiderer TypeZSK-170 W-1750 5G Mach.No.221 071 Year of construction1986 Main Features Motor760 KW Inlet diameter170 mm L/D14 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter170mm, Screw length 2500mm L/D14,7 Co-rotatingcheck Electric heatingon housing no. 2, 3, 4 en 5 (65,8 KW) DC-motor760 KW, 6000 Volt Screw speed± 198 Rpm Used onDMD Information LocationBarneveld Without switchgearcheck Floorspace14,0x4,0 M Weight21.000 KG Extra Specifications :- Barrel material 1.8519, screw material 1.2344 DiscountDouble screw extrudersWerner & PfleidererDiscountExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU363S879 LocationBarneveld MakeBühler AG (CH) TypeCobra 251 No.7576 Main Features MaterialMild steel Motor32 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillcheck Housing dimensions dia. 250 x 600 mm Inletdia. 25 mm Outletdia. 25 mm With jacketcheck Motor32 kW 220/380 Volt Without ballscheck Information Year of constructionunknown, manufacturer plate is missing With switchgear(as is) Floorspace1,7x0,9 M Total height1,8 M Weight1350 Kg Extra SpecificationsWith additional grinding chambers (2x), motor (1x), various inserts and parts. Sand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

General SKU234S118 MakeBühler Cobra 251 TypeRWK 251 / SRk-175 Year of construction1981 LocationBarneveld Main Features MaterialStainless steel Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 220x690mm Inletdia. 25mm Outlet75x35mm Motorcheck Information With switchgearcheck Floorspace1,7x0,9 M Total height1,9 M Weight1200 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Measuring range: 16 mm Angle: 60 ° weight: 500 gr The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis KELLENBERGER Kel-Varia UR 175/1000 was manufactured in 1997. It features an internal grinding device with a tiltable B-axis and a C-axis for out-of-round grinding, complemented by a belt filter system. Consider the opportunity to buy this KELLENBERGER Kel-Varia UR 175/1000 cylindrical grinding machine. Contact us for more information.

This Impulse IP-175 piston pump is designed for vertical and horizontal drainage. These positive displacement pumps are self-priming and ideal for pumping unlimited quantities of a mixture of water and air. Whats more, this pump can run dry without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , Throughput capacity: 90 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, , = More information =, , Year of manufacture: 2026, Applicable material: Water, Empty weight: 1.220 kg, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-31 ...

General SKU357X1336 LocationBarneveld MakeBuss AG Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder MaterialStainless steel 1.4000 (410S) Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zonescheck 3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hoppercheck Buss ELS 70 Feeding with metering screwcheck 63 rpm Information TypeMDK70-17D Mach.No.942500 Year of construction1988 Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CMixing extrudersNew arrivalsBussExtruders > Mixing extrudersNew arrivalsBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for  ...

General SKU219N094 MakeThyssen Henschel TypeHU/G 1750 Mach.No.831938 Year of construction1987 Main Features MaterialStainless steel Volume1750 Ltr. Motor85 KW Specified Features - Universal mixer Universal mixercheck Capacity1750 l Vessel sizesø 1790 x 700 mm With covercheck Inlet1x ø150 mm, 1x ø 200mm, 1x ø 320mm Pneumatic operated outletcheck Outletø 250 mm With motor63,0/85,0 kW (380 V) Rotor speed± 40/80 Rpm With lump breakercheck With motor6,8/8,0 KW, 380 V Rotor speed± 1500/3000 Rpm MaterialStainless steel 1.4552 Information LocationBarneveld With switchgearcheck( as is) Floorspace3,3 x 2,0 m Total height2,8 m Weight6000 kg Extra Specificationsinside is polishedUniversal mixersHenschelMixers > Universal mixersBrand > Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

General SKUR1195 MakeEstrella AG (CH) LocationBarneveld Type1730 Ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume1730 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass Capacity1730 Ltr Vessel sizesdia. 970x2200mm Dished topcheck Dished bottomcheck With covercheck Top connectionsdia. 80mm (3x) dia. 100mm (2x) dia. 200mm (2x) Outletdia. 80mm Max. temperature100 degr. C Pressure vessels Closed vertical tankcheck Capacity1730 ltr Vessel sizesdia. 970x2200mm Dished topcheck With covercheck Dished bottomcheck Top connectionsdia. 80mm (3x) dia. 100mm (2x) dia. 200mm (2x) Outletdia. 80mm Max. temperature100 degr. C Information No.84179 Year of construction1985 Floorspace1,5x1,5 M Total height3,0 M Weight850 KgPressure vesselsEstrellaTanks > Pressure vesselsBrand > Estrella What y ...

Key data: 400 kN

Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of Make: 2012 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tibar-less Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Original Arburg tool crane Dimensions: Weight: 6500 kg Length/Width/Height: 1.9 ...

Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the sele ...

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...

Key data: 500 kN

Arburg 320C 500-170 Year of Make: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Operating hours: approx. 35,000 h in automatic mode Control with air valve Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2310 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW All offered machines are started by our service technicians before they are sold. It is possible to re ...

Arburg 320C 500-170 e² / Hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air Valve x 2 Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All offered machines are started by our service technicians before they are sold. It is possible to rec ...

Module was changed because a PCSS conversion took place on the machine and therefore this module no longer fits. Fully functional.

Key data: 1600 kN

Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/hp Built-in Arburg c ...

EA Electro-Automatic EA-EL 9080-170 B Laboratory Power Supply EA-EL9080-170B | EA-EL 9080 Item Condition: Used 6.3A 2400W PD 7,00 Financing by our bank is also possible. komplett-konzept.leasingo.de You can find more laboratory power supplies - new and used - in our shop! International shipping costs on request!

Diessel stainless steel vessel 170 Ltr. with propeller stirrer and heating for oil phase, works on atmospheric pressure, on wheels, down outlet diameter 26mm

Key data: 1237 KW, 1650 kVA, 10500 V

Introducing the new Caterpillar Gas Generator, Model CG 170-12, manufactured in March 2017. This generator is in new and unused condition, with the following specifications: - Power: 1237 kW - Speed: 1500 RPM - Alternator: Marelli Motori (Made in Italy) - Output: 1650 kVA - Voltage: 10,500 - Frequency: 50 Hz - Serial Number: 2213373 If you have any questions, please get in touch with us. #caterpillar #energy #power #gas #gasgenerator #new

Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.