bobst sp used for sale

Key data: 520 , 9

L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE

machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice drilling machine vice -Clamping jaws: 100 x 45 mm -Clamping depth: 75 mm -Dimensions: 230/140/H60 mm -Weight: 2.7 kg

V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -V-belt pulley: 4-groove pulley 280/4 -V-belt width: 17 mm -Taper bushing mount: Ø 65 mm (can be replaced) -Quantity: 1x V-belt pulley available -Dimensions: Ø 287 x 82 mm -Weight: 14.4 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 250/4 -V-belt width: 17 mm -Receptacle: Ø 100 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 260 x 82 mm -Weight: 5.8kg

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

V-belt pulley, belt pulley -V-belt pulley: pulley 1 grooved 200/1 with bearing - V-belt width: 17 mm -Intake: Ø 45 mm -Number: 1x pulley available -Dimension: Ø 186 x 32 mm -Weight: 5.5kg

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new Accesories: SK 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with se ...

5-Axis Horizontal Machining Center with Pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D control Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazines. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234

Machine vise, heavy duty vise, drill press vise -Handover: in the current condition as seen -Base plate: See photos for damage -Machine vice: rotatable, clamping jaws 160 x 40 mm -Clamping depth: 185 mm -Dimensions: 445/225/H145 mm -Weight: 33 kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 3-groove pulley 250/4 -V-belt width: 17 mm -Taper bushing mount: Ø 100/107 x 52 mm (can be replaced) -Dimensions: Ø 257 x 65 mm -Weight: 11 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 4 grooves -V-belt width: 17 mm -Intake: Ø65 x 65 mm -Dimension: Ø257 x 80 mm -Weight: 10.5kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 5 grooves -V-belt width: 17 mm -Intake: Ø38 x 90 mm -Dimension: Ø250 x 135 mm -Weight: 18.3 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 7 grooves -V-belt width: 17 mm -Intake: Ø69 mm -Dimension: Ø330 x 140 mm -Weight: 29 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 4 grooves -V-belt width: 17 mm -Intake: Ø65 mm -Dimension: Ø290 x 82 mm -Weight: 15 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 14 grooves -V-belt width: 22 mm -Intake: Ø110 x 250 mm -Dimension: Ø325 x 365 mm -Weight: 88 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 10 grooves -V-belt width: 17 mm -Taper bushing recording: Ø 114 x 126 mm (can be changed) -Dimension: Ø290 x 195 mm -Weight: 31kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 9 grooves -V-belt width: 22 mm -Intake: Ø130 mm -Dimension: Ø365 x 240 mm -Weight: 52 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 9 grooves -V-belt width: 22 mm -Taper socket recording: Ø 95 mm (can be changed) -Dimension: Ø365 x 240 mm -Weight: 66kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 8 grooves SPC 300 8 -V-belt width: 22 mm -Receptacle: Ø132/145 mm for taper clamping bush TB 4040 (can be changed) -Dimensions: Ø300 x 215 mm -Weight: 44 kg

Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock Super 4 The scope of delivery includes: 01x pallet rack traverse, used Material color: sendzimir galvanized Truss type: SLO 89|2 Box profile: 89 x 50 mm Agraffe: 4 HK (hook) clear width: 3,095 mm

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 5 grooves, type SPA 140-5 -V-belt width: 13 mm -Receptacle: Ø42 x 45 mm taper clamping bushing 2517 (can be changed) -Dimension: Ø146 x 80 mm -Weight: 4.9kg

Ref.-No. 00736 Name of the system extraction system + classifier Manufacturer sybrandy Model PF 4 L Spez Year of construction 07 - 2014 Kw 3KW Capacity 3.400m3/h Cartridge SYB325-1200 Operating hours 22 h

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 5 grooves, type SPA 140-5 -V-belt width: 13 mm -Receptacle: Ø42 x 45 mm for taper clamping bushing 2517 (can be changed) -Dimension: Ø146 x 80 mm -Weight: 3.7kg

Wrightfield Spray glazer Stainless frame, stainless mesh belt, belt width 850mm, variable speed, recirculation pump, mobile, 3Ph

