131,224 used machines on RESALE, but how to find them? Machine Search
mobile heating system, central heating system, steam heating used STEAG / LOOS Boiler capacity: steam 3.2 t/h Boiler manufacturer: LOOS Boiler type: UHD 3200 Temp. max 190°C Pressure max 13 bar Boiler capacity 2650 l Burner WALKER D112/140-2 7.0 kW Heat and soundproofed container 9.2 x 3.6 x 3.6 m Transport weight: approx. 25t Operating weight approx. 30 t Electrical power requirement 25 kW Changes and errors in the technical data, information and prices as well as prior sale reserved.
Blasting container for blasting glass beads, ceramic balls, grnat sand, hard cast gravel with conveying floor, abrasive preparation, blasting device, filter system. Internal dimensions L=5850 B= 2300. Side Door Open for easy loading with the forklift
Blasthouse components as a kit for self-assembly or by assembly by our specialist personnel. Flat conveying floor, transverse screw conveyor, bucket elevator, wind screening, sieve, abrasive bunker, blasting device, filter system, blow-in system, suction wall and electrical control.
Blasting house with extraction floor for mineral abrasives (glass, ceramics, corundum, garnet sand and so on). Magnetic separator, cyclone, preparation, material bunker, abrasive refill, free jet pressure blower, filter system with cleaning. Lining of the walls with 4mm fabric rubber
The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer
USED STAINLESS STEEL 40.000 LITRES TANK REF.: C9070 Horizontal tank made of stainless steel by AGUILAR Y SALAS with a capacity of 40,000 liters. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel Year built 1987 Weight 4060 kg Design pressure atm Design temperature 35 ºC Test pressure lleno de agua Technical characteristics: Capacity 40.000 l Bottom type Klopper Vessel outside diameter 2800 mm Vessel height 5500 mm
IWM Sanitiser tunnel Model: SAN100E Serial: 1281-S1E 2014, Stainless, suitable for sanitising produce in buckets, bags, tins and trays, max size 450mm W x 450mm H, recirculation tank, mobile, 3Ph
RITTAL SK 3365.662 Wall-Mounted Cooling Unit – Blue e Series High-performance wall-mounted enclosure cooling unit designed to provide reliable temperature control for electrical cabinets and control panels in industrial environments. The RITTAL SK 3365.662 from the Blue e Series offers efficient cooling performance and energy-optimized operation for temperature-sensitive electronics. General Information - Manufacturer: RITTAL - Model: SK 3365.662 - Series: Blue e - Machine Type: Wall-mounted cooling unit Technical Specifications - Cooling Capacity: 1,500 W - Voltage Supply: 230 V AC / 50–60 Hz - Protection Class: IP54 (internal and external circuits) - Refrigerant: R134a Dimensions and Weight - Dimensions (W × H × D): 435 × 1,090 × 260 mm - Weight: approx. 45 kg - Condensate Management - System: Electrical condensate evaporation Key Features - Energy-e ...
Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 35,950 mm Number of fields / row of shelves: 09 pcs á 3,900 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 10x Pallet rack stand, used Material colour: Ral 5015 blue Profile dimensions: 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 3,300 mm high 1,100 mm deep 36x Pallet rack crossbar, used Material colour: Ral 2004 orange Box profile: 140 x 50 mm Truss Type: PNB0444 Agraffe: 4 HK (hooks) Clear width: 3,900 mm Max. load per pair of trusses 2,300 kg with the same weight. Distributed load 72x Safety pin, used Material colour: sendzimir galvanised For securing the longitudin ...
Meurer high speed wrapper type: CM/HEM 60 Grouping and shrinking of beverage packages. Fully automatically grouped, wrapped and shrunk in PE shrink film. the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format .
Name: CNC control unit / control unit Name: HURCO CNC Control Unit Manufacturer: HURCO Companies, Inc. (USA) Serial Number: U4M01003112D Type: Control Unit / Control Kit Dimensions (estimated): approx. 440 × 360 × 160 mm Weight: approx. 15 kg Country: USA Short Description: HURCO control unit with several plug-in cards, including RAM and interface boards as well as connections for COM, I/O and other interfaces. The device is designed for industrial use in CNC milling machines or machining centers. The rugged aluminum chassis features two active fans for internal cooling, as well as numerous I/O ports (Sub-D and Centronics). There are several signal connectors on the front and back, as well as internal expansion slots for additional modules.
- 62cm bandwidth - with digital control - Stainless steel scaffolding - can be driven on castors with locking plate
Clean room pass box. 2-doors Pallet air Shower UV. Pass boxes Air Shower UV is aimed at dust removal and disinfection processes using ultraviolet light (UV) without wastes. Thanks to the fans in the unit and the induction nozzles, dust is removed and collected in the equipment’s filters.
used spiral kneader Kemper SPL 100 with stainless steel boiler and stainless steel tool in good condition immediately available for sale. The machine can be driven on rollers with locking device and with a replica flour rod cover including safety switch. Trade-in and delivery on request. -Stainless steel boiler -Stainless steel spiral -2 x Timers Automatic -2 x speeds slow and fast -with flour dust cover -for 100 kg flour or 160 kg dough -more pictures and information on request -Shipping and trade-in on request -Machine can be inspected and tested in our warehouse
X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)
Compressive force: 170 t Spindle Ø: 160 mm Table support surface: 700 x 900 mm Plunger area: 500 x 800 mm Gr. Distance between table and plunger: 450 mm Drive motor: 380 V, 11 kW Weight: 8200 kg
used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW
SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 μm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample Types: Supports SBS standard plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes, and microscope slides Throughput: Can expose up to 250 plates per day Automation: Fully automated with options for integration into robot systems Voltage (U): 100 – 240 V AC 50/60 Hz Power (P): 295 VA max Created: 01/2011 More items - new and used - can be found in our shop! International shipping costs on request!
SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 2600 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-104-30CE Truss length: 2700 mm Load capacity: 2600 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...
SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 1500 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-084-30CE Truss length: 2700 mm Load capacity: 1500 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...
Technical data for the light raverse: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: 01x Longitudinal bandage, used Designation: BL 3 Overall length: 1,310 mm Profile dimensions: L 42 x 44 mm Material colour: sendzimir galvanised Note: for use in PR 600 & WR 600 shelf stands in Connection with R3000 shelves Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Technical data for the pallet pull-out: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet pull-out, used for shelf depth: 800 mm Material color: blue Total depth: approx. 810 mm Total width: approx. 1,295 mm Height: approx. 265 mm Extension: 100 % = 740 mm Weight|pcs.: approx. 100 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,480 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Pallet rack stand, used Material colour: sendzimir galvanised Frame Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 2,100 mm high 800 mm deep 06x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,295 x 790 x 40 mm Weight | Pcs.: approx. 12.82 kg 04x Light traverse, used Designation: BL 3 Overall length: 1,310 mm Profile dimensions: L 42 x 44 mm Material colour: sendzimir galvanised 20x Freestanding partition walls, used Total depth: 765 mm Total height: 315 mm Usable height: 275 mm Material th ...
Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!
SPECULAS BISCUIT LINE - INCLUDING PACKING MACHINE , DISPENSER , BISCUIT LINE, OPEN , MULTIHEAD PACKING MACHINE
Spine heating plate Schmedt PräPara; good condition; cleaned and tested; Max. Book height 640mm; Max. Block thickness 110mm; Adjustable inclination. Book cover heating plate Schmedt PräPara; good condition; cleaned and chekced; max.book hight 640mm; max.block thikness 110mm; adjustable in tilt.
SCANVAEGT GRADER ID.NO. 2150 Scanvaegt grader station with input belt and 8 distribution stations year of year 2006 previously used in the bird industry. Dimensions 750 x 135 cm H 160 cm. Bandwidth 28 cm.
Control Panel Display Miwe FP 12 SST for Aero Ovens -Control panel display for Miwe in-store ovens -for Miwe Aero, Miwe Econo, etc.
Optical sorting machine with material feed (via 2 stainless steel infeed hoppers and 2 electronically controlled vibratory chutes), material chute (made of specially coated aluminium), optical unit (4 high-resolution monochrome cameras with 2,048 pixels each; integrated image processing with a resolution of 0.09 mm) and blow-out system (144 high-speed blow-out nozzles with 1,400 cycles per second). The machine can be used, for example, to remove particles of different colours or foreign bodies from a material stream. Throughput: 500 to 800 kg/h (for quartz sand 0.1 - 6.0 mm). IP6X protection class for dustproof operation; incl. connection for external dust removal. Dimensions: 1.4 m wide x 1.8 m deep x 1.90 m high.
STROJARNE PIESOK NTC 2500/4 guillotine shears were built in 1985 in Czechoslovakia. The machine, distinguished by its extremely sturdy design, is used for cutting sheet metal with a maximum thickness of 4 mm. The machining process is performed by high-quality cutting blades with an electrically adjustable gap between the blades. The NTC 2500/4 guillotine shears weighs approximately 3800 kg. Technical specifications of the STROJARNE PIESOK NTC 2500/4 guillotine shears - maximum sheet metal thickness (Rm=450 MPa): 4 mm - minimum sheet metal thickness: 0.6 mm - maximum sheet metal length: 2500 mm - cutting angle: 1°33′ - reach: 200 mm - back stop stroke: 4-750 mm - back stop drive: electric - back stop motor power: 0,25 kW - main motor power: 4 kW - installed power: 6.5 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3100 x 1600 x 1500 mm - weight of the mac ...
Force 6- 45 kN Working height 300-490 mm Projection 100-195 mm as good as new. Condition Accessories - Buttons Embossing Unit with Numbers Applications: for stamping, embossing, numbering, straightening, riveting, punching, etc. Function: By pressing down the hand lever after placing the tool on the workpiece, the special strike spring is tensioned and released. The impact impact is transferred to the workpiece and is infinitely adjustable. Advantages: Infinitely adjustable impact force High impact performance with little effort Tolerance compensation (for different workpiece heights, the same impact force is always achieved) Pneumatic drive can be retrofitted Universal spring impact presses
Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 40,680 mm Number of fields / row of shelves: 01 pcs. á 3,600 mm Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 05 pcs. Pallet spaces per row of racks: 60 pcs. Total pallet spaces: 60 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): n/a The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Frame Type: P73 Profile dimensions: 75 x 75 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 3,600 mm high 1,100 mm deep 20x Pallet rack t ...
Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scorin ...
Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...
Rubber balls as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 30mm Material: EPDM, NR/SBR, silicone, PUR, silicone (detectable), polyurtehane (detectable) Quantity: 1 pack (100pcs) possibly small quantities Price: On request (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)
Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)
Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)
Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly with minimum order quantity)
Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 996 7 1496 7 1996 Material: NBR/SBR 408 RED and NBR 60 HELL Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
Struts Tumble screening machine as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 25 by 6mm Material: NBR (FDA) Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
Hoses and clamps as wear material for your screening machines, vibrating screening machines, tumble screening machines: Hose: Size: Length 425mm Material: NR/NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
Struts / rubber spring tumble screening machine as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: Length 425mm Material: NR/NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
maximum number of results exceeded
please refine your search
