boiler 17 used for sale

Height=0.9 m, Overall length= 0.85 m, Overall width= 1.68 m, Net weight= 4 kg,

Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display

Carnaghi Ø 1700 mm CNC Chuck dia.: 1600 mm Max turningdia -- passage: 1700 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 2600 Turret: yes Qty Tools: 7 Coolant pump: yes

Inv. Num. : 8726 Type: VL 1750 Producer: Koplast Created: 2009 Parameters: Total power: 39.6 kW Length: 3200 mm Width: 2300 mm Height: 2950 mm Weight: 1500 kg Equipment: Technical documentation The machine is equipped with: Digitally controlled top and bottom heating BECKER vacuum system Infinitely adjustable table stroke Manual and automatic control Suitable for plastic molds (PVC/PMMA/PET/PC/ABS...)

power capacity: 7,5 kW feed pressure: 10 bar volume capacity: 815 dm³ /min total power requirement: 7,5 kW weight of the machine ca.: 0,4 kg Alup piston compressor - Tank 350 liters - Soundproof housing (68 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Distance between points: 1000 mm, Height of points: 175 mm, cnc brand: FANUC, cnc model: Oi-TD

Key data: 20000 kN

Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021

B&A REF:  9237 TON: 320 SCREW DIAMETER:  70MM SHOT WEIGHT: 1078 STROKE VOLUME:  1185CM3 INJECTION PRESSURE:  1500AR PLATEN SIZES:  980 X 980MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE:  710MM MAX DAYLIGHT:  1440MM EJECTOR STROKE:  240MM CONTROLS: SEF 200 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 22KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE:  HYDRAULIC

length: 1700 mm width: 600 mm height over floor: 860 mm table load capacity: 400 Kg dimensions: 1700 x 600 x 400 m weight: 70 kg Workbench with 6 drawers and solid wood worktop Door compartment dimensions (W x D x H) 940 x 400 x 440 mm Small drawer dimensions (W x D x H) 460 x 400 x 120 mm Height adjustment: max. 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TAURUS shear baler Year 2006 1700 ton cutting force Working hours about 3,500 Side compression force 2x250 longitudinal compression force 150 tons. Machine in very good condition Always serviced and serviced regularly It is sold with its 805 kw Perin generator with a 3000 liter tank

Screw Diameter: 160 mm // Output Capacity: 1400 kg/h

TGW alignment conveyor inclined roller conveyor 1750-475-420 RA2406 Make: TGW Year of manufacture: 2012 Roller width (RB): 420 mm Nominal/outer width (NB): 475 mm Length: 1750 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 130 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 1750 Nominal / outside width in mm: 475 Roll width in mm: 420 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simpl ...

Year: 2016 - technically efficient, ready to work – after full service - profile supports - lowered thrust unit

sweeping width: 1750 mm weight of the machine ca.: 300 kg dimensions of the machine ca.: 2100 x 1450 x 1000 mm Sweeper for forklifts, wheel loaders, Hoftrac, working width 1750 mm, dirt collection tray 250 liters, with level compensation and front support wheel, PPN sweeping roller 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilt adjustment, height-adjustable support wheels with metal rims, hydraulic drive, hoses, and couplings. Extra bearing on hydraulic motor, drive pockets W/H: 200x70 mm. - Made in Germany The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU294T681 LocationBarneveld TypeLRK177-1092/0.37 No.180245 Year of construction1998 Main Features MaterialStainless steel Motor0.37 KW Length460 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length460 mm Sizes stirring headdia. 160 mm Motor0,37 kW 230/400 Volt (Ex) With variable speed drivecheck Speed mixing shaft177-1062 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace0,9x1,1 m CEcheck Total height1,5 m Weight150 kg ATEX compatiblecheckStirrersGeppert RuhrtechnikMixers > StirrersBrand > Geppert Ruhrtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKUR1196 LocationBarneveld MakeEstrella AG (CH) Type1730 Ltr. No.84177 Year of construction1985 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume1730 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass Capacity1730 ltr. Vessel sizesdia. 970x2200mm Dished topcheck Dished bottomcheck With covercheck Top connectionsdia. 80mm (3x) dia. 100mm (2x) dia. 200mm (2x) Outletdia. 80mm Max. temperature100 degr. C Pressure vessels Closed vertical tankcheck Capacity1730 Ltr. Vessel sizesdia. 970x2200mm Dished topcheck With covercheck Dished bottomcheck Top connectionsdia. 80mm (3x) dia. 100mm (2x) dia. 200mm (2x) Outletdia. 80mm Max. temperature100 degr. C Information Total height3.0 M Weight850 Kg Floorspace1,5x1,5 MPressure vesselsEstrellaTanks > Pressure vesselsBrand > Estrella What ...

