boge sd 60 used for sale

Cat. No. 09-1590-1 New Standard: - with residual outlet with inclined seat disc valve DN 50 - with cylindrical conical bottom at the bottom and top - Test pressure: 1.5 bar - permissible operating pressure: 0.49 bar - Material V2A AISI 304 - Surface inside and outside IIIC - With mannhole DN 400 with 6 screws, overpressure valve - Threaded connection connector DN 25 and with inclined disc valve DN 25 Cat. No. Content: Diameter: Ges.Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg On request with (please ask prices): Fermentation spandconnection DN 50 CIP Cleaning Fermented spundar fitting Trial tap For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight c ...

Cat.-Nr. 09-1590-1 new Standard Features: - with outlet with inclined seat valve DN 50 - cylindrical conical head top and bottom - test pressure: 1,5 bar - max. allowable operating pressure: 0,49 bar - material AISI 304 - surface inside and outside IIIC - with manhole DN 400 with 6 srews, over pressure relief valve, thread connection DN 25, with inclinded seat valve DN Cat.-Nr. Capacity: Diameter: Total Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg Surcharges/Unit: Fermentation Lock DN 50 CIP Cleaning System Fermentation Valve Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 09-1049-1 in very good condition Standard: Material: V2A (AISI 304) 1.4301 with cooling jacket only 300 mm high with input 1" AG with manhole top m.6 screws DN 50 and DN 25 with outlet DN 50 - output 1 1/4 AG with conical underbody Pressure resistant 1.5 bar Diameter: 115 cm Height: 125 cm Weight: 106 kg Supplement (please ask for price): Fermentation spandconnection DN 50 Fermented spundar fitting Trial tap CIP Cleaning Blind cap DN 50 Diving shaft/temperature sleeve The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat.-Nr. 13-0176 in a very good condition material: V2A � AISI 304 (1.4301) � surface: outside and inside 2B=IIIC Manufacturer: com. Binder GmbH Upper bottom: - flat conical lid with with CIP-cleaning and connection DN 65 - manhole oval 435 mm x 310 mm with clamping bracket and screw plug - CIP-connector DN 50 - Ventilation connector 200 mm - 1 flanged connector DN 50 - 2 eye hooks Tank body: - thread connector on the side above DN 50 - thread connector on the side above DN 50, 40 cm depth - with overflow pipe inside DN 100 up to the top of the tank bottom - fill pipe installed inside to tank center DN 100 welded from top to bottom - ladder hook 500 mm Lower bottom: central conical bottom outlet pipe DN 50 on 4 stable trumpet feet with calotte height adjustable DxH: 1.720 x 3.700 mm weight: appr. 800 kg All prices are valid Ex-Works, excl.V ...

Cat. No. 11-3600-5 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 600 litres Height on the ground: 1835 mm Height on the top: 1200 mm Total height: 3035 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-7 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 600 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 600 litres on the top: 500 litres Height on the ground: 1485 mm Height on the top: 1050 mm Total height: 2535 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 13-0217B-03 in very good condition measurement and weight: 2 plates in stainless steel 60 x 60 HxLxW: 134 x 220 x 97 cm 37 plates in pvc 60 x 60 weight: appr. 850 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

P94 - used approx. 6.6 m³ / 6,600 litres polypropylene tank, PP-tank, standing upright, roofless, open storage tank with flat bottom, in good condition. technical details: capacity: approx. 6.6 m³ / 6,600 litres material: PP-tank, polypropylene tank dimensions: Ø approx. 1.90 m x height = approx. 2.50 m Used storage container in good condition. Vertically standing tank with a flat bottom, 2 large flanges, as pictured without a roof and open top. The flanges can be changed or shut upon request. This container can be used as a storage tank for liquid feed, water, whey and many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already be ...

Pump station VR 0632 B consisting of: 2 pieces rotary vane vacuum pump circulating Manufacturer: Busch Type: R5 RA 302 D Transferables: Mineraloil Delivery time: ex-stock; ready for use

Pump station VR 0632 B includes: 2 piece rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 302 D Beriebsmittel: Mineral oil Delivery time: In stock; ready for operation

Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050

Transport Tapes Fabr. Bertram Model ZLS 4 Type 40/600 Y.O.M. 1996 Length 600 cm Width 40 cm with electric drive motor

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 60,000 litres Diameter: approx. 2,500 mm Length: approx. 12,680 mm Weight: approx. 10,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Included in delivery: 01x C-Profile, used Material color: sendzimir galvanized Total length: approx. 5,605 mm Profile abbreviation: C 200 x 80 x 35 mm Material thickness: approx. 2.00 mm Hole diameter: approx. 13 mm Weight / pcs approx. 38,75 Kg Note: - Since these are used goods, damage, Holes, welds, etc. rust deposits may be present. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shel ...

