bobst sp used for sale

Name: FANUC OM Series Servo Motor Manufacturer: FANUC (Japan) Type: M 472128 L × W × H: ~ 325 × 170 × 140 mm Weight: ~ 12.10 kg

max. wheel diameter: 275 mm max. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mm spiral angle: min. 0 / max. 60 ° max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/min blade head turning speeds: 20 - 110 U/min total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Name: Compressed Air Maintenance Unit Manufacturer: SMC Type: AMR4100-04 (MIST SEP/REG) Country: Japan Short Description: Combined compressed air maintenance unit (regulator + oil/water separator) with integrated pressure gauge (M.R. Unit). 0.3 μm filtration, manual emptying, pressure range approx. 0.5–8.5 bar. Typical for CNC machines (e.g. MAZAK H500/40). Robustly built, with BSP thread in 1/2.

Name: Hydraulic Power Unit with Electric Motor and Oil Tank Manufacturer: HYDAC (engine by Elprom S.R.L.) Type: 80C4 3030923 Short Description: Compact hydraulic power unit consisting of an electric motor from Elprom (type 80C4), mounted on a HYDAC oil tank with integrated hydraulic block. Suitable for hydraulic applications in machine tools or industrial plants. Power: 1.1-1.3 kW at 230/400 V, 50 Hz. IP54 rating.

Name: Automatic lubrication device Manufacturer: VOGEL Type: 122 135 314 Flow rate: 0.1 l/min Max. pressure: 8 bar Voltage: 100 V / 50/60 Hz Tank capacity: 1.8 l Country: Germany Short Description: Electric central lubrication pump from VOGEL for industrial applications. Compact device with transparent 1.8-litre reservoir for checking the oil level (mark MIN/MAX) and integrated control unit. Ideal for machines or production plants with a central lubrication system. Suitable for oils with high purity. Used condition, technically perfect.

Name: Automatic Lubrication Unit AMO-II-1503 Manufacturer: LUBE Corporation, Japan Specifications: Model No.: AMO-II-1503 Voltage: AC 100 V Output Power: 20W Current consumption: 0.63/0.64 A Frequency: 50/60 Hz Phase: Single-phase, 2-pole Delivery pressure: 20 kg/cm² Flow rate: 150 cc/min (at 50 Hz), 180 cc/min (at 60 Hz) Tank capacity: approx. 1.8–2 litres Weight: approx. 4.08 kg Dimensions: 275 × 140 × 260 mm Origin: Removed from MAZAK H500/40 Serial Number: 610326

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM9/3000, A06B-0163-B010#0001 Country: Japan Short description: FANUC model αM9/3000 compact AC servo motor with a rated power of 1.8 kW, 3000 rpm, voltage 161 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM6/3000, A06B-0162-B110#0001 Country: Japan Short description: FANUC model αM6/3000 compact AC servo motor with a nominal power of 1.4 kW, 3000 rpm, voltage 144 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear. Price excludes VAT.

Name: Water Filter Manufacturer: Unknown Type: Unknown Rod diameter: approx. 52 mm Insert height: approx. 140 mm (dimensions: approx. 360×250×140 mm) Weight: approx. 2.43 kg Country: Unknown Short Description: Industrial water filter with blue plastic housing and black plastic inlet and outlet ports. Equipped with a metal bracket for easy wall or machine mounting. Robust design for filtration of cooling water or process water in technical systems. Used condition with visible signs of wear. Price without VAT

Name: Water Filter Manufacturer: Unknown Type: Unknown Rod diameter: approx. 30 mm Insert height: approx. 140 mm (dimensions 360×190×140 mm) Country: Unknown Short description: Robust plastic water filter with integrated wall bracket and ball valve. Blue finned housing for better heat dissipation. Suitable for industrial applications or water treatment systems. Used, with visible signs of use, but in working order Price: Price without VAT

Name: AC Servo Motor Manufacturer: Siemens (Germany) Type: 1FT6082-1AF71-1AH1 Dimensions: approx. 350×210×160 mm Weight: approx. 16.5 kg Technical specifications: 3-phase servo motor with a maximum speed of 7900 rpm and a rated speed of 3000 rpm, torque 13 Nm, peak torque 16.3 Nm, encoder 2048 pulses, IP65 protection class, integrated brake 24VDC – 20.6W. Condition: Used, in good optical condition, with visible signs of use, comes from STAMA MC 325/S Price without VAT

11 litre, Stock number: R1108, Drum mixer, stainless steel., Spicer., Standing on stainless foot, tablemodel., Stainless drum with cover in end bottom., Timer function., Litre: 11, Material: Stainless steel AISI 304

50 litre, Stock number: R1152, Drum mixer, stainless steel,, SPICER type 50., Standing in stainless cabinet on wheels., Stainless drum with cover in the bottom end., Safety shielding., Timer function., Litre: 50, Material: Stainless steel AISI 304

Stock number: D803, Flow split, stainless steel,, Ø 2., 12 connections., Material: Stainless steel AISI 304

Stock number: D540, Lab. spray tester

Stock number: D527, Spray dryer nozzle head, stainless steel., Pasch Silkeborg TCR P2052 - 1984., Material: Stainless steel AISI 304

