boge sd 60 used for sale

Compressor Boge, CL 4– used - : Ex-location prices (net): 2.950.-€ (net) Manufacturer: Boge Type: CL 4 Year of Make: 2005 approx. 4,000 operating hours Compressed air tank: Manufacturer: BWB H-Nr 540226 Volume: 90L PS 11 bar T.max: 80 degrees T.min: -10 degree K-SK 3400 Ph 16.5 bar Condition: good Available: immediately Location: Waltrop

Description Drum feeder Bograma TA 15 from 2007

With the help of our rental machines, you can bridge the time periods during which there is an increased demand for compressed air. This is useful, for example, in the event of unexpected peaks in demand or the failure of one of your own compressors. The usual high BOGE quality standards also apply to our used rental machines – in addition to various compressors, a wide range of high-performance compressed air components is available for you. Before renting, all machines are carefully reworked and tested – we give you a guarantee for this. Visit the BOGE compressors Used Machinery Shop

New airend BOGE BA 30 as a replacement for Termomeccanoca SCA10D (TM SCA 10 D) The installation dimensions are the same. BOGE Id.Nr.: 201021766P ( incl. gasket DN 60x D110x 2 and O-Ring-90x3-N-FKM (Viton) 75)

New airend BOGE BA 15 as a replacement for Termomeccanoca SCA8D-R (TM SCA 8 D-R) The installation dimensions are the same. BOGE Id.Nr.: 201021166P ( incl. gasket 60 x 60 x 2 and O-Ring-76x3-N-FKM (Viton) 75)

2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -

VA-12. Compressed Air Systems (Air Reservoir) 2 complete systems, functional, Built: 1991 Manufacturer: Otto Boge GmbH & CO.KG Each unit contains: - 1 BOGE compressor tank - Diameter: 1.20m - Length: 2.20m - Mass: 1.5 t - Volume: 2000 l - Pressure: 16 bar Each unit includes: - 1 compressor, Type K-TROCHL-KOMPR - Manufacturer: Kompressor HD Technik GmbH Mülheim/Ruhr - 1 motor Technical Data: - Intake capacity: 5-50 m³/h - Intake pressure: 1.03-1.35 bar - Temperature range: 5-30 °C - Motor type: SCHORCH K 3200 L - Model: B 1014-2, 24 kW, 400V Find more here - / Contact us at -

Manufacturer: Boge Kompressor einheit mit Trockner und Behälter, Type: S 20-2, Year: ca.2014, Control: Boge, Screw compressors: yes, Operating hours: 8850, Running idle houres: 2500, Volume flow m³/min: 2,24, Final sealing pressure bar 1: 10, Power input kW: 15, Compressed air boiler litres: 1000, Required space L x W x H mm: 15, FREE TEXT: inkl.Drucklufttrockner und 1000 Liter Kessel und Ölwasserabscheider und Feinstfilter, Year :ca.2014

General SKU397X1160 MakeBoge LocationBarneveld CEcheck TypeC 15-2-LFR-500 Pressure Pressure buildup10 Bar Main Features Capacity2.25 m3/Min Motor30 KW Pressure10 Bar Specified Features - Blower Blowercheck 2x air compressor Capacity0,52-2,25 m³/min Motor2x 15 kW, 380 V, 3004 rpm Information No.5146436 / 5147193 Year of construction2020 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace2x 2,20 x 0,95 m Total height2,00 m Weight1600 kg Extra Specifications With control unit (as is), 2x Funke heat exchangers, Boge water/oil separator, type CC 10-2, 2x filter unitsBlowersBogeBlowers > BlowersBrand > Boge What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

Bograma overpass UEB 550; good condition; Working width 550mm; picking up and transporting small-format die-cut products; Stripping of inner punches with clocked Bograma transfer unit UEB 550; good condition; working width 550mm; Picking up and transporting small-format die-cut products; Breaking out internal die-cuts with timed air blast; 5 x separation elements with air blast; Interface to downstream machines.