1,500 m² Nedcon mezzanine Column grid 800 cm x 600 cm! Used goods, top condition, as good as new, see pictures Height of the upper edge of the stage 370 cm Load 500 kg/m² Flooring different finishes available. Cargo lifts, stairs, railings and accessories sufficiently available CAD planning and assembly possible Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-c ...

Transformer - Voltage transformer 5,000 Volt --> 690 Volt 1,600kVA Manufacturer Siemens Type TRA1600 Power 1,600kVA Primaer 3x5000V 185A Secondary 3x690V 1.339A Hz 50 Insulating-Kl. F-F Cooling type ON Weight 4.050kg Special price

Ajan PP 260A 2000 mm x 6000 mm pla 260 Amper Pipe cutting preparation Machine is in good working condition

Press form Box 600400280 (meat) Wear 10-15% along the lines of closure there is a small flash

Press mould Box 600400200 (vegetable), wear 70%, part of the perforation and the closure line is filled with material.

Sheet filters 600x600 / 250 - Seitz Orion More then 300 machines new and second hand on our seema .de

A rotating frequency generator generates 60Hz alternating current from 50Hz alternating current. In good condition. The device can be converted into a diesel generator. Manufacturer: YAMADA DENKI CO LTD Type: RFC-3543E; Series: 80155 Power: 350 kVA Input: 415 V; 50 Hertz Output: 415/215 V; 60 Hertz Operating hours: 3624 h Electric motor: AM-355 W; 350 kW; 415 volts; 546A; 50 hertz; 1500 rpm Synchronous generator: M3834; 400 kVA; 415/210 volts; 60 hertz; 1400 rpm

RAKO Euro container blue 600x400x325 and 600x400x170 (lengthxwidthxheight) Over 10000 pieces per variety directly available. Simply pass on the required quantity, graduated prices possible! Very good and clean condition. Shipping per full pallet (32/56 pieces) possible, possible for an extra charge. Price net per container, plus VAT Cf9uhnejcv Minimum order 600x400x325 = 32 pieces! and 600x400x170= 56 pieces.

P332 - used approx. 81.6 m³ / 81,600 ltr PE100 tank, plastic tank, flat bottom tank, single-walled. technical details: capacity: approx. 81.6 m³ / 81,600 litres material: PE100 tank, plastic tank manufacturer: Weber Kunststofftechnik year of construction: 2016 dimensions: approx. Ø 4.00 m × approx. H 7.00 m specific weight: at least 1.0 kg/ltr Used PE100 tank, professionally cleaned and in great condition, almost as new, some are completely unused. Single-walled, above-ground storage tank, standing on flat floor. Lid on top of the roof and on the tank wall, several inlets and outlets, impervious to light. Former water tank, suitable for many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been ...

Batch intensive mixer with a maximum batch capacity of 1,250 l. / 3,600 kg, equipped with: Drum drive 22.0 kW (drum speed: 8.4 rpm), mixing star drives 2 x 22.0 kW (mixing star speed: 39 rpm), hydraulics power pack for discharge gate 3.0 kW, lubrication pumps 2 x 0.18 kW. Previous use: Production of ready-mixed concrete.

We offer: used collision protection sticks, approx. 600 mm 35 piece(s) in stock 21698 Harsefeld. Per piece € 21.00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

Grinding spindle GMN TSAV 40 s x 208 - 6002 ( TSAV40sx208-6002 ) n max: 13000 rpm diameter: Ø 40 mm sleeve length: 208 mm tool holder / drive: Ø 11 / 13 mm, length: 15 mm ( cone 1 : 7,, 5 ) thread: M10 x 1.0, length: 10 mm, left-hand thread flange: 85 x 56 x 8.5 mm, bore: Ø 22 mm used, tested ! Dimensions ( spindle ): 261 x 85 x 56 mm Dimensions ( packaging ): 365 x 85 x 125 mm