General SKU234S117 LocationBarneveld MakeBühler Cobra 251V TypeRWK 251 / SRK 175 No.10078796 Year of construction1979 Main Features MaterialStainless steel Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 220x690mm Inletdia. 25mm Outlet75x35mm Motorcheck Information With switchgearcheck Total height1,9 M Weight1100 Kg Floorspace1,6x0,9 MSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU205T042 LocationBarneveld MakeDMN Westinghouse TypeAL-175-3N No.951122 35422 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter250 mm Specified Features - Rotating valve MaterialStainless steel Rotary valvecheck Rotor diameter180 mm Rotor width220 mm Number of locks:9 Capacity5,5 Ltr./rev InletØ 175 mm Inlet flange sizesØ 315 mm OutletØ 175 mm Outlet flange sizesØ 315 mm Installation height1200 mm With hopper(dust filter) With motor0,37 kW 230/400 Volt Outside bearingscheck Air purged sealingscheck Information Floorspace1,2x0,9 m Total height1,2 m Weight250 kg Extra Specificationswith dust filter and pneumatic cleaningRotating valvesDMN WestinghouseRotary valves > Rotating valvesBrand > DMN Westinghouse What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping ...

General SKU262X272 LocationBarneveld MakeCTS No.0133 Year of construction2001 Pressure Working pressure shell3.3 Bar Vacuum possible shellcheck Working pressure tubes5 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface17 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Horizontalcheck Heating surface17m2 U-typecheck Tube diameter40 mm Tube length3200 mm Wall thickness tubes2,7 mm Max. temperature+10°C/+90°C Shell diameter730 mm Shell length2900 mm Max. temperature+10°C/90°C Shell connectionsDN40 Cover connectionsDN40 Information Mounted on framecheck Mounted on legscheck Floorspace3,30x1,15 m Total height1,80 mShell and tube heat exchangersC.T.S.Heat exchangers > Shell and tube heat exchangersBrand > C.T.S. What you can expect from Foeth: -- Machine i ...

Introducing the CNC Machining Center with FANUC Control System, designed for precision and efficiency in industrial applications. This machine features an extensive axis travel of 1700 mm (X-axis), 750 mm (Y-axis), and 700 mm (Z-axis), accommodating a wide variety of machining tasks. The robust spindle operates at 12,000 rpm, ensuring high-speed performance with a BT50 tool holder and a 24-slot tool magazine for versatility and reduced downtime. The large worktable supports complex operations, and the included 4th axis enhances multi-dimensional machining capabilities. This equipment is maintained in excellent condition, ready to meet the demands of modern manufacturing environments. Available now for immediate shipping to enhance your production facility.

Magnet L x W x H: 1.075 x 1.710 x 353mm. - Belt: 1.800mm. (new) - AA.: Ca. 1.850mm. - Weight: 3.280 kg.

