boiler 17 used for sale

Food shelf, kitchen shelf, catering shelf -Dimensions: 1060/650/H1760 mm -Shelf spacing: 370 mm -Material: Aluminum -Weight: 42 kg

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Rated Power: 154.8 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 179 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 258 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-c6-6-generator-179 kva-used/393, , = More information =, , Empty weight: 1.732 kg, Type number: C6.6 Generator 179KVA

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 170 mm -Dimensions: 550/200/H165 mm -Weight: 50 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1750 mm -Length: 1400 mm -Elevation: 840 -with: supporting ribs -Weight: approx. 1000 kg

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 3890 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: No Starter Present , Rated Power: 1765 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 2200 , Generator Hz: 60 , Generator Volts: 440 , Generator Amps: 4011 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3516b-9an-1743191- used/22404, , = More information =, , Empty weight: 16.000 kg, Type number: 9AN-1743191

geared motor, electric motor -Speed: 13 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54/65 -Number: 2x motors available Price: per piece -Dimensions: 430/200/H180 mm -Weight: 17 kg

geared motor, electric motor -Speed: 13 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54/65 -Weight: 17 kg

geared motor, electric motor -Speed: 70 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x motors available Price: per piece -Dimensions: 460/204/H210 mm -Weight: 18 kg

Branch module -Type: FRM-D-MIDI 170685 -Series: T743 -Pmax: 16 bar -Weight: 0.7 kg

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 207 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1605.5 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1750 , Generator Hz: 60 , Generator Volts: 3300 , Generator Amps: 306.1 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3516-generator-175 0kva-used/279, , = More information =, , Empty weight: 16.380 kg, Type number: 3516 STD GENERATOR 1750KVA

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3512-8br-17552 85-used/266, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 8BR-1755285

Grinding drum, deflection drum, belt grinding machine, belt sander -Drum is for a husband grinder -Drum width: 170 mm -Drum: Ø 200 mm -Eccentric adjustment with touch clock -Number: 2x drums available -Price: per piece -Dimensions: 200/290/H280 mm -Weight: 13 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower, silencer, exhaust silencer, blower silencer -Silencer: Blower silencer -Input/output connection: Ø 210 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 336 x 1790 mm -Weight: 50 kg

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 00 , Flywheel SAE: SAE 21 , Working Hours: 47808 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/218645, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3516 2FW 174-4953; Transport weight [kg]: 8750

POLAR 176EMC 1993 Autotrim Air tables Polar lift Jogger RA Transomat

; Gross weight [kg]: 12692; Engine: Cummins KTA50-G23; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger

EHT VarioPress 175-35 CNC press brake was built in 2004 in Germany by EHT Werkzeugmaschinen GmbH (now TRUMPF). The machine is designed for precision machining of workpieces with a maximum length of 3550 mm. The machining process is performed with a high press force of 175 tonnes, which, combined with an extremely stable design, guarantees excellent bending results, even during the most intensive challenges. All this is complemented by the advanced CYBELEC control system, which significantly facilitates the daily operation of the machine. The EHT VarioPress press brake weighs 14900 kg. Technical specifications of the EHT VarioPress 175-35 press brake - CNC controller: CYBELEC DNC 1200PS Eco/Col - maximum press force: 175 t - maximum sheet metal length: 3550 mm - front supports - connection power: 20.5 kW - current protection: 63 A - control voltage: 24 V - power supply: 3x 400  ...

Automatic Transfer Switch - ATS Panel - ATI Panel, 250 Ampere - Applicable for generators up to 175 kVA; Gross weight [kg]: 75; Registration Number: 4

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

We sell 2x Knorr-Bremse compressors here. The following data: Suitable for RVI MIDLUM PREMIUM Manufacturer Part Number: KNORR LK4944 | K017527X00 Compressor-Air, Capacity 720cm³, Number of Cylinders: 2, Cooling: Liquid, Price is unit price. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response te ...

Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 170 to CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Offer : Manufacturer : BSS Material Flow Model : SPC 1700-600-A4-2T Type : Spiral Conveyor Belt width 600mm Device available from 01.08.2025 Total available Almost identical 3 piece(s) -------------------------------------------------------------------- Furthermore, from location . Fully driven roller conveyor Approx. 670m total length Year of construction 2017 Roll width 600mm Consisting of - Different element lengths : 3m elements / 2m elements / 1m elements - 16 scales - 15 curves of 90° each - approx. 20 rollers stroke - turner / corner turner - 3 x Apollo spiral conveyors Location : 42781 Haan Ready for collection from 01.08.2026

Height 1200 mm Width 1250 mm Length 1750 mm Weight 600 kg Capacity 3500 kg/h Power supply: 400V 50Hz 3N Total power 52 kW Cutter Type Through Cutter Cutter design Stainless steel, acid-resistant Knife shaft speed 2970 rpm

Transnorm conveyor belt GF 1700-700-600 RA2059 Technical data: Conveyor length (NL): 1700 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,92 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1700 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,92 scope of d ...