Shock Absorber, Shock Absorber ACE CONTROLS MC 600 EUM ( MC600EUM ) MC600M stroke: 25,4 mm rod diameter: Ø 8.0 mm, length: 30.5 mm thread: M25 x 1.5 thread length: 100 mm with nut, width across flats: 30 mm with hexagon socket, width across flats: 10 mm New ! Dimensions ( without nut ): 141 x 25 x 25 mm

Servo motor, electric motor, DC motor -Max. Speed: 6000/49 rpm -Power: 0.52 kW -Torque motor: 1.15 Nm -Shaft: Ø 25 mm -Construction: B5 -Gearbox manufacturer: SEW Eurodrive -Type: RF27 AQH80/2 -Translation: 1:28.37 -Dimensions: 410/140/H140 mm -Weight: 8 kg

Gas spring HAHN G10 23 250 1 600 AU19 AB11 600N 12/05 hole diameter: 8 mm Dimensions: 620 x 23 mm

Small dust extractor, dust extraction system ESTA OM-10 air flow: max. 600 m3/h vacuum: max. 1500 Pa motor: 0.55 kW 2740 rpm 220 - 240 / 380 - 420 V used, tested ! Dimensions: 650 x 600 x 1060 mm

Small dust extractor, dust extraction system ESTA OM-10 Air output: max. 600 m3/h vacuum: max. 1500 Pa Engine: AEG Type AM71NX2 0,0,55 kW 2750 rpm 220 / 380 V 3AC used, tested ! Dimensions: 750 x 620 x 980 mm

Hydraulic power unit ORSTA B.604.263 Discharge pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

Circuit breaker EAW MSM 600/16 - 0.16 - 0.25 A ( MSM60016016025A ) 0.16 - 0.25 A 500 V used, tested ! Dimensions: 100 x 60 x 80 mm

Circuit breaker EAW MSM 600/16 - 0.25 - 0.4 A ( MSM6001602504A ) 0.25 - 0.4 A 500 V used, tested ! Dimensions: 100 x 60 x 80 mm

Circuit breaker EAW MSM 600/16 - 0.4 - 0.6 A ( MSM600160406A ) 0.4 - 0.6 A 500 V used, tested ! Dimensions: 100 x 60 x 80 mm

Circuit breaker EAW MSM 600/16 - 0.6 - 1.0 A ( MSM600160610A ) 0.6 - 1.0 A 500 V used, tested ! Dimensions: 100 x 60 x 80 mm

Circuit breaker EAW MSM 600/16 - 1.6 - 2.5 A ( MSM600161625A ) 1.6 - 2.5 A 500 V used, tested ! Dimensions: 100 x 60 x 80 mm

Push rod tensioner, push rod tensioner set DE-STA-CO Model 607 607 - M stroke: 41 mm push rod tensioner set consists of 2 push rod tensioners ! New ! Dimensions: 160 x 110 x 85 mm

Circuit breaker EAW MSM 600/16 - 2.5 - 4.0 A ( MSM600162540A ) 2.5 - 4.0 A 500 V used, tested ! Dimensions: 100 x 60 x 80 mm

Circuit breaker EAW MSM 600/16 - 4.0 - 6.3 A ( MSM600164063A ) 4.0 - 6.3 A 500 V used, tested ! Dimensions: 100 x 60 x 80 mm

Electronic module, control card ZEISS 608481-9003-702 608481-0303 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, control card ZEISS 608481-9228 608481-2802 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Current meter with current transformer and rotary iron instrument PHOENIX CONTACT, KWK, GOSSEN Measuring range: 0 - 600 A AC ( 0-600AAC ) Current transformer: KWK S 40 b Primary current: 600 A Secondary current: 5 A 50 / 60 Hz Turning iron instrument: GOSSEN 600 / 5 A Conductor rail and terminals: PHOENIX CONTACT Type UHV 240 used ! Dimensions: 400 x 100 x 140 mm

Electronic module, control card ZEISS 608481-9320 608481-2004 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, control card ZEISS 608481-9031 608481-3103 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, control card ZEISS 608481-9003-701 608481-0303 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic Module, PC Board Module ZEISS 608481-9146 608481-4602 Spare part for 3D coordinate measuring machine ! used ! Dimensions: 180 x 100 x 25 mm

Electronic module, control card ZEISS 608481-9003-703 608481-0303 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, servo controller, power supply ZEISS 608483-9009-0901 spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 265 x 235 x 70 mm