boiler 17 used for sale

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

N. 14 cut bar trolleys Measurements: 1.77 width x 2.07 depth x 2.3 height m. Each slot is calibrated to 10 kg.

Gear motor, electric motor -Speed: 62 rpm -Power: 0.37 kW -Construction: B3/5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Dimensions: 385/190/H200 mm -Weight: 15.8 kg

geared motor, electric motor -Speed: 85 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Price: per piece -Quantity: 1 available -Dimensions: 450/205/H200 mm -Weight: 20 kg

Cream Separator 8500 l/h to 10,000 litres per hour Make : Westfalia Model : MSE 85 -01-177 Y.o.m : 2008 Condition : Very Good Tools, Control panel, Manual Book , Base Plate Contact us to arrange a visit at our facilities in Derby

x-travel: 800 mm y-travel: 630 mm z-travel: 800 mm Control: Siemens type: 840 D size of pallet: 500x630 mm numbers of pallets: 8 : 360 ° turning speeds: 6000 U/min Table load: 800 kg spindle taper ISO: 50 Tool changer: Pos. chip conveyor: Feed: 1-36000 mm/min Cooling through the spindle: 50 bar total power requirement: kW weight of the machine ca.: 19,5 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -Dimensions: 175 x 26 mm -Total length: 315 mm -Weight: 8 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -divided -Tool: 82° -Dimensions: 170 x 60 mm -Total length: 2540 mm -Lengths: 20/40/80/160/320/640/1280 mm -Weight: 88 kg

1 SULZER VAUPEL label rapier loom type G6500 S190 N8 J and EWM 80-175E, year 2008, weaving width 168 cm, BONAS electronic jacquard type ZL 2L-24, 2304 hooks, BONAS Series 800 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

Anton Paar DM 4500 Density Measuring Device Option: RXA 170 refractometer Density determination measuring range 0.6-2g/cm3 Temperature range 5-70 Celsius Sample quantity 1 ml Price without RXA 170

Slack adjuster manual, slack adjuster, brake slack adjuster, brake adjuster -Number: 5 pieces available -Price: per piece -Dimensions: 310/160/H50 mm -Weight: 3.6 kg/piece

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 170 mm -Width: 32 mm -Number: 1x discs available -Price: per piece -Weight: 1.4 kg

Flour scales BÜHLER MWBL-EE in various sizes from 60 to 170 The precise electronic weighing system for in-house product control. Continuous scales for actual weight recording. Weighing capacity from 0.1 to 50 m³/h. In the case of flour, this corresponds to an output of up to 23 t/h. Control Sumtronic II MWEE Modernization of the control system on MEAG possible. If required, with dosing cell wheel. The systems can also be used for other bulk materials. Simply enquire and explain your requirements to our expert consultants. We will work with you to find a cost-effective solution.

Manufacturer: INOTEC Type: 175 for engines 75 D , 90 D Lug ring long continuous groove for Mikrocutter INOTEC 175 - NEW Product Code : V500663-1 / 175-0020019 Position 21 of the drawing Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36

Qty. 3 Second-hand winders Mfc.: Maxson Built: 1997 Roll width: max. 1,700 mm, min. 450 mm Maximum roll diameter: 1,650 mm The width of the core is: 70, 76, 120, 152, 300 mm

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment: via trapezoidal thread -Adjustment range: 120 - 175 mm -Price: for all 2 pieces -Weight: 4 kg

Condition: New (traces of storage available) Part Number: 8256016 Serial Number: 19293766 Type: 1724 Suitable for: Mitsubishi S12R

Gear motor, electric motor -Speed: 104 rpm -Power: 0.37 KW-S4-50% -Frequency: 50 Hz -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Price: per piece -Number: 9x available -Dimensions: 530/205/H200 mm -Weight: 22 kg

Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, Height 500 mm (top edge of rollers) Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) angle: 90° Construction year: 2003 nominal voltage: 380-500V Conveying length in mm: 1397, 1750 Nominal / outsid ...

Gear motor, electric motor, electric gear motor -Speed: 26.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 385/210/H215 mm -Weight: 18.3 kg

Gear motor, electric motor, electric gear motor -Speed: 6 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 675/260/H245 mm -Weight: 47 kg

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Hydraulic vise, machine vise, hydraulic vise, high-pressure clamp, hydraulic vise -hydraulic tension defective -sold as a source of spare parts -Jaw width: 160 mm -Jaw height: 53 mm -Span: max. 170 mm -Support height: 80 mm -Weight: 62 kg

Gear motor, electric motor, electric gear motor -Speed: 315 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m Machine completely overhauled with 12 months warranty Mechanically and optically like new Photo from Kellenberger brochure Fanuc 21i control -Grinding head UR 1-2-3 external/internal/plan -Axis automatic 1° Hirth serration -Active longitudinal positioning KEL-POS Movomatic -Semi-automatic balancing device KEL-BALANCE -Grinding wheel equipment left 400mm diameter -Grinding wheel equipment right 300mm diameter -Internal grinding unit with belt drive -Tailstock with micro-adjustment -fine adjustment upper table -Paper belt filter SBP4 240l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 175 mm -Width: 20 mm -Price: per piece -Number: 1x available -Weight: 1.1 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 28 mm -Outer: Ø 175 mm -Width: 6 mm -Price: per piece -Number: 2x available -Weight: 0.3 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 175 mm -Width: 20 mm -Price: per piece -Number: 1x available -Minimum purchase: complete -Weight: 1.0 kg