Stock number: D526, Spray dryer nozzle head, stainless steel., Pasch Silkeborg TCR P2052 - 1972., Material: Stainless steel AISI 304

circuit board, Sunnen ML3500 - ML5000 - ML2000, model PED 2202, in working condition, Contact us for info

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Chevalier FSG-618M Worklength with magnetic table: 457 mm Grindingwidth: 152 mm Dimensions of the table: 460 x 150 mm Distance between table -- spindlecentre: 450 mm Max dia grindingstone: Ø 205 × 12.7 × Ø31.75 mm Spindlespeeds: 2850 rpm Motorpower: 1,5 kW Length: 1900 mm Depth: 1400 mm Height: 2130 mm Weight: 674 kg

Manufacturer: Siemens Model No.: 1FT6044-1AF71-3AH1 Condition: used Removed from: STAMA MC 325/S Dimensions: 410×150×120mm Weight: 13.72kg Connections: with encoder and brake, without K-bus Price: plus VAT

pressure capacity max.: 80 t Stroke: 500 mm table surface area: 960 x 810 mm spindle pitch: 72 daylight between the columns: 950 / 540 mm passage: 640 mm machine weight ab.: 4500 kg dimensions of the machine ca.: 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Name:Siemens Simatic S7-300 Manufacturer:Siemens Type:6ES7 361-3CA00-0AA0 Insert height:Dimensions 130×80×120 mm Country:Germany Short description:Connection module IM361 for decentralized peripherals with K-Bus design S7-300 used dismantled by STAMA MC 325/S fully functional Price without VAT

Siemens 6SN1111-0AA00-0BA0 Throttle STAMA MC 325/S Type: 6SN1111-0AA00-0BA0 Manufacturer: Siemens Dimensions: 330×150×150 mm Weight: 8.6 kg Condition: used Price: on request (plus VAT) Origin: from STAMA MC 325/S disassembly

From a current recycling we offer you 3 x 3 modular machines/systems that are used to process spokes of impellers. The French. Manufacturer MACH 1 is a leading manufacturer in this segment. The pictures show a "line". We have 3 of them each. Year of construction 2022 Condition: good Original price: 355.000,00 € net Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

Siemens 1FT6062-1AF71-3AH1 servo motor made of STAMA MC 325/S Manufacturer: Siemens Model No.: 1FT6062-1AF71-3AH1 Type: Brushless Servo Motor Condition: used Origin: STAMA MC 325/S Dimensions: 360×150×120 mm Weight: 10.28 kg Power: 5.5 kW Voltage: 270 V Current: 13.5 A Encoder: Optical, 2048 S/R Brake: Holding brake EBD 24 V, 7 W Cooling: natural convection Max. speed: 3700 rpm Connection: 2 connectors Scope of delivery: as pictured Price: plus VAT

Manufacturer:Siemens Model:1FT6062-6AF71-3AB2 Dimensions:330×150×120mm Weight:9.93kg Voltage:282V Current:3.4A Torque:Rated Torque4.7Nm:Maxtorque6.0Nm Rated Speed:3000rpm Max Speed:9100rpm Degree of Protection: IP67 Encoder:I-2048 Brake:24VDC:17.0W Origin:STAMAMC325/S Price: plus VAT

Length: , mm Width: , mm Height: , mm Door painting trolley --------------- TLW 120: Price EUR 695.00 Painting trolley for doors incl. 2 pick-up forks - Door weight up to 120 kg - Door size max.2400x1200 mm Technical data Dimensions (min.) L x H x W 1330 mm x 910 mm x 610 mm Dimensions (max.) L x H x W 2600 mm x 910 mm x 610 mm Load capacity up to 120 kg Weight 24 kg --------------- TLW 200: Price EUR 985.00 Painting trolley for doors - Door weight up to 200 kg - Door size max.2800x1400 mm Technical data Dimensions (min.) L x H x W 1460 mm x 970 mm x 1100 mm Dimensions (max.) L x H x W 3360 mm x 970 mm x 1100 mm Load capacity up to 200 kg Weight 42 kg Extension set for TLW 200: Price EUR 190.00 for maximum door lengths up to 3600 mm --------------- Prices of the above-mentioned painting trolleys on request! plus packaging and shipping --------------- Further technical details as an attac ...

Mains filter Schaffner FN351-80-34 from STAMA MC325/S Type:Mains Filter Manufacturer:Schaffner Model No.:FN351-80-34 Used in:STAMA MC325/S Short Description:3-phase mains filter for industrial applications, compact design, 80 A rated current, screw connections. Good used condition, fully functional. Price excl. VAT

Safety Relay Elan SRB-NA-ST99-24VDC STAMA MC 325/S Manufacturer: Elan Type: SRB-NA-ST99-24VDC Condition: used Dimensions: 90×85×125 mm Weight: 0.57 kg Origin: STAMA MC 325/S Price: (plus VAT)

A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible.