Specifications: Clamping plate dimensions: 2050 x 1000 mm Panel thickness: 170 mm T-slots: 15 / 25 mm Dimensions (length x width x height): approx. 2050 x 1000 x 170 mm The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Cast iron control/tracing marble Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T

NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1750 Year of Make: 2004 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 4,300 mm horizontally underfloor, then increasing over a length of approx. 6,300 mm, Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 1,027 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers, - Belt routing in a neutral zone to avoid stretching tensions, - Chain type M-80 with case-hardened bushings, bolts and roller ...

description: For printing of labels, bottles, packaging etc: prints only in black colors, incl. frame Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

; Gross weight [kg]: 125; Registration Number: 1; Engine: GX 390; Accessories: Tanker, Battery, Sockets for welding cables, Socket 400 V 16 ASocket 230 V 16 A, Overload protection, Oil level sensor, Silencer with exhaust adapter; Water Tank Volume [l]: 45

; Gross weight [kg]: 114; Engine: GX 390; Accessories: Tanker, Battery, Sockets for welding cables, Socket 400 V 16 ASocket 230 V 16 A, Overload protection, Oil level sensor, Silencer with exhaust adapter; Water Tank Volume [l]: 45

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Manufacturer: Bürkle, Type: Chromwalze für SLC 1300 174 D/1416 mm länge, FREETEXT1: Länge 1416 mm, FREETEXT2: Durchmesser 174 mm,

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

x-travel:1000 mm y-travel:800 mm z-travel:800 mm weight of the machine ca.:24000 t dimensions of the machine ca.:ca. 7,8 x 6,1 x 3,4 m m

Manufacturer: Dannfoss, Ersatzteil aus Maschine: Frequenzumrichter, Type: VTL 3006 175H7264, Menge: 3, Kw output: 7,2 / 9,2 kVA, FREITEXT1: 10/13 A,

Key data: 17000 kN, 120 mm

Key parameters: - Clamping force: 17,000 kN (1,700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Shot volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection capacity: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum panel spacing: 3,350 mm - Panel size: 2,420 × 2,170 mm - Drive power: 176 kW - Control: ENGEL CC300 - Control language: English Equipment of the machine: - ENGEL ecodrive servo hydraulics for energy-saving operation - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interface set - Extended tool cooling system - Special design for the automotive industry - Documentation in  ...

Flour scale BÜHLER MWBL-EE 170, Sumtronic II MWEE Solenoid valves 24V Inlet tank Dosing Cell Wheel 0.55 kw-41 rpm Good condition

We are selling here a bone saw from the manufacturer Berkel, type BS 1750 RN in a very good used and functional condition. The machine runs on 400 volts, 1.1 kW, identical to Mado MKB 649, completely stainless steel, table 55x50 cm, workshop tested, immediately ready for use, dimensions W/D/H 55/50/90 cm, others on request.

Manufacturer: Weiss Spindle Type: 175389A Condition: presumably repaired Functional test could not be carried out. From warehouse liquidation. Location: Stuttgart

Manufacturer: Hüller Hille Model: NBH 170 Year of Manufacture: 2000 Type of Machine : 4-Axis Horizontal Machining Center Technical Details: - Travel Path: 1000 x 800 x 800 mm - Spindle: HSK-A100, 8,000 rpm - Automation: Rotary pallet storage system with 7 pallets - CNC Control: Siemens 840D - Tool Capacity: 200 tools - Condition: Fully overhauled in 2022 Find more here - / Contact us at -

Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible.

Labeller Manufacturer BBK Type PAX 170 4R Year of construction 2010 Self-adhesive label labeller Roller diameter max. 285 mm, core diameter 76 mm, width 104 mm Label length min. 15 mm – max. 150 mm, width 100 mm Ribbon Outer diameter 101.6 mm, core diameter 25.4 mm, length 900 m Machine: length 700 mm x width 700 mm x height 1720 mm weight 130 kg

capacity 90 degrees: round: 172 mm capacity 90 degrees: square: 170 mm : 170 x 170 dimensions of saw-band: 2035 x 20 x 0,9 mm dimensions: 430 x 960 x 520 m band speed: 30 - 80 m/min total power requirement: 1,5 kW weight of the machine ca.: 38 kg SPECIAL PRICE Berg & Schmid - Assembly band saw PBS 171 ESC Powerful and particularly robust metal band saw Aluminum die-cast saw table and infinitely variable cutting speed for Miter cuts up to 60° Optional: machine base type 20508 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units each with 1667W, 400 V ( length 2360mm ) Air flow for this system is: 3m3 /sec or 10.000m3 /hour 2 fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible.

Description: external data input station for use with Vollmer ND brand saw blade handling systems. Serves for individual input of the various processing steps of a saw blade. The data input station with integrated router takes over the interface between the machines, to the customers own server or PC

A high-performance Drais bead mill for the chemical-cosmetic industry is available. Flour chamber volume: 15l, operating temperature: 98°C, speed: 1470rpm, flow rate: 2500l/h, power: 45kW. On-site inspection is possible.