bobst sp used for sale

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Plexiglass enc ...

Dimensions (L/W/H): 2394x990x3115 mm Weight: 0 kg Total power requirement: 2,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6300x2000x2350 mm Weight: 1250 kg Total power requirement: 32,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2020x920x1160 mm Weight: 750 kg Total power requirement: 3,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x750x1250 mm Weight: 600 kg Total power requirement: 3 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2020x920x1160 mm Weight: 680 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1624x950x2345 mm Weight: 0 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2920x980x1450 mm Weight: 1500 kg Total power requirement: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1200 mm turning diameter over slide rest: . mm turning length: 5000 mm digital readout: Digitalanzeige centre height: 600 mm : 55 PS spindle turning speed range: 5-1000 U/min Rapid movement: längs 4000 mm/min accessories:: Futter, Planscheibe accessories:: Stahlhalter, Lynetten Weight without Lynette: zwischen Spitzen 8000 kg Weight with Lynette: zwischen Spitzen 11500 kg Rapid movement: quer 2000 mm/min total power requirement: kW weight of the machine ca.: ca. 20 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling ...

Very good surface grinding machine Table surface / working area 200 x 600 mm

gebr. Table milling machine ALDINGER Type: S 15 Year: 1959 Engine power: 4 / 5 hp (2.94 / 3.7 kW) Doubling the speed via selector switch Left/right rotation via selector switch 6 Speeds: 2,800 / 3,500 / 4,500 / 5,600 / 7,000 / 9,000 rpm Height adjustment by handwheel Extraction connection: 120 mm Table size: 95 x 105 cm Table height: 85 cm 525 kg Unoverhauled - ACTUAL state from carpentry dissolution FIXED PRICE

- Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

In Stockroom at the warehouse in Blomberg! The KR BM 600 is a profile spraying machine of the latest Kama generation. The machine is equipped with a wide cabin, a conveyor belt transport system with paint recovery and belt washer system. Automatic loading and unloading systems are available as an option. SPRAY ARMS, PART DETECTION 4 spray arms, adjustable in height, inclination and angle, are installed as standard. adjustable in height, inclination and angle. On these arms the 4 spraying can be used. By means of part recognition at the inlet of the spraying machine the individual spray guns are controlled. Optionally, additional guns and pumps can be installed or a version with a double booth can be selected. CONVEYOR AND BELT CLEANING SYSTEM WITH PAINT RECOVERY SYSTEM The paint that is sprayed onto the 600mm wide polyolefin conveyor belt is automatically squeegeed off and can be reus ...

With 1 piece HD pump Bings Marple 8/25 up to 175bar and 4 pieces airless spray guns Krautzberger KAA1300. Machine equipped with change-over valve for quick color change, lever switchable to max. 3 color circles and 1 rinsing agent pump (options). In Ex-version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bi ...

CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...

- Producer Cattinair - Type ROTO - G - Year of construction 1998 - Working width 1300 mm - Working height ~ 880 - 910 mm - Operating side, left - Steel belt transport system - Gun control system - Number of installed spraying guns 8 Stk. - Number of lacquer pumps 0 Stk. - Location, not on stock

Hemburg U2.H Motorpower: 950 W Tension needed: 3 x 380 V

TECHNICAL DATA: Spindle: Ø 35 mm Spindle tilt: 0° - 45° Manual spindle height adjustment Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 hp EQUIPMENT: 1 3-roller drive (Maggi Steff 2034)

Router R8, large table, ready for demonstration from the site.

Spiral mixer Diosna SP 160 AD/T revised and repainted immediately available in stock for sale. - Extendable spiral mixer with 2 stainless steel boilers - Manufacturer: Diosna Dierks & Söhne GmbH - Type: SP160AD - for a maximum of 160kg of dough or for a maximum of 100kg of flour - With 2 timers, automatic for slow and fast gear - Automatic switching on and off via clocks - With flour dust cover - 2 speeds (gears), slow and fast - Boiler locking via pliers operated with hydraulics - with 2 stainless steel vats - Suitable for almost all doughs - Robust and strong - Tub capacity 260 liters

Cup Ø: - mm depth: - mm NUMBER OF TURNS: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8867 Type: - Producer: Surfin Generated: Parameters: Inner width: 1250 mm Inner depth: 1250 mm Interior height: 2100 mm Equipment: 3x filter cartridge

-Kettle vat for Kemper ECO125AE spiral mixer -Shell diameter approx. 92cm -Kettle interior height: 52.5cm

Item condition: in working order Availability: immediately Connected loads: 400 V, 50 Hz Dimensions (LxWxH): 1250 x 780 x 1350 mm Machine weight: approx. 580 kg

Item condition: in working order Availability: immediately Connected loads: 400 V, 50 Hz Dimensions: 1250 x 780 x 1350 mm Machine weight: approx. 580 kg

Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...

