bobst sp used for sale

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_oxide ...

Used 4-basket autoclave WSA-8 by Spomasz. Year of manufacture 2012. Diameter 1100 mm, acid-resistant design. Diameter 1100 mm. Working pressure 0.4 MPa Calculation temperature 151°C Sterilization temperature max. 132°C Water consumption approx. 400 dm3/8h Steam consumption during the entire cycle approx. 400 kg/h Installed power 5.5 kW Length 480 mm, width 2400 mm, height 2200 mm, weight 2020 kg.

turning diameter: 20 mm turning length: 230 mm control: Fanuc 16iT total power requirement: 0,55 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2275 x 1300 x 1760 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: DMG Type: Sprint 42/10 Linear Year of Make: 2014 Technical data working space Max. travel X-axis: 50 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 120 mm Workpiece Max. workpiece diameter: 42 mm Max. workpiece length: 320 mm Max. bar passage: 42 mm Control: Fanuc Basic functions Sub-spindle Y-axis Accessories Bar Feeder Säneförderer Tool Holder Condition Perfect Availability Immediately after payment Terms and conditions of purchase: no guarantee, no warranty, no return Terms of delivery: Ex-works Terms of payment: 100% prepayment

The Verbufa skewer machine is the best solution for the production of (meat) skewers. A skewer is automatically inserted into the dosed meat. Products such as kofte, kebab, cevapcici and meat rolls can be produced easily, cleanly and quickly with this skewer machine. The Verbufa skewer machine is connected directly to the outlet of a Handtmann vacuum filling machine, so that the weight accuracy of the portions is very high. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration/Demo Machine

Top control panel Edge Feeder 1902 Glue application station 1906 Chopping shears 1902 Printed work 1816 Cross-cut unit 1918 Milling unit 1942M Rounding scraper blade 1929 Shape milling unit 1983 Wing scraper blade 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Length approx. 5300 mm

weight: . kg taper MK: . Clamping system The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used BT ANT / Stacker Trucks Overall good condition Year 2017 Battery about 70% Manufacturer: BT / Toyota Type SPE200D Type of electric stacker truck Drive type: Electric Load capacity 2,000 kg PYLON DATA Mast Type Duplex with Free Lift Lifting height 2,500 mm Overall height 1,785 mm Free stroke 1,350 mm Fork length 1,200 mm

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles -------------------------------------------- Machine is currently being checked! Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ------------------------------------------- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 13 ...

Key data: 2 mm, 810 mm, 700 mm

General Manufacturer: Spinner Type: MVC1600-B Year of Make: 2006 Switch-on hours: 30,240 h Control: Siemens 810D ShopMill Travels: X 1,600 mm Y 810 mm Z 700 mm Spindle Speed: 6,000 rpm Power: 25 kW Tool holder: SK50 Tool Changer Number of stations: 24-fold with double arm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Blow-out device for spindle High-pressure system IKZ 26 bar Preparation 4th axis Preparation of workpiece probes

Inv. Num. : 8135 Type: MCV 750 A speed Producer: MAS Created: 2020 Parameters: Control system: Heidenhain 640 Number of axes: 4 pieces Minimum vertical spindle speed: 12000 1/min X-axis travel: 750 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Number of all tools: 24 pieces Rapid traverse X/Y/Z: 40000/40000/40000 mm/min Total power: 50 kW Machine height: 2500 mm Machine length: 3400 mm Machine width: 3110 mm Machine weight: 5250 kg Equipment: Chuck TOS UIS 200/4-1-M2; TOS UIS 250/4-2-M1

