129,086 used machines on RESALE, but how to find them? Machine Search
new all stainless steel turn table diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) adjustable speed 0,12 kW
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)4,46 x 1,88 x 2,30 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ...
The scope of delivery includes: 01x Ceiling Mirror, II. Choice ( New) Outer diameter: 800 mm Total height: approx. 300 mm Material: Plastic Incl. fastening chain: approx. 5,000 mm Weight / piece: approx. 2.10 kg Note: This is a second choice product, new unused. II. Choice means there may be dust deposits, minimal scratches or soiling. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 850 mm -Machine weight approx. 3, 4to -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request
-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 1250 mm -Machine weight approx. 3, 9t -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request
GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mDrive power main spindle22/18,5 kWRapid feed X / Z30/30 m/minMovements X / Z260/795 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.2500 rpmBar diameter max.102 mmSpindle bore111 mmMax. Turning Length705 mmWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pLeft Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 adopts a h ...
UF 150070301 MD PVD sputtering machine was built in 2015 in China by LONGKOU BITE VACCUM TECHNOLOGY CO., LTD. This extremely high-tech machine is used in the vacuum coating process. The technological vacuum combined with the high voltage inside a chamber causes the expulsion of metal atoms from the target (evaporation material), which are then deposited on the surface of the workpieces. Workpieces treated in this way are characterised by a ″metallic effect″ with high resistance to abrasion and chemical agents. The offered LKBT magnetron sputtering machine has the necessary equipment, i.e. a high-vacuum diffusion pump, compressor and RITTAL chiller. It is also possible to purchase new titanium targets (20 pcs.), chrome targets (4-5 pcs.) and TiAl alloy targets (3-6 pcs.) for an additional charge. The price for a single piece is 1200 PLN. Technical specifications of the UF 150070 ...
Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg
Table milling machine DROMA Type FM-4 Machine No. 8301 Built in 1994 Motor power: 5 kW With engine brake Spindle left and right rotation Speeds 3000/4500/6000/9000 rpm Spindle diameter 30 mm Spindle clamping length 150 mm Extraction connection diameter 2x120 mm Milling fence with fine adjustment left and right Table size 1010 mm x 900 mm Front and rear table extensions Dimensions 1 piece 1200 mm x 750 mm, 1 piece 1000 mm x 720 mm Machine weight 700 kg Weight of the table extensions each approx. 20 kg Dimensions Machine 1500 mm x 1200 mm x H 1400 mm With table extensions, total length 3220 mm Loading dimensions 1 pallet 1500 mm x 1200 mm x H 1600 mm Weight approx. 710 kg 1 pallet 1200 mm x 800 mm x 1200 mm, weight approx. 60 kg
Technical data: Stand height: 2,000 mm Shelf depth: 600 mm Shelf length: 2,050 mm Usable area: 1,950 x 600 mm Shipping Weight: approx. 130 Kg Consisting of: 2x Shelf stand 2,000 x 600 mm / unassembled 6x Trusses 1,950 mm 6x Steel - Insert - 965 x 547 mm 4x Metal base Specialist load: 400 kg / at evenly distributed load Further attachment shelves of this variant are available for 184 € / piece incl. VAT ! These shelves are also available in other sizes. Let us create a free offer. Shipping possible on request.
Capacity: 56 l/min Motor: 1,5 kW Working pressure: 6 bar - Input with threaded supports DN 40, DN 50 - Output with threaded supports DN 50 - With friction geared motor for stepless speed control - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1700 mm Width: 550 mm Height: 1030 mm Weight: kg
gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...
Year: 1979 Capacity: 25 l /min Motor: 0,75 kW Working pressure: 13 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - With friction geared motor for stepless speed control - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1400 mm Width: 410 mm Height: 1020 mm Weight: kg
Year: 1979 Capacity: 20 l /min Motor: 0,75 kW Working pressure: 19 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - With friction geared motor for stepless speed control - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1400 mm Width: 410 mm Height: 1020 mm Weight: kg
-Engine power 7, 5kW -30to cutting force Cutting channel designed for -maximum roll length 1500 mm -maximum roll diameter 1200 mm -Machine weight approx. 3000 kg -Tank capacity ca. 100Liter -Hand guards in the area of the control panel and to present -Splitting er table straight version Documentation 2 German (1 x writing, 1 x CD) Being body RAL 7035 light grey Guards/blade RAL 1028 melon yellow Ibkah3p Machine in production / available from 04-2019 Price and further details on request
Name: CNC control unit / control unit Name: HURCO CNC Control Unit Manufacturer: HURCO Companies, Inc. (USA) Serial Number: U4M01003112D Type: Control Unit / Control Kit Dimensions (estimated): approx. 440 × 360 × 160 mm Weight: approx. 15 kg Country: USA Short Description: HURCO control unit with several plug-in cards, including RAM and interface boards as well as connections for COM, I/O and other interfaces. The device is designed for industrial use in CNC milling machines or machining centers. The rugged aluminum chassis features two active fans for internal cooling, as well as numerous I/O ports (Sub-D and Centronics). There are several signal connectors on the front and back, as well as internal expansion slots for additional modules.
Name: Automatic lubrication device Manufacturer: Willy Vogel Type: 122 049 304 Dimensions: approx. 310×210×240 mm Weight: approx. 3.8 kg Voltage: 110/220 V, 50/60 Hz Capacity: Flow rate 0.1 l/min at 15 bar Fuel tank capacity: 2.7 liters Country: Germany Short description: Compact automatic automatic lubrication system from Willy Vogel with robust plastic tank and integrated control system. Designed for industrial use, it allows for precise lubrication at a constant pressure. Transparent housing for fill level control, multiple cable connection, wall bracket available. Used condition with external signs of wear, technically functional. Price is quoted without VAT.