V-belt pulley, belt pulley -V-belt pulley: Pulley 9 grooves -V-belt width: 22 mm -Intake: Ø100 x 210 mm -Dimension: Ø325 x 240 mm -Weight: 62 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 10 grooves, unused -V-belt width: 22 mm -Taper bushing recording: Ø 100 x 100 mm (can be changed) -Dimension: Ø325 x 265 mm -Weight: 66 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 12 grooves -V-belt width: 17 mm -Intake: Ø85 x 175 mm -Dimension: Ø260 x 235 mm -Weight: 40 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 8 grooves -V-belt width: 17 mm -Receptacle: Ø 97/90 x 60 mm for taper clamping bush (Ø can be changed) -Dimensions: Ø 225 x 157 mm -Weight: 18kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 4 grooves -V-belt width: 17 mm -Intake: Ø75 x 140 mm -Dimension: Ø260 x 140 mm -Weight: 15 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 4 grooves -V-belt width: 17 mm -Receptacle: taper bushing Ø 48 x 50 mm (can be changed) -Dimensions: Ø 260 x 80 mm -Weight: 26.1kg

V-belt pulley, belt pulley -V-belt pulley: pulley 1 groove -Item No.: G194509 9 / Z 10 950 / JDM 215 -V-belt width: 25 mm -Intake: Ø 30 x 38 mm -Dimension: Ø 340 x 100 mm -Weight: 7 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 160-4 -V-belt width: 13 mm -Receptacle: Ø 55 mm taper bushing 2517-55 (can be changed) -Quantity: 1x V-belt pulley available -Dimensions: Ø 167 x 65 mm -Weight: 5.8kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley -V-belt width: 17 mm -Receiver: Taper bushing Ø45 x 50 mm (can be replaced) -Dimensions: Ø 220 x 80 mm -Weight: 13.1 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: 4-groove pulley 4SPB 3020 55 -V-belt width: 17 mm -Receptacle: Ø 55 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 255 x 80 mm -Weight: 14kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 5 grooves type SPA 160x5 2517 -V-belt width: 13 mm -Receptacle: Ø55 x 45 mm taper clamping bushing 2517 (can be changed) -Dimension: Ø165 x 80 mm -Weight: 6.3kg

V-belt pulley, pulley -V-belt pulley: 4-groove pulley 4SPB 224 -V-belt width: 17 mm -Receiver: without bore -Number: 2x pulleys available -Price: per piece -Dimensions: Ø 230 x 80 mm -Weight: 11.8 kg/pc.

V-belt pulley, pulley -V-belt pulley: pulley with 8 grooves -V-belt width: 17 mm -Holder: Ø 80 x 160 mm, groove 22 mm -Hole spacing: 130mm M16 -Dimensions: Ø 212 x 160 mm -Weight: 28.5 kg

CNC lathe, brand Spinner, TypeTC67H-MC, YEAR 1999 with chip conveyor, underlays, various tools. The price is net.

V-belt pulley, pulley -V-belt pulley: pulley with 6 grooves -V-belt width: 17 mm -Holder: Ø38 x 80 mm -Dimension: Ø205 x 120 mm -Weight: 12.4 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 250 mm -Dimensions: see drawing in the photos -Dimensions: 285/180/H280 mm -Weight: 21.6 kg

Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Type: SPA 12/25 RP Type: Hydraulic power pack Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

Moving steady rest, moving steady rest, steady rest, lynette -Bezel: traveling -Top height: approx. 192 mm -Plating: brass -Dimensions: see photos / technical drawing -Quantity: 2x bezel available -Price per piece -Dimensions: 220/60/H325 mm -Weight: 2.4 kg/pc.

Machine vice, stable vice, drill press vice -Machine vice: clamping jaws 150 x 50 mm -Clamping depth: 143 mm -Groove: 104 x 17 mm -Dimensions: 455/170/H125mm -Weight: 25 kg

working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Tip height: approx. 170 mm -max. passage: Ø 75 mm -Dimensions: see photos / technical drawing -Dimensions: 365/90/H375 mm -Weight: 10.9 kg.

Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Tip height: 180 mm -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 340/70/H380 mm -Weight: 6.3 kg.

air flow quantity: 1650 m³/h suction power: . kPa power capacity: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 17 mm -Mounting: Taper bushing Ø 40 x 30 mm (can be changed) -Dimensions: Ø 187 x 44 mm -Weight: 5.7 kg