LWB Steinl Injection Machine Type VREFE 1600/1000/170 Heating platen size 500 X 510 X 63 mm Sliding platens Top and bottom ejectors Clamping force 1600kN Opening force clamp 100kN Clamping stroke 395mm Injection volume E 1000 ccm Max. Injection Pressure E 2200 bar Injection volume EF 170 ccm Max. Injection Pressure EF 1800 bar Hours: 700 since new Year 2009 Weight 6000kg

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inside: Ø 32 mm -Outside: Ø 175 mm -Width: 32mm -Quantity: 1 piece available -Weight: 1.4kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 175 mm -Width: 25 mm -Price: per piece -Number: 1x available -Weight: 1.2 kg

Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2005/1500/80 mm -Table height: 800 mm -Plate: solid -Holes: 50 x 50 mm -Cast plate -Vice -Dimensions: 2100/1700/H1030 mm -Weight: approx. 2000 kg

Gear motor electric motor -Speed: 56 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Brake: 220 V -Weight: 27 kg

engine diesel engine Cummins F3.8 - Stage 5 power approx. 114 kW / 154 HP shafts with 9/9 discs with 6 knives per disc (reconditioned) track system with track protection pads hopper with vibro chute Permanent-Over Belt Magnet remote control weight approx. 11 t

geared motor, electric motor -Speed: 120 rpm -Power: 3.0 kW -Design: B3 angle -Shaft diameter: Ø 35 mm -Protection class: IP 54 -Quantity: 1 piece available -Dimensions: 730/260/H240 mm -Weight: 63 kg

gear motor, electric motor, electric gear motor -Speed: 29.5 rpm -Power: 0.075 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

DC motor, servo motor, gear motor, electric motor, direct current, gear motor -Speed: 40 rpm -Power: 0.19 kW -Construction: angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 310/150/H160 mm -Weight: 10 kg

width of the strips: 200 mm band length: 1600 mm tube diameter: 38 - 170 mm connected load frequency: 400 V total power requirement: 3,0 kW weight of the machine ca.: 0,25 t dimensions of the machine ca.: 1,4 x 0,8 x 1,35 m Pipe grinding machine with 11 sanding rollers: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170mm Pipe clamping area 170mm Documentation (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Brake -Dimensions: 540/220/H230 mm -Weight: 22 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Number: 1x prism -Price: complete -Dimensions: 200/171/H92 mm -Weight: 12 kg

Chuck flange, flange mount, lathe chuck flange, driver flange -Chuck flange: for three-jaw chuck, four-jaw chuck, face plate -External: O 270 x 110 mm -Inside: O 240 x 81 mm -Mount: Camlock short taper 8 (139 mm) -Bolt circle: O 171 mm -Number: 1x disks available -Price per piece -Weight: 16.6 kg

Machine vice, stable vice, drill press vice -Vice: rotatable -Jaw width: 200 x 55 mm -Clamping depth: max. 170 mm -Dimensions: 600/270/H210mm -Weight: 81 kg

Chiller Make: SYSTEMAIR Type: SYSCROLL 170 AIR EVO PH Power: 170 kW – cooling and heating Electrical. Power: 77 kW/150A Refrigerant: R410A Weight: 1,385 kg Year of Make: 2014 4 pcs compressor Make: Copeland Scroll Type: ZP182KCE-TFD-455 Volume: 35.1 m³/h Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Plug, plug connection -Plug pre-assembled with cable -Type: 17113 -Number: 1,100x plugs available -Price: per piece -Please inquire about quantity discounts -Weight: 0.2 kg

Sensor actuator distributor, distributor strip, interface, sensor actuator distributor, sensor actuator -Manufacturer: Weidmuller, sensor-actuator-distributor ovp -Type: SAI-8-M 5P M12 170125 -Dimensions box: 175/65/H50 mm -Weight: 0.3 kg

Bezel traveling, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, bezel from lathe type MV SKV/2-1 -Bezel: driving -Max. Passage: Ø 170 mm -Center height: 230 mm -technical drawing: with the photos -Dimensions: 520/405/H510 mm -Weight: 33kg

Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter condition: Ausstellungsstück Antrieb: SEW Getriebemotor Electric data: 380-400 Bauhöhe in mm (BH): 300 KW: 2,2 Belt width in mm (GuB): 800 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1670 Frame width in mm (N ...

1700 : EL 400 30 pcs. DM 50 Steel axle M8 i 1100 : EL 470 100 pcs. DM 50 Steel axle 10mm Price per piece / as good as new

Kannegiesser belt conveyor Belt conveyor GF 1750-880-800 RA1306 Technical data: Conveying length (NL): 1750 mm Framework width (NB): ca 880 mm belt width (GuB): 800 mm Height/band run (BH): 420 mm +/- 100 mm Number of support feet: 2 pieces Load (kg/m): 75 kg Conveying speed: kontact us Electrical data: 400 V / 50 Hz / 0,75 kW Year of construction: 01/2018 Not the right one for you? On our website you will find more articles or simply contact us. All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 1750 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: inklusive Frequenzumrichter, including supports without side guides For individual, professional advice, simply get in touch with us ...