Transport length: 2800 mm band width: 180 mm dayligth: 250 mm width: 300 mm 0: 1300 mm total power requirement: kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 4,6x0,5x1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transport length: 3400 mm band width: 600 mm dayligth: 600 mm width: 800 mm total power requirement: kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 4x0,8x0,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Foil wrapping line for mailings with - shrink tunnel Make Dekapacker Model SPK 4-35 Year 1999 basic description this line exists of 4 feeders, a bundle packer with side seal, a shrink tunnel, a U-turn belt and a delivery belt Dekapacker feeders Station 1 non/stop push feeder for i.a. books or other rigid materials Station 2+3+4 non stop rotary vacuum feeders for booklets, signatures, sheets, labels Dekapacker wrapper Model SPK 4-35 Width 90 - 350 mm Height up 120 mm Speed up to 40 cycles per minutes Sealing on 2 or 4 sides Dekapacker shrinking tunnel Width 500 mm Heigth 300 mm Belts Belt 1 U-turn belt Belt 2 Straight belt General information Foil details For PE and shrink foils, 20-60 micron. up to 600 mm Details waste material is winded up Video Click here Available direct

Wire stitcher Make Speckbötel Model GFM Year 1980´s ? Capacity up to 3 mm Details head can turn so can stitch both horizontally and vertically Available direct

Wire stitcher Make Speckbötel Model GFM Year 1980´s ? Capacity up to 3 mm Details head can turn so can stitch both horizontally and vertically Available direct

Gildemeister sprint 208 + IEMCA Boss 338 HD 2016 Gildemeister Sprint 20/8 CNC Lathe – High-Precision Turning Machine Looking for a high-performance CNC lathe for precision machining? This 2016 Gildemeister Sprint 20/8 is a versatile, reliable, and efficient turning machine that’s perfect for complex part manufacturing. --------------------------------------------------------------- Machine Details: - Manufacturer: Gildemeister (DMG Mori) - Model: Sprint 20/8 - Year of Manufacture: 2016 - Control System: Fanuc 32i-B CNC - Type: Sliding Headstock Automatic Lathe - Condition: Excellent (well-maintained and regularly serviced) --------------------------------------------------------------- Specifications: - Max Bar Diameter: 20 mm - Max Turning Length: 200 mm - Number of Axes: 8 - Main Spindle Speed: Up to 10,000 RPM - Sub-Spindle Speed: Up to 10,000 RPM - Tool Capacity: - 22 Too ...

GOMAD FG-2 TOP SPINDLE MILLING MACHINE – year 2016 SPINDLE ROTATION 6000 - 18000 RPM. VERTICAL TRAVEL OF SPINDLE 125 MM VERTICAL TRAVEL OF TABLE 150 MM DISTANCE OF SPINDLE AXIS FROM THE BODY 760 MM HEAD TURNING ANGLE +45° -45° TABLE DIMENSIONS 1180 X 700 MM ELECTRO-SPINDLE SOCKET ER 32 BUSHING RACK COLLET FOR BURRS 01 -020 ELECTRO-SPINDLE 5.6 KW REQUIRED AIR PRESSURE 0.6 MPA DIAMETER OF SAWDUST EXTRACTION NOZZLE 80 MM SAWDUST AIR VELOCITY 25 M/S COOK 750 KG Find more here - / Contact us at -

Essemtec SP600 SMT stencil printer Find more here - / Contact us at -

1. CNC Lathe - DMG MORI SPRINT 20/5 (Swiss Type): - Model: SPRINT 20/5 - Year of Manufacture: 2016 - Max Spindle Speed: 10,000 RPM - Max Bar Diameter: 25 mm - Max Torque: 100 Nm - Weight: 2,150 kg - Manufacturer: DMG MORI - Condition: Excellent, well-maintained machine. 2. Barfeeder - IEMCA SMART 320: - Model: SMART - Type: 32 LL - Year of Manufacture: 2016 - Max Pressure: 6 bar - Weight: 440 kg - Voltage: 200 V, 3-phase - Current: 5 A - Frequency: 50 Hz - Manufacturer: IEMCA - Condition: Fully operational and in excellent working condition. Find more here - / Contact us at -

