bobst sp used for sale

Output conveyor for Horizon SPF 20A / FC-20

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 131 mm -Groove width: 27 mm -Dimensions: see photo technical drawing -Dimensions: 151/70/H42 mm -Weight: 2,1 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 173 mm -Groove width: 42 mm -Dimensions: see photo technical drawing -Dimensions: 205/82/H46 mm -Weight: 3.3 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 208 mm -Groove width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 230/80/H50 mm -Weight: 4.3 kg

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 141 mm -Dimensions: see photo technical drawing -Dimensions: 157/72/H108 mm -Weight: 1.8 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 110/60/H98 mm -Weight: 1.3 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 83 mm -Dimensions: see photo technical drawing -Dimensions: 100/72/H83 mm -Weight: 1.2 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 101 mm -Dimensions: see photo technical drawing -Dimensions: 117/83/H140 mm -Weight: 1.8 kg

Make : Trepko Filling Machine Cup Type : Split Cup Filling : Cereals and Yoghurt Condition : Good Pick and Place device for cup in Trays

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 106 mm -Dimensions: see photo technical drawing -Dimensions: 125/95/H90 mm -Weight: 1.8 kg

Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Truss type: 125|17 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,400 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load and the hook heights, the load-bearing capacity of the hook tab must also be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 108 mm -Dimensions: see photo technical drawing -Dimensions: 124/73/H130 mm -Weight: 1.8 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 109/57/H157 mm -Weight: 1.2 kg

Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Truss type: 125|14 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,100 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load and the hook heights, the load-bearing capacity of the hook tab must also be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: sendz. galvanized Truss type: 125|14 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,100 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load, and the hook heights the load-bearing capacity of the hook tab be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 179 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 205/80/H155 mm -Weight: 5.0 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 143 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 166/57/H115 mm -Weight: 1.7 kg/pc.

machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice type Q94160 -Clamping jaws: 160 x 40 mm -Clamping depth: 205 mm -Dimensions: 405/160/H115 mm -Weight: 28.5 kg

tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 150 mm -Dimensions: see drawing in the photos -Dimensions: 210/105/H240 mm -Weight: 7.0 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 167 mm -Dimensions: see photo technical drawing -Dimensions: 190/60/H135 mm -Weight: 3.4 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 142 mm -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Dimensions: 190/67/H45 mm -Weight: 2.0 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 450 x 6 TB 4040 -V-belt width: 17 mm -Mounting: Taper bushing Ø 80 mm (can be changed) -Dimensions: Ø 455 x 120 mm -Weight: 42 kg

Industrial robot Manufacturer: Kuka Type: KR16-2 S (Speed) Year of construction: 2012 Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka Control KRC4 Weight: 145 kg Software version V8.3.40 Interface X11 Kuka Touch Panel Kuka Interconnectors

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 315 x 6 -V-belt width: 17 mm -Mounting: Taper bushing Ø 75 mm (can be changed) -Dimensions: Ø 320 x 120 mm -Weight: 28 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 3-groove pulley type SPA 355x3 -V-belt width: 13 mm -Mounting: Taper bushing Ø 48 mm (can be changed) -Dimensions: Ø 360 x 50 mm -Weight: 14 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 8-groove pulley type SPB 224x8 TB 3535 -V-belt width: 17 mm -Mounting: Taper bushing Ø 60 x 90 mm (can be changed) -Dimensions: Ø 230 x 160 mm -Weight: 25 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPA 300 4 3020 -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg

Depositor / In-Feed Conveyor for Horizon SPF 20A (new, never used with equipment)

number: 10 Stk. clamping range: 15 - 50 mm : 28 mm weight: 10 kg dimensions: 0,3 x 0,3 x 0,2 m Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available -Price: per piece -Dimensions: 440/200/H490 mm -Weight: 26 kg

Design: Eurocode 1, Volume : 22 m3 disambled

Inner diameter: 150 mm Grinding depth: 200 mm Table lift: 425 mm large oscillating circuit diameter: 250 / 420 mm Bore: 80 mm Table speed -infinitely-0.5 - 10 m/min Workpiece speeds: 125/176/246/350 rpm Spindle speed: 17000 rpm Total power requirement: 2.2 / 0.5 / 0.9 kW Machine weight ca. 2 t Space requirement approx. 2.40 x 1.20 x 1.45 m Control: conventional

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley -V-belt width: 17 mm -Holder: Ø75 x 90 mm taper clamping bush 90 x 90 NE (Ø can be changed) -Dimensions: Ø320 x 100 mm -Weight: 32 kg

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley SPB-200-5 -V-belt width: 17 mm -Holder: Ø60 x 50 mm taper clamping bush 3020 (Ø can be changed) -Dimensions: Ø200 x 100 mm -Weight: 12.1 kg

Number of spindles: 6 St. Working width: 250 mm Working height: 150 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. weight: 4770 kg Dimensions (L/W/H): 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine vice, stable vice, drill press vice -Machine vice: clamping jaws 175 x 50 mm -Clamping depth: 125 mm -Dimensions: 520/200/H125 mm -Weight: 44.7 kg

length: 34 mm internal diameter: 2 - 13 mm amount: 14 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley -V-belt width: 17 mm -Hole: Ø38 x 96 mm -Dimensions: Ø150 x 180 mm -Weight: 6.5 kg

Seewer Rondo Cutting Line / Cutting Table Type: SPF602 with guillotine  with multiple reels Strap width: 64cm, very good condition Stainless steel cladding  on castors Dimensions: Height: 185cm Width: 660cm Depth: 80cm

Vacuum cleaner motor, radial blower for sweeper, radial blower, fan, blower -Manufacturer: SPAL, radial fan from sweeper Hako Hamster 500 E -Type: 008-B37/C-42D -Voltage: 24 V -Connection input: Ø 70 mm -Connection output: 100 x 45 mm -Dimensions: 150/120/H145 mm -Weight: 0.7 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 143 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 170/60/H140 mm -Weight: 2.0 kg/piece

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley type SPB 190x5 -V-belt width: 17 mm -Receptacle: Cone Ø 100 - 107 mm for taper bushing TB 3020 -Quantity: 1x pulley available -Dimensions: Ø 198 x 105 mm -Weight: 9 kg.

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 13 mm -Mounting: Taper bushing Ø 28 x 25 mm (can be changed) -Dimensions: Ø 118 x 35 mm -Weight: 1.7 kg

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories

- E L B - HIGH-PRECISION ROTARY TABLE SURFACE GRINDING MACHINE TYPE: ROTARY 80 SPS-NK / YEAR OF CONSTRUCTION 2002 = GRINDING DIAMETER : 800 mm GRINDING HEIGHT : 400 mm (from work table) TABLE LOAD : 300 kg Machine dimensions : 2800 X 2800 X 2660 mm ( WxDxH) Machine weight : 5,500 kg Motor version : DS flange motor Grinding spindle drive : 10 kW Grinding spindle speed : adjustable via frequency controller Grinding spindle cone : 60 mm Grinding wheel : 400x100x127 mm Control voltage : 24V DC Installed power : 20KW Fuse : 50A FULL ROOM COVERAGE