Key data: 600 mm, 400 mm, 350 mm

For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...

For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.

Spiral mixer DIOSNA, type: SP 24 -Very good condition- - Kneader suitable for up to 24 kg dough - With timer - 2 speeds - Rideable - Condition: Very good, ready to use Inspection and test run are of course possible by arrangement.

The used Kemper ST75A spiral mixer with 2 stainless steel boilers each is immediately available in our warehouse in Bielefeld. - Type: ST75A - a machine with 2 boilers - for max. 75 kg flour or for max. 120 kg dough - With 2 automatic timers - Shell diameter 76.5 cm - Boiler capacity: 175 litres - Boiler drive via friction wheel - Boiler can be manually locked - Extendable - With 2 timer relays automatically - 2 speed settings: fast and slow - Flour dust cover - Stainless steel spiral and tool - Boiler also made of stainless steel - Machine is anchored to the ground with 2 screws - Machine head moves up or down when the boiler is retracted and retracted - 400 volt power connection - Robust and stable machine - Machine completely repainted - All wear parts renewed More information and pictures, as well as shipping costs and trade-in on request. We are constantly ...

Used spiral mixer DIOSNA, type: SP 40 -in bakery condition- - 2 speeds - 1 time clock - Boiler and spiral made of stainless steel - Good condition, technically tested and cleaned - Kettle volume: for max. 40 kg dough - El. Connection: 280 V, 50 Hz, 6.5 A

Table extensions  Table length 240 cm  Swivel range -10+45 Max. spindle protrusion 175 mm Motor 7.5 kw Weight 950 kg Compressed air 6 bar

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120 kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Dough mixer With paddle Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 50kg of flour Voltage: 400V / 50Hz

Spiral dough mixer 120 kg dough Diosna Power in flour: 75 kg Bowl contents: 180 liter Digital control keyboard with program memory Cover with safety switch Castors with brakes Voltage: 400V / 50Hz / 3 N/PE Electric power: 6.5kW

Dough mixer With paddle Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 180 liters / 120 kg of dough or 75 kg of flour

Spiral dough mixer Capacity: 100 kg of flour 160/180 kg of dough Diosna Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes

Dough mixer Manufacturer: Diosna With paddle Stainless steel bowl Volume: 80 liters Dimensions: 75x70x100cm Electric power: 2.5kW Voltage: 380V 50Hz

Dough mixer Manufacturer: Diosna With paddle Stainless steel bowl Volume: 180 liters Dimensions: 90x95x135cm Electric power: 3.5kW Voltage: 380V 50Hz

Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.

Spare Parts for Printers and Thermoformers Consisting of :- GABLER 702/703 Complete Control Cabinet ILLIG VHW 72 Infeed Adjustment VAN DAM Vane Vacuum Pump Norgren Plugassist Cylinder Skeletal Waste Material Winder 20 x ILLIG RDM 70K Mold Parts for 68mm PP Cups 1 x Plastic Crate Polytype DDM 300 Spare Parts 2 x VAN DAM Goose Neck Cup Feeder, 1 x Inclined Conveyor Cup Feeder 8 x Plate Cylinder Assembley Polytype BDM 301R

A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554.  ...

max. wheel diameter: 500 mm gear width: 200-400 mm module: 12 turning speeds: 0-3250 U/min bracke pressure: bis max. 95 Nm inner taper: Konus #39 Control: Fanuc 16 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 740 mm turning length: 6000 mm spindle bore: 110 mm turning speeds: 16-1600 U/min digital readout: faceplate: mm 3-jaw chuck: steady: total power requirement: 22 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Year of manufacture 1999 Control: Siemens 840D Turning length (mm) 6000 Max. turning diameter (mm) 1100 Max. turning diameter over slide (mm) 740 Spindle diameter (mm) 105 Speed 16 - 1800 (18x) kW 22 Voltage 380V Hz 50 3-jaw chuck ø (mm) ¦ 4-jaw chuck ø (mm) ¦ Fixed steady rest ø (mm) 2x Through-spindle cooling ¦ Multifix tool post The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space,  ...

turning diameter over bed: 630 mm turning diameter over slide rest: . mm turning length: 3150 mm hollow: mm Number:: 16304188/ turning diameter: mm weight: 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SINMAG KM25 Spiral kneading machine used Year of manufacture 2014 from plant closure two speeds, three gears (first gear reversible as mixed gear) Kettle, spiral and dough crusher made of stainless steel not tinkered with Machine in very good condition Machine can be controlled digitally and optionally also operated analogue via the side switch Three clocks for mixing and both kneading speeds Boiler with clockwise and counterclockwise rotation Machine must be thoroughly cleaned before use Video about test run available

Milling printer machine TECNOMAX mod. ROUTER F - Year 2006

High speed vertical milling machine CAMAM mod. FV/1T-1P - Volt. 380/50 - CE rules - Year 1998