- Type: Aqua Mammut ( Parts Washing System ) - System Type: Front Loader --------------------------------------------------------------- Specifications: - Empty Weight: 1,700 kg - Load Capacity: 700 kg - Dimensions (Closed): 2,150 x 2,700 x 1,850 mm (H x W x D) - Dimensions (Open): 2,150 x 2,700 x 2,950 mm (H x W x D) - Basket Size: 1,000 x 1,500 mm - Usable Height: 350 mm - Maximum Filling Quantity: 175 l - Performance: 2 x 7.5 kW (3 x 400 V/50 Hz) - Maximum Operating Temperature: 75°C Find more here - / Contact us at -

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

x-travel: 1250 mm mm y-travel: 1000 mm mm z-travel: 600 mm mm Control: total power requirement: 25 Kw kW weight of the machine ca.: t dimensions of the machine ca.: m Brand Tos Machine no F641 Type SPEEDtec CNC Brand Siemens CNC Type Sinumerik 840D Year of make 2009 X 1.250 mm Y 1.000 mm Z 600 mm Intake HSK 100 Engine power 25 kW Speed 12000 RPM Tool changer Number of pallets 4 Outgoing ram Including manuals Speed maximum 12.000 RPM Maximum pallet load 4.000 kg Chip transport Tool magazine positions: 2x 40 , HSK 100 4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used automatic dough batching machine type SPdc-1000. New 2001. Automatic dough batching set 3 head.

Manufacturer: Spielvogel Model 2700 Year Of Manufacture: 1990 Type of Machine: Block Stone Circular Saw Machine Details: Blade diameter approx. 270 cm, 380V, 50Hz Machine Powered: Yes Operating Hours: Approx. 30,000h Additional Accessories: Rotary table, automatic cutting sequence Find more here - / Contact us at -

Manufacturer: Chiron Model: FZ15 S High Speed Year of Manufacture: 2007 Operating Hours: 48,000 h Find more here - / Contact us at -

Refer to code 1080-1081-1082 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

cold feed extruder - 60 mm x 18 D vacuum, with feed roller, drive 22 KW, screw speed 10 to 60 rpm, with gear pump, 5 TCU,

cold feed vacuum extruder Troester 90 mm x 18 D, with feed roller, drive 46 kW, pie speed 10 to 60 rpm, 5 TCU,

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWAxial drilling unit for back work.oper.Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 sp ...

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmSpecial equipmentHinged belt chip conveyor with Discharge height 1200 mm Aut. bar feeder IEMCA BOSS 545/32 E, max_ L=3200 mm, incl. guide channel diam. 18 mm

Used Tetra Pak A3/Speed 200 ml Slim Filling Line High-performance aseptic carton filling line designed for packaging liquid food products in 200 ml Slim cartons. The line is built around the Tetra Pak A3/Speed filling machine, offering high production capacity and reliable operation for dairy and beverage manufacturers. Line Configuration - The filling line consists of the following equipment: - Used Filling Machine – Tetra Pak A3/Speed - Used Helix Accumulator – ACHX30 - Used Straw Applicator – SA30 - Used Cardboard Packer – CBP30 Tetra Pak Filling Machine General Information - Manufacturer: Tetra Pak - Model: A3/Speed - Year of Manufacture: 2012 - Package Format: Slim Technical Specifications - Capacity: 24,000 packs per hour - Package Volume: 200 ml - Working Hours: 16,146 h - Tetra Pak Helix Accumulator - Buffering system designed to ensure continuo ...

turning diameter: 400 mm turning length: 730 mm control: FANUC 21i rapid traverse: 15/24 mm/min spindle turning speed range: 4000 U/min spindle motor: 19 kW x-axis: 240 mm z-axis: 640 mm rapid travel (x and z-axis): 18 /24 m/min spindle bore: 66 mm tailstock quill taper MT: 5 tailstock quill stroke: 120 mm total power requirement: 50 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3 x 1,7 x 1,8 m - CNC control FANUC 21i-TB (with Manual Guide I) - hydraulic hollow clamping cylinder - 12-position tool turret, driven tools 4000 rpm, 2.8 kW - Tool monitoring - SMW Autoblok KNCS N225-65 chuck - C-axis (with disk brake for milling operation, Transmit software for end face machining and cylinder interpolation for shell machining) - B-axis - Tailstock (MK 5) - Chip conveyor - Coolant system with high-pressure pump - Parts catcher - Radial and axial milling heads Translated wi ...