Compressor manufactured in 2018. This BOGE S 111-4 features an air flow rate of 17.10 m³/min and a final discharge pressure of 10 bar. It is equipped with a refrigerated dryer model DS220, manufactured in 2017. If you are looking to get high-quality compressed air capabilities, consider the BOGE S 111-4 compressor we have for sale. Contact us for further details.

compressor Boge/Germany, 2013 type SLF101, 10 bar, 12.33 m3/min., 77.2 kW, with inverter, general overhauls in 2019, with new screw, only 3,000 running hours

Description mobile transfer BOGRAMA UEB 550 A with clocked blowing air and breakout station

Screw compressor Boge 400 V 11 KW 1.45 m3/min 10 bar Accessories : belts, filters, small parts The compressor goes to fault after switching on:

Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO. Upon request single parts can be offered. Detailed photos can be provided. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete plant Bogli 1600 round timber feed saw wagon roller conveyor shearer

standard cooler, car cooler, oil cooler, heat exchanger -Manufacturer: AKG, light metal oil/air cooler from screw compressor Boge VLED 30R-11A -Type: 0720.067.000 -Pressure: max. 15 bar -Dimensions: 650/360/H550 mm -Weight: 40 kg

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Boge, compressor control from screw compressor type VLED 30R-11A -Individual components: see photos -Dimensions: 200/110/H150 mm -Weight: 1.2 kg

Manufacturer: Boge , Type: S 90, Year: 1997, Control: yes, Screw compressor: yes, Operating hours: ca.35000, Wechselschaltung : möglich, Driving power kW 1: 65, Volume flow m³/min 1: 9,65, Available: Ende 2023, Year :1997

Manufacturer: Boge, Type: S 150, Year: 2004, Volume flow m³/min: 14,20-18,95, Operating hours: 24098, Running idle houres: 1190, Final compressed pressure bar: 7,5-13, Drive power kW: 110, FREE TEXT: Lüftermotor 4, Year :2004

Manufacturer: Boge, Type: S 90, Year: 1997, Control: yes, Screw compressor: yes, Operating hours: ca.38000, Running idle houres: 12000, Wechselschaltung : möglich, Driving power kW 1: 65, Volume flow m³/min 1: 9,65, Final compressed pressure bar: 10, Available: Ende 2023, Year :1997

Manufacturer: Boge, Type: VLEA 7,5 R-7, Year: 1990, Schraubenkompressor: yes, Operating hours: 4899, Running idle houres: 1434, Revolutions of main rotor U/min: 4480, Drive power kW: 7,5, Volume flow rate m³/h: 1,05, Max. Betriebsdruck : 8, Year :1990

Manufacturer: Boge, Type: Flex 37-12, Volume flow m³/min: 5,1, Operating hours: 43060, Running idle houres: 2224, Final compressed pressure bar: 10, Revolutions of main rotor U/min: 5205, Drive power kW: 37, Volume flow rate m³/h: 5,1,

Manufacturer: Boge, Type: D 63, Control: Elektrisch, Volume flow m³/min: 375, Drive power kW: 0,96, Kühlluftbedarf m³/h: 1300, Compressed air min/max bar: 2-16,

power capacity: ? kW feed pressure: ? bar liter capacity: ? l weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,211,5 m Nr. 4324 Screw compressor BOGE S20 Currently not ready for operation - Cause unclear / unchecked Presumably fault on circuit board Transport dimensions approx. 1200 x 1000 Weight approx. 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 bar Effective free air delivery: 700 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 397 kg. total power requirement: 5.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 bar Effective free air delivery: 1.950 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 467 kg. total power requirement: 15.0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 bar Effective free air delivery: 1.000 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 410 kg. total power requirement: 7.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 9.450 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressed Air Adsorption Dryer, Activated Carbon Adsorber with Secondary Filter BOGE Type DAZ 5-2For Particularly Dry AirFabr. No. 38315449 year of construction 2013Volume flow max. 250 litres/min. = 15 m³/hOperating pressure max. 16 barConnection thread G 1/4? Mains connection 230 volts, 50 Hz- pre- and post-olderSpace requirements L x W x H 400 x 210 x 580 mmWeight 15 kgGood condition; used

Boge DS2-DS30 Diesel-oil (1) -- Naphte (2) -- Electr (3): Elektr Max output: 10 bar voltage: 3 x 400V Volume flow rate: 0,50–0,54 m³/min Power imput: 4 kW Length: 480 mm Width: 907 mm Height: 955 mm Weight: 200 kg

Manufacturer: BOGRAMA Model: BSM 750 / 220 / 15 Year of Manufacture : 2005 Type of Machine : Cut and Punch Machine Find more here - / Contact us at -