Safety Relay Elan SRB-NA-ST99-24V STAMA MC325/S Manufacturer: Elan Type: SRB-NA-ST99-24V Condition: used Dimensions: 90×85×125mm Weight: 0.57kg Removed from: STAMA MC325/S Price: (plus VAT)

Position Switch Schmersal AZM 415-22zpk-M20 STAMA MC 325/S Manufacturer: Schmersal Type: AZM 415-22ZPK-M20 Voltage: 24 VAC/DC Current: 4 A Fmax: 3500 N Degree of protection: IP67 Condition: used Dimensions: 200×130×60 mm Weight: 1.42 kg Price: (net, plus VAT)

Junction box Siemens STAMA MC325/S Manufacturer: Siemens Type: Junction Box Dimensions: 120×80×60mm Weight: 0.38kg Condition: used, fully functional Price: (plus VAT) Origin: dismantled from STAMA MC325/S

Schmersal AZM 415-222ZPK-M20-024VAC/DC Manufacturer: Schmersal Type: AZM 415-222ZPK-M20-024VAC/DC Voltage: 24V AC/DC Dimensions: 240×150×60 mm Weight: 1.44 kg Condition: used Origin: STAMA MC 325/S Price: on request VAT: The price is quoted without VAT

SIEMENS 6FC5235-0AA05-0AA1 Condition: used, tested Removal from STAMA MC325/S With connection cable Manufacturer: Siemens Country of origin: Germany Weight: approx. 1.2 kg Dimensions: 180 × 120 × 40 mm Price plus VAT

Transformer Michael Riedel RNTU 72 S Manufacturer: Michael Riedel Transformatorenbau GmbH Model: RNTU 72 S Primary voltage (PRI): AC 400 V Secondary voltage (SEC): DC 24 V / 3 A Standard: IEC 38, DIN 19240, EN 60 742 Dimensions: approx. 130 × 80 × 90 mm Weight: 2.33 kg Condition: used, removed from STAMA MC 325/S Price plus VAT

CNC Spindle Manufacturer: STAMA Model: MC 325/S Item number: T600.011-374-3/e Condition: used Dimensions (L×W×H): 450×140×150 mm Weight: 18.54 kg Price: plus VAT

Transformer Michael Riedel RDRK 30/36 Manufacturer: Michael Riedel Transformatorenbau GmbH Type: RDRK 30/36 Primary voltage: 3 × 380/400/420 V Secondary voltage: – 24 V DC (30.0 / 36.0 A) – 15 V DC stabilized (1.5 A) Frequency: 50/60 Hz Power: 0.74 / 0.88 kW Insulation class: IP00, 100% ED Dimensions: approx. 130 × 210 × 200 mm Weight: 10 kg Condition: used, dismantled from STAMA MC 325/S Price: on request / plus VAT

Solenoid valve Festo JMFH-5/2-D-1-C STAMA MC325/S Type: Solenoid Valve Manufacturer: Festo Model No.: JMFH-5/2-D-1-C Pressure range: 2.1–10 bar Condition: Used Dismantled by: STAMA MC325/S Dimensions: 150×130×120 mm Weight: 0.95 kg Price: (plus VAT)

Spiralbindemaschine - Spiral binding machine FOELL 33

Antike Spindelpresse - Antique Spindel Press Krause 35286 Baujahr / Year ca. 1934 - Serial-No. 35286 Pressfläche / Press Size max. 400 x 500mm Wunderschön verarbeitete antike Spindelpresse  Beautifully crafted antique Spindel Press

A comprehensive package of spare parts from Tetra Pak is available. Machines: Tetra Pak packaging systems and related equipment. Spare parts: Sleeve for pipe connections, cone ID6xD6mm aluminum, cutting ring 6mm, spacers, spring 1.00x12.00x50.0mm 1. 4310, screw M5x12, sealing ring 8x14mm, O-ring 15x2mm, retaining ring DIN 471, valve spring, bearing 6001-2RS, plain bearing bush 10x12x15mm, hose connector 6mm, seal EPDM, connection nipple R1/8, guide bush 20mm, plastic sealing cap, insulating washer 22x3mm, clamping element and others. Documentation available.

Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern

power capacity: . kW tool adaptor: . total power requirement: . kW Milling head BFT Burzoi 0038 PUN 181-187 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: . kW tool adaptor: . total power requirement: . kW Milling head BFT Burzoi 0038 PUN 181-187 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 550 mm y-axis: 350 mm z-axis: 400 mm U-axis: 550 mm V-axis: 350 mm volume: 1200 L inclination: +/-30°/400 mm dimensions: 1200x700x400 mm weight: 1500 kg wire dia.: 0,10-0,33 mm Bobbin Weight max.: 25 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sensor Balluff BES 516-B4-PA STAMA MC 325/S Manufacturer: Balluff Model No.: BES516B4PA Type: Inductive Sensor Article number: 12-602-11 Voltage: 10-30 VDC Output: PNP Normally Open Connection: Cable Dimensions: 120×90×80 mm Weight: 0.84 kg Condition: used, functional Origin: Dismantled from STAMA MC325/S Price: plus VAT

Polyester fiber production line Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the "conjugated" type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. + In 2019 instaled, elevators and a screw conveyor for  ...