turning diameter: 120 mm turning length: 380 mm control: Fanuc 18 iTB max. swing diameter: 300 mm : : 8000 min/-1 : 7,5 kW : 26 Nm spindle nose: 100 mm spindle passage: 32 mm A-Axis: : 8000 min/-1 : 5,5 kW : 23 Nm spindle nose: 100 mm spindle passage: 32 mm : : 12 pos. tool taper: VDI 16 Sub Spindle: x-axis: 400 mm z-axis: 400 mm feeds:: rapid traverse: 12 m/min total power requirement: 20 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 2 x 1,7 m 2022 New glass scale Heidenhain and replacement of smaller parts, new FANUC CNC Keyboard CNC - Ultra precision turning centre (X-, Z-, E-, C-Axe) - CNC control Fanuc 18iTB - Main and counter spindle - SAUTER tool turret 16-fold (0.5.480.510) VDI 16 - Linear tool slide - automatic doors - Chip tray - Coolant system with fine filter (high Pressure Pump) - 3 jaw chucks - Various clamping devices/pressure collets - Vari ...

SERV-SPEED GOVERNOR RS - 12404590

SERV-SPEED GOVERNOR RS - 12511709

SPEED GOVERNOR RS - 12470911

SPEED GOVERNOR RS - 12470916

Inv. Num. : 8226 Type: VC 810 Producer: Spinner Created: 2005 Parameters: Control system: Siemens Work table length: 1000 mm Work table width: 600 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 800 mm Y-axis travel: 600 mm Travel Z-axis: 510 mm Machine height: 2600 mm Machine length: 2400 mm Machine width: 2200 mm Machine weight: 6000 kg

Inv. Num. : 8228 Type: TC-42 Producer: Spinner Created: 2004 Parameters: Control system: Siemens Max. machining length: 500 mm Maximum turning diameter over bed: 400 mm Maximum main spindle power: 12 kW Maximum spindle speed: 4500 1/min Spindle bore: 42 mm Equipment: Powered tools

amount: 1 STK Jaw chuck - centric - clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8227 Type: U-620 Producer: Spinner Created: 2011 Parameters: Control system: Siemens Number of axles: 5 pieces X-axis travel: 620 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Maximum vertical spindle speed: 10000 1/min

amount: 18 STK - for workpiece clamping on lathes, grinding machines and dividing headswith high concentricity and holding force - for workpiece clamping (bar or chuck work) in conventional conventional single-spindle lathes and CNC lathes directly in the spindle the spindle or in the collet chuck - Smooth bores are mainly used in the counter spindle of CNC lathes - Price as a set = 18 pieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8229 Type: PD-CNC Producer: Spinner Created: 2007 Parameters: Control system: Siemens Max. turning diameter: 120 mm Maximum length of travel in the X-axis: 400 mm Maximum feed rate in the Z-axis: 400 mm Maximum spindle speed: 8000 1/min Length: 2500 mm Width: 1400 mm Height: 1700 mm Weight: 2300 kg

Inv. Num. : 8242 Type: VC 560 Producer: Spinner Created: 2007 Parameters: Control system: Siemens Work table length: 650 mm Work table width: 480 mm Maximum vertical spindle speed: 6000 1/min X-axis travel: 560 mm Y-axis travel: 400 mm Travel Z axis: 400 mm Cone: SK 40 Number of all tools: 16 pieces Equipment: Cooling

- Condition: Presentation Machine - Baking Plate Amount: 59 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 7,000 pieces / Hour - Cone Size: approx. 40 mm Equipment: - incl. Drum Roller - incl. Cooling Conveyor - incl. Packing Conveyor

- Condition: Presentation Machine - Usable volume: 210 L - incl. Control - incl. Pump to empty out

- Condition: Presentation Machine - Usable volume: 210 L - on Weighing Cells