Brand: Boge Type: C3LR Kind: Screw compressor, air-cooled Max. final pressure: 10 bar Chassis number: 5063340 Year of construction: 2013 Capacity: 0.24 m3/min. = 8.3 CFM Engine speed: 1,500/ min. Drive power: 2.2 kW (3 hp) Pressure vessel: 90 liter Voltage: 400V / 50Hz (3-phase) L x W x H: 1185 x 550 x 1010 Noise level: 61 dB (A) Weight: Approx. 130 kg Residual oil content: < 3 mg/m³ Connection: G ½” (ball valve) Cooling air volume: 600 m³/h Ambient temperature range: +5 to +40 °C Photos/film available: Photos available 10.2.195

Two identical compressors with integrated refrigerated dryer are offered. Pressure dew point: +3°C, rated power: 30kW, delivery rate (FAD): 5.31m³/min at 8bar, 4.77m³/min at 10bar, 3.86m³/min at 13bar, control: Boge Autotronic, fully automatic operation. Inspection is possible by arrangement.

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Compressed air tank, pressure container, pressure tank, compressed air boiler, pressure vessel, compressor tank, pressure accumulator for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, pressure accumulator with filter block from compressor type SL 270 -Pressure accumulator: Type 306022 V 230 L -Final pressure: max. 15 bar -Hole circle: Ø 240 x 22 mm -Filter units: see photos of individual components -Dimensions: 1600/980/H1270 mm -Weight: 289kg

Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Boge, fan from compressor type SL 270 -Fan: Ø 420 mm -Engine: Type FC80/2 -Power: 1.1 kW / 2815 rpm -Hole circle: Ø 295 x 22 mm -Total dimensions: Ø 495 x 315 mm -Weight: 13 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Boge, intake filter from compressor type SL 270 -Type: 569.0007.11 -Intake filter cartridge: 569.0007.31 -Maintenance indicator: 569000503 -Dimensions: 530/440/H850 mm -Weight: 28 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

Specifications Brand: Boge Type: C3LR Kind: Screw compressor, air-cooled Max. final pressure: 10 bar Chassis number: 5063340 Year of construction: 2013 Capacity: 0.24 m³/min. = 8.3 CFM Engine speed: 1,500/ min. Drive power: 2.2 kW (3 hp) Pressure vessel: 90 liter Voltage: 400V / 50Hz (3-phase) L x W x H: 1185 x 550 x 1010 Sound level: 61 dB (A) Weight: Approx. 130 kg Residual oil content: < 3 mg/m³ Connection: G ½” (ball valve) Cooling air volume: 600 m³/h Ambient temperature range: +5 to +40 °C Photos/video available: Photos available 10.2.195

dimensions – Height (soundproofed) [mm] 930 – Height (supersonic insulated) [mm] 2120 – Width (acoustic/supersound-insulated) [mm] 1200 – Depth (acoustic/supersound-insulated) [mm] 980 weight – soundproofed [kg] 315 – supersound-insulated [kg] 365 Highest sound pressure level [± 3 dB(A)] according to DIN 45635, part 13 86/79 – schallg. / supersound-insulated [dB(A)] Measuring area measure 15/15 schallg. / supersound-insulated [dB(A)] Formwork power level 101/94 – schallg. / supersound-insulated [dB(A)] compressor compression final temperature [°C] 110 Volume flow to PN 2 CPTC 2 at: – pmax = 8 bar [m3/min] 3.35 – pmax = 10 bar [m3/min] 2.85 – pmax = 13 bar [m3/min] 2.45 Motor Rated power [kW] 22 rated speed – 50 Hz [min-1] 3000 – 60 Hz [min-1] 3600 Protection class IP 55 Design IMB 3 ISO Class F Electrical connectio ...

Good working conditions

Screw compressor C9 Flow rate 1.1 m3/min 10 bar 7.5KW Hours 9000 Schematic E-Parts Compressor is unchecked.

More details upon request

cutting and punching machine

Width 68 cm Year of construction 2006 Lifting Punching Machine Computer control with monitor Touch screen Price on request. We deliver and install worldwide!

NH fuse -NH 2 -100 A 500 VAC Price: complete Quantity: 7 pieces -Weight: 4.2 kg

Conveyor width 800 mm Overall width 930 mm Width with control unit 1070 mm Working height adjustable from 720 mm to 950 mm Use: Conveying empty bags for filling, labeling or printing Marking or labeling of paper or plastic material Operating hours unknown