To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails
GALACTIC GAVA 500 CAPVD PVD sputtering machine was built in 2022 in Poland. This extremely technically advanced system is designed to coat, among others, cutting tools, moulds and punches with super-durable coatings with high resistance to abrasion and chemical agents. The CAPVD (Cathodic Arc Physical Vapour Deposition) method used, compared to standard PVD methods, allows highly dense and adherent coatings to be produced with good deposition rates and thicknesses (± 5 nm). In the process, atoms from a source (cathode) placed in the working chamber are vaporised using an electric arc. These atoms then transfer and deposit onto the surface of the workpieces, creating a thin coating. The GAVA 500 PVD sputtering machine is equipped with all the necessary components of the best technical specifications and meets the highest industry standards. Technical specifications of the GALACTIC ...
Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.
Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...
Force 6- 45 kN Working height 300-490 mm Projection 100-195 mm as good as new. Condition Accessories - Buttons Embossing Unit with Numbers Applications: for stamping, embossing, numbering, straightening, riveting, punching, etc. Function: By pressing down the hand lever after placing the tool on the workpiece, the special strike spring is tensioned and released. The impact impact is transferred to the workpiece and is infinitely adjustable. Advantages: Infinitely adjustable impact force High impact performance with little effort Tolerance compensation (for different workpiece heights, the same impact force is always achieved) Pneumatic drive can be retrofitted Universal spring impact presses
8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves
MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (industrial version) Mobile spot cooler Coolmobile 25 for selective cooling of e.g. material, cooling tunnels, room areas and heat sources. The Spotcooler is mobile via wheels and can be easily driven to the place to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be switched on and off automatically via a timer. The device can be used anywhere via a Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged via a flange and warm air hose (both not included). Specifications: Cooling capacity / kw 7.32 (25,000 Btu) Air flow m/h 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter aluminum and carbon Max. static pressure / mm 3 ...
Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)
BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800
PLUNGE EDM MACHINE AEG 443 B C AXIS X-AXIS STROKE: 1000 MM Y-AXIS STROKE: 600 MM Z-AXIS STROKE: 500 MM
BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900
Top condition, completely serviced and checked, built in 2018 incl. 2 backing pumps, IonMax source, HESI sample, PC and SW. THERMO Q-Exactive HF-X High Field Orbitrap High-resolution mass spectrometer for the analysis of proteins, peptides, lipids, glycans and small molecules. The Q Exactive RF system combines a segmented quadrupole for high-performance precursor ion selection with an ultra-high-field Orbitrap mass analyzer with high resolution and accurate mass determination (HR/AM) for an optimal combination of scanning speed, resolution, mass accuracy, spectral quality, and sensitivity. I Identify, quantify and confirm components in a single analysis with the Q-Exactive HFX mass spectrometer.
PLUNGE EDM MACHINE AEG ELBOMAT 333 P ALEXTA DISPLAYED X-AXIS STROKE: 414 MM Y-AXIS STROKE: 292 MM Z-AXIS STROKE: 360 MM
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmWorking areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmClamping chuck diameter max.315 mmMax. Turning Length800 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ...
GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg
PLUNGE EDM MACHINE AEG ELBOMAT 402 M DISPLAYED GHIBLI X-AXIS STROKE: 290 MM Y-AXIS STROKE: 160 MM Z-AXIS STROKE: 150 MM TABLE: 550 X 400 MM MAX HEIGHT PIECES: 300 MM MAX SIZE PIECES: 750-545 MM
Eccentric spiral pump NETZSCH NE80A 15-20 to/h used - in very good condition! UNI-ALTD Capacity: approx. 15-20 t/h Year: 1984 Type: NE80A Flange: 1 x DN 120 1 x DN 150 Comment: the pump is tested, 100% functions guarantee! Measurements: Length: 2030 mm Width: 600 mm Height: 1300 mm
PLUNGE EDM MACHINE AEG ELBOMAT 944 X-AXIS STROKE: 818 MM Y-AXIS STROKE: 326 MM Z-AXIS STROKE: 305 MM
Indramat RAC 3.1-150-460-A0I-Z1-220 Spindle Drive Drive Controller For sale is an Indramat / Bosch Rexroth RAC 3.1-150-460-A0I-Z1-220 AC Main Spindle Drive Controller – used, but in good, functional condition Technical details: Supply voltage: 3 × AC 380–460 V Control voltage: AC 230 V Weight: approx. 49 kg Continuous current: approx. 92 A Max. output power approx. 55 kW Ambient temperature: +5 °C to +45 °C (operating), −30 °C to +85 °C (storage) Max. operating altitude: up to 1000 m above sea level Protection class: IP 10, humidity class "F" according to DIN 40 040 Integrated cooling via fan Integrated emergency stop system Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can ...
PLUNGE EDM MACHINE CDM ROVELLA MODEL: ZENIT P1 STROKE X: 1500 MM STROKE Y: 1000 MM STROKE Z: 500 MM C AXIS 10-POSITION TOOL CHANGER MAX ELECTRODE WEIGHT: 2,500 KG MAX. WORKPIECE WEIGHT: 12,000 KG SUPPORT SURFACE: 2000 X 1200 MM TUB SIZE: 3000 X 1500 X 1075 MM CONTROL: HEIDENHAIN MOD. 406
HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM
maximum number of results exceeded
please refine your search