Max. saw blade diameter: 420 mm Cutting height: 170 mm Mitre range swivel with digital display: 45°-90°-25° Miter range tilt with digital display: 90°-45° Hydraulic feed brake Pneumatic material tensioners Saw blade spraying device Hand crank for tilting

Engine Brand: DEUTZ, Conditie: USED, Nominal Power @ Nominal Rpm: 173 Kw, Bore: 125 mm, Stroke: 130 mm, Engine Capacity: 12763 cc, Qty Cylinders: 8 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Air Cooled , Engine Color: Grey , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-f8l413f-173-used-eng ine/640, , = More information =, , Type: Engine, Empty weight: 870 kg, Type number: F8L413F-173

Engine Brand: DEUTZ, Conditie: USED, Nominal Power @ Nominal Rpm: 173 Kw, Bore: 125 mm, Stroke: 130 mm, Engine Capacity: 12763 cc, Qty Cylinders: 8 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Air Cooled , Engine Color: Grey , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/used-deutz-f8l413f-173-eng ine/451, , = More information =, , Type: Engine, Empty weight: 885 kg, Type number: F8L413F-173

Mäder DLP 1700 HV Direct Acting Air Press Press Direct-acting air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing pins, bushings and ball bearings or when forming. DLP 1700 HV Direct-acting compressed air press Compressive force at 6 bar: 17 kN Working Stroke: H mm: 40/60/80 More items - new and used - can be found in our shop! International shipping costs on request!

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 173 Kw, Bore: 125 mm, Stroke: 130 mm, Engine Capacity: 12763 cc, Qty Cylinders: 8 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Air Cooled , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-f8l413f-173-used/108 , , = More information =, , Type: Engine, Year of construction: 1010, Type number: F8L413F-173; Transport weight [kg]: 800

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 253.5 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 256 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3196-2xr-17736 27-used/642, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 2XR-1773627; Transport weight [kg]: 1290

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 253.5 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3196-2xr-17736 27-used/542, , = More information =, , Type: Engine, Type number: 2XR-1773627; Transport weight [kg]: 1275

Engel E-Victory 170H/50V/120 combi (2015) 2k machine Robot Engel Viper 20 Linear CC300 controll Clamping force: 1200 kN Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 21.361 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h

Converters Frequency Converters, Frequency Converters, Drive Inverters -Manufacturer: Himmel Tübingen -Type: 2GL 132/175-1.JPG 132/240 -TUmformer No.: 393 733 A 12 -Input: 380V 50Hz -Output: 165V 300Hz -Power: 11 KW -Dimensions: L950/D440/H340 mm

An external cylindrical grinding machine Kellenberger is available. Distance between centers: 1000mm, center height: 175mm, max. workpiece diameter: 250mm, travel X/Z: 1000mm/220mm, grinding wheel diameter: 500mm, speed: 1530rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1750mm, weight: approx. 3150kg. A viewing on site is possible.

Haco PPM 175 ton x 3600 mm Capacity: 175 ton x 3600 mm Backgauge: electric Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

General SKU401X1198 MakeLytzen LocationBarneveld CEcheck TypeLDF-1760 Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume1820 Ltr. Pressure1 Bar Specified Features - Autoclave Horizontal autoclavecheck (Dry Heat Sterilizer) Notified bodyLytzen A/S, Denmark Capacitymax. ± 1820 Ltr. Internal width1000 mm Internal depth1400 mm Internal height1300 mm Inlet/Outlet1300 x 1400 mm Max. temperature150 °C Electric heatedcheck Electric capacity30 kW Insulatedcheck MaterialStainless steel 1.4301 (304) Information No.A20191064 Year of construction2020 Mounted on stainless st. framecheck With switchcheck With switchgearcheck Floorspace1,6 x 1,4 m Total height2,3 m Weight1400 kg Extra Specifications Recirculation fan motor: 3.0 kW Overpressure fan motor: 0.16 kW Cooling method: air cooling through exhaust air exchange when the damper is op ...

Dimensions (L/W/H): 2100x1900x1980 mm Weight: 3500 kg Total power requirement: 77,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x2170x2080 mm Weight: 4250 kg Total power requirement: 81 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25435 Specifications: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Left + right screwed rectangular tube 200 mm each - Thickness of the top plate approx. 80 mm - 6 T-slots in table surface length 3500 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. 35 / 60 mm - T - groove depth approx. 60 mm - Space required: L 3500 x D 2100 x H 350 mm - Weight approx. 4200 kg

Offer 25387 Specifications: - Drilling capacity in steel 60 mm - Drilling spindle holder MK 5 - Drilling spindle stroke 300 mm - Digital positioning indicator for stroke and position - Projection 1600 mm - Column diameter 350 mm -Max. Distance: spindle – base plate 350 - 1650 mm - Vertical stroke of the boom 1250 mm - Spindle speeds: infinitely variable 30 - 1500 rpm - Feeds infinitely variable 1 - 600 m/rev - Drive 400 V / 8.9 kVa - 2 x dice table - Coolant device - Space requirement approx. W 2490 x H 2980 x D 1060 mm - Weight approx. 3800 kg

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center of spindle to wall or column: 235 mm Column diameter: 60 mm Size of table plate: 290 x 290 mm Motor output: 1 kW Speed: 50 - 4000 U/min. weight of the machine ca.: 72 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PRO The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss Type: PT170S Box profile: 170 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 4,000 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Note: Despite the holes, the functionality of the trusses is guaranteed! The trusses come from a BITO project with heat dust layers that are were screwed together! Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with  ...

AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...

Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement.

Max capacity: 750 m³/h, Max delivery head: 22 MWK, Max free passage: 75 mm, , In stock, available immediately, , Throughput capacity: 750 m3/h, Max dirt passage: 100 mm, Motor brand: ABB MBT200L, Max. head: 22 MWK, Weight: 1200 kg, , = More information =, , Year of manufacture: 2005, Applicable material: Water, Empty weight: 1.200 kg, Connector size: 10 inch, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, jus ...

Arburg 173.411 Aggregatkarte Multronica Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: - Type: 173.411 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referee: 11000423

Two 1-needle lockstitch industrial sewing machines Juki are available. 1) Juki PLC 1760, year of manufacture: 2006. 2) Juki PLC 1710, year of manufacture: 2009. Documentation available. An on-site inspection is possible.

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU383U1044 LocationBarneveld CEcheck MakeNabertherm TypeRS 170/750/13S H2 Pressure Vacuum possiblecheck Main Features MaterialGlass Volume25 Ltr. Max.temp.1300 °C Specified Features - Drying oven Drying ovencheck Vacuum drying ovencheck Max. temperature1300°C Number of compartments:1 Capacity±25 Ltr. Internal diameter115 mm Internal width2380 mm Electric heatingcheck Electric capacity13,5 kW, 400 volt Number of doors:1 With air circulationcheck With fancheck Suitable for nitrogencheck hydrogen With timercheck MaterialHeat-resistant stainless steel 1.4767, Glass Information No.232933 Year of construction2012 Mounted on frameOn wheels With switchcheck Floorspace2,90x1,30 m Total height1,6 m Weight900 kg Extra SpecificationsThe RS tube furnaces can be used for horizontal operation. This professional tube furnace can be optimally configured fo ...

High-pressure pump in the container with ES 2 control – immediately ready for use For sale is a powerful high-pressure pump in a container, equipped with ES 2 control. The system is technically tested and 100% ready for use. Technical data: Machine number: A8.01174.xxxx WP 2250 / 2500 bar Flow 38 /34 lpm Registration date: 10/2008 Total operating hours: 11,960 h Drive: Caterpillar C7 engine Power: 186 kW Engine completely renewed at 10,350 operating hours High Pressure Pump: Sleeves and pistons operating hours: 2,870 h Condition & Notes: Used, technically flawless Regularly serviced Ready to use Ideal for industrial high-pressure and cleaning applications Financing: Financing possible (by arrangement)